Answer:
Kindly, Refer to the attachment...A student conducts an experiment in which a cart is pulled by a variable applied force during a 2 s time interval. In trial 1, the student exerts the force on a cart of mass M. In trial 2, the student exerts the force on a cart of mass 3M. In trial 3, the student exerts the force on a cart of 5M. In which trial will the cart experience the greatest change in momentum from 0 s to 2 s?
Answer:
The answer is "Including all three studies of 0s to 2s, that shift in momentum is equal".
Explanation:
Its shift in momentum doesn't really depend on the magnitude of its cars since the forces or time are similar throughout all vehicles.
Let's look at the speed of the car
[tex]F = m a\\\\a =\frac{F}{m}[/tex]
We use movies and find lips
[tex]\to v = v_0 + a t\\\\\to v = v_0 + (\frac{F}{m}) t[/tex]
The moment is defined by
[tex]\to p = m v[/tex]
The moment change
[tex]\Delta p = m v - m v_0[/tex]
Let's replace the speeds in this equation
[tex]\Delta p = m (v_0 + \frac{F}{m t}) - m v_0\\\\\Delta p = m v_0 + F t - m v_0\\\\\Delta p = F t[/tex]
They see that shift is not directly proportional to the mass of cars since the force and time were the same across all cars.
Geologists know the past temperature of the planet based on rock and fossil evidence. Why do you think it is difficult to determine what has caused climate change in the distant past?
Answer:
I think it is difficult to determine what has caused climate change in the distant past because it must have been a long time ago so geologists can't carry out different experiments and figure out what gases the planet had conjured, so geologists can only make predictions based off the evidence they currently have from what the planet looked like before. The planet must have changed over the years, therefore the climate has also changed in the future, so they cannot work with how the planet looked in the past.
You have two rocks made of the same material that are at the same
temperature. The first rock has three times the mass of the second rock. How
does the thermal energy of the two rocks compare?
A. The second rock has three times the thermal energy of the first rock
B. The first rick has six times the thermal energy of the second rock
C. The second rock has one-third as much thermal energy as the first rock
D. The rocks have the same amount of thermal energy
Answer:
the rocks have the same amount of thermal energy
Why do specific heat capacity of objects differ ?
Answer:
substances have different melting and boiling points to one another.
Explanation:
Explanation:
Each substance will have a different mass, so when the amount of heat and the change in temperature are held constant, the only variable is the mass. Therefore, because mass is the only variable, so because substances have different masses, they will have different specific heats.
X=Y=MC scourer that would be the answer for you mam or sir
Me das mas información?
Answer:
jello
Explanation:
it jiggles
How much thermal energy is absorbed when 145 g of water at 23ºC is heated until it boils and turns into vapour?
Answer:
the thermal energy absorbed is 46,893 J
Explanation:
Given;
mass of the water, m = 145 g = 0.145 kg
initial temperature of the water, t₁ = 23 ⁰C
final temperature of the water, t₂ = 100 ⁰C
specific heat capacity of water, c = 4,200 J/kg.⁰C
The thermal energy absorbed is calculated as;
H = mcΔt
H = 0.145 x 4,200 x (100 - 23)
H = 46,893J
Therefore, the thermal energy absorbed is 46,893J
A train A travelled a distance of 150 km in 3 hours, whereas, train 'B"
travelled a distance of 180 km in 4 hours. Which train travelled faster?
Answer:
Therefore, Train A is faster with 50km/h and a 5km/h difference
Explanation:
train A
150km/3h = 50km/h
train B
180km/4h = 45km/h
PLS HELP! QUESTION (2/2)
Two blocks, one of mass 1.00 kg and 4.00 kg are tied together with a massless rope as in the image. This rope is strung over a massless, resistance-free pulley. The blocks are released from rest. Find the tension in the rope and the acceleration of the blocks.
For protection hermit crabs use gastropod shells to hide their bodies so only their heads are visible. Students research why the population of hermit crabs has been decreasing. One question hey should ask is-
Answer:
Due to suffocation and toxic paint.
Explanation:
The population of hermit crabs has been decreasing because of suffocation and poison. Many crabs actually die slowly from suffocation because their gills require high humidity in order to breathe properly. Hermit crabs are slowly poisoned by tap water in which the toxic substances present in the paint that dissolves their shells that leads to the death of hermit crabs.
It is common for creatures to be able to live in both the spray zone and low-tide zone.
True or False
Hii!!! The correct answer is true. (:
A spinning wheel on a fireworks display is initially rotating in a counterclockwise direction. The wheel has an angular acceleration of -4.20 rad/s2. Because of this acceleration, the angular velocity of the wheel changes from its initial value to a final value of -26.0 rad/s. While this change occurs, the angular displacement of the wheel is zero. (Note the similarity to that of a ball being thrown vertically upward, coming to a momentary halt, and then falling downward to its initial position.) Find the time required for the change in the angular velocity to occur.
Answer:
The time it takes for the change in the angular velocity to occur is 6.5 seconds
Explanation:
From the question, we have;
The angular acceleration of the wheel, α = -4.20 rad/s²
The final angular velocity of the wheel, ω = -26.0 rad/s
From the information, we have the initial direction of rotation of the wheel = Counterclockwise
The angular displacement while the change occurs = 0 rad/s
Therefore, the initial angular velocity of the wheel, ω₀ = 0 rad/s
We have;
[tex]\alpha = \dfrac{\omega -\omega _0 }{t - t_0}[/tex]
Where;
t - t₀ = The time it takes for the change to occur
[tex]\alpha = \dfrac{\omega -0 }{t - 0}[/tex]
When t₀ = 0, we have;
t - t₀ = t
[tex]\alpha = \dfrac{\omega }{t}[/tex]
[tex]\therefore t = \dfrac{\omega}{\alpha }[/tex]
[tex]\therefore t = \dfrac{-26 \, rad/s}{-4 \, rad/s^2 } \approx 6.5 \, seconds[/tex]
The time it takes for the change in the angular velocity to occur is t - t₀ = 6.5 seconds
An athlete whirls a 8.00 kg hammer m from the axis of rotation in a horizontal circle, as shown in the figure below . The hammer makes one revolution in s. What is the centripetal force on the hammer ?
Answer:
[tex]mv \div r \\ mass \times velocity \div radius[/tex]
who was the fist man on moon
Answer:
Neil Armstrong
Explanation:
Answer:
Neil Armstrong.
Explanation:
. PLEASE GIVE BRAINLIEST.
Two waves have the same amplitude and are traveling through the same medium, but the first wave has a higher frequency. The energy of the first wave is greater than that of the second.
True or false?
Two waves have the same amplitude but they can have different frequencies. The wave with a higher frequency will have greater energy. Therefore, the given statement is correct.
What are frequency and wavelength?The frequency of electromagnetic waves or any wave can be described as the number of oscillations in one second. The frequency can be represented as per second or hertz.
The wavelength of the wave can be defined as the distance between two crests or troughs on a wave that is separated by a distance known as wavelength. The wavelength of the waves is expressed in meters.
The relationship between frequency (ν) and energy of the wave:
E = hν
The frequency of the waves has a direct relation with the energy of the waves. Therefore, the wave which has a higher frequency will carry greater energy whether they have the same amplitude.
Learn more about wavelength and frequency, here:
brainly.com/question/18651058
#SPJ2
Calculate the work done when lifting a sack of potatoes with a force of 100N vertically
6m.
Answer:
600J
Explanation:
W=Fd so, W=100*6=600J
When solar energy is converted to thermal energy, how is the thermal energy used? Check all that apply.
to provide air conditioning
to cool refrigerators
to heat spaces in buildings
to heat water
Answer:
to heat spaces in buildingss
Explanation:
Brainliest for correct answers :)
Please look at both pictures and answer correctly for brainliest
Answer:
a. 1100 meters.
b. Between B and C
c.1. Between point D and E
c2. Between point D and E
d. 3.7 m/s.
Explanation:
The girl travels the distance of 1100 meters from starting to the end. There is no motion occurs between B and C due to no change of distance value from 200 meters. Between point D and E, the girls covers 500 meters long distance and also covers fastest distance between point D and E because between point D and E, the girl covers 500 meters distance in 30 seconds which is the highest of all. The average speed of the girls is 3.7 meter/seconds if we divide total distance i.e. 1100 meters by time which is 300 seconds.
4) A drag racer starts her car from rest and accelerates at 10.0 m/s² for a distance of 400 m (1/4 mile). (a) How long did it take the race car to travel this distance? (b) What is the speed of the race car at the end of the run?
Answer:
A) s=1/2at^2
t=√(2s/a)=√(2x400)/10.0)=9.0s
B) v=at
v=10.0x9=90m/s
what is the equation for net force
Answer:
Is to add all forces, for example either the gf = gravitational force
Ff= force fiction
Fn= normal force
Thus, fg + ff + fn = y will give you results
Well then the forces you use in your exercises or questions.
The equation for net force is: ΣF = ma
or, ΣF = Δp/Δt.
What is force?The definition of force in physics is: The push or pull on a massed object changes its velocity.
An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude. The application of force is the location at which force is applied, and the direction in which the force is applied is known as the direction of the force.
A spring balance can be used to calculate the Force. Newton is the SI unit of force.
Hence, net force applied on the object = mass × acceleration
ΣF = ma
It can be written in another from as:
net force applied on the object = change in momentum ÷ time interval
ΣF = Δp/Δt
So, the equation for net force is: ΣF = ma
or, ΣF = Δp/Δt.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ2
If a person perceives that he has some control over his environment, he most likely will handle stress:
a.poorly
b.by retreating from the stress
c.the same as everyone else
d.better than if he doesn't feel in control
2 kg
T2
5 kg
2.1.1 State Newton's Second Law of Motion in words.
.1.2 Draw a labelled free body diagram for the 2 kg mass.
1.3 Determine the magnitude of the tension force T2.
1.4 Calculate the magnitude of the normal force exerted on the 2 kg mass,
Answer:
2500 and kg its is very easy do with method
A 150-newton force, applied to a wooden crate at an angle of 30° above the horizontal, causes the crate to travel at constant velocity across a horizontal wooden floor.
1. Calculate the magnitude of the normal force exerted by the floor on the crate. [Show all work, including the equation and substitution with units.]=
The mechanical equilibrium condition allows to find the value of the normal for the body is:
The normal is: N = 23 NEquilibrium equation.Newton's second law establishes a relationship between the force, the mass and the acceleration of bodies, in the special case that the acceleration is zero, it is called a mechanical equilibrium condition.
∑ F = 0
A free body diagram is a diagram of the forces without the details of the bodies, in the attachment we can see this diagram, let's write the equilibrium condition for each axis.
x- axis
Fₓ -fr = 0
y-axis
F_y + N – W =0
Let's use trigonometry to find the components of the applied force.
Cos 30= [tex]\frac{F_x}{F} [/tex]
sin 30 = [tex]\frac{F_y}{F } [/tex]
Fₓ = F cos 30
[tex]F_y[/tex] = F sin 30
The weight of a body is the mass times the acceleration due to gravity.
W = m g
Let's substitute.
F sin 30 + N – m g = 0
N= m g – F sin 30
Let's calculate.
N = m 9.8 – 150 sin 30
N = m 9.8 - 75
To finish the calculation, the mass of the body must be known, suppose a value of 10 kg.
N=10 9.8 -75
N = 23N
In conclusion using the mechanical equilibrium condition we can find the value of the normal for the body is:
The normal is N = 23 NLearn more about the mechanical equilibrium condition here: brainly.com/question/12804448
PLEASE HELP ME
NEED IT FAST WILL GIVE B !! If correct
Answer:
25% :)
Explanation:
Hahah I look pregnant don’t I
What is the mass of a 50kg object in space with no gravity?
Answer:
The answer would be 0kg.
Your welcome.
If you place apiece of foil, a piece of black fabric, and a white sheet of paper all the same size in the sun for five minutes, which would absorb the most heat. Which would absorb the least heat? Briefly explain why.
The two objects we need to make electricity are
Answer:
Explanation:
.
PLEASE HELP!!!!!!!!!!!!!
a. A light wave travels through glass (n=1.5) at an angle of 28°. What angle does it have when
it passes from the glass into water (n = 1.33)?
B. Draw a ray diagram to locate the image of the object below. Write one or two sentences to describe the type of image, it’s size relative to the object, and it’s position with respect to the lens.
C. An object is located 94.0 cm from a concave mirror. The focal length is 34.0 cm. What is the image distance? Is the image real or virtual??
D. An Object is located 65.0 cm from a concave lens. The image distance is -11.8 cm. What is the magnification?
E. For a person who is nearsighted, seeing objects that are far away is difficult. The light from these objects does not get focused far enough back in the eye. Write one or two sentences to identify the type of lens that can be used to correct nearsightedness and describe why it works.
PLEAAAASE HELP MEEE
Answer:
A. The angle with which the light passes from glass into water is approximately 31.97°
B. The image formed is, real, inverted, and smaller than the object
C. The image distance is 53.2[tex]\overline 6[/tex] cm
The image is real
D. The magnification is approximately 0.182
E. The type of lens required is a concave lens which corrects the focus of a powerful eye lens or a long eyeball
Explanation:
The given parameters for the light wave are;
The refractive index of the glass medium, n₁ = 1.5
The angle of incidence of the light, θ₁ = 28°
The refractive index of water, n₂ = 1.33
A. Let θ₂ represent the angle with which the light passes from glass into water
Snell's law is mathematically stated as follows;
n₁·sin(θ₁) = n₂·sin(θ₂)
According to Snell's law, we have;
1.5 × sin(28°) = 1.33 × sin(θ₂)
sin(θ) = (1.5 × sin(28°))/1.33 = 0.52947920615
∴ θ₂ = arcsin(0.52947920615) ≈ 31.97°
The angle with which the light passes from glass into water, θ₂ ≈ 31.97°
B. Please find attached the drawing of the image created with Microsoft Visio
From the drawing, we have that the image formed is real inverted smaller than the object and between the focus and radius of curvature
C. The location of the object from the mirror, u = 94.0 cm
The focal length of the mirror, f = +34.0 cm
The mirror formula for a concave mirror is given as follows;
[tex]\dfrac{1}{f} = \dfrac{1}{u} + \dfrac{1}{v}[/tex]
Therefore, we have;
[tex]\dfrac{1}{34.0} = \dfrac{1}{94.0} + \dfrac{1}{v}[/tex]
[tex]\dfrac{1}{v} = \dfrac{1}{34.0} - \dfrac{1}{94.0} = \dfrac{15}{799}[/tex]
[tex]\therefore \dfrac{v}{1} = v =\dfrac{799}{15} = 56.2\overline 6[/tex]
The image distance, v = 799/15 = 53.2[tex]\overline 6[/tex] cm
Therefore the image is in front of the mirror, which is a real image
The image is real
D. The given parameters of the object and lens are;
The distance of the object from the lens, u = 65.0 cm
The distance of the image formed from the lens, i = -18 cm
The magnification, M, is given as follows;
[tex]M = \dfrac{-v}{u}[/tex]
Therefore;
[tex]M = \dfrac{-(-11.8)}{65.0} = \dfrac{59}{325} \approx 0.18153846153[/tex]
The magnification, M ≈ 0.182
E. For a person who is near sighted, the light from objects from distant location are almost parallel and are brought to a focus in front of the retina and therefore, they appear blurred
The use of a concave lens is required to correct nearsightedness as it causes the light to appear come from a point before the focus such that the divergent rays of the object refracted through the concave lens comes to a focus at the.
En un recipiente con mercurio (13.6 gr/cm3) se sumerge completamente un cuerpo de 900 gramos de masa. AL medir su peso aparente este marca 2.94 newton en el dinamómetro. Cual es la densidad del cuerpo (kg/m3)
Answer:
ρ = 20.4 kg / m³
Explanation:
For this exercise we use Archimedes' principle, the thrust on a submerged body is equal to the weight of the released liquid
B = ρ g V_liquid (1)
let's write the equilibrium equation
F -W + B = 0
B = W -F
let's calculate
B = 0.900 9.8 - 2.94
B = 5.88 N
From equation 1
V_{liquid} = [tex]\frac{B}{\rho_{Hg} g}[/tex]
V_{liquid} = [tex]\frac{5.88}{13.6 \ 10^3 \ 9.8}[/tex]
V_{liquid} = 4.41176 10⁻⁵ m³
in this case it is indicated that the body is completely submerged
V_body = V_liquid = V
the definition of density is
ρ = m / V
ρ = [tex]\frac{0.900 \ 10^{-3}}{ 4.41176 \ 10^{-5} }[/tex]
ρ = 2.04 10¹ kg / m³
ρ = 20.4 kg / m³
Empty inverted glass is not immersed in water, why?
Answer:
It is hard to push the empty upside down mug inside the water as it has air present inside its cavity which prevents the water from entering inside the mug.
I hope this helps a little bit.