The beat frequency is always equal to the difference in frequency between the two notes that interact to create the beats.
How do you find the beat frequency of two sounds?The absolute difference between the two waves can be used to compute it. As a result, here's how to determine the beat frequency of two waves: Take the absolute value by subtracting the first wave's frequency from the second wave's frequency.The total value of the two waves' frequencies' difference is equal to the beat frequency. Beat frequency is the number of beats per second that corresponds to the difference in two waves' frequencies.Beat Frequency Calculation is given:First wave frequency 5Hz
Second wave frequency 227Hz
Beat frequency 〰️222Hz.
To Learn more About beat frequency refer to :
https://brainly.com/question/14157895
#SPJ4
A truck is traveling clockwise around a circular track at a constant speed of 10 m/s.
The track is flat and has a radius of 100 m. While driving around the track, the driver
is describing his experience to his driving coach:
"The whole time I'm traveling around the track, I feel like I'm being pushed to the left
even though I'm constantly turning right. I'm always leaning toward the outside of
the circle."
Which best explains the Physics concept of why the driver felt this?
The best suitable answer is Option 4 " The driver experienced centrifugal "force" which was actually just his inertia .
What is centrifugal force ?
A hypothetical force called centrifugal force, which is unique to particles travelling in a circle, is a force that has the same strength and dimensions as the centripetal force, but acts in the opposite direction.
A stone rotating in a horizontal plane while attached to a string that is fastened to a ground-based post experiences a constant change in velocity and acceleration in the direction of the post. The square of the speed divided by the length of the string gives us the acceleration.
To learn more about the centrifugal force ,click the link ;
https://brainly.com/question/954979
#SPJ13
the amount of net force required to keep a 15-kg object moving rightward with a constant velocity of 3 m/s is .
The net force required to move the object of mass 15 kg and constant velocity is 0N
The mass of the object = 15 kg
The object is moving with a constant velocity = 3 m/s.
The net force required to move the object can be calculated by using the formula,
F = ma
where F is the force
m is the mass
a is the acceleration.
The acceleration is nothing but a rate of change of velocity (i.e. a = v/t). But for a constant velocity, the acceleration will be zero. Because there will be no change in velocity.
Therefore, the net force is
F = 15 x 0
= 0 N
Therefore, the net force is 0 N
Learn more about the force in
https://brainly.com/question/1046166
#SPJ4
what would be your best estimate for the normalized ground state wavefunction of the quartic oscillator?
The variational technique is one strategy to approximate the ground state with the lowest energy and some stimulated states in quantum mechanics.
What is variational method principle in quantum mechanics?This makes it possible to calculate approximations of wavefunctions, like molecular orbitals. The variational concept serves as the method foundation. The process entails selecting a "trial wavefunction" based on one or more parameters, then identifying these parameters values that result in the energy expectation value being as low as possible. By setting the parameters to these values, a wavefunction that approximates the ground state wavefunction is produced, and the energy in that state's expectation value serves as an upper bound on the ground state energy.
To Learn more About quantum mechanics refer to :
https://brainly.com/question/26095165
#SPJ4
a block of mass 0.260 kg is placed on top of a light, vertical spring of force constant 5 025 n/m and pushed downward so that the spring is compressed by 0.106 m. after the block is released from rest, it travels upward and then leaves the spring. to what maximum height above the point of release does it rise? (round your answer to two decimal places.)
A block of mass 0.260 kg is placed on top of a light, vertical spring of force constant 5 025 n/m and pushed downward. After the block is released, the spring will travel upward to the maximum height of 10.86 meters.
The relation between the potential energy on a string and the length it stretches is given by:
E = 1/2 . kx²
Where:
k = spring constant
x = spring stretch or compression
In the given problem:
k = 5,025 N/m
x = 0.106 m
Hence,
E = 1/2 . 5025 . (0.106)²
m . g . h = 1/2 . 5025 . (0.106)²
Where;
m = mass
h = height from the release point.
Hence,
0.260 x 10 x h = 28.23
h = 10.86 m
Therefore, the spring will travel upwards up to 10.86 m
Learn more about potential energy here:
https://brainly.com/question/21021510
#SPJ4
Heyyyy...Please i need helppp
anticlockwise = clockwise (Force*distance)
1 * 20 = 2 * x
x = 10
va car with a mass of 950-kg and a speed of 22 m/s approaches the intersection from the west. a 1300-kg minivan traveling 15 m/s approached the intersection from the south. after the collision two cars move together. what is their speed and direction of the velocity?
The final speed of the car and minivan is 17.95 m/s
The mass of the car = 950 kg
The speed of the car = 22 m/s
The mass of the minivan = 1300 kg
The speed of the minivan = 15 m/s
The final speed of the car and minivan can be found using the conservation of momentum formula,
[tex]\displaystyle m_{1}v_{i1 } + m_{2}v_{i2} = m_{1}v_{f1} + m_{2}v_{f2}[/tex]
where [tex]\dispplaystyle m_{1}[/tex] is the mass of the car
[tex]\dispplaystyle m_{2}[/tex] is the mass of the minivan
[tex]\dispplaystyle v_{i1}[/tex] and [tex]\dispplaystyle v_{i2}[/tex] is the initial speed of the car and minivan respectively.
[tex]\dispplaystyle v_{f1}[/tex] and [tex]\dispplaystyle v_{f2}[/tex] is the final speed of the car and minivan respectively.
As the two cars move together, they would have the same final speed, i.e.
[tex]\dispplaystyle v_{f1} = \dispplaystyle v_{f2} = \dispplaystyle v_{f}[/tex]
Thus, the above equation becomes,
[tex]\displaystyle m_{1}v_{i1 } + m_{2}v_{i2} = (m_{1} + m_{2})v_{f}[/tex]
Let us substitute the known values in the above equation, we get
(950 x 22) + (1300 x 15) = (950 + 1300) [tex]\displaystyle v_{f}[/tex]
20,900 + 19.500 = 2,250 [tex]\displaystyle v_{f}[/tex]
40,400 = 2,250[tex]\displaystyle v_{f}[/tex]
40,400 / 2,250 = [tex]\displaystyle v_{f}[/tex]
= 17.95 m/s
Therefore, the final speed is 17.95 m/s
Learn more about the conservation of momentum in
https://brainly.com/question/1603406
#SPJ4
two cars, car x and car y, are moving with the same velocity, and slam on the brakes coming to a stop. car x is more massive than car y. for which car is the amount of work done by friction in stopping it the highest?
The amount of work done by friction in stopping the car is given as
Wx > Wy.
There are two cars moving with the same velocity
car X is more massive than car Y
mass of car X = Mx
mass of car Y = My
here given, Mx > My
The distance travelled will be the same as the initial velocity, and it is independent of mass.
Let, μ be the coefficient of kinetic friction
work done by the frictional force is given as:
F = μMg
Fx = μMxg
Fy = μMyg
W = F.s
Wx = μMxg.s
Wy = μMyg.s
Wx > Wy
The amount of work done by friction in stopping the car is given as
Wx > Wy.
To know more about work done
https://brainly.com/question/13662169
#SPJ4
a 500.0 kg elevator is pulled upward with a constant force of 5500.0 n for a distance of 50.0 m. what is the work done by the 5500.0 n force on the elevator?
The work done by the constant force to pulled the elevator upward is 275000 Joules.
The work done by any force is given by,
W = Fa
Where,
W is the work done,
F is the force applied,
s is the displacement along the direction of the force,
The force applied on the elevator to pull it upward is 5500N and the distance to which the elevator is pulled is 50 m.
Now, putting values,
W = 5500(50)
W = 275000 Joules.
So, the work done by the force to pull the elevator upward is 275000 Joules.
To know more about Work, visit,
https://brainly.com/question/25573309
#SPJ4
spherical sound waves are emitted from a 0.80-w source. assuming that the energy of the waves is conserved, what is the intensity at 0.40 m from the source?
The intensity of the sound at a distance of 0.40 m from the source is 0,398 W/m²
Sound wavesSound waves are classified as a longitudinal wave where the direction of propagation is parallel to the direction of vibration.
Sound intensity is formulated as follows:
I = P / A
I = Sound Intensity (W/m²)
P = Power of the Sound Source (W)
A = Area of the field through which the sound wave passes (m²)
Since the sound wave propagates in all directions, the area of the field traversed by this sound wave will form the surface area of the sphere, then:
I = P / (4πR²)
R = Surface radius (m)
So, The intensity of the sound at a distance of 0.40 m from the source is:
I = P / A
I = P / ( 4π . R² )
I = 0,80 / ( 4π . (0,4)²)
I = 0,398 W/m²
Learn more about sound waves here: https://brainly.com/question/16093793#SPJ4
How do plates move in relation to each other at convergent boundaries?
When plates commute in the exact direction it collides, and the plates move to other at convergent boundaries.
The lighter, dense, and much more elastic oceanic plate dips underneath the thicker, more stiff continental plate whenever a continental plate encounters a marine plate.
It's known as subduction. Deep ocean trenches, like the one that runs down South America's west coast, are created by subduction.
The continent's undercut rocks start to melt. On occasions, a chain of eruptions forms as the hot magma rises to the surface and travels through the continent.
Nearly 80% of earthquakes happen along convergent borders when plates are being pushed together.
Destruction, when two continental plates crashes, is just another kind of convergent boundary. The plates collapse and are propelled upward since neither is heavier compared to the other.
Read more about convergent boundaries here
https://brainly.com/question/28002759
a 10-kg object is on a table, the coefficient of static and kinetic friction between the object and the table is 0.4 and 0.2, respectively. calculate the frictional force applied on the object if a horizontal force of 50n is applied on the object? (free-fall acceleration g
The frictional force applied on the object if a horizontal force of 50N is applied on the object is 19.6 N
N = m g
N = Normal force
m = Mass
g = Acceleration dur to gravity
m = 10 kg
g = 9.8 m / s²
N = 10 * 9.8
N = 98 N
f = μ N
f = Frictional force
μ = Co-efficient of friction
For static friction,
μ = 0.4
f = 0.4 * 98
f = 39.2 N
For kinetic friction,
μ = 0.2
f = 0.2 * 98
f = 19.6 N
Since Applied force of 50 N is greater than the static frictional force of 39.2 N, the frictional force acting on the object is frictional force.
Therefore, the frictional force applied on the object is 19.6 N
To know more about frictional force
https://brainly.com/question/19180015
#SPJ4
the motor of a ski boat generates an average power of when the boat is moving at a constant speed of 12 . when the boat is pulling a skier at the same speed, the engine must generate an average power of . what is the tension in the tow rope that is pulling the skier?
The tension in the tow rope that is pulling the skier is 5283.33 N
since we are given the average power of 2.74 × 10^4 W., with a speed of 12 m/s. So, the tension acting on the motor at this point is :
P= T X v
T = P/v =2.74 × 10^4/ 12 =2283.33 N
For the second case, the average power is 9.20 × 10^4 W, so the tension will be :T = P/v = 9.20 × 10^4 /12 = 7666.66
so the tension in the tow rope is : 7666.66 -2283.33 = 5283.33 N
To know more about speed refer to the link https://brainly.com/question/7359669?referrer=searchResults.
#SPJ4
the motor of a ski boat generates an average power of 2.74 × 10^4 W when the boat is moving at a constant speed of 12 m/s . when the boat is pulling a skier at the same speed, the engine must generate an average power of 9.20 × 10^4 W. what is the tension in the tow rope that is pulling the skier?
an inelastic collision between two objects is characterized by the following a) total momentum of the system is conserved b) total energy of the system is conserved c) total kinetic energy of the system remains constant d) both a and b are true e) both a and c are true
An inelastic collision between two objects is characterized by the fact that a) the total momentum of the system is conserved. Choice A is correct
Inelastic collisions are the collisions in which the kinetic energy is lost. The momentum of the system is conserved in inelastic collisions, but kinetic energy is not. This is because some of the kinetic energy was transferred to another.
Suppose two similar cars are approaching. They collide, but the sled is equipped with a magnetic clutch so that when they collide they combine into a single agglomerate. This type of collision is completely inelastic as the maximum possible kinetic energy is lost. This does not mean that the final kinetic energy of the system is necessarily zero. Momentum is not yet maintained.
Learn more about the inelastic collision in
https://brainly.com/question/14521843
#SPJ4
answer the following questions for projectile motion on level ground assuming negligible air resistance (the initial angle being neither nor ): (a) is the velocity ever zero? (b) when is the velocity a minimum? a maximum? (c) can the velocity ever be the same as the initial velocity at a time other than at ? (d) can the speed ever be the same as the initial speed at a time other than at ?
Explanation
a) The velocity will never be zero. The velocity at the highest point of the projectile will be the smallest, equal to the horizontal component of the initial velocity.
b) The velocity will be zero when the kinetic energy is zero. When kinetic energy is at its lowest, potential energy is at its highest. Because potential energy is greatest at the highest point, velocity is greatest at the highest point.
c) Because a constant force of gravity acts on the projectile at all times, velocity will never be the same as initial velocity.
d) When the bullet bounces back and strikes the ground, the speed equals the initial speed (at t = 0), because the height is zero and the kinetic energy is equal to the initial energy.
To learn more about velocity, refer to
https://brainly.com/question/24681896
#SPJ4
what is vertical wind shear? change in the wind speed and/or direction with height change in the vertical wind with distance north or south change in wind speed with direction north or south change in wind direction with horizontal distance
The correct answer is option D.
Vertical wind shear changes in wind direction with horizontal distance.
Generally, atmospheric wind is referred to as vertical or horizontal wind shear. It is also called wind gradient.
Simply put, win shear is defined as the change in wind speed over a particular distance.
More specifically, vertical wind shear refers to the alter in wind speed along altitude while the horizontal change refers to the change in wind speed that occurs along lateral side or position of the atmosphere in a given altitude.
If you need to learn more about wind click here:
https://brainly.com/question/1420586
#SPJ4
allison has to design a device that converts energy between two different forms. she decides she wants to convert electrical energy into motion and sound. which invention should she model her design after?
The motor is an excellent invention for Allison to use as a model for her device.
People use both interchangeably, but the difference is that motors run on electricity and engines run on combustion. The engine converts various forms of fuels into mechanical force, while the motor transforms electrical energy into mechanical energy.
They operate using principles of electromagnetism, which shows that a force is applied when an electric current is present in a magnetic field. This force creates a torque on a loop of wire present in the magnetic field, which causes the motor to spin and perform useful work.
Learn more about motor here:- https://brainly.com/question/866077
#SPJ4
a proton moves in the direction shown in a uni- form magnetic field. at this instant, which arrow points in the direc- tion of the force on the proton by the magnetic field?
When the proton starts to move upward the direction of the magnetic force changes and when the proton moves straight up the magnetic force turns to the left.
The direction of the force is perpendicular to the direction of the magnetic field and current, as given by Fleming's left-hand rule. Here the magnetic field is to the right and the direction of the current is upward. Protons feel a force on themselves due to the magnetic field. The force on the proton is proportional to the proton's magnetic flux density and velocity.
The velocity and momentum of a proton are affected by the force acting on it. If the velocity of a charged particle is perfectly parallel to the magnetic field, the magnetic field exerts no force on the particle, so the velocity remains constant. The momentum of a proton moving freely in a magnetic field is the product of the proton's mass and the proton's velocity. As the speed of a proton moving in a magnetic field changes, so does the momentum of the proton.
Learn more about The magnetic field here:-https://brainly.com/question/14411049
#SPJ4
50 POINTS!
Write a paragraph that answers the questions below:
If there is a situation that would require a person to use self defense, what offensive strategies would you recommend they use?
What defensive strategies would you recommend they use?
Based on the videos, which move(s) look most effective for offense if there is a situation that would need self defense?
Based on the videos, which move(s) look most effective for defense if there is a situation that would need self defense?
If a person is forced to utilize self-defense, the offensive techniques that should be recommended are as follows:
Take the initiative.I would advise them to employ the following defense strategies:
Keeping your head safeKeeping your elbow between you and the evil person.Based on the films, the move(s) that appear to be the most successful for the offense in a circumstance requiring self-defense are to target the problem rather than the person.
What is an offensive strategy?An aggressive competitive strategy is a form of company strategy that involves actively pursuing industry changes.
Companies that go on the offensive typically make acquisitions and invest extensively in R&D and technology in order to remain ahead of the competition.
Learn more about offensive strategy:
https://brainly.com/question/15935488
#SPJ1
What is the magnitude of the gravitational force between an electron and a proton separated by a distance of 1.0 x 10-10 meter?
A proton and electron separated by 1.0 x 10-10 meters exert 1.0 x 10-47N of gravitational force on each other.
What exactly is gravitational, in simple terms?The gravitational force will bring together any two mass-containing objects. The gravitational force is described as attracting because it consistently tries to draw masses together and never tries to push them apart. In reality, you and every other item in the universe are pulling toward one another.
What is the origin of gravity?
All of the mass on Earth is what creates gravity. The cumulative gravitational attraction of all of its mass exerts pressure on all of the body's mass. Your weight is determined by that. Furthermore, your weight would be lower if you were on a planet with a lower mass than Earth.
To know more about gravitational force visit:
https://brainly.com/question/24783651
#SPJ13
an engineer is working on determining the speed limit for a curved stretch of road. she knows the coefficient of friction between the wheels and the road is 0.7 when the road is dry and 0.3 when the road is wet. she also knows that the mass of the vehicle does not matter, but completes her calculations for a 700kg car. in order to set a speed limit that is safe under any conditions, should she perform her calculations with the coefficient of friction for wet or dry pavement?
The speed limit for a curved stretch of road with the coefficient of friction between the wheels and the road is 0.7 when the road is dry and 0.3 when the road is wet is √ 2.94 r m / s
Fc = m ac
Ff = μ N
N = m g
Fc = Centripetal force
m = Mass
ac = Centripetal acceleration
Ff = Frictional force
μ = Co-efficient of friction
N = Normal force
μ = 0.3 ( Wet value to taken to provide zero skidding under any condition)
g = 9.8 m / s²
The only force that is providing the centripetal force is frictional force.
m ac = μ m g
ac = 0.3 * 9.8
ac = 2.94 m / s²
ac = v² / r
2.94 = v² / r
v = √ 2.94 r m / s
Therefore, the speed limit for the curved stretch of road is √ 2.94 r m / s. She should perform her calculations with the coefficient of friction for wet pavement.
To know more about Centripetal force
https://brainly.com/question/14021112
#SPJ4
a ball tied to the end of a string is being whirled around in a circle at constant speed. what can you say about the work done by the tension in the string on the ball?
The work done by the tension in the string on the ball - tension does no work at all is the correct answer.
What is tension in the string?The forces tugging on the rope from either end cause the tension in a particular strand of string or rope. Keep in mind that force is defined as mass times acceleration. If the rope is stretched tightly, any change in the mass or acceleration of the objects it is supporting will result in a change in the tension of the rope.
A force known as tension is particularly effective on medium-length materials like rope and cable that are also flexible. A gravitational force still exists in tension. When the body is traveling upward, the tension is denoted by the formula T = W + ma. The thickness is the same as T = W - ma when the body descends.
To know more about tension visit:
https://brainly.com/question/28874730
#SPJ4
true or false the newton-raphson method will converge very rapidly when close to finding the root of an equation.
When approaching the root of an equation, the Newton-Raphson method will quickly converge. this is a false.
" Root is a mathematical symbol that stands for the square root symbol or square root sign. In words, we call this symbol radical. The various types of symbols that are used to carry out arithmetic operations may have been covered in your math classes. In mathematics, the square root of any number is denoted by the root symbol.
As an illustration, 2 is used to symbolize the square root of 2. Similarly, for other natural numbers like 5, 6, 7, 8, 10, etc., we can write their corresponding square roots as 5, 6, 7, 8, and 10, respectively. The square root that is positive is always represented by this symbol.
Radicand: The number that appears beneath the root is referred to as the radicand, not the square root symbol.
Learn more about root here:
https://brainly.com/question/15649347
#SPJ4
consider two cars moving along the same straight road in opposite directions. car a has a mass of 500kg500kg and has a constant speed of 20m/s20m/s ; car b has a mass of 800kg800kg and a constant speed of 15m/s15m/s . what can you say about the net forces on the cars?
The net force on both the cars car a and car B will be zero.
According to the first law of motion stated by Newton,
An object would continuously written it's state of motion or rest if the net force on the object is zero. It means that, no matter how many forces are working on the body if they all cancel out each other and the net force becomes zero the body will continue it's same state.
Also according to second law of Newton,
The force is rate of change of momentum with respect to time.
F = ma
Here, both the cars the car A of mass 500 kg and the car B of mass 800 kg are moving with a constant velocity of 20 m/s and 15 m/s respectively.
If the velocity of the car is not changing with time it means that there is no acceleration on the body.
If there is no acceleration on the body, then there is no net force on the body.
So, we can conclude hair that the net force on the cards is zero.
To know more about Newton's laws of motion, visit,
https://brainly.com/question/25842103
#SPJ4
What is The reason at which carbon dating works?
a 5.0- kg box is pulled by a horizontal force f applied to the top of the box. when the box meets a low doorstep, it begins to rotate around it. the box is 60 cm wide and 100 cm high. what minimum magnitude of the force f is needed to cause this movement?
The minimum magnitude of the force f is 21 N needed to cause the movement of a 5 kg box pulled by a horizontal force.
What is force and how is the magnitude of force comes out to be 21 N ?Force is the newtonian quantity which represents the product of mass and acceleration.The mass of the box is given to be 5 kg and the box is 60 cm wide and the height is 100 cm .When the block about to rotate normal shifted to the edge of the cube , mg(w/2) = Fh, F = mgx (w/2)= Fh taking g as 9.8 m/s^2.Substituting the values , F = (5 × 9.8 ( 60/2)) / 70Then the force would be , F = (5 × 9.8 × 30 ) / 70,F = 1470 / 70,F = 21 N.Hence the magnitude of the force comes out to be 21 N.Therefore when a 5 kg box is pulled by a horizontal force f applied to the top of the box, the minimum magnitude of the force f needed is 21N.To know more about force visit:
https://brainly.com/question/13191643
#SPJ4
a longitudinal wave is observed. Exactly 6 crests are observed to move past a given point in 9.1 s. Its wavelength is 2.4 m and its frequency is 0.66 HZ. What is the speed of the wave.
The speed of the longitudinal wave is given or computed as 1.584 or approximately 1.6m/s.
What is a wave?A wave is a propagating dynamic disturbance of one or more variables in physics, mathematics, and related sciences. Periodic waves occur when values oscillate repeatedly about an equilibrium value at a certain frequency.
Longitudinal waves are those in which the medium's vibration is parallel to the wave's travel direction and the medium's displacement is parallel to the wave's propagation direction.
A longitudinal wave is an example of one. P-waves of ultrasonography from earthquakes
Compression, rarefaction, wavelength, amplitude, period, and frequency are all important characteristics of a longitudinal wave.
To estimate the above answer multiply wavelength and frequency to get the speed of a wave.
That is:
2.4 x 0.66
= 1.584
If the frequency is not given, one can divide 6 crests by 9.1 seconds to determine the frequency.
Learn more about longitudinal waves:
https://brainly.com/question/2463407
#SPJ1
two long, straight wires are parallel and 49 cm apart. (a) if each wire carries a current of 74 a in the same direction, what is the magnitude of the magnetic force per meter (in n/m) exerted on each wire?
The magnetic force between the two parallel wires is 2.24 x 10⁻³ N/m.
What is the force between the two parallel wires?
The magnetic force between the two parallel wires is calculated by applying the following kinematic equation as shown below.
F/L = μI₁I₂/2πr
where;
μ is the permeability of free space = 4π x 10⁻⁷ Tm/AI₁ is the current in the first wireI₂ is current in the second wireF/L is force per unit lengthr is the distance between the two wiresThe magnitude of the magnetic force per meter (in n/m) exerted on each wire is calculated as;
the current in the first wire = the current in the second wire = 74 A
Substitute the given parameters and solve for the force per unit length of current between the two parallel wires.
F/L = ( 4π x 10⁻⁷ x 74 x 74)/(2π x 0.49)
F/L = 2.24 x 10⁻³ N/m
Learn more about magnetic force here: https://brainly.com/question/13277365
#SPJ1
fiona is trying to describe the location of some of the brightest set of stars in the northern sky, betelgeuse and rigel, to a friend. what could she have her friend look for to help find the stars?
What Fiona did, so her friend could find the stars was to give her friends knowledge about the contents of the sky, such as the shape of planets and stars. Then when you want to see the stars, you have to stay away from light pollution, so the stars can be seen clearly.
Stars are celestial bodies that emit light caused by nuclear fusion reactions that produce energy that occurs in their cores. It should be noted that 'pseudo stars' are not stars, but planets that reflect light from other stars and appear to glow in the sky like a star. A planet or planetary star is an astronomical body orbiting a star or stellar remnant that is massive enough to have its own gravity.
Learn more about planets in the solar system here :
https://brainly.com/question/9211822
#SPJ4
an automobile with a mass of 1325 kg has 3.02 m between the front and rear axles. its center of gravity is located 1.78 m behind the front axle. the automobile is on level ground. (a) determine the magnitude of the force from the ground on each front wheel (assuming equal forces on the front wheels). 2665.79 correct: your answer is correct. n (b) determine the magnitude of the force from the ground on each rear wheel (assuming equal forces on the rear wheels).
The magnitude of the force from the ground on each front wheel is 2775N.
Let us call the force on the front axle F and the force on the rear axle R.
We know that
⇒ F + R= total weight of vehicle = 1360 * 9.80 = 13328 Newtons
And using torques, you know that force on the front axle * distance to the center of mass = force on the rear axle * distance to the center
of mass
or F *1.78 = R * (3.05 - 1.78)
So
1.4016F = R
Then.
F + 1.4016 F = 13328
F = 5550 N and R = 13328 - 5550 = 7778N
So the force on each front tire is 5550 /2 = 2775N
And the force on each rear tire is 7778 /2 = 3889N
Force is a push or pulls upon an item because of the object's interaction with some other object. Pressure is a power that can exchange the motion of an object. A force can reason an object with mass to alternate its speed, i.e., to boost up. pressure also can be described intuitively as a push or a pull. A force has each significance and course, making it a vector amount.
Learn more about force here:-https://brainly.com/question/12970081
#SPJ4
An aluminum tube of 3-in. Outside diameter is to carry a load P of 10 kips having an eccentricity e = 0. 6 in. Knowing that the stock of tubes available for use are made of aluminum alloy 2014-T6 and have wall thicknesses in increments of 116 in. Up to 12 in. , determine the lightest tube that can be used. Use the interaction method of design with an allowable stress in bending of 25 ksi. (Input the final answer as a fraction. )
The Method of Interaction It's a cooperative method for more effective teamwork.
Explain about the Interaction Method?
A combination of hardware and software components that enables computer users to carry out a single job is known as an interaction technique, user interface technique, or input technique.
Four fundamental interaction tasks exist: position, text, select, and quantify. These can be carried out using a variety of hardware and software tools, each of which has been given a category based on its capabilities and qualities.
An interaction occurs when two or more factors have an impact on one another. If one investigates each of their effects independently, they may not have as strong an impact on a result as they might if they occur simultaneously and interact. Caffeine and painkillers are an example of such interaction.
To learn more about Interaction Method refer to:
https://brainly.com/question/17328181
#SPJ4