U will be marked as Brainliest if u solve ex 1 only ​

U Will Be Marked As Brainliest If U Solve Ex 1 Only

Answers

Answer 1

Answer:

You can look at the charge of the molecule.

mg has a +1 charge so the oxidation numbrr for Mg = +1.

For Fe2O3 the total charge is 0. This means the charges of the Fe and the O needs to be equal. O has an oxidation number of -2. You got O3 so 3 x -2 = -6. You got Fe2 so -6 / 2 = -3. Oxidation number of O = -2 and for Fe = -3.

The if you go to the rightbof the reaction you got 3 MgO. O had an oxidation number of -2. The total charge of the molecule is 0 zero, so Mg should be +2.

Mg on the left of the equation has a oxidation number of +1, and on the right +2. The number changed, so it's a redox reaction.


Related Questions

A sealed balloon occupies a volume of 250 mL at an unknown temperature. When the temperature is altered to 30 C, the balloon's volume becomes 0.5 L. Calculate the initial temperature of the air in the balloon.

Answers

Answer:

Initial temperature, T1 = 15°C

Explanation:

Given the following data;

Initial volume, V1 = 250 mL to Liters = 250/1000 = 0.25 L

Final temperature, T2 = 30°C

Final volume, V2 = 0.5 L

To find the initial temperature T1, we would use Charles' law.

Charles states that when the pressure of an ideal gas is kept constant, the volume of the gas is directly proportional to the absolute temperature of the gas.

Mathematically, Charles is given by;

[tex] \frac {V}{T} = K[/tex]

[tex] \frac{V1}{T1} = \frac{V2}{T2}[/tex]

Making T1 the subject of formula, we have;

[tex] T_{1}= \frac{V_{1}}{V_{2}} * T_{2}[/tex]

Substituting into the formula, we have;

[tex] T_{1}= \frac{0.25}{0.5} * 30[/tex]

[tex] T_{1}= 0.5 * 30 [/tex]

Initial temperature, T1 = 15°C

why are some metals such as copper and aluminium not magnetic​

Answers

Answer:i dont know

Explanation:

I D

K

Can someone help me with this. Thank you

Answers

Answer:

Location x is experiencing daytime because it is facing directly to the sun.

Explanation:

From a background understanding of the solar system, the side of the planet facing the sun will be experiencing daytime while the other side of the planet will be experiencing either partial or total darkness depending on the location.

From the diagram given above, we can see clearly that location x is facing the sun and as such, light rays from the sun lightens the location. When this happens, location x will be experiencing daytime.

In conclusion, location x is experiencing daytime because it is facing directly to the sun.

Explain the relationship between the following terms: eutrophication, nutrients, dissolved oxygen leads, and algae.

Answers

Answer:

Eutrophication is the enrichment of a body of water with excessive nutrients (nitrogen and phosphorus), which causes algal growth and subsequent decline of dissolved oxygen after decomposition.

How much heat is required to convert 50.0 g of
water into steam?

Answers

Answer:

Let's say you're using joules. In that case, you'd need 153.7kJ.

a force is 24N is exerted on 2 carts. Cart A has a mass of 45kg and cart B has a mass of 25kg. Which cart will have the greater acceleration? ​

Answers

Cart b will be longer

Litmus turns
in acidic solutions.
green
yellow
blue
red

Answers

Answer:

red

Explanation:

red shows if solution is acidic

how can a match light without a spark

Answers

Answer:

Use friction

Explanation:

Friction is the force that stops something in motion. It also heats up something, creating a gravitational heat! A match striked against the lighter will create a flame, because of friction :)

Using friction would. Newton’s law applies here and many other situations

● Human blood has a hydrogen ion concentration is 10-7.4 mol/L. What is the pH of the blood?

Answers

Explanation:

PH=14-POH

=14-2.6

=11.4

The correct pH is 7.4 because you take the -log of the H30+ concentration (1.0x10^-7.4) to get 7.4 as your ph.

To find pOH you use the formula
pH+pOH=14

7.4+pOH=14

14-7.4=6.6 as your pOH

Evaluate three communication skills that can assist you in sustaining positive relationships​

Answers

1. Accept and celebrate differences. One of the biggest challenges we experience in relationships is that we are all different. We can perceive the world in many ways. Certainly astumbling block that we come across when we try to build relationships is a desire or an expectation that people will think like we do and, in this way, it is so much easier to create a rapport. We feel more comfortable when we feel that people “get” us and can see our point of view. Life, however, would be very dull if we were all the same and, while we may find it initially easier, the novelty of sameness soon would wear off. So accepting and celebrating that we are all different is a great starting point.

2. Listen effectively. Listening is a crucial skill in boosting another person’s self-esteem, the silent form of flattery that makes people feel supported and valued. Listening and understanding what others communicate to us is the most important part of successful interaction and vice versa.

Active or reflective listening is the single most useful and important listening skill. In active listening, we also are genuinely interested in understanding what the other person is thinking, feeling, wanting, or what the message means, and we are active in checking out our understanding before we respond with our own new message. We restate or paraphrase our understanding of their message and reflect it back to the sender for verification. This verification or feedback process is what distinguishes active listening and makes it effective.

3. Give people your time. Giving time to people is also a huge gift. In a world where time is of the essence and we are trying to fit in more than one lifetime, we don’t always have the time to give to our loved ones, friends, and work colleagues. Technology has somewhat eroded our ability to build real rapport and we attempt to multi-task by texting and talking at the same time.

Being present in the time you give to people is also important, so that, when you are with someone, you are truly with someone and not dwelling in the past or worrying about the future. The connection we make with other people is the verytouchstone of our existence, and devoting time, energy, and effort to developing and building relationships is one of the most valuable life skills.

How many milliliters of 3.0 M H2SO4 are needed to make 450 mL of 0.10 M H2SO4?

Answers

97.2223 ) check the comments

Select the correct answer. Which of the below is an example of mimicry that enables prey species avoid predation

Answers

What are the answers? I assume you meant to attach a photo.

Answer:

Thus, the one that is an example of mimicry that enables prey species to avoid predation is a harmless organism imitating the look of a harmful one (option B).

Explanation:

Consider the titration of 82.0 mL of 0.140 M Ba(OH)2 by 0.560 M HCl. Calculate the pH of the resulting solution after the following volumes of HCl have been added. (a) 0.0 mL WebAssign will check your answer for the correct number of significant figures. 13.447 Correct: Your answer is correct. (b) 15.0 mL WebAssign will check your answer for the correct number of significant figures. 12.25 Incorrect: Your answer is incorrect.

Answers

Answer:

a) pH = 13.447

b) pH = 13.176

Explanation:

Ba (OH)₂ is a strong base and ionizes completely in solution to give barium amend hydroxide ions.

The equation of the dissociation of Ba(OH)₂ is given below:

Ba(OH)₂ ----> Ba2+ + 2OH-

1 mole of Ba(OH)₂ produces 2 Moles of OH- ions

a) Before the addition of HCl, i.e.,when 0.00 mL of HCl has been added;

Concentration of hydroxide ions, [OH-] = 0.140 x 2 = 0.a) [OH-] = 0.100 x 2 = 0.280

pOH = -log [OH-]

pOH = -log (0.280)

pOH = 0.553

pH = 14 - 0.553= 13.447

b) pH when 15.0 mL HCl has been added

Moles Ba(OH)₂ = concentration × volume

Volume of Ba(OH)₂ = 82.0 mL = 0.082 L, concentration = 0.140 M

moles of Ba(OH)₂ = 0.082 x 0.140 = 0.01148 moles

moles OH- produced by 0.01148 moles of Ba(OH)₂ = 2 x 0.01148= 0.02296

moles HCl = 0.0150 L x 0.560 = 0.0084

moles of H+ produced by 0.0084 HCl = 0.0084

0.0084 H+ willnreact with 0.0084 moles of OH-

moles OH- left after the reaction = 0.02296 - 0.0084 = 0.01456 moles

total volume of new solution = (82 +15) mL = 97 mL => 0.097 L

Concentration of OH- ions = moles / volume

[OH-] = 0.01456 / 0.097 = 0.1501

pOH = -log [OH-]

pOH = -log (0.150)

pOH = 0.824

pH = 14 - 0.824

pH = 13.176

Determine the mass of ammonium chloride, NH4CI, required to prepare 0.250 L of a 0.35 M solution of ammonium chloride.

Answers

A 0.250 L solution of NH4Cl contains (0.250 L)(0.35 mol/L) = 0.0875 moles of dissolved NH4Cl. Converting this quantity to mass, we get (0.0875 mol NH4Cl)(53.491 g/mol) = 4.7 g NH4Cl (two significant figures).

So, approximately 4.7 g of NH4Cl dissolved in a 0.250 L solution will have a concentration of 0.35 L.

I need the 3 questions !!! About Rubidium (Rb)

ASAP PLEASE DUE IN LIKE 20 min

Answers

Answer:

419kJ/mol  5,0,0,+12That catches fire spontaneously

Explanation:

1. Topic: Chemistry

ElementFirst Ionization Energy (kJ/mol) Lithium520Sodium496Rubidium403Cesium376According to the above table, which is most likely to be the first ionization energy for potassium?  

536kJ/mol  504kJ/mol  419kJ/mol  391kJ/mol  358kJ/mol

2. Topic: Chemistry, Atom

The correct set of four quantum numbers for the valence electrons of the rubidium atom   (Z=37)  is:  

5,1,1,+12  5,0,1,+12  5,0,0,+12 5,1,0,+12

3. Rubidium and cesium are pyrophoric. Here the term pyrophoric means:

That hardly catches fireThat does not catch fire at all That catches fire spontaneously None of these

A woman weighing 600 N is leaning on the ground with shoe soles with a total area of ​​0.04 m2. Calculate the pressure of the motors

Answers

Answer:

1.5×10^4

Explanation:

Pressure= force/area

P= 600/0.04

P= 15000

P= 1.5×10^4

I need help with this :/

Answers

Answer:

Blank 1: 1

Blank 2: 2

Blank 3: 1

Blank 4: 1

Explanation:

Assuming this is to balance the equation, write out the amount of each element you have on the reactants side and on the products side

Reactants                                                   Products

Ca 1                                                             Ca 1

C 2                                                              C 2

H 2                                                              H 4

O 1                                                               O 2

Comparing the two, we can see that hydrogen and oxygen have different amounts between reactants and products. Therefore, we need to multiply by some number to get the two equal. If we multiply the reactants by 2 we will get the correct amount in the products. So we put a 2 in front of the H₂O to signify this.

The balanced chemical reaction is

CaC₂ + 2 H₂O --> C₂H₂ + Ca(OH)₂

what do solar power produced

Answers

Answer:

Solar technologies convert sunlight into electrical energy either through photovoltaic (PV) panels or through mirrors that concentrate solar radiation. This energy can be used to generate electricity or be stored in batteries or thermal storage.

Explanation:

what is the relationship between heat and temperature?

Answers

*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆

Answer: according to ck12.org "Heat is the sum of all the kinetic energies of all the molecules of an object, while temperature is the average kinetic energy of the molecules of an object."

Explanation:

I hope this helped!

<!> Brainliest is appreciated! <!>

- Zack Slocum

*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆

Which of the following best defines a spectrum?
A. The range of values of some property
B. The measurement of some property
C. A single value of some property
D. The change over time in the value of some property
SUBMIT

Answers

Answer:

The range of values of some property

Explanation:

A.pex, and the comments on the other answer

The best defines a spectrum is The range of values of some.

What is spectrum ?

A spectrum (plural spectra or spectrums) is a condition that is not limited to a specific set of values but can vary, without gaps, across a continuum. The word was first used scientifically in optics to describe the rainbow of colors in visible light after passing through a prism. As scientific understanding of light advanced, it came to apply to the entire electromagnetic spectrum. It thereby became a mapping of a range of magnitudes (wavelengths) to a range of qualities, which are the perceived "colors of the rainbow" and other properties which correspond to wavelengths that lie outside of the visible light spectrum.

Spectrum has since been applied by analogy to topics outside optics. Thus, one might talk about the "spectrum of political opinion", or the "spectrum of activity" of a drug, or the "autism spectrum". In these uses, values within a spectrum may not be associated with precisely quantifiable numbers or definitions. Such uses imply a broad range of conditions or behaviors grouped together and studied under a single title for ease of discussion. Nonscientific uses of the term spectrum are sometimes misleading. For instance, a single left–right spectrum of political opinion does not capture the full range of people's political beliefs. Political scientists use a variety of biaxial and multiaxial systems to more accurately characterize political opinion.

Learn more about spectrum

https://brainly.com/question/23118593

#SPJ2

Consider the reaction.

HCl(aq) + KOH(aq) ⟶ KCl(aq) + H2O(l)
In the reaction shown, HCl is

Answers

Answer:

the acid used to neutralize the base in oder to form a salt and water

As you move from left to right within a period (row), what is the pattern?

Answers

From left the right

a repelling force occurs between two charged objects when the charges are​

Answers

Answer:

Like signs.

Explanation:

When two charges are like signs, a repelling force will occur.

Explain why only one type of seismic wave was recorded at location B. (1 sentence only!)

Answers

Answer:

p wave

Explanation:

The P wave is designated the primary preliminary wave because it is the first to arrive at a seismic station after an earthquake. It travels at a speed usually less than 6 kilometers per second in the Earth's crust and jumps to 13 kilometers per second through the core.

How many joules of heat are needed to raise the temperature of 15g of aluminum from 28C to 99C if the specific heat of aluminum is .90 j/gC?

Answers

Answer:

In order to increase the temperature of 1 g of aluminium by 1∘C , you need to provide it with 0.90 J of heat

Explanation:

The magnetic field is stronger away from the magnet true or false​

Answers

Answer:

Big False

Explanation:

As the magnets get closer, the stronger the magnetic field. The farther away, the less strength the field exhibits.

If a compound contains a poly atomic ion then what type of compound is it A. Convalent Compound B. Ionic Compound

Answers

Answer:

B. Ionic Compound

Explanation:

An ionic compound is that compound which contains a positively charged ion called CATION and a negatively charged ion called ANION. The cation loses or transfers electrons to the anion, hence, making the former (cation) positive and the latter (anion) negative.

A polyatomic ion is an ion that contains more than one type of atom e.g OH-, NO3²-, CO3²- etc. A polyatomic ion usually has an overall charge formed from the charges of the individual atoms that makes it up. For example, in OH-, the overall charge is -1.

Since a polyatomic ion can have an overall positive or negative charge, it must enter a reaction with another ion that complements it i.e. a negative polyatomic ion will react with a positive ion to neutralize its charge. Hence, this forms an IONIC COMPOUND. This is why most compounds with polyatomic ions are IONIC COMPOUNDS.

For example, CaCO3 is an ionic compound formed when Ca²+ (cation) reacts with the polyatomic anion: CO3²-

Please help. Which of these are chemical or physical change?

Answers

Answer:

Explanation:

a is a physical change you could put the peices back together

b is a chemical change because you cant unburn wood  

c is a chemical change because you cant unbake it

d is a physicl change you could te your time and unmix it

Which of the following statements best defines the theoretical yield of a reaction?

a) The ratio of measured yield over actual yield

b) The amount of product measured after a reaction

c) The ratio of measured yield over stoichiometric yield

d)The maximum amount of product that can be obtained

Answers

The statement which best defines the theoretical yield of a reaction is the maximum amount of product that can be obtained.

What is yield of any reaction?

Yield of any chemical reaction gives idea about the amount of product that will be produced by the chemical reaction between reactants.

Theoretical yield gives idea about the how much maximum yield of any product will be produced in the given chemical reaction by using the stoichiometry of the reaction.

Hence theoretical yield is the maximum amount of product that can be obtained.

To know more about theoretical yield, visit the below link:
https://brainly.com/question/25996347

#SPJ2

_______ in saliva start the chemical digestion process​

Answers

Answer:

amylase

Explanation:

Other Questions
PLZZZZ HELPPPPPP MEEEEEE!!!!!! ASAP!!! ILL GIVE 20 POINTS AND BRAINLIEST!!!:'( I am soooooooooooo desperate. A "GIVE and GO" play is done between 2 teammates in basketball?A. TrueB. False If 4x-8y=5 is a true equation what would be the value of 3(4x-8y) A cricket ball is hit by a person what are the action taken in this movement The following stockholders' equity accounts arranged alphabetically are in the ledger of Wildhorse Co. at December 31, 2020. Common Stock ($12 stated value) $1,776,000 Paid-in Capital from Treasury Stock 6,700 Paid-in Capital in Excess of Par-Preferred Stock 48,700 Paid-in Capital in Excess of Stated Value-Common Stock 659,000 Preferred Stock (8%, $101 par, noncumulative) 414,100 Retained Earnings 782,000 Treasury Stock-Common (7,900 shares) 102,700 Required:Prepare a stockholders' equity section at December 31, 2020. The following information relates to the manufacturing operations of the Abbra Publishing Company for the year: Beginning Ending Raw materials inventory$547,000 $610,000 The raw materials used in manufacturing during the year totaled $1,018,000. Raw materials purchased during the year amount to: Multiple Choice $955,000. $892,000. $1,565,000. $408,000. In a single carbon bond, two carbon atoms sharepair of electrons. Use the following equation:(x + 4) + (y + 6) = 9What is the x and y value of the center of the circle? How do you turn 3/4 into a decimal? Help me please I dont know this stuff Find the value of a in the diagram below:2040200 What is the only way that a Supreme Court decision can be changed? Can someone help me plss What is the first step in solving the following system of equations?3 x + y = 23. 8 x + 2 y = 23.Substitute the value of y from one equation into the other equation.Solve the first equation for y.Subtract the second equation from the first equation.Substitute the value of x from one equation into the other equati Which was an effect of the Ottomans increasing control of trade between Europe and Asia? Which two skills would most benefit a technical writer?1. Precision 2. Rigidness 3. Indifference 4. Curiosity 5. Inaccuracy Lithium nitride LiN LiN3 Li3N SummaryIn this lab, you use what you have learned about searching an array to find an exact match to complete a partially prewritten C++ program. The program uses an array that contains valid names for 10 cities in Michigan. You ask the user to enter a city name; your program then searches the array for that city name. If it is not found, the program should print a message that informs the user the city name is not found in the list of valid cities in Michigan.The file provided for this lab includes the input statements and the necessary variable declarations. You need to use a loop to examine all the items in the array and test for a match. You also need to set a flag if there is a match and then test the flag variable to determine if you should print the the Not a city in Michigan.message. Comments in the code tell you where to write your statements. You can use the previous Mail Order program as a guide.InstructionsEnsure the provided code file named MichiganCities.cppis open.Study the prewritten code to make sure you understand it.Write a loop statement that examines the names of cities stored in the array.Write code that tests for a match.Write code that, when appropriate, prints the message Not a city in Michigan..Execute the program by clicking the Run button at the bottom of the screen. Use the following as input:ChicagoBrooklynWatervlietAcme// MichiganCities.cpp - This program prints a message for invalid cities in Michigan. // Input: Interactive// Output: Error message or nothing#include #include using namespace std;int main(){// Declare variablesstring inCity; // name of city to look up in arrayconst int NUM_CITIES = 10;// Initialized array of citiesstring citiesInMichigan[] = {"Acme", "Albion", "Detroit", "Watervliet", "Coloma", "Saginaw", "Richland", "Glenn", "Midland", "Brooklyn"};bool foundIt = false; // Flag variableint x; // Loop control variable// Get user inputcout > inCity;// Write your loop here // Write your test statement here to see if there is// a match. Set the flag to true if city is found. // Test to see if city was not found to determine if// "Not a city in Michigan" message should be printed. return 0;} // End of main() Why do forensic technicians typically collect blood evidence before picking up weapons and other evidence? Because the Federal Rules of Evidence require that evidence is collected and processed in a certain order. Because blood evidence is affected by environmental conditions. Because blood is messy and it is easier to work with the rest of the evidence once that is cleaned up. Because it is a habit. 18.- What is the opposite of "Viejo"?a).- simpticob).- artsticoC- jovennone of the above