Use 1-Butanol as the only organic compound, design a method to synthesize 5-Nonanone. You may use any other inorganic reagents. Any organic reagents have to be made from 1-butanol.

Answer:

1. 6.92 g of H2O

2i. - 46 KJ of energy.

ii. Option A. Evolved.

Explanation:

1. Determination of the mass of H2O that would be made to react if 110 kJ of energy were provided.

This can be obtained as follow:

The equation for the reaction is given below

2H2O(l) —> 2H2(g) + O2(g) H = 572 kJ

Next, we shall determine the mass of H2O required to produce 572 kJ from the balanced equation.

Molar mass of H2O = (2x1) + 16 = 18 g/mol

Mass of H2O from the balanced equation = 2 x 18 = 36 g

From the balanced equation above, 36 g of H2O reacted to produce 572 kJ of energy.

Finally, we shall determine the mass of water (H2O) needed to produce 110 kJ of energy.

This is illustrated below:

From the balanced equation above, 36 g of H2O reacted to produce 572 kJ of energy.

Therefore, Xg of H2O will react to 110 kJ of energy i.e

Xg of H2O = (36 x 110)/572

Xg of H2O = 6.92 g

Therefore, 6.92 g of H2O is needed to react in order to produce 110 KJ of energy.

2i. Determination of the energy.

The balanced equation for the reaction is given below:

CO(g) + 3H2(g) —> CH4(g) + H2O(g) H = -206 kJ

Next, we shall determine the mass of CO that reacted to produce -206 kJ of energy from the balanced equation.

This is illustrated below:

Molar mass of CO = 12 + 16 = 28 g/mol

Mass of CO from the balanced equation = 1 x 28 = 28 g

From the balanced equation above,

28 g of CO reacted to produce -206 kJ of energy.

Finally, we shall determine the amount of energy produced by reacting 6.27 g of CO. This is illustrated below:

From the balanced equation above,

28 g of CO reacted to produce -206 kJ of energy.

Therefore, 6.27 g of CO will react to produce = (6.27 x -206)/28 = - 46 KJ of energy.

Therefore, - 46 KJ of energy were produced from the reaction.

2ii. Since the energy obtained is negative, it means heat has been given off to the surroundings.

Therefore, the heat is evolved.

Answer:

a hypothetical gas whose molecules occupy negligible space and have no interactions, and which consequently obeys the gas laws exactly.

Answer:

The answer to your question is given below.

Explanation:

Aluminium has atomic number of 13. Thus, the electronic configuration of aluminium can be written as:

Al (13) —› 1s² 2s²2p⁶ 3s²3p¹

The orbital diagram is shown on the attached photo.

Answer: screen shot

Explanation:

Answer:

I think the answer is " Night vision glasses detect Infrared" energy emitted from cooling objects.

Explanation:

When a solution is diluted with water, the ratio of the initial to final volumes of solution is equal to the ratio of final to initial molarities. The statement is True.

Concentration refers to the amount of a substance in a defined space. Another definition is that concentration is the ratio of solute in a solution to either solvent or total solution.

There are various methods of expressing the concentration of a solution.

Concentrations are usually expressed in terms of molarity, defined as the number of moles of solute in 1 L of solution.

Solutions of known concentration can be prepared either by dissolving a known mass of solute in a solvent and diluting to a desired final volume or by diluting the appropriate volume of a more concentrated solution (a stock solution) to the desired final volume.

Learn more about Concentrations, here:

https://brainly.com/question/10725862

#SPJ3

The name of the molecule which is given below is 2-pentene.

Alkenes are the organic compounds which are composed of carbon and hydrogen atoms, in which double bond is present.

In the given diagram:

So the compound is 2 pentene.

Hence, 2 pentene is the name of the compound.

To know more about alkene, visit the below link:
https://brainly.com/question/6041165

#SPJ2

Answer:

(d) 2

Explanation:

Lets say that there are 2 apples or 1+1 if you count them you would do 1,2 so 2 would be the final answer

Answer:

Approximately [tex]10.88[/tex].

Explanation:

[tex]\rm OBr^{-}[/tex] can act as a weak Bronsted-Lowry base:

[tex]\rm OBr^{-}\; (aq) + H_2O\; (l) \rightleftharpoons HOBr\; (l) + OH^{-}\; (aq)[/tex].

(Side note: the state symbol of [tex]\rm HOBr[/tex] in this equation is [tex]\rm (l)[/tex] (meaning liquid) because [tex]\rm HOBr[/tex] is a weak acid.)

However, the equilibrium constant of this reaction, [tex]K_\text{eq}[/tex], isn't directly given. The idea is to find [tex]K_\text{eq}[/tex] using the [tex]\rm pH[/tex] value at the half-equivalence point. Keep in mind that this system is at equilibrium all the time during the titration. If temperature stays the same, then the same [tex]K_\text{eq}[/tex] value could also be used to find the [tex]\rm pH[/tex] of the solution before the acid was added.

At equilibrium:

[tex]\displaystyle K_\text{eq} = \frac{[\rm HOBr\; (l)]\cdot [\rm OH^{-}\; (aq)]}{[\rm OBr^{-}\; (aq)]}[/tex].

At the half-equivalence point of this titration, exactly half of the base, [tex]\rm OBr^{-}[/tex], has been converted to its conjugate acid, [tex]\rm HOBr[/tex]. Therefore, the half-equivalence concentration of [tex]\rm OBr^{-}[/tex] and [tex]\rm HOBr[/tex] should both be equal to one-half the initial concentration of [tex]\rm OBr^{-}[/tex].

As a result, the half-equivalence concentration of [tex]\rm OBr^{-}[/tex] and [tex]\rm HOBr[/tex] should be the same. The expression for [tex]K_\text{eq}[/tex] can thus be simplified:

[tex]\begin{aligned}& K_\text{eq} \\&= \frac{\left(\text{half-equivalence $[\rm HOBr\; (l)]$}\right)\cdot \left(\text{half-equivalence $[\rm OH^{-}\; (aq)]$}\right)}{\text{half-equivalence $[\rm OBr^{-}\; (l)]$}}\\ &=\text{half-equivalence $[\rm OH^{-}\; (aq)]$}\end{aligned}[/tex].

In other words, the [tex]K_\text{eq}[/tex] of this system is equal to the [tex]\rm OH^{-}[/tex] concentration at the half-equivalence point. Assume that [tex]\rm p\mathnormal{K}_\text{w}[/tex] the self-ionization constant of water, is [tex]14[/tex]. The concentration of [tex]\rm OH^{-}[/tex] can be found from the [tex]\rm pH[/tex] value:

[tex]\begin{aligned}& \text{half-equivalence $[\rm OH^{-}\; (aq)]$} \\ &= 10^{\rm pH - p\mathnormal{K}_\text{w}}\;\rm mol \cdot L^{-1} \\ &= 10^{7.75 - 14}\; \rm mol \cdot L^{-1}\\ &= 10^{-6.25}\; \rm mol \cdot L^{-1}\end{aligned}[/tex].

Therefore, [tex]\begin{aligned} K_\text{eq} &= 10^{-6.25}\end{aligned}[/tex].

Again, since [tex]\rm KOBr[/tex] is a soluble salt, all that [tex]0.200\; \rm M[/tex] of [tex]\rm KOBr[/tex] in this solution will be in the form of [tex]\rm K^{+}[/tex] and [tex]\rm OBr^{-}[/tex] ions. Before any hydrolysis takes place, the concentration of [tex]\rm OBr^{-}[/tex] should be equal to that of [tex]\rm KOBr[/tex]. Therefore:

[tex]\text{$[\rm OBr^{-}\; (aq)]$ before hydrolysis} = 0.200\; \rm M[/tex].

Let the equilibrium concentration of [tex][\rm OH^{-}\; (aq)][/tex] be [tex]x\; \rm M[/tex]. Create a RICE table for this reversible reaction:

[tex]\begin{array}{c|ccccccc} & \rm OBr^{-}\; (aq) &+&\rm H_2O\; (l)& \rightleftharpoons & \rm HOBr\; (l)& + & \rm OH^{-}\; (aq) \\ \textbf{I}& 0.200\; \rm M & & & & 0 \; \rm M & & 0\; \rm M \\ \textbf{C} & -x\; \rm M & & & & +x \; \rm M & & +x\; \rm M \\ \textbf{E}& (0.200 + x)\; \rm M & & & & x \; \rm M & & x\; \rm M \end{array}[/tex].

Assume that external factors (such as temperature) stays the same. The [tex]K_\text{eq}[/tex] found at the half-equivalence point should apply here, as well.

[tex]\displaystyle K_\text{eq} = \frac{[\rm HOBr\; (l)]\cdot [\rm OH^{-}\; (aq)]}{[\rm OBr^{-}\; (aq)]}[/tex].

At equilibrium:

[tex]\displaystyle \frac{[\rm HOBr\; (l)]\cdot [\rm OH^{-}\; (aq)]}{[\rm OBr^{-}\; (aq)]} = \frac{x^2}{0.200 + x}[/tex].

Assume that [tex]x[/tex] is much smaller than [tex]0.200[/tex], such that the denominator is approximately the same as [tex]0.200[/tex]:

[tex]\displaystyle \frac{[\rm HOBr\; (l)]\cdot [\rm OH^{-}\; (aq)]}{[\rm OBr^{-}\; (aq)]} = \frac{x^2}{0.200 + x} \approx \frac{x^2}{0.200}[/tex].

That should be equal to the equilibrium constant, [tex]K_\text{eq}[/tex]. In other words:

[tex]\displaystyle \frac{x^2}{0.200} \approx K_\text{eq} = 10^{-6.25}[/tex].

Solve for [tex]x[/tex]:

[tex]x \approx 3.35\times 10^{-4}[/tex].

In other words, the [tex]\rm OH^{-}[/tex] before acid was added was approximately [tex]3.35\times 10^{-4}\; \rm M[/tex], which is the same as [tex]3.35\times 10^{-4}\; \rm mol \cdot L^{-1}[/tex]. Again, assume that [tex]\rm p\mathnormal{K}_\text{w} = 14[/tex]. Calculate the [tex]\rm pH[/tex] of that solution:

[tex]\begin{aligned}\rm pH &= \rm p\mathnormal{K}_\text{w} + \log [\mathrm{OH^{-}}] \approx 10.88\end{aligned}[/tex].

(Rounded to two decimal places.)

Answer:

(B)

Explanation:

edg 2020

The four seasons in earth is originating from the earth's revolution around the sun. Therefore, the most suitable model for Amanda is  Four earth models, each with a different tilt to represent the earth’s position relative to the sun, lined up in order of season.

Seasons in earth is originating from the difference in the distance from the sun over each time period. Hence, revolution of earth around sun make these seasons.

The time period at which earth comes closer to sun more hot will be earth's surface and we experience summer season. When we far from sun winter season occurs.

Therefore, different season are coming based on the distance of earth from sun at each revolution point. This is also affected by the tilt of earth's in its own axis.

Hence, different earth models with different distance from sun is most suitable model here for Amanda. Thus option B is correct.

To find more about seasons, refer the link below:

https://brainly.com/question/4410000

#SPJ2

Answer:

Pb(NO3)2(aq) + 2KCl(aq) ------> 2KNO3(aq) + PbCl2(s)

3.52 g of PbCl2

3.76 g of KCl

Explanation:

The equation of the reaction is;

Pb(NO3)2(aq) + 2KCl(aq) ------> 2KNO3(aq) + PbCl2(s)

Number of moles of Pb(NO3)2 =mass/molar mass 5.06g/331.2 g/mol = 0.0153 moles

Number of moles of KCl= mass/ molar mass= 6.03g/74.5513 g/mol= 0.081 moles

Next we obtain the limiting reactant; the limiting reactant yields the least number of moles of products.

For Pb(NO3)2;

1 mole of Pb(NO3)2 yields 1 mole of PbCl2

Therefore 0.0153 moles of Pb(NO3)2 yields 0.0153 moles of PbCl2

For KCl;

2 moles of KCl yields 1 mole of PbCl2

0.081 moles of KCl yields 0.081 moles ×1/2 = 0.041 moles of PbCl2

Therefore Pb(NO3)2 is the limiting reactant.

Theoretical Mass of precipitate obtained = 0.0153 moles of PbCl2 × 278.1 g/mol = 4.25 g of PbCl2

% yield = actual yield/theoretical yield ×100

Actual yield = % yield × theoretical yield /100

Actual yield= 82.9 ×4.25/100

Actual yield = 3.52 g of PbCl2

If 1 mole of Pb(NO3) reacts with 2 moles of KCl

0.0153 moles of Pb(NO3)2 reacts with 0.0153 moles × 2 = 0.0306 moles of KCl

Amount of excess KCl= 0.081 moles - 0.0306 moles = 0.0504 moles of KCl

Mass of excess KCl = 0.0504 moles of KCl × 74.5513 g/mol = 3.76 g of KCl

Answer:

Catalyst

Explanation:

For the reaction:

[tex]Cl_2_(_g_)~+~3F_2_(_g_)->2ClF_3_(_g_)[/tex]

We have a main observation: When platinum is added the reaction goes faster. With this in mind, we have to remember the kinetic equilibrium theory. In figure 1, we have an energy diagram. In which we have an specific energy for the reagents and the products. When the reaction takes place, the reaction has to must go through an energy peak. This energy peak is called "activation energy". When platinum is added the activation energy decreases and the reaction can go faster. Therefore, platinum is a "catalyst", a substance with the ability to reduce the activation energy.

I hope it helps!

Answer:

b. Al3+ + 3Br– → Al + (3/2)Br2

Explanation:

If we look at this reaction closely, aluminum was reduced while bromine was oxidized. The reduction potential of aluminum is -1.66 V while that of bromine is + 1.087. Recall that the more negative the redox potential of a chemical specie, the greater its tendency to function as a reducing agent donating electrons in an electrochemical reaction.

However, in this reaction, aluminium is found to accept rather than donate electrons. Therefore, the process is non spontaneous and can only occur in an electrolytic cell, hence the answer.

b. [tex]Al^{3+} + 3 Br^{-}[/tex] → [tex]Al + \frac{3}{2} Br_{2}[/tex]

Electrolytic  Cell v/s Electrochemical Cell:

Out of the given reactions, [tex]Al^{3+} + 3 Br^{-}[/tex] → [tex]Al + \frac{3}{2} Br_{2}[/tex]  is carried out in an electrolytic cell rather than in an electrochemical cell.

As we know, In electrolytic cells, like galvanic cells, are composed of two half-cells

In the given reaction, aluminum is being reduced while bromine gets oxidized and the value of reduction potential of aluminum is -1.66 V while that of bromine is + 1.087. Therefore, the process is non spontaneous and can only occur in an electrolytic cell.

Learn more:

https://brainly.com/question/21722989

Answer:

1120.62 kJ

Explanation:

In order to find how much heat is released for 7.70 mol, we have to compare it with the heat released from one mole.

So from the question, we have;

196.6 kJ = 1 mol

x = 5.70

x = 5.70 * 196.6 / 1

x = 1120.62 kJ

Answer: 9.08 L

Explanation:

To calculate the moles :

[tex]\text{Moles of solute}=\frac{\text{given mass}}\times{\text{Molar Mass}}[/tex]    

[tex]\text{Moles of} Al=\frac{14.6g}{27g/mol}=0.54moles[/tex]

[tex]4Al+3O_2\rightarrow 2Al_2O_3[/tex]

According to stoichiometry :

4 moles of [tex]Al[/tex] require  = 3 moles of [tex]O_2[/tex]

Thus 0.54 moles of [tex]Al[/tex] will require=[tex]\frac{3}{4}\times 0.54=0.405moles[/tex]  of [tex]O_2[/tex]

Standard condition of temperature (STP)  is 273 K and atmospheric pressure is 1 atm respectively.

According to the ideal gas equation:

[tex]PV=nRT[/tex]

P = Pressure of the gas = 1 atm

V= Volume of the gas = ?

T= Temperature of the gas = 273 K      

R= Gas constant = 0.0821 atmL/K mol

n=  moles of gas= 0.405

[tex]V=\frac{nRT}{P}=\frac{0.405\times 0.0821\times 273}{1}=9.08L[/tex]

Thus 9.08 L of [tex]O_2[/tex] at STP would be required

Considering the reaction stoichiometry and STP conditions, 9.072 L of O₂ at STP would be required.  

The balanced reaction is:

4 Al + 3 O₂ → 2 Al₂O₃

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

Being 27 g/mole the molar mass of Al, this is the amount of mass that a substance contains in one mole, then if 14.6 grams Al are reacted,   the number of moles of Al that react is calculated as:

[tex]14.6 gramsx\frac{1 mole}{27 grams}= 0.54 moles[/tex]

Then you can apply the following rule of three: if by stoichiometry 4 moles of Al react with 3 moles of O₂, 0.54 moles of Al react with how many moles of O₂?

[tex]amount of moles of O_{2} =\frac{0.54 moles of Alx3 moles of O_{2} }{4 moles of Al}[/tex]

amount of moles of O₂= 0.405 moles

On the other side, the STP conditions refer to the standard temperature and pressure. Pressure values at 1 atmosphere and temperature at 0 ° C are used and are reference values for gases. And in these conditions 1 mole of any gas occupies an approximate volume of 22.4 liters.

Then you can apply the following rule of three: if by definition of STP 1 mole of O₂ occupies 22.4 L, 0.405 moles of O₂, how much volume does it occupy?

[tex]volume=\frac{0.405 moles of O_{2}x22.4 L }{1 mole of O_{2} }[/tex]

volume= 9.072 L

Finally, 9.072 L of O₂ at STP would be required.  

Learn more:

Answer:

11445.8years

Explanation:

Half-life of carbon-14 = 5720 years

First we have to calculate the rate constant, we use the formula :

Answer:

5.643 kJ

Explanation:

The quantity of heat released or absorbed by a substance (Q) is given by the equation:

Q = mcΔT

Where m is the mass of the substance, c is the specific heat of substance and ΔT is the difference between the final temperature and the initial temperature.

Given that:

m = 45 g, Final temperature = 48°C, Initial temperature = 18°C, c = specific heat of water = 4.18 J/g°C

ΔT = Final temperature - Initial temperature = 48°C - 18°C = 30°C

The quantity of heat is:

Q = mcΔT = 45 g × 4.18 J/g°C × 30°C = 5643 J

Q = 5.643 kJ

Answer:

F, V, V , V, F

Explanation:

1 - "Os foguetes são utilizados para levar pessoas ao espaço (os astronautas), mas principalmente cargas como, por exemplo, os satélites artificiais, os telescópios espaciais, levar sondas a outros planetas etc".

2 - Tipo Meteorologia: utilizados para monitorar o tempo e o clima no planeta Terra, por exemplo, os da série Meteosat.

3 - ...

4 - ...

5 - Usam combustivel solido, liquido, hibridos (solido e liquido), iônica:

Solido:

 São sistemas simples que unem os dois propelentes envolvidos em uma massa sólida que, quando inflamada, não para de queimar até o esgotamento completo.

Liquido:

 São muito mais complexos e envolvem o bombeamento de quantidades imensas de propelentes para as câmaras de combustão dos motores.

Hibridos:

 O propelente sólido – normalmente o combustível – é distribuído ao longo do tanque de maneira homogênea. O propelente líquido ou gasoso "normalmente o oxidante" fica armazenado em tanques.

 Podem ser desligados depois de sofrerem ignição, além de permitirem um controle de queima relativamente preciso.

Iônica:

 Usando eletricidade (captada por painéis solares ou gerada por reatores atômicos) para ionizar átomos (normalmente gases nobres, como xenônio), e expulsá-los em velocidades altíssimas.

Answer:

Based on the Modern Periodic table, there is an increase in the electropositivity of the atom down the group as well as increases across a period. On comparing the electropositivities of the mentioned oxides central atom, it is seen that Ca is most electropositive followed by Al, Si, C, P, and S is the least electropositive.  

With the decrease in the electropositivity, there is an increase in the acidity of the oxides. Thus, the increasing order of the oxides from the least acidic to the most acidic is:  

CaO > Al2O3 > SiO2 > CO2 > P2O5 > SO3. Hence, CaO is the least acidic and SO3 is the most acidic.  

Since acidity increases across a period from left to right, and decreases down a group, the oxides can be ranked from the least acidic to the most acidic as follows:

[tex]\mathbf{CaO < Al_2O_3 < SiO_2 < CO_2 < P_2O_5 <SO_3}[/tex]

Note the following:

Using the periodic table diagram given in the attachment below, we can rank the given oxides according to their increasing acidity.

Therefore, since acidity increases across a period from left to right, and decreases down a group, the oxides can be ranked from the least acidic to the most acidic as follows:

[tex]\mathbf{CaO < Al_2O_3 < SiO_2 < CO_2 < P_2O_5 <SO_3}[/tex]

Learn more here:

https://brainly.com/question/12200588

Answer:

heptan-2-one

Explanation:

In this case, the final product would be a ketone: heptan-2-one. To understand why this molecule is produced we have to check the reaction mechanism.

The first step is the protonation of the triple bond to produce the more stable carbocation (a secondary one) by the action of sulfuric acid [tex]H_2SO_4[/tex]. The next step is the attack of water to the carbocation to produce a new bond between C and the O, producing a positive charge in the oxygen. Then, a deprotonation step takes place to produce an enol. Finally, we will have a rearrangement (keto-enol tautomerism) to produce the final ketone.

See figure 1

I hope it helps!

Answer:

Explanation:

The given formula is empirical formula

Let the molecular formula of first be

[tex]( CCl )_n[/tex]

molecular weight = n x ( 12 + 35.5 )

= 47.5 n

Given molecular weight = 189.83 so

47.5 n = 189.83

n = 3.99 or 4 approx

Molecular formula =

[tex]( CCl )_4[/tex]

= C₄ Cl₄

Let the molecular formula of second compound  be

[tex]( C_3H_2N)_n[/tex]

molecular weight = n x ( 3 x 12 +2+14 )

= 52 n

Given molecular weight = 156.23  so

52 n = 156.23

n = 3.0044 or 3 approx

Molecular formula =

[tex]( C_3H_2N )_3[/tex]

= C₉H₆ N₃

Answer:

In the other of increasing wavelength we arrange as

X-rays

ultraviolet

green light

red light

infrared

radio waves

Explanation:

In the electromagnetic spectrum, wavelength decreases with increase in the energy of the electromagnetic wave. Since the e-m wave spectrum is arranged in the order of increasing energy (decreasing wavelength) as: Radio wave; infrared; visible light; ultraviolet; x-rays; gamma rays. Within the visible light, the green light has more energy than the red light. Therefore, the arrangement should be in the reverse direction of their increasing energy.

Answer:

Approximately [tex]24\; \rm g[/tex] (at most.)

Explanation:

Aluminum [tex]\rm Al[/tex] reacts with bromine [tex]\rm Br_2[/tex] at a [tex]2:3[/tex] ratio:

[tex]\rm 2\; Al\, (s) + 3\; Br_2\, (g) \to 2\; AlBr_3\, (s)[/tex].

Look up the relative atomic mass of [tex]\rm Al[/tex] and [tex]\rm Br[/tex]. From a modern periodic table:

Calculate the formula mass of the reactants and of the product:

Calculate the quantity (in number of moles of formula units) of each reactant:

Assume that [tex]\rm Al\, (s)[/tex] is the limiting reactant. From the coefficients:

[tex]\displaystyle \frac{n(\mathrm{AlBr_3})}{n(\mathrm{Al})} = 1[/tex].

Based on the assumption that [tex]\rm Al\, (s)[/tex] is the limiting reactant:

[tex]\begin{aligned}n(\mathrm{AlBr_3}) &= \frac{n(\mathrm{AlBr_3})}{n(\mathrm{Al})} \cdot n(\mathrm{Al}) \\ &=1\times 0.18528\; \rm mol \approx 0.185\; \rm mol\end{aligned}[/tex].

In other words, if [tex]\rm Al[/tex] is the limiting reactant (meaning that [tex]\rm Br_2[/tex] is in excess,) then approximately [tex]0.556\; \rm mol[/tex] of [tex]\rm AlBr_3[/tex] will be produced.

On the other hand, assume that [tex]\rm Br_2\; (g)[/tex] is the limiting reactant. Similarly, from the coefficients:

[tex]\displaystyle \frac{n(\mathrm{AlBr_3})}{n(\mathrm{Br_2})} = \frac{2}{3}[/tex].

Based on the assumption that [tex]\rm Br_2\, (g)[/tex] is the limiting reactant:

[tex]\begin{aligned}n(\mathrm{AlBr_3}) &= \frac{n(\mathrm{AlBr_3})}{n(\mathrm{Br_2})} \cdot n(\mathrm{Br_2}) \\ &= \frac{2}{3}\times 0.13767\; \rm mol \approx 0.0918\; \rm mol\end{aligned}[/tex].

Compare the [tex]n(\mathrm{AlBr_3})[/tex] value based on the two assumptions. Only the smallest value, [tex]n(\mathrm{AlBr_3}) \approx 0.0918\; \rm mol[/tex] (under the assumption that [tex]\rm Br_2\, (g)[/tex] is the limiting reactant,) would resemble the theoretical yield. The reason is that [tex]\rm Br_2\, (g)[/tex] would run out before all that [tex]\rm 5.0\; g[/tex] of [tex]\rm Al\, (s)[/tex] was converted to [tex]\rm AlBr_3\, (g)[/tex].

Apply the formula mass of [tex]\rm AlBr_3[/tex] to find the mass of that (approximately) [tex]0.0918\; \rm mol[/tex] of [tex]\rm AlBr_3[/tex] formula units:

[tex]\begin{aligned}m(\mathrm{AlBr_3}) &= n(\mathrm{AlBr_3}) \cdot M(\mathrm{AlBr_3}) \\ &= 0.0918\; \rm mol \times 266.698\; g \cdot mol^{-1} \approx 24\; \rm g\end{aligned}[/tex].

Answer:

Mass = 26.53 g

Explanation:

Heat of combustion = −1380.0 kJ/mol

This means 1 mol of the compound releases 1380 kJ

Molar mass = 44.53 g/mol

This means 1 mol of the compound has a mass of 44.53 g

How many grams would release 822kJ..?

First, we have to obtain the number of moles

1 mol = 1380

x = 822

x = 0.5957 moles

Moles = Mass / Molar mass

Mass = Molar mass * moles

Mass = 44.53 * 0.5957

Mass = 26.53 g

Answer:

C. To determine how efficient reactions are.

D. To determine how much reactant they need.

Explanation:

When you are doing a reaction, you are hoping for a percent yield to close of 100%. You make the reaction and determine how many product you obtain. If you know the percent yield of a reaction you can calculate the amount of reactant you need to obtain a determined amount of product.

Having this in mind:

A. To balance the reaction equation.  false. To calculate percent yield you need to balance the reaction before. You don't use percent yield to balance the reaction

B. To determine how much product they will need.  false. You determine how much product you obtain after the reaction. How much product you need is independent of percent yield

C. To determine how efficient reactions are.  true. A way to determine efficience of a reaction is with percent yield. An efficient reaction has a high percent yield.

D. To determine how much reactant they need. true. If you know percent yield of a reaction you can know how many reactant you must add to obtain  the amount of product you want.

Answer:

The reaction will shift leftwards, towards the formation of more cyclohexane at 25 °C

Explanation:

Hello,

In this case, for the given chemical reaction, we can write the law of mass action (equilibrium expression) as shown below:

[tex]Kc=\frac{[CH_3C_5H_9]}{[C_6H_{12} ]}[/tex]

Thus, since Kc < 1, we can conclude there are more moles of cyclohexane at equilibrium (denominator is greater than numerator), therefore, the reaction will shift leftwards, towards the formation of more cyclohexane at 25 °C.

Best regards.

Explanation:

The mass to charge ratio =136

Answer:

0.312g

Explanation:

From Avogadro's hypothesis, 1mole of any substance contains 6.02x10^23 molecules. This means that 1mole of sulphur also contains 6.02x10^23 molecules

1mole of sulphur = 32g

If 1 mole(i.e 32g) of sulphur contains 6.02x10^23 molecules

Then, Xg of sulphur will contain 5.87x10^21 molecules i.e

Xg of sulphur = (32x5.87x10^21)/6.02x10^23 = 0.312g

just saying this is not my work, thank Eduard22sly

he answered it on a different page

so give him credit

here is the link

https://brainly.com/question/14966520

Answer:

A.∆s>0contribute to spontaneity.

Answer:

CH3CH=NH2+>CH3CH2NH3+

Explanation:

If we look at the both species under review, we will realize that they are both amines hence they possess the polar N-H bond.

Electrons are ordinarily attracted towards the nitrogen atom hence making both compounds acidic. It is worthy of note that certain features of a compound may make it more acidic than another of close structural proximity. 'More acidic' simply means that the proton is more easily lost.

CH3CH=NH2+ contains an sp2 hybridized carbon atom which is highly electronegative and further withdraws electron density from the N-H bond thereby leading to a greater acidity of CH3CH=NH2+ compared to CH3CH2NH3+

Answer:

Oxygen and Chlorine

Explanation:

Covalent bonds involve the sharing of electrons between nonmetals.

Answer:

oxygen (O) and chlorine (Cl)

Explanation:

cuz i said so