Using standard heats of formation, calculate the standard enthalpy change for the following reaction. 2CO(g) + 2NO(g)2CO2(g) + N2(g)

The most abundant isotope of potassium is potassium-39, which has the symbol K-39 or simply ³⁹K,there are 20 neutrons.

To find the number of neutrons in this isotope, follow these steps:
1. Determine the atomic number of potassium: Potassium's atomic number is 19, which means it has 19 protons.
2. Refer to the isotope notation: Potassium-39 indicates it has a mass number of 39.
3. Calculate the number of neutrons: Subtract the atomic number (protons) from the mass number:
  Number of neutrons = Mass number - Atomic number
  Number of neutrons = 39 - 19
  Number of neutrons = 20
So, the most abundant isotope of potassium, K-39, contains 20 neutrons.

learn more about Potassium refer: https://brainly.com/question/14513133

#SPJ11

The equation that relates molarity to mass%, density of solution, and molar mass of solute is as follows:
Molarity = (mass% * density of solution * 10) / (molar mass of solute)

Molarity = (mass% * density of solution * 10) / (molar mass of solute)

Where mass% is the mass of the solute divided by the total mass of the solution, expressed as a percentage, and density of solution is the mass of the solution per unit volume (usually expressed in grams per liter). The factor of 10 is included to convert mass% from a percentage to a decimal fraction.

This equation can be derived from the definition of molarity, which is the number of moles of solute per liter of solution. By rearranging this equation, we can solve for the number of moles of solute:

moles of solute = Molarity * volume of solution

Next, we can substitute the definition of density of solution:

volume of solution = mass of solution / density of solution

We can also substitute the definition of mass%:

mass of solute = (mass% / 100) * mass of solution

Substituting these expressions into the equation for moles of solute, we get:

moles of solute = Molarity * (mass of solution / density of solution)

moles of solute = Molarity * [(mass% / 100) * mass of solution / density of solution]

Finally, we can use the definition of molar mass to express the mass of solute in terms of moles:

mass of solute = molar mass of solute * moles of solute

Substituting this expression into the equation for moles of solute, we get:

mass of solute = Molarity * [(mass% / 100) * mass of solution / density of solution] * molar mass of solute

Solving for Molarity, we get the equation shown at the beginning:

Molarity = (mass% * density of solution * 10) / (molar mass of solute)

To know more about molarity, refer to the link below:

https://brainly.com/question/16727614#

#SPJ11

To classify the substances into their respective bins, C belongs to the reductant bin, [tex]CIO^{-}[/tex] belongs to the oxidant bin, NO belongs to both the oxidant and reductant bins, and Ca in its ionic form belongs to the reductant bin.

To decide if every substance is probably going to act as an oxidant or reductant, we really want to consider their oxidation states.

Beginning with C, which has an oxidation condition of 0, it can go about as a reductant by giving electrons to another substance. Interestingly, [tex]CIO^{-}[/tex] has an oxidation condition of +1 and is probably going to act as an oxidant by tolerating electrons and becoming decreased.

Then, we have NO, which has an oxidation condition of +2. Contingent upon the response conditions, NO can go about as both an oxidant and a reductant.

For instance, within the sight of diminishing specialists like [tex]Fe_{2} ^{+}[/tex] or [tex]Sn_{2} ^{+}[/tex], NO can be decreased to [tex]N_{2} O[/tex], going about as an oxidant. On the other hand, within the sight of oxidizing specialists like [tex]Br_{2}[/tex] or [tex]H_{2} O_{2}[/tex], NO can be oxidized to [tex]N_{2} O[/tex], going about as a reductant.

In conclusion, we have Ca in its strong state, which has an oxidation condition of 0. Nonetheless, when it loses electrons to frame [tex]Ca_{2} ^{+}[/tex], it can go about as a reductant.

Thusly, we can put C in the reductant receptacle, [tex]CIO^{-}[/tex]in the oxidant canister, NO in both oxidant and reductant receptacles, and Ca in the reductant container when it is in its ionic structure.

To learn more about reductant bin, refer:

https://brainly.com/question/29740395

#SPJ4

The complete question is:

Part A By using the data in Appendix E, determine whether each of the following substances is likely to serve as an oxidant or a reductant Drag the appropriate items to their respective bins. Reset Help C(0) CIOC) NO) Ca(s) Oxidant Reductant Subrnit Request Answer

The most important molecule in the ecosystem is oxygen (O2). Therefore the correct option is option D.

As it is used in the process of cellular respiration to produce energy, oxygen is crucial for the survival of the majority of Earth's creatures.

Organic substances, such as glucose, are broken down during cellular respiration to release energy, while oxygen serves as the final electron acceptor in the electron transport chain.

ATP is produced as a result of this process, and cells use ATP as a source of energy.

Other crucial ecological processes that include oxygen include the oxidation of contaminants and the creation of ozone, which helps shield the planet from the sun's harmful UV radiation. Therefore the correct option is option D.

For such more question on ecosystem:

https://brainly.com/question/26046675

#SPJ11

The population of an organism will likely decrease if there is an increase in C, predators that prey on the organism.

Predator populations may expand due to a variety of factors, including increased food supply, decreased competition from other predators, favorable weather conditions, and efficient mating and reproduction as they need prey to survive and expand.

Human actions such as predator eradication or the introduction of non-native predator species can also result in an increase in predator populations. An ecosystem can experience drastic changes due to these foreign invasions.

Find out more on population growth here: https://brainly.com/question/1437549

#SPJ1

(a) The minimum frequency  and the maximum wavelength of the photon required to dissociate the NaCl molecule are 6.432 x 10^14 Hz and  4.66 x 10^-7 m.

(b) The photon is in  UV-A region of the electromagnetic spectrum.

(a) The minimum frequency of the photon required to dissociate the NaCl molecule can be calculated using the formula E = hν, where E is the bond energy of NaCl, h is the Planck's constant (6.626 x 10^-34 J s), and ν is the frequency of the photon.

Thus, ν = E/h = 4.26 eV/6.626 x 10^-34 J s = 6.432 x 10^14 Hz.

Using the formula c = λν, where c is the speed of light (3.00 x 10^8 m/s) and λ is the wavelength of the photon, we can calculate the maximum wavelength of the photon required to dissociate the NaCl molecule:

λ = c/ν = 3.00 x 10^8 m/s / 6.432 x 10^14 Hz = 4.66 x 10^-7 m.

(b) The frequency calculated above corresponds to a photon in the ultraviolet (UV) region of the electromagnetic spectrum, which has frequencies ranging from 10^14 Hz to 10^16 Hz and wavelengths ranging from 10 nm to 400 nm.

The maximum wavelength calculated above (4.66 x 10^-7 m) falls within the UV-A region, which has longer wavelengths (315-400 nm) compared to UV-B (280-315 nm) and UV-C (100-280 nm).

for more such question on  electromagnetic spectrum

https://brainly.com/question/28035263

#SPJ11

Age, heat, and magnetic orientation are distinct concepts in different domains:

Age: Age refers to the length of time that has passed since a particular event or the duration of existence of an object or organism. In the context of living organisms, age typically refers to the number of years that have elapsed since birth or a specific milestone. Age can be used to measure the maturity, development, or lifespan of individuals or entities.

Heat: Heat is a form of energy associated with the motion of particles within a substance. It is commonly understood as the transfer of thermal energy between objects or systems that have different temperatures. Heat can cause changes in temperature, state, or phase of a substance. It is typically measured in units such as joules or calories.

Magnetic orientation: Magnetic orientation refers to the alignment or positioning of an object or material with respect to a magnetic field. Certain materials, such as magnets or ferromagnetic substances, can be influenced by magnetic fields and exhibit specific orientations. Magnetic orientation is often studied in the context of magnetism, magnetic materials, and applications such as compasses, where objects align themselves with the Earth's magnetic field.

These concepts are distinct and unrelated to each other. Age pertains to time, heat pertains to energy transfer, and magnetic orientation pertains to the alignment of objects in a magnetic field.

Learn more about magnetic orientation,

https://brainly.com/question/14319360

#SPJ4

1. Sodium Carbonate: Yes, the solubility of sodium carbonate changes with pH. At a pH of 11.2, the solubility of sodium carbonate is at its highest, with a solubility of 111.1 g/L.

At a pH below 11.2, the solubility of sodium carbonate decreases; at a pH above 11.2, the solubility of sodium carbonate increases, but not as dramatically as at a pH of 11.2.

This is due to the fact that at a pH of 11.2, the concentration of carbonate ions is at its highest, and the solubility of sodium carbonate is largely dependent on the concentration of carbonate ions.

Know more about Sodium Carbonate here

https://brainly.com/question/13645481#

#SPJ11

Thermoplastic polymers have the unique property of being able to be reshaped when heated, making them ideal for various applications such as 3D printing and molding.

This is due to their linear molecular structure, which allows for easy movement of polymer chains when heated.

Polymers that can be reshaped when heated are called thermoplastic polymers, and their linear molecular structure allows for easy movement of polymer chains.

Polymers that can be reshaped when heated are called thermoplastic polymers.
Thermoplastic polymers are a type of polymer that becomes pliable or moldable when heated, and solidifies upon cooling.

This property allows them to be reshaped and reformed multiple times without undergoing significant degradation in their mechanical properties or composition.

Hence,  Thermoplastic polymers can be reshaped when heated, which makes them versatile and widely used in various industries.

learn more about Thermoplastic click here:

https://brainly.com/question/1339335

#SPJ11

Answer:

Low humidity can be found in different continents and climates but Nevada has the lowest humidity.

Explanation:

:)

Burning coal to generate electricity creates all of the following types of pollution EXCEPT: A) water pollution. When coal is burned to generate electricity, it produces various types of pollution such as particulates (B), thermal pollution (C), and mercury (D). Coal combustion indeed produces all the mentioned pollutants (E). However, it does not directly create water pollution (A).

Here is a brief explanation of each type of pollution:
B) Particulates: Coal combustion releases fine particles into the air, which can cause respiratory issues and other health problems.
C) Thermal pollution: The process of generating electricity from coal involves producing heat, which can raise the temperature of nearby water bodies. This increase in temperature can harm aquatic life and disrupt ecosystems.
D) Mercury: Coal contains trace amounts of mercury, which is released when coal is burned. Mercury pollution can contaminate water and accumulate in fish, leading to health risks for humans who consume the affected fish.
E) Coal combustion produces all above pollutants: Coal combustion is responsible for releasing particulates, causing thermal pollution, and emitting mercury into the environment.
In summary, while coal combustion contributes to various types of pollution, it does not directly cause water pollution.

For more information on water pollution see:

https://brainly.com/question/19920929

#SPJ11

The product obtained from the oxidation of cis-2-methyl cyclohexanol with NaOCl is 2-methyl cyclohexanone, along with sodium chloride and water as byproducts.

Oxidation is a chemical process that involves the loss of electrons or the gain of oxygen atoms by a substance. It is a fundamental concept in chemistry and plays a critical role in many chemical reactions. In oxidation, the oxidizing agent (often oxygen) accepts electrons from the reducing agent, which loses electrons. As a result of this transfer of electrons, the reducing agent is oxidized, and the oxidizing agent is reduced.

One of the most well-known examples of oxidation is rusting, in which iron reacts with oxygen to form iron oxide. Combustion reactions, such as the burning of fuels, also involve oxidation. Oxidation can be used in many industrial applications, such as in the production of chemicals, as well as in biological systems, such as the breakdown of food for energy.

To learn more about Oxidation visit here:

brainly.com/question/16976470

#SPJ4

The solubility of Zinc hydroxide, Zn(OH)₂, in water when dilute nitric acid is added to it will decrease. Option D

Zinc hydroxide is an insoluble salt that can dissolve in water to a certain extent. The solubility of Zn(OH)₂ in water is relatively low, but it can be increased by adding an acid. When dilute nitric acid is added toZn(OH)₂the acid will react with the hydroxide ions (OH-) in the salt to form water and a nitrate salt.

The reaction can be represented as follows:

Zn(OH)₂(s) + 2HNO₃(aq) → Zn(NO₃)₂(aq) + 2H₂O(l)

As a result of this reaction, the concentration of hydroxide ions in the solution decreases, which leads to a decrease in the solubility of Zn(OH)₂. Therefore, the correct answer is D, which states that the solubility of Zn(OH)₂ decreases when dilute nitric acid is added to it.

Learn more about  Zinc hydroxide,

https://brainly.com/question/28232373

#SPJ4

In a two solvent hexane-acetone gradient for an alumina HPLC column, acetone solvent is gradually increased.For a C18 column with water and methanol two solvents are used for gradient elution, methanol solvent is gradually increased in percentage.

a) In a two solvent hexane-acetone gradient for an alumina HPLC column, acetone is gradually increased. This is because hexane is a non-polar solvent, while acetone is more polar. Increasing the polarity of the mobile phase with acetone improves the separation of compounds on the alumina stationary phase, which is polar in nature.

b) For a C18 column with water and methanol as two solvents used for gradient elution, methanol percentage is gradually increased. The reason for this is that the C18 column consists of non-polar stationary phase, and water is polar while methanol is less polar. By increasing the percentage of methanol, the elution strength increases and compounds with varying polarities can be effectively separated on the non-polar C18 column.

Learn more about HPLC : https://brainly.com/question/30915499

#SPJ11

Fossil fuels are formed over millions of years from the remains of dead plants and animals that have been buried under layers of rock and sediment.

These fuels contain stored carbon that was originally absorbed by the plants and animals during their lifetime. Examples of fossil fuels include coal, oil, and natural gas. When these fuels are burned for energy, the carbon is released into the atmosphere in the form of carbon dioxide, which contributes to climate change. Natural gas is a combustible mixture of hydrocarbons and other organic compounds that is found beneath the Earth's surface. Coal is a non-renewable fossil fuel that is used to generate electricity and heat, and is also used in the production of steel, cement, and other industrial products.

To learn more about carbon click here https://brainly.com/question/13719781

#SPJ11

Qualities of a solution known as coagulative qualities rely on the quantity of solute particles present but not on the kind of solute.

Boiling point elevation, osmotic pressure, and vapour pressure depression are a few examples of colligative qualities. Solubility is the response to the query of what is not a collative property.

The amount of a solute that can dissolve in a solvent is known as its solubility, and the solute's type does affect this quantity. Solubility is not a collative quality, then.

Learn more about   colligative property at:

https://brainly.com/question/30799665

#SPJ1

The volume occupied by 0.50 mole of the gas at a temperature of 35 °C and at 1 atm is 12.6 L (3rd option)

We can obtain the volume of the gas by using the ideal gas equation as shown below:

PV = nRT

1 × V = 0.50 × 0.0821 × 308

V = 12.6 L

Thus, from the above calculation, it is evident that the volume of gas is 12.6 L (3rd option)

Learn more about volume:

https://brainly.com/question/21838343

#SPJ1

The original volume that was occupied by the Fivonine gas is 318 mL.

According to the Boyle's law; as long as the temperature and volume of the gas remain constant, the law asserts that the pressure of a gas is inversely proportional to its volume, or that as volume falls, pressure increases, and vice versa.

We know that;

P1V1 = P2V2

Then;

P1 = 900 torr or 1.18 atm

P2 = 1.50 atm

V1 = ?

V2 = 250 mL

Then V1 = P2V2/P1

V1= 1.50 * 250/1.18

V1 = 318 mL

This is the original volume.

Learn more about Boyles's law:https://brainly.com/question/30367133

#SPJ1

The determine the half-life for the decomposition of substrate 1, we first need to plot the initial rate data. From the given data, we can see that the initial rate is constant for different initial concentrations of substrate 1. This means that the reaction follows first-order kinetics.

The rates law for a first order reaction rate = k [substrate 1] where k is the rate constant, we can calculate the rate constant for the reaction. From the data, we know that the initial rate is 0.595 m/s when [substrate 1] = 0.5 M. Substituting these values into the rate law, we get 0.595 m/s = k 0.5 M Solving for k, we get k = 1.19 s^-1. Now that we have the rate constant, we can use the half-life formula for a first-order reaction t1/2 = ln (2) / k where ln (2) is the natural logarithm of 2 approximately 0.693. Substituting the given initial concentration of substrate 1 2.31 M and the rate constant 1.19 s^-1 into the formula, we get t1/2 = ln (2) / 1.19 s^-1 / 2.31 M t1/2 = 0.49 s Therefore, the half-life for the decomposition of substrate 1 when the initial concentration of the substrate is 2.31 M is 0.49 seconds.

learn more about decomposition here.

https://brainly.com/question/8009068

#SPJ11

(a) Capacitance between anodized aluminum struts and space is 4.34x[tex]10^-13 F.[/tex]

(b) Energy that could be dissipated by an arc discharge is 1.07x[tex]10^-6 J[/tex]

(c) Anodized aluminum coating should be at least 1.49 microns thick to avoid breakdown under an electric field strength of 105V/cm.

(a) The capacitance between the object and space can be calculated using the formula:

C = εA/d

where C is the capacitance, ε is the permittivity of free space, A is the area of one strut, and d is the separation distance between the object and space (assumed to be the Debye length).

The area of one strut is given by:

A = [tex]πr^2 = π(0.125 m)^2 = 0.0491 m^2[/tex]

The Debye length for a typical plasma in space is on the order of 1 meter. So, we have:

d = 1 m

Plugging in these values, we get:

C = εA/d = (8.85x[tex]10^-12 F/m[/tex])(0.0491 [tex]m^2[/tex])/(1 m) = 4.34x[tex]10^-13 F[/tex]

(b) The energy that could be dissipated by an arc discharge to space can be calculated using the formula:

E = [tex]1/2CV^2[/tex]

where E is the energy, C is the capacitance (which we calculated in part (a)), and V is the voltage difference between the object and space (which is 140 volts).

Plugging in these values, we get:

E = 1/2(4.34x[tex]10^-13 F[/tex])(140 [tex]V)^2[/tex] = 1.07x[tex]10^-6 J[/tex]

(c) The breakdown voltage for anodized aluminum depends on the thickness of the coating. A commonly used empirical formula for the breakdown voltage of anodized aluminum coatings is:

V_bd = 1.7[tex]t^-0.5[/tex]

where V_bd is the breakdown voltage in volts, and t is the thickness of the coating in microns.

Assuming a factor of safety of 2, we want the breakdown voltage to be at least twice the voltage at which the station floats (140 volts negative), or 280 volts.

Solving the formula above for t, we get:

t = [tex](1.7 / V_bd)^2[/tex]

Plugging in 280 volts for V_bd, we get:

t = [tex](1.7 / 280)^2[/tex] = 1.49 microns

Therefore, the anodized aluminum coating should be at least 1.49 microns thick to avoid breakdown at an electric field strength of 105V/cm, assuming a factor of safety of 2.

Learn more about capacitance

https://brainly.com/question/28445252

#SPJ4

You carried out a qualitative test for this experiment to see if soap was produced particular with the characteristics/signal. To test soap purity/formation: dissolve soap in water, add saturated salt solution to precipitate impurities, observe clarity, and check pH (9-10) to confirm soap formation.

To test for the purity/formation of the desired soap product, you can follow these steps:

1. Prepare a saturated salt solution: Dissolve a sufficient amount of common salt (sodium chloride) in water until no more salt can dissolve, creating a saturated solution.

2. Take a small sample of your soap product and dissolve it in a separate container with a small amount of distilled water. Stir the solution thoroughly to ensure the soap has fully dissolved.

3. Add the saturated salt solution to the dissolved soap sample. The presence of the saturated salt solution will cause impurities and excess reactants to precipitate out, while the soap will remain in solution.

4. Observe the mixture for any changes in its appearance. A clear and transparent solution indicates the formation of a pure soap product. Conversely, cloudiness or precipitates indicate the presence of impurities or unreacted starting materials.

5. To confirm your results, you can perform additional tests such as a pH test. Soap generally has a pH value between 9 and 10. Using a pH indicator or pH meter, you can check the pH of the soap solution. A pH within the expected range supports the conclusion that the desired soap product has been formed.

By following these steps and observing the specific features/signals mentioned, you can determine the purity and formation of your soap product in a qualitative manner.

To know more about the qualitative test refer here :

https://brainly.com/question/5949851#

#SPJ11

If two atoms are joined by a polar covalent bond, the atom with the lower electronegativity will have a partial positive charge.

If two atoms are joined by a polar covalent bond, the atom with the lower electronegativity will have a partial positive charge. In a polar covalent bond, electrons are shared unequally between the two atoms, leading to a difference in charge across the bond.

The atom with the higher electronegativity attracts the shared electrons more strongly, resulting in a partial negative charge on that atom, while the atom with lower electronegativity has a partial positive charge.

To know more about covalent bonds, refer

https://brainly.com/question/3447218

#SPJ11

This balloon would contain 0.399 moles of H atoms. This amount of H atoms may seem small, but it is significant in terms of chemical reactions and reactions that produce gas.

To determine the number of moles of H atoms in 2.0 grams of C2H6, we need to first calculate the molar mass of C2H6. The molar mass of C2H6 is 30.07 g/mol, which means that 2.0 grams of C2H6 is equivalent to

\frac{2.0}{30.07} = 0.0665 moles of C2H6.
C2H6 has a molecular formula that consists of two carbon atoms and six hydrogen atoms. Therefore, to find the number of moles of H atoms, we need to multiply the number of moles of C2H6 by the number of H atoms per molecule. In this case, there are 6 H atoms in one molecule of C2H6.
Thus, the number of moles of H atoms in 2.0 grams of C2H6 is:
0.0665 moles of C2H6 * 6 H atoms per molecule = 0.399 moles of H atoms.
To put it in perspective, imagine a balloon filled with 2.0 grams of C2H6.

learn more about molar mass Refer: https://brainly.com/question/14356143

#SPJ11

The correct integrated rate laws for each reaction order are as follows:

Reaction Order: Zero

Integrated Rate Law: d. (A)t = kt + (A)0

Reaction Order: First

Integrated Rate Law: c. ln(A)t = kt + ln(A)0

Reaction Order: Second

Integrated Rate Law: e. (A)t = kt + (A)0

Integrated rate laws are mathematical expressions that describe the concentration or amount of a reactant or product as a function of time during a chemical reaction.

These equations are derived from the differential rate laws, which describe the rate of a reaction as a function of the concentrations of the reactants.

To learn more about the integrated rate laws, follow the link:

https://brainly.com/question/13264346

#SPJ12

In an experiment 4.5kg of a fuel was completely burnt. The heat produced was measured to be 180000 KJ. 40,000KJ/g is the calorific value of the fuel​.

The quantity of heat that a substance generates upon complete combustion is defined by its calorific value, which indicates the energetic component of the elements. It can be expressed as the high heating value or the gross calorie value (GCV). Additionally, the particular amount of energy of burning for a unit mass is what is known as a substance's calorific value.

Weight of fuel burnt = 4.5 kg

Heat produced by 4.5 kg of fuel = 180,000 kJ.

calorific value=180,000 / 4.5

                      =40,000KJ/g

To know more about calorific value, here:

https://brainly.com/question/19580135

#SPJ1

The amount of dextrose contained in 250 mL of D10W is 25 g .

To determine the amount of dextrose contained in 250 mL of D10W, you can follow these steps:
Step 1: Understand the meaning of D10W.
D10W stands for a 10% dextrose solution in water, meaning that there is 10 grams of dextrose per 100 mL of solution.
D10W is a common solution used in healthcare settings, and it is important for healthcare providers to understand the concentration of dextrose in this solution in order to provide appropriate care to their patients. It is worth noting that the amount of dextrose in D10W can vary depending on the specific formulation used.
Step 2: Calculate the amount of dextrose in 250 mL.
To find the amount of dextrose in 250 mL, use the proportion:
(\frac{10 g dextrose }{ 100 mL solution}) = (\frac{x g dextrose }{ 250 mL solution})
Step 3: Solve for x.
Cross-multiply and solve for x:
10 g * 250 mL = 100 mL * x g
2500 g = 100x
x = 25 g

learn more about dextrose refer: https://brainly.com/question/30673665

#SPJ11

Identify the emission and excitation spectra, look for the specific characteristics mentioned above. The excitation spectrum will be the one that most resembles absorbance, as it shows the wavelengths of light absorbed by the nanocrystals.

Based on your question, you are provided with the fluorescence emission and excitation spectra of lead-selenium nanocrystals. To identify each spectrum, keep in mind the following:
1. Emission spectrum: This represents the wavelengths of light emitted by the nanocrystals when they return to their ground state from an excited state. It is typically characterized by sharp, well-defined peaks at specific wavelengths.
2. Excitation spectrum: This represents the wavelengths of light that are effective in exciting the nanocrystals to a higher energy state. It usually exhibits broader peaks and may be less well-defined than the emission spectrum.
To identify the spectrum that most resembles absorbance, look for the excitation spectrum. This is because the excitation spectrum provides information about which wavelengths of light are being absorbed by the nanocrystals in order to be excited to a higher energy state.

In a fluorescence microscope, the emission filter has the function of selectively allowing light of a certain wavelength or range of wavelengths that correspond to the fluorescence emitted by the specimen to pass while blocking light of other wavelengths.

Learn more about microscope here

https://brainly.com/question/30320097

#SPJ11

When (CH3)3CBr combines with aqueous sodium hydroxide to produce (CH3)3COH and NaBr, the reaction type is B. Elimination.

The large tert-butyl group is removed in favour of a more stable carbocation intermediate in this example of an E2 (bimolecular elimination) reaction. The hydroxide ion functions as a base in this one-step reaction, breaking the bond between the leaving group and the carbon next to it while also abstracting a proton from that carbon. As a result, the leaving group NaBr and the alkene (CH3)3COH are created. Since SN1 and SN2 reactions involve nucleophilic substitution at the electrophilic carbon, this reaction is not one of those types.

learn more about hydroxide here:

https://brainly.com/question/4251554

#SPJ11

To determine which of the following compounds has a linear molecular geometry, let's first understand what linear molecular geometry is. Linear molecular geometry occurs when a molecule's central atom is surrounded by two bonding pairs of electrons, creating a straight line with a bond angle of 180 degrees.

Now, let's analyze each compound:
i. GaI3: Gallium has three valence electrons and is bonded to three iodine atoms, each providing one electron. This forms a trigonal planar geometry with bond angles of 120 degrees, so it is not linear.
ii. SF4: Sulfur has six valence electrons and is bonded to four fluorine atoms, with one lone pair on the sulfur. This forms a see-saw geometry with bond angles deviating from 120 and 90 degrees, so it is not linear.
iii. NF3: Nitrogen has five valence electrons and is bonded to three fluorine atoms, with one lone pair on the nitrogen. This forms a trigonal pyramidal geometry with bond angles of around 107 degrees, so it is not linear.
iv. KrF2: Krypton has eight valence electrons and is bonded to two fluorine atoms, with three lone pairs on the krypton. This results in a linear molecular geometry with a bond angle of 180 degrees.
So, among the given compounds, KrF2 has a linear molecular geometry.

For more information on central atom see:

https://brainly.com/question/29422259

#SPJ11