Answer: E = - 19.611×[tex]10^{-18}[/tex] J
Explanation: The lowest possible energy can be calculated using the formula:
[tex]E_{n} = - Z^{2}.\frac{k}{n^{2}}[/tex]
where:
Z is atomic number of the atom;
k is a constant which contains other constants and is 2.179×[tex]10^{-18}[/tex] J
n is a layer;
For the lowest possible, n=1.
Atom of Lithium has atomic number of Z=3
Substituing:
[tex]E_{1} = - 3^{2}.\frac{2.179.10^{-18}}{1}[/tex]
[tex]E_{1} =[/tex] [tex]-19.611.10^{-18}[/tex] J
The energy for the electron in the [tex]Li^{+2}[/tex] ion is - 19.611 joules
The lowest possible energy, in Joules, for the electron in the [tex]Li^{2+}[/tex] ion is equal to [tex]1.96\times 10^{-17}\; Joules[/tex]
To determine the lowest possible energy, in Joules, for the electron in the [tex]Li^{2+}[/tex] ion, we would use the Bohr model:
Mathematically, Bohr's model is given by the equation:
[tex]Energy = -Z^2 \frac{k}{n^2}[/tex]
Where:
Z is the atomic number of an atom.n is the number of energy level.k is Rydberg constant.We know that the atomic number of lithium (Li) is equal to 3.
Also, at the lowest possible energy, n = 1.
Rydberg constant = [tex]2.179 \times 10^{-18}[/tex]
Substituting the parameters into the equation, we have;
[tex]E_1 = -3^2 \times \frac{2.179 \times 10^{-18}}{1^2} \\\\E_1 =9 \times 2.179 \times 10^{-18}\\\\E_1 =1.96\times 10^{-17}\; Joules[/tex]
Find more information: brainly.com/question/18214726
Sometimes a nuclide is referenced by the name of the element followed by the:______
a. atomic number
b. mass number
c. electrical charge
d. none of the above
Answer:
The correct option is d
Explanation:
Nuclide is synonymous with groups of electrons or protons, that is, a nuclide is the grouping of nucleons.
Which of the following best describes hydrocarbons? a. Alkanes in which a hydrogen atom is replaced by a hydroxyl group b. Binary compounds of carbon and hydrogen c. Organic compounds containing water and carbon d. Covalently bonded carbon compounds which have intermolecular force attractions to hydrogen compounds e. Compounds which are formed by the reaction of a naturally occurring carbon-containing substance and water
Answer:
b. Binary compounds of carbon and hydrogen
Explanation:
Before proceeding, Hydrocarbons refers to organic chemical compounds composed exclusively of hydrogen and carbon atoms. This means the only elements present in an hydrocarbon are;
- Carbon
- Hydrogen
Looking through the options;
- Option A: This is wrong because the hydroxyl group contains oxygen and hydrocarbons contain only hydrogen and carbon.
- option B: This is correct. Binary compounds refers to compounds with just two elements.
- option C: This is wrong because water contains oxygen and hydrocarbons contain only hydrogen and carbon.
- option D: Carbon atoms can contain other elements so this option is wrong.
- option E: This also wrong because we had already gotten the correct option.
A compound decomposes with a half-life of 8.0 s and the half-life is independent of the concentration. How long does it take for the concentration to decrease to one-ninth of its initial value
Answer:
The concentration takes 25.360 seconds to decrease to one-ninth of its initial value.
Explanation:
The decomposition of the compound has an exponential behavior and process can be represented by this linear first-order differential equation:
[tex]\frac{dc}{dt} = -\frac{1}{\tau}\cdot c(t)[/tex]
Where:
[tex]\tau[/tex] - Time constant, measured in seconds.
[tex]c(t)[/tex] - Concentration of the compound as a function of time.
The solution of the differential equation is:
[tex]c(t) = c_{o} \cdot e^{-\frac{t}{\tau} }[/tex]
Where [tex]c_{o}[/tex] is the initial concentration of the compound.
The time is now cleared in the result obtained previously:
[tex]\ln \frac{c(t)}{c_{o}} = -\frac{t}{\tau}[/tex]
[tex]t = -\tau \cdot \ln \frac{c(t)}{c_{o}}[/tex]
Time constant as a function of half-life is:
[tex]\tau = \frac{t_{1/2}}{\ln 2}[/tex]
Where [tex]t_{1/2}[/tex] is the half-life of the composite decomposition, measured in seconds.
If [tex]t_{1/2} = 8\,s[/tex], then:
[tex]\tau = \frac{8\,s}{\ln 2}[/tex]
[tex]\tau \approx 11.542\,s[/tex]
And lastly, given that [tex]\frac{c(t)}{c_{o}} = \frac{1}{9}[/tex] and [tex]\tau \approx 11.542\,s[/tex], the time taken for the concentration to decrease to one-ninth of its initial value is:
[tex]t = -(11.542\,s)\cdot \ln\frac{1}{9}[/tex]
[tex]t \approx 25.360\,s[/tex]
The concentration takes 25.360 seconds to decrease to one-ninth of its initial value.
What is the major organic product obtained from the following sequence of reactions? PhCH2CHO PhCH2CH2CHO PhCH2CH2COOH PhCH2COOH
Answer:
PhCH2CH2COOH
Explanation:
This is a reaction of PhCH2CH2Br with KCN in the presence of H3O^+. The reaction first leads to the formation of PhCH2CH2CN.
We must recall that part of the properties of nitriles is that they can be converted to carboxylic acids in the presence of H3O^+. This is a common synthetic route for carboxylic acids.
Therefore, when the PhCH2CH2CN is now further reacted with H3O^+, the carboxylic acid PhCH2CH2COOH is formed as the major organic product of the reaction, hence the answer given above.
What is the osmolarity of a 0.20 M solution of KCI?
A) 0.40 Osmol
B) 0.30 Osmol C) 0.20 Osmol D) 0.80 Osmol
E) 0.10 Osmol
Answer:
Osmolarity of solution of KCI = 0.40 osmol
Explanation:
Given:
KCL ⇒ K⁺ + Cl⁻
Find:
Osmolarity of solution of KCI
When M = 0.20 M
Computation:
1 mole of KCL = 2 osmol
1 M of KCl = 2 Osmolarity
So,
Osmolarity of solution of KCI = 2 × 0.20
Osmolarity of solution of KCI = 0.40 osmol
What element is primarily used in appliances to make electronic chips
A. Silicon (Si)
B. Nickel (Ni)
C. Copper (Cu)
D. Selenium (Se)
Answer:
Option A
Explanation:
Silicon (Obtained from Sand (SiO2)) is the element that is primarily used in appliances to make electronic chips.
Answer:
A. Silicon (Si)
Explanation:
Silicon (Si) is primarily used as a semiconductor material to make electronic chips.
If a radioactive isotope of thorium (atomic number 90, mass number 232) emits 6 alpha particles and 4 beta particles during the course of radioactive decay, what is the mass number of the stable daughter product?
Answer:
The mass number of the stable daughter product is 208
Explanation:
First thing's first, we have to write out the equation of the reaction. This is given as;
²³²₉₀Th → 6 ⁴₂α + 4 ⁰₋₁ β + X
In order to obtain the identity of X, we have to obtain it's mass numbers and atomic number.
There is conservation of matter so we expect the mass number to remain the same in both the reactant and products.
Mass Number
Reactant = 232
Product = (6* 4 = 24) + (4 * 0 = 0) + x = 24 + x
since reactant = product
232 = 24 + x
x = 232 - 24 = 208
Atomic Number
Reactant = 90
Product = (6* 2 = 12) + (4 * -1 = -4) + x = 8 + x
since reactant = product
90 = 8 + x
x = 90 - 8 = 82
A student mixes 43.8 mL of acetone (58.08 g/mol, 0.791 g/mL) with excess benzaldehyde and NaOH to produce 79.4 g of (1E,4E)-1,5-diphenylpenta-1,4-dien-3-one (234.29 g/mol). What is the percent yield of this student's experiment
Answer:
% yield of the student's experiment is
[tex]\frac{0.34}{0.60}[/tex] ˣ 100 = 56.67%
Explanation:
given
volume of acetone= 43.8 mL
molar weight of acetone = 58.08 g/mol
density of acetone = 0.791 g/mL
A student mixes 43.8 mL of acetone (58.08 g/mol, 0.791 g/mL)
43.8 mL = 43.8mL × 0.791g/mL
= 34.6458g ≈34.65g
1 mole of acetone = 58.08g
∴34.65g = 34.65g/58.08g
= 0.60mol
molecular weight of the product 1,5-diphenylpenta-1,4-dien-3-one = 234.29 g/mol
mole = mass/ molar weight
mole = 79.4g/ 234.29g/mol
mole(n) = 0.3389mol ≈ 0.34mol
1 mole of acetone will produce 1 mole of the product
∴0.60mol of acetone will produce 0.60mol of the product
but we get 0.34mol of the product
∴ % yield of the student's experiment is
[tex]\frac{0.34}{0.60}[/tex] ˣ 100 = 56.67%
For dinner you make a salad with lettuce, tomatoes, cheese, carrots, and
croutons. Your salad would be classified as a(n)
O A. compound
OB. element
OC. homogeneous mixture
D. heterogeneous mixture
A heterogeneous mixture
The addition of 0.242 L of 1.92 M KCl to a solution containing Ag+ and Pb2+ ions is just enough to precipitate all of the ions as AgCl and PbCl2. The total mass of the resulting precipitate is 65.08 g. Find the mass of PbCl2 and AgCl in the precipitate. Calculate the mass of PbCl2 and AgCl in grams.
Answer:
Mass PbCl₂ = 50.24g
Mass AgCl = 14.84g
Explanation:
The addition of Cl⁻ ions from the KCl solution results in the precipitation of AgCl and PbCl₂ as follows:
Ag⁺ + Cl⁻ → AgCl(s)
Pb²⁺ + 2Cl⁻ → PbCl₂(s)
If we define X as mass of PbCl₂, moles of Cl⁻ from PbCl₂ are:
Xg × (1mol PbCl₂/ 278.1g) × (2moles Cl⁻ / 1 mole PbCl₂) = 0.00719X moles of Cl⁻ from PbCl₂
And mass of AgCl will be 65.08g-X. Moles of Cl⁻ from AgCl is:
(65.08g-Xg) × (1mol AgCl/ 143.32g) × (1mole Cl⁻ / 1 mole AgCl) = 0.45409 - 0.00698X moles of Cl⁻ from AgCl
Moles of Cl⁻ that were added in the KCl solution are:
0.242L × (1.92mol KCl / L) × (1mole Cl⁻ / 1 mole KCl) = 0.46464 moles of Cl⁻ added.
Moles Cl⁻(AgCl) + Moles Cl⁻(PbCl₂) = Moles Cl⁻(added)
0.45409 - 0.00698X moles + (0.00719X moles) = 0.46464 moles
0.45409 + 0.00021X = 0.46464
0.00021X = 0.01055
X = 0.01055 / 0.00021
X = 50.24g
As X = Mass PbCl₂
Mass PbCl₂ = 50.24gAnd mass of AgCl = 65.08 - 50.24
Mass AgCl = 14.84gThe masses of the compounds in the precipitate can be found my knowing
the number of moles of chloride ion contributed by each compound.
The mass of PbCl₂ in the precipitate is approximately 49.24 gThe mass of AgCl in the precipitate is approximately 15.84 gReasons:
The given parameter are;
Volume of KCl solution added = 0.242 L
Concentration of KCl solution = 1.92 M KCl
The ions in the solution to which KCl is added = Ag⁺ and Pb²⁺ ions
Precipitates formed = AgCl and PbCl₂
The mass of the precipitate = 65.08 g
Required:
The mass of PbCl₂ and AgCl in the precipitate
Solution;
Number of moles of chloride ions in a mole of PbCl₂ = 2 moles
Number of moles of chloride ions in a mole of AgCl = 1 mole
Let X represent the mass of PbCl₂ in the precipitate, we have;
The mass of AgCl in the precipitate = 65.08 g - X
[tex]\mathrm{Number \ of \ moles \ of \ PbCl_2} = \dfrac{X \, g}{278.1 \, g} =\mathbf{ \dfrac{X }{278.1}}[/tex]
Number of moles of chloride ions from PbCl₂ is therefore;
[tex]\mathrm{Number \ of \ moles \ of \ Cl^- from \ PbCl_2} =\mathbf{ 2 \times \dfrac{X }{278.1} \ moles \ of \ Cl^-}[/tex]
[tex]\mathrm{Number \ of \ moles \ of \ AgCl \ in \ the \ precipitate} = \dfrac{65.08 -X }{143.32}[/tex]
[tex]\mathrm{Number \ of \ moles \ of \ Cl^- from \ AgCl} = \mathbf{ \dfrac{65.08 -X }{143.32}} \ moles \ of \ Cl^-[/tex]
The number of moles of chloride ions from one mole of KCl = 1 mole
Number of moles of chloride ions from 0.242 L of 1.92 M KCl is therefore;
0.242 L × 1.92 moles/L = 0.46464 moles
Number of moles of chloride ions from KCl = 0.46464 moles
[tex]0.46464 \ moles \ from \ KCl = \overbrace{ \dfrac{ 2 \times X }{278.1} + \dfrac{65.08 -X }{143.32}} \ moles \ in \ PbCl_2 \ and \ AgCl[/tex]
Which gives;
[tex]\displaystyle \frac{192}{896089} \cdot X + \frac{1627}{3583} = \frac{1452}{3125}[/tex]
Therefore;
[tex]\displaystyle X = \frac{\frac{1452}{3125} - \frac{1627}{3583} }{ \frac{192}{896089} } = \frac{105864850549}{2149800000} \approx \mathbf{ 49.24}[/tex]
The mass of PbCl₂ in the precipitate, X ≈ 49.24 g
The mass of AgCl in the precipitate = 65.08 g - 49.24 g ≈ 15.84 g
Learn more here:
https://brainly.com/question/13652772
Ammonia is oxidized with air to form nitric oxide in the first step of the production of nitric acid. Two principal gas-phase reactions occur:
Answer:
4NH₃(g) + 5O₂(g) → 4NO(g) + 6H₂O
2NO(g) + O₂(g) → 2 NO₂
Explanation:
First of all, we need to consider the reaction for production of ammonia. In this reaction we have as reactants, nitrogen and hydroge.
3H₂ (g) + N₂(g) → 2NH₃ (g)
Afterwards, ammonia reacts to oxygen, to produce NO and H₂O
The equation for the process will be:
4NH₃(g) + 5O₂(g) → 4NO(g) + 6H₂O
Then, we take the nitric oxide to make it react, to produce NO₂, in order to produce nitric acid, for the final reaction:
2NO(g) + O₂(g) → 2 NO₂
3NO₂(g) + H₂O(g) → 2 HNO₃ (g) + NO(g)
Qualitatively estimate the relative melting points for each of the solids, and rank them in decreasing order.
Rank from highest to lowest melting point. To rank items as equivalent, overlap them.
sodium chloride
graphite
solid ammonia
Answer:
Graphite> sodium chloride> solid ammonia
Explanation:
Melting points of solids has a lot to do with the nature of intermolecular forces in the solid. A substance melts when the intermolecular forces holding the crystal lattice has been overcome such that that the crystal structure of the solid just collapses.
Graphite consists of covalently bonded layers of carbon atom which form a giant lattice. The melting point of graphite is very high because of the fact that the strong covalent bonds that hold the carbon atoms together in the layers require a lot of heat energy to break. Grapoghite melts at about 3600°C
Sodium chloride is an ionic compound that melts at about 801°C. The lattice is composed of alternate sodium and chloride ions.
Solid ammonia is held together by much weaker intermolecular interaction hence it has a melting point of about −77.73 °C.
The equilibrium constant for the reaction is 1.1 x 106 M. HONO(aq) + CN-(aq) ⇋ HCN(aq) + ONO-(aq) This value indicates that
The given question is incomplete. The complete question is given here :
The equilibrium constant for the reaction is [tex]1.1\times 10^6[/tex] M.
[tex]HONO(aq)+CN^- (aq)\rightleftharpoons HCN(aq)+ONO^-(aq)[/tex]
This value indicates that
A. [tex]CN^-[/tex] is a stronger base than [tex]ONO^-[/tex]
B. HCN is a stronger acid than HONO
C. The conjugate base of HONO is [tex]ONO^-[/tex]
D. The conjugate acid of CN- is HCN
Answer: A. [tex]CN^-[/tex] is a stronger base than [tex]ONO^-[/tex]
Explanation:
Equilibrium constant is the ratio of product of the concentration of products to the product of concentration of reactants.
When [tex]K_{p}>1[/tex]; the reaction is product favoured.
When [tex]K_{p};<1[/tex] ; the reaction is reactant favored.
[tex]When K_{p}=1[/tex]; the reaction is in equilibrium.
As, [tex]K_p>>1[/tex], the reaction will be product favoured and as it is a acid base reaction where [tex]HONO[/tex] acts as acid by donating [tex]H^+[/tex] ions and [tex]CN^-[/tex] acts as base by accepting [tex]H^+[/tex]
Thus [tex]HONO[/tex] is a strong acid thus [tex]ONO^-[/tex] will be a weak conjugate base and [tex]CN^-[/tex] is a strong base which has weak [tex]HCN[/tex] conjugate acid.
Thus the high value of K indicates that [tex]CN^-[/tex] is a stronger base than [tex]ONO^-[/tex]
Considering that catalysts are not consumed in a reaction, how do you think increasing the amount of catalyst would affect the reaction rate for the decomposition of hydrogen peroxide?
a. increase
b. decrease
c. no effect
Answer:
a. increase
Explanation:
Catalysis is the process of increasing the rate of a chemical reaction by adding a substance known as a catalyst, which is not consumed in the catalyzed reaction.
By default, catalysts exists to speed up the rate of reactions. Increasing the amount of catalysts means that there would be an increase in the rate of reaction. The correct option is A.
Resonance Structures are ways to represent the bonding in a molecule or ion when a single Lewis structure fails to describe accurately the actual electronic structure. Equivalent resonance structures occur when there are identical patterns of bonding within the molecule or ion. The actual structure is a composite, or resonance hybrid, of the equivalent contributing structures. Draw Lewis structures for thecarbonate ion and for phosphine in which the central atom obeys the octet rule. ... How many equivalent Lewis structures are necessary to describe the bonding in CO32-
Answer:
See explanation
Explanation:
A Lewis structure is also called a dot electron structure. A Lewis structure represents all the valence electrons on atoms in a molecule as dots. Lewis structures can be used to represent molecules in which the central atom obeys the octet rule as well as molecules whose central atom does not obey the octet rule.
Sometimes, one Lewis structure does not suffice in explaining the observed properties of a given chemical specie. In this case, we evoke the idea that the actual structure of the chemical specie lies somewhere between a limited number of bonding extremes called resonance or canonical structures.
The canonical structure of the carbonate ion as well as the lewis structure of phosphine is shown in the image attached to this answer.
In a combustion chamber, ethane (C2H6) is burned at a rate of 8 kg/h with air that enters the combustion chamber at a rate of 176 kg/h. Determine the percentage of excess air used during this process.
Answer:
37%
Explanation:
From the question, the equation goes does.
C2H6+ (1-x)+a(O2+3.76N2)=bC02 + cH2O + axO2 + 3.76dN2.
Mair=Mair/Rin
( MN)O2 + (MN)N2÷ (MN)O2 + (MN)N2 +(MN)C2H6.
33 . 3.25(1-x) + 28 × 13.16(1-x) ÷ 33 × 3.25(1-x) + 28 × 13.16(1-x). + 30.1
= 176/176+8
X= 0.37
0.37 × 100
X= 37%
A civil engineer designs mostly:
A. building structures.
B. computer parts.
C. new foods.
D. technology that flies.
The decomposition of H2O2 is first order in H2O2 and the rate constant for this reaction is 1.63 x 10-4 s-1. How long will it take for [H2O2] to fall from 0.95 M to 0.33 M?
Answer:
It will take 6486.92 minutes for [H2O2] to fall from 0.95 M to 0.33 M
Explanation:
The order of reaction is defined as the sum of the powers of the concentration terms in the equation. Order of a reaction is given by the number of atoms or molecule whose concentration change during the reaction and determine the rate of reaction.
In first order reaction;
[tex]In \dfrac{a}{a_o-x}= k_1 t[/tex]
where;
a = concentration at time t
[tex]a_o[/tex] = initial concentration
and k = constant.
[tex]In (\dfrac{0.33}{0.95})= -1.63 \times 10^{-4} \times t[/tex]
[tex]-1.05736933 = -1.63 \times 10^{-4} \times t[/tex]
[tex]t = \dfrac{-1.05736933}{ -1.63 \times 10^{-4} }[/tex]
t = 6486.92 minutes
A 27.9 mL sample of 0.289 M dimethylamine, (CH3)2NH, is titrated with 0.286 M hydrobromic acid.
(1) Before the addition of any hydrobromic acid, the pH is___________.
(2) After adding 12.0 mL of hydrobromic acid, the pH is__________.
(3) At the titration midpoint, the pH is___________.
(4) At the equivalence point, the pH is________.
(5) After adding 45.1 mL of hydrobromic acid, the pH is_________.
Answer:
(1) Before the addition of any HBr, the pH is 12.02
(2) After adding 12.0 mL of HBr, the pH is 10.86
(3) At the titration midpoint, the pH is 10.73
(4) At the equivalence point, the pH is 5.79
(5) After adding 45.1 mL of HBr, the pH is 1.18
Explanation:
First of all, we have a weak base:
0 mL of HBr is added(CH₃)₂NH + H₂O ⇄ (CH₃)₂NH₂⁺ + OH⁻ Kb = 5.4×10⁻⁴
0.289 - x x x
Kb = x² / 0.289-x
Kb . 0.289 - Kbx - x²
1.56×10⁻⁴ - 5.4×10⁻⁴x - x²
After the quadratic equation is solved x = 0.01222 → [OH⁻]
- log [OH⁻] = pOH → 1.91
pH = 12.02 (14 - pOH)
After adding 12 mL of HBrWe determine the mmoles of H⁺, we add:
0.286 M . 12 mL = 3.432 mmol
We determine the mmoles of base⁻, we have
27.9 mL . 0.289 M = 8.0631 mmol
When the base, react to the protons, we have the protonated base plus water (neutralization reaction)
(CH₃)₂NH + H₃O⁺ ⇄ (CH₃)₂NH₂⁺ + H₂O
8.0631 mm 3.432 mm -
4.6311 mm 3.432 mm
We substract to the dimethylamine mmoles, the protons which are the same amount of protonated base.
[(CH₃)₂NH] → 4.6311 mm / Total volume (27.9 mL + 12 mL) = 0.116 M
[(CH₃)₂NH₂⁺] → 3.432 mm / 39.9 mL = 0.0860 M
We have just made a buffer.
pH = pKa + log (CH₃)₂NH / (CH₃)₂NH₂⁺
pH = 10.73 + log (0.116/0.0860) = 10.86
Equivalence pointmmoles of base = mmoles of acid
Let's find out the volume
0.289 M . 27.9 mL = 0.286 M . volume
volume in Eq. point = 28.2 mL
(CH₃)₂NH + H₃O⁺ ⇄ (CH₃)₂NH₂⁺ + H₂O
8.0631 mm 8.0631mm -
8.0631 mm
We do not have base and protons, we only have the conjugate acid
We calculate the new concentration:
mmoles of conjugated acid / Total volume (initial + eq. point)
[(CH₃)₂NH₂⁺] = 8.0631 mm /(27.9 mL + 28.2 mL) = 0.144 M
(CH₃)₂NH₂⁺ + H₂O ⇄ (CH₃)₂NH + H₃O⁻ Ka = 1.85×10⁻¹¹
0.144 - x x x
[H₃O⁺] = √ (Ka . 0.144) → 1.63×10⁻⁶ M
pH = - log [H₃O⁺] = 5.79
Titration midpoint (28.2 mL/2)This is the point where we add, the half of acid. (14.1 mL)
This is still a buffer area.
mmoles of H₃O⁺ = 4.0326 mmol (0.286M . 14.1mL)
mmoles of base = 8.0631 mmol - 4.0326 mmol
[(CH₃)₂NH] = 4.0305 mm / (27.9 mL + 14.1 mL) = 0.096 M
[(CH₃)₂NH₂⁺] = 4.0326 mm (27.9 mL + 14.1 mL) = 0.096 M
pH = pKa + log (0.096M / 0.096 M)
pH = 10.73 + log 1 = 10.73
Both concentrations are the same, so pH = pKa. This is the maximum buffering capacity.
When we add 45.1 mL of HBrmmoles of acid = 45.1 mL . 0.286 M = 12.8986 mmol
mmoles of base = 8.0631 mmoles
This is an excess of H⁺, so, the new [H⁺] = 12.8986 - 8.0631 / Total vol.
(CH₃)₂NH + H₃O⁺ ⇄ (CH₃)₂NH₂⁺ + H₂O
8.0631 mm 12.8986 mm -
- 4.8355 mm
[H₃O⁺] = 4.8355 mm / (27.9 ml + 45.1 ml)
[H₃O⁺] = 4.8355 mm / 73 mL → 0.0662 M
- log [H₃O⁺] = pH
- log 0.0662 = 1.18 → pH
Solid MgO has the same crystal structure as NaCl. How many oxide ions surround each Mg * ion as nearest neighbors in MgO? 4 none of these
Answer:
The number of oxide ions as the nearest neighbors of [tex]{\rm{M}}{{\rm{g}}^{{\rm{2 + }}}}[/tex] ions are known to be as six
Explanation:
The regularity of a crystal structure leads to the idea of space lattice.In order to explain this concept, let us consider a crystal of NaCl, It consists of a perfectly regular arrangement of sodium ions and chlorine ions.
If we represent the position of each Na+ in the crystal by a point marked x the result will be a regular three dimensional network of points. This will be the space lattice of Na+ in the crystal NaCl. The symmetry of the combined lattice determined the symmetry of the crystal as a whole.
The space lattice of a crystal may be considered as built up of a three dimensional basic pattern called unit cell. The unit cell is a repeat unit which generates the whole pattern in three dimensions of the unit cell.
In Solid MgO , the crystal structure which is used to predict the properties of the material, have the same structure as that of NaCl.
The obtain the structure of a face centered cubic FCC unit cell where the ions occupy the corner of the cube and the center of each face of the cube.
The number of oxide ions as the nearest neighbors of [tex]{\rm{M}}{{\rm{g}}^{{\rm{2 + }}}}[/tex] ions are known to be as six. As a result of that , the coordination number of [tex]{\rm{M}}{{\rm{g}}^{{\rm{2 + }}}}[/tex] ions is six.
A sample of an unknown gas effuses in 11.1 min. An equal volume of H2 in the same apparatus at the same temperature and pressure effuses in 2.42 min. What is the molar mass of the unknown gas
Answer:
Molar mass of the gas is 0.0961 g/mol
Explanation:
The effusion rate of an unknown gas = 11.1 min
rate of [tex]H_{2}[/tex] effusion = 2.42 min
molar mass of hydrogen = 1 x 2 = 2 g/m
molar mas of unknown gas = ?
From Graham's law of diffusion and effusion, the rate of effusion and diffusion is inversely proportional to the square root of its molar mass.
from
[tex]\frac{R_{g} }{R_{h} }[/tex] = [tex]\sqrt{\frac{M_{h} }{M_{g} } }[/tex]
where
[tex]R_{h}[/tex] = rate of effusion of hydrogen gas
[tex]R_{g}[/tex] = rate of effusion of unknown gas
[tex]M_{h}[/tex] = molar mass of H2 gas
[tex]M_{g}[/tex] = molar mass of unknown gas
substituting values, we have
[tex]\frac{11.1 }{2.42 }[/tex] = [tex]\sqrt{\frac{2 }{M_{g} } }[/tex]
4.587 = [tex]\sqrt{\frac{2 }{M_{g} } }[/tex]
[tex]\sqrt{M_{g} }[/tex] = [tex]\sqrt{2}[/tex]/4.587
[tex]\sqrt{M_{g} }[/tex] = 0.31
[tex]M_{g}[/tex] = [tex]0.31^{2}[/tex] = 0.0961 g/mol
The molar mass of the unknown gas will be "0.0961 g/mol".
Given:
Effusion rate of unknown gas,
[tex]R_g = 11.1 \ min[/tex]Effusion rate of [tex]H_2[/tex],
[tex]R_h = 2.42 \ min[/tex]Molar mass of hydrogen,
[tex]M_h = 1\times 2[/tex][tex]= 2 \ g/m[/tex]
According to the Graham's law, we get
→ [tex]\frac{R_g}{R_h} = \sqrt{\frac{M_h}{M_g} }[/tex]
By substituting the values, we get
→ [tex]\frac{11.1}{2.42} = \sqrt{\frac{2}{M_g} }[/tex]
→ [tex]4.587=\sqrt{\frac{2}{M_g} }[/tex]
→ [tex]\sqrt{M_g} = \sqrt{\frac{2}{4.587} }[/tex]
[tex]\sqrt{M_g} = 0.31[/tex]
[tex]M_g = 0.0961 \ g/mol[/tex]
Thus the above solution is right.
Learn more:
https://brainly.com/question/6019799
Classify each of these reactions.
1) Ba(ClO3)2(s)--->BaCl2(s)+3O2(g)
2) 2NaCl(aq)+K2S(aq)--->Na2S(aq)+2KCl(aq)
3) CaO(s)+CO2(g)--->CaCO3(s)
4) KOH(aq)+AgCl(aq)---->KCl(aq)+AgOH(s)
5) Ba(OH)2(aq)+2HNO2(aq)--->Ba(NO2)2(aq)+2H2O(l)
Each classify reaction should be either one of this.
a. acid-base neutralization
b. precipitation
c. redox
d. none of the above
Answer:
1. REDOX
2. None of the above
3. Precipitation
4. Preicipitation
5. Acid base neutralization
Explanation:
Reactions where a solid is formed, are named as precipitation. This solid is called precipitated.
Option 4 and 3.
3) CaO (s) + CO₂ (g) → CaCO₃(s)
4) KOH (aq) + AgCl (aq) → KCl (aq) + AgOH(s)
Reactions where water is produced, and you have an acid and a base as reactants, are named as neutralization. You called them acid-base because, the products.
5) Ba(OH)₂ (aq) + 2HNO₂(aq) → Ba(NO₂)₂ (aq) + 2H₂O(l)
Redox, are the reactions where one of the reactans can be oxidized and reduced, when a mole of electrons is released, or gained.
1) Ba(ClO₃)₂ (s) → BaCl₂ (s) + 3O₂(g)
Oxygen from the chlorate is oxidized (increases the oxidation state from -2 to 0) and the chlorine is reduced (decreases the oxidation state from +5 to -1).
2. 2NaCl(aq) + K₂S(aq) Na₂S (aq) + 2KCl (aq)
None of the above
When the owners of some wells in Pallerla started using high-powered motors to
draw water from the wells, the owners of other wells noticed that their wells were
drying up. Discuss the possible solution to the problem solutions to the problem
Answer:
The possible solution is to balance the rate of water removal from the well to the rate of natural recharge of the well from its underground aquifer.
Explanation:
A well is an excavation in the earth, made with the aim of extracting water from the aquifers. The water from a well can be drawn up by the means of a pump, containers, such as buckets, or by hand. Aquifers can also be recharged through a well.
Well draw down occurs when water from the well is drained faster than it is naturally recharged from the aquifer. This can be as a result of over pumping, extended drought, among other factors. The use of the high-powered motor in this case, for pumping, might be the possible cause of the well drying up. The situation might have resulted from the pump drawing out water from the well at a rate tat exceeds the rate at which it is recharged naturally, causing the well water to start drying up. There's also a possibility that the well is pumped indiscriminately, possibly leading to wastage of water.
The solution to this problem is to give the well a time duration for it to recharge itself. Then, the rate of recharges should be calculated and determined by an hydrologist. When all these is done, a pump with a motor power that does not exceed the calculated recharge rate should be used in place of the high-powered motor. Also, water usage should be brought to the minimum level to prevent unnecessary pumping due to excessive, wasteful use of water.
Consider Zn + 2HCl → ZnCl2 + H2 (g). If 0.30 mol Zn is added to HCl, how many mol H2 are produced?
Answer:
0.3 mol
Explanation:
Assuming HCl is in excess and Zn is the limiting reagent,
from the balanced equation, we can see the mole ratio of Zn:H2 = 1:1,
which means, each mole of zinc reacted gives 1 mole of H2.
So, if 0.30 mol Zn is added, the no. of moles of H2 produced will also be 0.3 mol, since the ratio is 1:1.
suppose you are titrating vinegar, which is an acetic acid solution
Answer:
0.373 M
Explanation:
The balanced equation for the reaction is given below:
HC2H3O2 + NaOH —> NaC2H3O2 + H2O
From the balanced equation above, the following were obtained:
Mole ratio of the acid, HC2H3O2 (nA) = 1
Mole ratio of the base, NaOH (nB) = 1
Next, we shall write out the data obtained from the question. This include:
Volume of base, NaOH (Vb) = 32.17 mL
Molarity of base, NaOH (Mb) = 0.116 M
Volume of acid, HC2H3O2 (Va) = 10 mL
Molarity of acid, HC2H3O2 (Ma) =..?
The molarity of the acid solution can be obtained as follow:
MaVa/MbVb = nA/nB
Ma x 10 / 0.116 x 32.17 = 1
Cross multiply
Ma x 10 = 0.116 x 32.17
Divide both side by 10
Ma = (0.116 x 32.17) /10
Ma = 0.373 M
Therefore, the concentration of the acetic acid is 0.373 M.
The displacement of a bromine atom by an amine is a substituion reaction. Write out the mechanism of this reaction (2-->3) Why might you expect that the reaction you have performed, using t-BuNH2, to be much slower than the same reaction using methylamine
Answer:
An alkyl halide can undergo SN2 reaction with an amine
Explanation:
The displacement of a bromine atom by an an amine (step 2---> 3) in the reaction sequence is an example of an SN2 reaction in which the amine is the nucleophile.
The nitrogen atom of the amine which bears a lone pair of electrons functions as the nucleophile and attacks the electrophilic carbon atom of the alkyl halide displacing the bromide and creating a new Carbon-Nitrogen bond. An ammonium intermediate is immediately formed and the reaction is completed by the abstraction of a hydrogen by a base (such as excess amine present in the system).
This reaction is slower with t-BuNH2 because of steric hindrance and steric crowding in the transition state. SN2 reactions are faster with methylamine where the alkyl carbon is easily accessible.
The detailed mechanism of this reaction has been attached to this answer.
The amount of space an object takes up is called _____. gravity weight mass volume
Write the net ionic equation for any precipitation reaction that may be predicted when aqueous solutions of manganese(II) nitrate and sodium hydroxide are combined.
Answer:
Explanation:
Mn( NO₃ )₂ + 2Na OH = Mn( OH)₂ (s) ↓ + 2Na NO₃
Converting into ions
Mn⁺ + 2 NO₃⁻ + 2 Na⁺ + 2 OH⁻ = Mn( OH)₂ + 2 Na⁻ + 2 NO₃⁻
Cancelling out common terms
Mn⁺ + 2 OH⁻ = Mn( OH)₂
this is net ionic equation required.
When alkanes react with chlorine in the presence of ultraviolet light, chlorine atoms substitute for one or more alkane hydrogen atoms. What is the number of different chloroalkane compounds that can be formed by the reaction of C2H6 with chlorine?
Answer:
6
Explanation:
Alkanes undergo substitution reaction so the number of replacement reaction hydrogen is 6
It takes 242. kJ/mol to break a chlorine-chlorine single bond. Calculate the maximum wavelength of light for which a chlorine-chlorine single bond could be broken by absorbing a single photon. Round your answer to 3 significant digits. single by absorbing a significant digit.
Answer:
495nm
Explanation:
The energy of a photon could be obtained by using:
E = hc / λ
Where E is energy of a photon, h is Planck's constant (6.626x10⁻³⁴Js), c is speed of the light (3x10⁸ms⁻¹) and λ is wavelength.
The energy to break 1 mole of Cl-Cl bonds is 242kJ = 242000J. The energy yo break a single bond is:
242000J/mol ₓ (1mol / 6.022x10²³bonds) = 4.0186x10⁻¹⁹J/bond.
Replacing in the equation:
E = hc / λ
4.0186x10⁻¹⁹J = 3x10⁸ms⁻¹ₓ6.626x10⁻³⁴Js / λ
λ = 4.946x10⁻⁷m
Is maximum wavelength of light that could break a Cl-Cl bond.
Usually, wavelength is given in nm (1x10⁻⁹m / 1nm). The wavelength in nm is:
4.946x10⁻⁷m ₓ (1nm / 1x10⁻⁹m) =
495nm