The theoretical yield of C₆H₅Cl if 91.2 g of C₆H₆ react in the reaction given is 131.287 g.
Theoretical yield is the amount of a product that results from the full conversion of the limiting reactant in a chemical reaction. You won't get the same quantity of product from a laboratory reaction as you would from a perfect (theoretical) chemical reaction. Grammes or moles are common units of measurement for theoretical yield.
The amount of product created by a reaction is known as the actual yield, as opposed to theoretical yield. Because of a later reaction producing additional product or because the recovered product contains impurities, an actual yield may be larger than a theoretical yield.
Write the balanced equation-
C₆H₆ + Cl2 ⇒ C₆H₅Cl + HCl
1 mol C₆H₆ reacts with 1 mole Cl₂ to yield 1 mole of C₆H₅Cl
Calculate the moles of each reactant-
91.2 g C₆H₆ / 78.1 g/mol = 1.167 mol C₆H₆
36.9 g Cl2 / 70.9 g/mol = 0.520 mol Cl₂
1.167 mole C₆H₆ requires 0.520 mole Cl₂. You have excess Cl₂ so C₆H₆ is limiting.
1.167 mole C₆H₆ will yiels (at 100%) 1.167 mole C₆H₅Cl
1.167 mol x 112.5 g/mol = 131.287 g C₆H₅Cl
Learn more about Theoretical yield;
https://brainly.com/question/30601900
#SPJ4
if the rate laws are expressed with (i) concentrations in moles per cubic decimetre, (ii) pressures in kilopascals, what are the units of a second-order and of a third-order rate constant?
(i) The units of a second-order rate constant are (mol⁻¹·dm³·s⁻¹).
(ii) The units of a third-order rate constant are (mol⁻²·dm⁶·s⁻¹).
(i) In a second-order rate law, the rate is proportional to the square of the concentration of a reactant or the product of the concentrations of two reactants. Since concentration is expressed in moles per cubic decimeter (dm³), the units of a second-order rate constant would be (mol⁻¹·dm³·s⁻¹). The exponent of -1 in moles accounts for the reciprocal of the concentration term, dm³ represents the volume unit, and s⁻¹ represents the time unit for the rate.
(ii) In a third-order rate law, the rate is proportional to the cube of the concentration of a reactant or the product of the concentrations of three reactants. Since concentration is expressed in moles per cubic decimeter (dm³), the units of a third-order rate constant would be (mol⁻²·dm⁶·s⁻¹). The exponent of -2 in moles accounts for the reciprocal of the squared concentration term, dm⁶ represents the volume unit raised to the power of three, and s⁻¹ represents the time unit for the rate.
To learn more about rate constant, here
https://brainly.com/question/20305922
#SPJ4
nittnium (nt) cations readily form coordination compounds. consider the compound: [nt(en)cl 2 ]br 2 . what is the charge on the central nittnium cation and the coordination number of this complex? (en
The given compound, [nt(en)Cl2]Br2, consists of a central niobium (nt) cation coordinated with two chlorides (Cl-) ions and two bidentate ethylenediamine (en) ligands, along with two bromides (Br-) ions as counter ions.
A compound is a substance that is made up of two or more different elements that are chemically bonded together. The atoms of each element combine to form a molecule with a unique chemical formula and structure. Compounds can be formed through a variety of chemical reactions, such as the combination of elements, oxidation-reduction reactions, and acid-base reactions. They can be either molecular compounds, where the elements are joined by covalent bonds, or ionic compounds, where the elements are joined by ionic bonds.
Compounds have unique physical and chemical properties that differ from the properties of their constituent elements. For example, water is a compound made up of hydrogen and oxygen, but it has properties that are different from those of hydrogen and oxygen individually. Compounds play an important role in many aspects of our daily lives, from the food we eat to the medicines we take to the materials we use to build structures.
To know more about Compound refer to-
brainly.com/question/14117795
#SPJ4
the k-40/ar-40 radioactive decay reaction has a half-life of 1.25 billion years. earth has an age of 4.54 billion years, which would be around 3.6 half-lives for this reaction. would it be possible to use this method to establish the age of a meteorite if the rocky material of that meteorite is as old as the earth - and why?
It would not be possible to use the K-40/Ar-40 radioactive decay method to establish the age of a meteorite if the rocky material of the meteorite is as old as the Earth.
The reason is that the K-40/Ar-40 decay system has a half-life of 1.25 billion years, which is significantly shorter than the age of the Earth (4.54 billion years). After 3.6 half-lives, the amount of K-40 remaining in the meteorite would be too small to accurately measure, making it unreliable for age determination.
The K-40/Ar-40 decay system is commonly used for dating rocks and minerals. The decay of K-40 into Ar-40 occurs over time, and by measuring the ratio of K-40 to Ar-40, the age of the sample can be estimated. However, since the half-life of K-40 is 1.25 billion years, after 3.6 half-lives (which corresponds to approximately 4.5 billion years), only a small fraction of the original K-40 would remain.
In order to use this method to establish the age of a meteorite that is as old as the Earth, there needs to be a sufficient amount of K-40 remaining in the sample. However, after 3.6 half-lives, the remaining K-40 would be too scarce to provide reliable age information.
Therefore, for dating purposes, other isotopic systems with longer half-lives are typically used for samples that are as old as or older than the Earth.
Learn more about radioactive decay here:
https://brainly.com/question/1770619
#SPJ11
which c5h10o isomer exhibits a strong infrared absorption band at 1717 cm-1?
The C₅H₁₀O isomer that exhibits a strong infrared absorption band at 1717 cm⁻¹ is the ketone isomer, 2-pentanone.
The absorption band corresponds to the stretching vibration of the carbonyl functional group (C=O). The C₅H₁₀O isomer that exhibits a strong infrared absorption band at 1717 cm-1 is the one containing a carbonyl group (C=O). The presence of a carbonyl group leads to strong absorption in the infrared region due to the stretching vibration of the C=O bond. This absorption usually occurs around 1700 cm-1. In this case, the isomer you are looking for is an aldehyde or a ketone. Among the C₅H₁₀O isomers, pentanal (an aldehyde) and 2-pentanone (a ketone) exhibit strong absorption bands at 1717 cm⁻¹ due to the presence of a carbonyl group.
Learn more about infrared absorption: https://brainly.com/question/31830158
#SPJ11
What volume of oxygen gas is needed for the complete combustion of 4.00 L of propane gas (C3H8)? Assume that pressure and temperat
The volume of oxygen gas, O₂ needed for the complete combustion of 4.00 L of propane gas (C₃H₈) is 20 liters
How do i determine the volume of oxygen gas, O₂ needed?First, we shall write the balanced equation for the reaction. This is given below:
C₃H₈(g) + 5O₂(g) → 3CO₂(g) + 4H₂O(g)
From the balanced equation above,
1 liters of C₃H₈ reacted with 5 liters of O₂
With the above information, we can obtain the volume of oxygen gas, O₂ needed to combust 4.00 L of propane gas, C₃H₈. This is shown below:
From the balanced equation above,
1 liters of C₃H₈ reacted with 5 liters of O₂
Therefore
4 liters of C₃H₈ will react = (4 liters × 5 liters) / 1 liters = 20 liters of O₂
Thus, from the above illustration, we can conclude that the volume of oxygen gas, O₂ needed is 20 liters
Learn more about volume:
https://brainly.com/question/9614052
#SPJ1
Complete question:
What volume of oxygen gas is needed for the complete combustion of 4.00 L of propane gas (C3H8)? Assume that pressure and temperature are constant
which of the molecules is rationally inactive? a) chcl3 b) co c) no d) co2
Answer:
CO2
Explanation:
CO2 is a nonpolar molecule with a symmetrical linear shape, which means it has no net dipole moment. As a result, it is relatively unreactive and does not readily participate in chemical reactions with other molecules.
in the malonic ester synthesis the enolate can attack the alkyl halide. what type of mechanism is this?
In the malonic ester synthesis the enolate can attack the alkyl halide. This is SN₂ mechanism. Sodio Malonic Ester can be alkylated using alkyl halides because it is an enolate.
After alkylation, the product can be saponified to create a dicarboxylic acid, and one of the carboxylic acids can then be eliminated using a decarboxylation process. Through a S N 2 reaction with alkyl halides, enolates can be alkylated in the alpha position.
An alkyl group takes the place of a -hydrogen during this reaction, creating a new C-C bond. SN₂ reactions continue to have their limitations. Tosylate, chloride, bromide, iodide, and other suitable primary or secondary leaving groups are preferred.
To learn more about Malonic Ester , click here.
https://brainly.com/question/30826889
#SPJ4
Excessive exposure to ultraviolet light can cause skin cancer and retinal damage. Damaging ultraviolet light has a wavelength of 1.5 m. Determine the frequency of UV light.
Ultraviolet (UV) light is a type of electromagnetic radiation that has shorter wavelengths than visible light. Therefore, the frequency of UV light with a wavelength of 1.5 m is 2.00 × [tex]10^1^4[/tex] Hz..
c = λf
Where: c = speed of light = 3.00 × [tex]10^8[/tex] m/s λ = wavelength = 1.5 × [tex]10^-^6[/tex] m (converted from 1.5 m to scientific notation) f = frequency
Substituting the values
3.00 × [tex]10^8[/tex]m/s = (1.5 × [tex]10^-^6[/tex] m) f
Solving for f:
f = (3.00 × [tex]10^8[/tex]m/s) / (1.5 × [tex]10^-^6[/tex] m)
f = 2.00 × [tex]10^1^4[/tex] Hz
The speed of light is a fundamental constant of nature and is represented by the symbol "c". In the formula, "λ" represents the wavelength of the light and "f" represents the frequency of the light.
Learn more about UV light here.
https://brainly.com/question/2273461
#SPJ1
in the lewis dot structure for phosphoric acid, h3po4, phosphorus and the oxygen without a hydrogen have formal charge of ___ and ___, respectively. assume that the octet rule is not violated.
In the Lewis dot structure for phosphoric acid, h3po4, phosphorus and the oxygen without a hydrogen have formal charge of +1 and -1, respectively, assuming that the octet rule is not violated.
This is because phosphorus in this structure has 5 valence electrons, and in order to achieve an octet, it forms 5 covalent bonds with the oxygen and hydrogen atoms. Each bond contributes 2 electrons to the shared pool, leaving one lone pair on each oxygen atom and none on the phosphorus atom, hence a formal charge of +1.
The oxygen atoms without hydrogen each have 6 electrons, one more than what they would have in a neutral state, hence a formal charge of -1.
The formal charge helps in determining the most stable Lewis dot structure for a molecule, and the structure with the lowest formal charges on each atom is usually the most stable.
Therefore, the Lewis dot structure for H3PO4 with a formal charge of +1 on the phosphorus and -1 on the oxygen atoms is the most stable configuration.
To know something about the formal charges, click below.
https://brainly.com/question/30459289
#SPJ11
Assume 100g of ethanol. Which process absorbs the highest amount of heat from its surroundings?A. Melting of solid ethanolB. Condensation of gaseous ethanol.C. Freezing of liquid ethanol.D. Deposition of gaseous ethanol(gas to solid transition)E. Evaporation of liquid ethanol
Based on your question, we'll compare the heat absorption of different phase transitions for 100g of ethanol.
The process that absorbs the highest amount of heat from its surroundings is E. Evaporation of liquid ethanol.
Evaporation, which is the transition from liquid to gas, requires a significant amount of energy to overcome intermolecular forces. This energy is absorbed from the surroundings as heat. For ethanol, the heat of vaporization is about 38.56 kJ/mol. Melting, condensation, freezing, and deposition also involve heat exchange, but their values are typically lower than the heat of vaporization.
In comparison, melting (A) and freezing (C) involve similar amounts of heat, but in opposite directions (absorbing heat for melting and releasing heat for freezing). Condensation (B) and deposition (D) are exothermic processes, meaning they release heat into the surroundings instead of absorbing it.
So, among the options provided, the evaporation of liquid ethanol absorbs the highest amount of heat from its surroundings.
To know something about the evaporation of liquid, click below.
https://brainly.com/question/9100231
#SPJ11
What is the approximate volume of gas in a 1.50 mol sample that exerts a pressure of 0.922 atm and temperature of 10.0°C? (show work)
Approximately 36.9 L of gas is in the 1.50 mol sample at 0.922 atm and 10.0°C.
To solve for the volume of gas, we can use the ideal gas law, which is expressed as PV = nRT, pressure is P, volume is V, number of mole is n, gas constant is R, and temperature in Kelvin is T. First, we need to convert the temperature to Kelvin by adding 273.15:
T = 10.0°C + 273.15 = 283.15 K
Then, we can rearrange the ideal gas law to solve for the volume:
V = (nRT) / P
V = (1.50 mol) x (0.0821 L·atm/mol·K) x (283.15 K) / (0.922 atm)
V ≈ 36.9 L
Therefore, approximately 36.9 L of gas is in the 1.50 mol sample at 0.922 atm and 10.0°C.
To know more ideal gas law, visit,
https://brainly.com/question/27870704
#SPJ1
Which of the following electronic configurations would represent an atom with the smallest electron affinity (smallest negative energy)?(A) ns2np1(B) ns2np2(C) ns2(D) ns2np4(E) ns2np5
The electronic configuration with the smallest electron affinity (smallest negative energy) would be (C) ns2, as it has a complete valence shell and would not readily accept an additional electron.
The other configurations have incomplete valence shells and would be more likely to accept an additional electron, resulting in a larger negative energy value for electron affinity.
The atom with the smallest electron affinity (smallest negative energy) would be represented by the electronic configuration (D) ns2np4. This is because an atom with this configuration has a relatively stable half-filled p subshell, making it less likely to accept an additional electron.
To know more about electronic configuration visit:
https://brainly.com/question/31812229
#SPJ11
A 10. 0 gram sample of water at 23. 0°C absorbs 209 joules of heat. What is the final temperature of the water sample? (c of water is 4. 18 J/g°C)
To determine the final temperature of the water sample, we can use the heat transfer equation:
q = m * c * ΔT
Where:
q is the heat absorbed (in joules),
m is the mass of the substance (in grams),
c is the specific heat capacity of the substance (in J/g°C),
ΔT is the change in temperature (in °C).
Given:
q = 209 J
m = 10.0 g
c (specific heat capacity of water) = 4.18 J/g°C
The initial temperature of the water sample = 23.0°C
We can rearrange the equation to solve for ΔT:
ΔT = q / (m * c)
Substituting the given values:
ΔT = 209 J / (10.0 g * 4.18 J/g°C)
ΔT ≈ 4.99°C
To find the final temperature, we add the change in temperature to the initial temperature:
Final temperature = Initial temperature + ΔT
Final temperature = 23.0°C + 4.99°C
Final temperature ≈ 27.99°C
Therefore, the final temperature of the water sample is approximately 27.99°C.
Learn more about heat transfer equation here:
https://brainly.com/question/30526730
#SPJ11
For ammonia, Kb is 1.8 x 10-5. to make a buffered solution of pH 10.0, the ratio of NH4Cl to NH3 must be: a) 1.8 : 1 b) 1 : 1.8 c) 0.18 : 1 d) 1 : 0.18 e) none of these
To make a buffered solution of pH 10.0 using ammonia (NH3) and its conjugate acid ammonium chloride (NH4Cl), the ratio of NH4Cl to NH3 should be 1 : 0.18 (option d).
In a buffered solution, the Henderson-Hasselbalch equation relates the pH, pKa (the negative logarithm of the acid dissociation constant), and the ratio of the concentrations of the conjugate acid and base. For ammonia, the pKa is related to the Kb (base dissociation constant) through the equation pKa + pKb = 14.
Given that Kb for ammonia is 1.8 x 10^-5, we can calculate the pKb as follows:
pKb = -log10(Kb) = -log10(1.8 x 10^-5) = 4.74
To achieve a pH of 10.0, we can use the Henderson-Hasselbalch equation:
pH = pKa + log10([NH4+]/[NH3])
Substituting the values, we have:
10.0 = 4.74 + log10([NH4+]/[NH3])
Rearranging the equation:
log10([NH4+]/[NH3]) = 10.0 - 4.74
log10([NH4+]/[NH3]) = 5.26
Taking the antilog of both sides:
[NH4+]/[NH3] = 10^5.26
[NH4+]/[NH3] ≈ 0.18
Therefore, the ratio of NH4Cl to NH3 in the buffered solution should be 1 : 0.18.
Know more about Buffered Solution here:
https://brainly.com/question/31428923
#SPJ11
what would be the concentratio of so4-2 when ag2so4 started to precipitate
The concentration of SO4-2 when Ag2SO4 starts to precipitate depends on the solubility product (Ksp) of Ag2SO4 and the initial concentration of Ag+ and SO4-2 ions in the solution.
The precipitation of Ag2SO4 occurs when the product of the concentrations of Ag+ and SO4-2 ions exceeds the solubility product constant of Ag2SO4. Therefore, the concentration of SO4-2 at the point where Ag2SO4 begins to precipitate can be calculated using the Ksp expression for Ag2SO4.
The solubility product constant (Ksp) for Ag2SO4 at 25°C is 1.4 × 10^-5. At the point of precipitation, the concentration of Ag+ and SO4-2 ions in the solution will be equal and can be represented by x. Therefore, the Ksp expression for Ag2SO4 becomes:
Ksp = [Ag+]^2[SO4-2] = (x)^2(x) = x^3
Since Ag2SO4 is a 1:1 electrolyte, the concentration of SO4-2 ions in the solution will be equal to the concentration of Ag+ ions, i.e., [SO4-2] = [Ag+] = x. Substituting this value in the Ksp expression, we get:
Ksp = x^3 = 1.4 × 10^-5
Solving for x, we get:
x = (1.4 × 10^-5)^(1/3) = 0.027 M
Therefore, the concentration of SO4-2 when Ag2SO4 starts to precipitate is 0.027 M.
The concentration of SO4-2 at the point where Ag2SO4 begins to precipitate can be calculated using the Ksp expression for Ag2SO4, which depends on the solubility product constant and the initial concentration of Ag+ and SO4-2 ions in the solution.
To know more about precipitation visit:
brainly.com/question/31198360
#SPJ11
which substance is the least soluble in h2o? (a) k2co3 (b) khco3 (c) ca(hco3)2 (d) caco
Of the options given, the least soluble substance in [tex]H_{2}O[/tex]is [tex]CaCO_{3}[/tex].
The correct option is (d) [tex]CaCO_{3}[/tex].
This is because [tex]CaCO_{3}[/tex].. is a sparingly soluble salt, meaning that only a small amount of it will dissolve in water. [tex]K_{2}CO_{3}[/tex] and [tex]KHCO_{3}[/tex] are both highly soluble in water, as they are both salts of strong bases and strong acids. [tex]Ca(HCO_{3})_{2}[/tex] is also relatively soluble in water, as it is a salt of a weak base [tex](Ca(OH)_{2} )[/tex] and a weak acid [tex](H_{2}CO_{3})[/tex] However, it is still more soluble than [tex]CaCO_{3}[/tex]. Solubility of a substance depends on several factors, including the nature of the solute and solvent, temperature, pressure, and concentration. Generally, the solubility of a substance increases with temperature and decreases with pressure, but this is not always the case. In summary, [tex]CaCO_{3}[/tex]. is the least soluble substance in [tex]H_{2}O[/tex] among the given options.
Learn more about soluble here:
https://brainly.com/question/29857840
#SPJ11
The complete question is:
which substance is the least soluble in [tex]H_{2}O[/tex]? (a) [tex]K_{2}CO_{3}[/tex] (b) [tex]KHCO_{3}[/tex] (c) [tex]Ca(HCO_{3})_{2}[/tex] (d) [tex]CaCO_{3}[/tex].
Be sure to answer all parts. For the titration of 10 mL of 0.15 M acetic acid with 0.1 M sodium hydroxide, determine the pH when: (a) 10 mL of base has been added. (b) 15 mL of base has been added. (c) 20.0 mL of base has been added.
(a) The pH when 10 mL of base has been added is approximately 4.74.
(b) The pH when 15 mL of base has been added is approximately 4.87.
(c) The pH when 20.0 mL of base has been added is approximately 4.94.
Titration is a technique used in analytical chemistry to determine the concentration of an unknown solution by reacting it with a known solution. In this case, we have a titration of acetic acid (a weak acid) with sodium hydroxide (a strong base).
Acetic acid (CH3COOH) is a weak acid that partially dissociates in water to release hydrogen ions (H+). Sodium hydroxide (NaOH) is a strong base that dissociates completely in water to produce hydroxide ions (OH-).
During the titration, as the base is added to the acid, the hydroxide ions react with the hydrogen ions from the acetic acid to form water. This neutralization reaction decreases the concentration of hydrogen ions, leading to an increase in pH.
To calculate the pH at different points of the titration, we need to consider the stoichiometry of the reaction and the initial concentrations of the acid and base. The Henderson-Hasselbalch equation is commonly used for weak acid-strong base titrations to determine the pH.
In this case, the initial concentration of acetic acid is 0.15 M, and the concentration of the sodium hydroxide solution is 0.1 M. By applying the Henderson-Hasselbalch equation and considering the volumes of acid and base added, we can calculate the pH at different stages of the titration.
The Henderson-Hasselbalch equation for this titration is:
pH = pKa + log([A-]/[HA])
where pKa is the dissociation constant of acetic acid, [A-] is the concentration of the acetate ion, and [HA] is the concentration of undissociated acetic acid.
In this case, since the volumes of acid and base added are equal, the pH at the halfway point (a) is equal to the pKa of acetic acid, which is approximately 4.74.
As more base is added, the concentration of the acetate ion increases, leading to a slightly higher pH. At 15 mL (b) and 20 mL (c) of base added, we can calculate the pH using the Henderson-Hasselbalch equation and find that it increases to approximately 4.87 and 4.94, respectively.
Learn more about Titration here:
https://brainly.com/question/31483031
#SPJ11
what type of isomers can the complex ion [cocl2(nh3)4] have?
The complex ion [CoCl2(NH3)4] can exhibit two types of isomers:
Geometric isomers: These isomers arise from differences in the spatial arrangement of ligands around the central metal ion. In the case of [CoCl2(NH3)4], there are two possible geometric isomers: cis and trans. The cis isomer has two NH3 ligands and two Cl ligands on the same side of the central Co atom, whereas the trans isomer has the NH3 and Cl ligands on opposite sides.
Optical isomers: These isomers arise from the presence of a chiral center in the complex ion, i.e. an atom with four different ligands attached to it. In [CoCl2(NH3)4], there are no chiral centers, so there are no optical isomers.
Therefore, the complex ion [CoCl2(NH3)4] can have two types of isomers: cis and trans geometric isomers.
Learn more about isomers here:
https://brainly.com/question/13422357
#SPJ11
which is the strongest reducing agent? h2(g) li(s) li (aq) fe(s)
Hydrogen gas (H2(g)) is the strongest reducing agent among the options given. This is because hydrogen has the lowest reduction potential, meaning it is able to donate electrons to other compounds more easily.
This is due to the fact that the H-H bond in hydrogen is relatively weak, allowing the hydrogen atom to easily detach from the molecule and form bonds with other compounds.
Lithium (Li(s)) is a reducing agent, but it is not as strong as hydrogen. This is because the Li-Li bond is relatively strong, making it more difficult for the lithium atom to detach from the molecule and form bonds with other compounds.
Lithium iodide (LiI(s)) is also a reducing agent, but it is not as strong as lithium. This is because the Li-I bond is relatively strong, making it more difficult for the lithium atom to detach from the molecule and form bonds with other compounds.
Ferricyanide (Fe(CN)6-3) is an oxidizing agent, not a reducing agent. It reacts with hydrogen gas to form iron and carbon monoxide.
To learn more about reducing agent, visit here:
brainly.com/question/12549467
#SPJ11
what will be the itnermediate color of bromothymol blue in a solution iof ph 7
The intermediate color of bromothymol blue in a solution with a pH of 7 is green. This indicates a neutral solution.
Bromothymol blue is a pH indicator that changes color depending on the acidity or alkalinity of a solution. In acidic solutions with a pH below 6, bromothymol blue appears yellow. In alkaline solutions with a pH above 7.6, it appears blue. However, when the pH is neutral, which is at a value of 7, the color of bromothymol blue is green. This color change is due to the presence of different ionized forms of the molecule in solutions with varying pH levels.
It is essential to note that the pH scale ranges from 0 to 14, with values below 7 representing acidic solutions, values above 7 representing alkaline solutions, and a value of 7 indicating a neutral solution. Thus, the intermediate color of bromothymol blue at pH 7 indicates neutrality.
To know more about bromothymol visit:
https://brainly.com/question/31251140
#SPJ11
nahco3(s) ⇌ naoh(s) co2(g) what is the free-energy change for this reaction at 298 k ? express the free energy in kilojoules to one decimal place.
The free-energy change for the reaction at 298 K is -94.7 kJ/mol.
The free-energy change for the reaction nahco3(s) ⇌ naoh(s) co2(g) at 298 K can be calculated using the following equation:
ΔG = ΔH - TΔS
where ΔH is the enthalpy change, T is the temperature in Kelvin, and ΔS is the entropy change.
To find the values for these parameters, we can refer to thermodynamic tables. The enthalpy change for the reaction is -52.3 kJ/mol, and the entropy change is 142.2 J/mol·K. Plugging these values into the equation, we get:
ΔG = -52.3 kJ/mol - (298 K)(0.1422 kJ/mol·K)
ΔG = -52.3 kJ/mol - 42.4 kJ/mol
ΔG = -94.7 kJ/mol
Therefore, the free-energy change for the reaction at 298 K is -94.7 kJ/mol.
Thus, we can use thermodynamic equations and tables to calculate the free-energy change for a chemical reaction. The enthalpy and entropy changes are important parameters that determine the overall feasibility of the reaction.
To know more about free-energy change, click here
https://brainly.com/question/31170437
#SPJ11
what type of substances are required for the production of illicit drugs?
The substances required for the production of illicit drugs vary depending on the type of drug being produced. For example, methamphetamine production typically involves the use of chemicals such as pseudoephedrine, anhydrous ammonia, and lithium, while cocaine production requires coca leaves and other chemicals like hydrochloric acid.
Other illicit drugs like heroin, ecstasy, and LSD also require specific substances for production. It is important to note that the production of illicit drugs is illegal and poses significant health and safety risks.
to know more about substances intake pls visit:
https://brainly.com/question/7482280
#SPJ11
A calorimeter holds 65 g water at 23.0°C. A sample of hot iron is added to the water, and the final temperature of the water and iron is 27.0°C. What is the change in enthalpy associated with the change in the water’s temperature?
Note: The specific heat of water is 4.18 j/g*C
The change in enthalpy of the reaction, given that a hot iron was added to 65 g water at 23.0°C until the final temperature of the water and iron became 27.0°C is 0.301 KJ/mol
How do i determine the change in enthalpy of the reaction?First, we shall obtain the mole of the water. This is shown below:
Mass of water = 65 gMolar mass of water = 18 g/molMole of water = ?Mole = mass / molar mass
Mole of water = 65 / 18
Mole of water = 3.61 moles
Next, we shall obtain the heat absorbed by the water. Details below:
Mass of water (M) = 65 gInitial temperature of water (T₁) = 23 °CFinal temperature of statue(T₂) = 27 °CChange in temperature (ΔT) = 27 - 23 = 4 °C Specific heat capacity of water (C) = 4.18 J/gºC Heat absorbed (Q) =?Q = MCΔT
Q = 65 × 4.18 × 4
Q = 1086.8 J
Finally, we shall determine the change in enthalpy of the reaction. Details below:
Heat absorbed (Q) = 1086.8 J = 1086.8 / 1000 = 1.0868 KJMole of water (n) = 3.61 molesChange in enthalpy (ΔH) =?Q = n × ΔH
1.0868 = 3.61 × ΔH
Divide both sides by 3.61
ΔH = 1.0868 / 3.61
ΔH = 0.301 KJ/mol
Thus, the change in enthalpy of reaction is 0.301 KJ/mol
Learn more about enthalpy change:
https://brainly.com/question/24170335
#SPJ1
when cooper wire is placed into at silver nitrate solution, silver crystal and cooper (ii) nitrate solution form. write the balanced chemical equation for the reaction. if a 20 g silver of cooper is used, determine the theoretical yield of silver. if 60 g silver is actually recovered from the reaction, determine the percent yield of the reaction.
The percent yield of the reaction is 30%.
The balanced chemical equation for the reaction between a cooper wire and a silver nitrate solution is:
[tex]2AgNO_3(aq) + 2Cu(s) - > 2Ag(s) + 2NO_3- (aq) + Cu(NO_3)_2(aq)[/tex]
In this reaction, the copper wire acts as the reducing agent, and the silver nitrate solution acts as the oxidizing agent. The silver from the copper wire is reduced to silver metal, and the silver nitrate is oxidized to silver ions.
The theoretical yield of silver can be calculated by using the stoichiometric coefficient of silver in the balanced equation:
Theoretical yield = (2 * moles Ag) / (moles Ag - moles Cu)
The theoretical yield of silver is 2 moles.
If 60 g of silver is actually recovered from the reaction, the percent yield of the reaction can be calculated by dividing the actual yield by the theoretical yield and multiplying by 100:
Percent yield = (60 / 2) * 100%
Percent yield = 30%
Therefore, the percent yield of the reaction is 30%.
Learn more about percent yield visit: brainly.com/question/11963853
#SPJ4
Which one is the correct order of reactivity of different types of alcohol towards hydrogen halide? .2° alcohol > 3 alcohol > 1° alcohol .1° alcohol > 2 alcohol > 3 alcohol .3° alcohol > 2° alcohol > 1° alcohol .2º alcohol > 1° alcohol > 3 alcohol .3° alcohol > 1° alcohol > 2º alcohol
The correct order of reactivity of different types of alcohol towards hydrogen halide is 3° alcohol > 2° alcohol > 1° alcohol.
When hydrogen halide is added to an alcohol, it undergoes an acid-base reaction, and the alcohol acts as a base. The order of reactivity depends on the stability of the carbocation intermediate that is formed during the reaction.
In the case of 3° alcohols, the carbocation intermediate formed is the most stable due to the presence of three alkyl groups that stabilize the positive charge. Hence, 3° alcohols are the most reactive towards hydrogen halide. On the other hand, 1° alcohols have the least stable carbocation intermediate, making them the least reactive towards hydrogen halide.
Therefore, the correct order of reactivity of different types of alcohol towards hydrogen halide is 3° alcohol > 2° alcohol > 1° alcohol.
T o learn more about hydrogen halide, visit here:
https://brainly.com/question/5504882
#SPJ11
when an octahedral metal complex is formed, which d orbitals are raised by the highest amount of energy as the incoming ligands approach the metal ion?
The magnitude of the crystal field splitting depends on the nature of the ligands and the metal ion, but in an octahedral complex, the eg set of d-orbitals is raised by the highest amount of energy as the incoming ligands approach the metal ion.
When an octahedral metal complex is formed, the incoming ligands approach the metal ion and interact with its d-orbitals, causing a splitting of the degenerate d-orbitals into two different energy levels. This process is known as crystal field splitting, and the energy difference between the two levels depends on the nature of the ligands and the metal ion.
In an octahedral complex, the d-orbitals are split into two sets: the eg set, which consists of the dxy, dxz, and dyz orbitals, and the t2g set, which consists of the dz2 and dx2-y2 orbitals. The eg orbitals are raised to a higher energy level than the t2g orbitals.
The reason for this lies in the geometry of the complex. The six ligands are arranged around the metal ion in an octahedral shape, with the four in the x-y plane (forming the equatorial plane) and the other two along the z-axis (forming the axial positions). The eg orbitals are oriented along the x, y, and z-axes and thus experience a stronger repulsion from the ligands in the equatorial plane, causing them to be raised to a higher energy level.
To learn more about crystal field
https://brainly.com/question/29389010
#SPJ4
for the following reaction assign the oxidation state to each atom and assign these reactions as either redox or nonredox 2al n2---> 2aln, 2no2----> n2o4, 2hbr mgo2---> mbr2 h2o2
Oxidation states of 2Al + N2 → 2AlN (Redox reaction) is, NO2 is oxidized to N2O4. 2NO2 → N2O4 2HBr + MgO2 → MgBr2 + H2O2 (Redox reaction) Oxidation states is MgBr2, and MgO2 is reduced to H2O2.
Oxidation states
2Al + N2 → 2AlN (Redox reaction)
Oxidation states:
Al = 0 (unchanged)
N = 0 (unchanged)
In AlN, Al = +3 and N = -3 (reduction)
2NO2 → N2O4 (Redox reaction)
Oxidation states:
N = +4 in NO2 and +4 in N2O4 (unchanged)
O = -2 in NO2 and -2 in N2O4 (unchanged)
In this reaction, NO2 is oxidized to N2O4.
2HBr + MgO2 → MgBr2 + H2O2 (Redox reaction)
Oxidation states:
H = +1 in HBr and -1 in H2O2 (changed)
Br = -1 in HBr and -1 in MgBr2 (unchanged)
Mg = +2 in MgO2 and +2 in MgBr2 (unchanged)
O = -2 in MgO2 and -1 in H2O2 (changed)
In this reaction, HBr is oxidized to MgBr2, and MgO2 is reduced to H2O2.
Learn more about(Redox reaction) here:
https://brainly.com/question/2671074
#SPJ11
A 5.25 gram sample of an unknown metal was placed in a water-bath at a temperature of 99.60 °C. Once the metal's temperature was the same as the water-bath, it was immediately transferred from the water-bath to a calorimeter containing 50.00 mL of distilled water at 11.25 °C. The final temperature of the water-metal mixture was 14.00 °C. Determine the specific heat of the unknown metal. Assume density the water is 1.000 grams/mL and the specific heat of water is 4.184 J/g °C
The specific heat of the unknown metal is approximately 1.22 J/g °C.
Given:
Mass of the metal (mmetal) = 5.25 g
Temperature change of the metal (ΔTmetal) = 14.00 °C - 99.60 °C = -85.60 °C
Mass of water (mwater) = 50.00 g
Specific heat of water (cwater) = 4.184 J/g °C
Temperature change of water (ΔTwater) = 14.00 °C - 11.25 °C = 2.75 °C
Using the equation:
mmetal × cmetal × ΔTmetal = -mwater × cwater × ΔTwater
We can rearrange the equation to solve for cmetal:
cmetal = (-mwater × cwater × ΔTwater) / (mmetal × ΔTmetal)
Substituting the given values:
cmetal = (-50.00 g × 4.184 J/g °C × 2.75 °C) / (5.25 g × (-85.60 °C))
Simplifying the expression:
cmetal = (-556.0 J) / (-454.20 J)
cmetal ≈ 1.22 J/g °C
Therefore, the specific heat of the unknown metal is approximately 1.22 J/g °C.
Know more about Specific Heat here:
https://brainly.com/question/31608647
#SPJ11
which product forms when 1-propyne is methylated (i.e., treated with sodium amide, followed by methyl iodide), then subjected to ozonolysis?
The product that forms when 1-propyne is methylated and subjected to ozonolysis is methylpropanal.
First, 1-propyne is treated with sodium amide, which is a strong base that deprotonates the alkyne to form the corresponding acetylide ion. the acetylide ion is methylated with methyl iodide to give the corresponding methylpropyne.
Finally, the methylpropyne is subjected to ozonolysis, which cleaves the carbon-carbon triple bond and forms two aldehydes. One of the aldehydes is methylpropanal, which is the product that you asked about.
Overall, this reaction pathway is a useful way to synthesize aldehydes from alkynes. it's worth noting that the reaction conditions (i.e., strong base, alkyl iodide, and ozone) can be hazardous and require careful handling.
To know more about ozonolysis visit :-
https://brainly.com/question/30325381
#SPJ11
Assuming ideal solution behavior, what is osmotic pressure of a solution of bovine insulin (molar mass, 5700 g mol−1) at 18 °C if 100.0 mL of the solution contains 0.103 g of the insulin?(a) Outline the steps necessary to answer the question.(b) Answer the question
Osmotic pressure is the pressure exerted by a solvent to prevent the flow of a solvent through a semipermeable membrane, caused by differences in solute concentrations between two solutions.
(a) Steps necessary to answer the question:
1. Convert the mass of insulin (0.103 g) to moles using its molar mass (5700 g/mol).
2. Convert the volume of the solution (100.0 mL) to liters (0.100 L).
3. Calculate the molarity of the solution by dividing the number of moles by the volume in liters.
4. Use the formula for osmotic pressure (π = MRT) to calculate the osmotic pressure.
- M is the molarity of the solution
- R is the ideal gas constant (8.314 J/(mol·K))
- T is the temperature in Kelvin (18 °C + 273.15).
(b) The osmotic pressure of the bovine insulin solution can be calculated by determining its molarity and using the formula π = MRT. After converting the mass of insulin to moles (0.103 g / 5700 g/mol = 1.807 × [tex]10^-5[/tex] mol) and the volume to liters (100.0 mL / 1000 = 0.100 L), the molarity of the solution is determined (1.807 × [tex]10^-5[/tex] mol / 0.100 L = 1.807 × [tex]10^-4 M[/tex]). By plugging in the values into the osmotic pressure formula (π = (1.807 × [tex]10^-4 M[/tex]) * (8.314 J/(mol·K)) * (18 °C + 273.15)), the osmotic pressure of the solution is calculated.
Learn more about osmotic pressure here:
https://brainly.com/question/29818006
#SPJ11