The reaction [tex]2NH_3=N_2H_4+H_2[/tex] has a standard reaction free energy of -62.4 kJ/mol.
What is energy?Energy is the capacity to carry out tasks or affect change. It comes in a variety of shapes and sizes, including kinetic energy (energy of motion), potential energy (stored energy of position), thermal energy (heat), electrical, chemical, and nuclear energy. Energy is required for the survival and growth of all living things. Additionally, it is necessary for the operation of industries and equipment.
Equation can be used to get a reaction's standard reaction free energy.
ΔG°rxn = ΣΔG°f (products) - ΣΔG°f (reactants).
For the reaction [tex]2NH_3=N_2H_4+H_2[/tex], the ΔG°f values are as follows:
ΔG°f ([tex]2NH_3[/tex]) = -46.2 kJ/mol
ΔG°f ([tex]N_2H_4[/tex]) = -20.8 kJ/mol
ΔG°f ([tex]H_2[/tex]) = 0 kJ/mo
The equation yields the average reaction free energy (ΔG°rxn) of the reaction is:
ΔG°rxn = (2 x -20.8) - (-46.2)
= -62.4 kJ/mol
To learn more about energy, visit:
brainly.com/question/29339318
#SPJ1
whats the answer and why?
I would say C
Since the nitro group (NO2) contains a positively charged nitrogen atom, it tends to attract electron from the aromatic ring and, therefore, the other group/atom. In the first case, I think piridine (II) makes a stronger bond with water since the nitrogen in the aromatic ring needs its electrons in order to be have a slight negative charge that can interact with the slightly positive charged hydrogen atom in water. If the nitro group is present, it will attract to some extent the electrons of the nitrogen atom in the ring, thus making the H-bond less stronger.
In the second case the hydrogen, which is slightly positive, of the OH group interacts with the oxygen, which is slightly negative, of water. If the nitro group is present, it will attract the electrons of oxygen of the hydroxyl group, therefore making the bond between the oxygen and the hydrogen more polar (which basically means that the bonding electron of hydrogen is even more attracted by the oxygen atom) making the hydrogen atom more positive, which means that the H-bond will be stronger
A sample with the phase diagram below starts at room temperature (25oC) and 1 atm. What phase change would the sample go through if it was cooled to 80 K?
a)Condensation (gas to liquid)
B)Fusion (solid to liquid)
C)Deposition (gas to solid)
D)Vaporization (liquid to gas)
E)Sublimation (solid to gas)
F)Freezing (liquid to solid)
Answer: C)Deposition (gas to solid)
Explanation: According to the phase diagram, at room temperature (25°C) and 1 atm, the sample is in the gas phase. As the temperature decreases to 80 K, it falls below the sublimation curve. T he sublimation curve represents the conditions at which a substance can change directly from a solid to a gas or from a gas to a solid without passing through the liquid phase.
Since the sample is in the gas phase at room temperature, cooling it to 80 K would cause it to go through the process of deposition, where the gas particles directly transform into a solid without first becoming a liquid. This is indicated by the section of the phase diagram below the sublimation curve.
CHALLENGE The circles below represent of the large circle, and multiply it by 30. That Earth and the moon. Measure the diameter would be the correct distance from Earth to the moon at this scale. Draw the two circles in the space provided. Use the correct distance you found.● = Earth ●=moon
To draw the two circles, we would need to draw a smaller circle with a diameter of 2,532.5 miles (representing the moon) and a larger circle with a diameter of 75,974.4 miles (representing the Earth) that is 30 times larger than the smaller circle.
What is the explanation for the above response?If we assume that the larger circle represents the Earth, then the diameter of the Earth would be 30 times the diameter of the smaller circle representing the moon. Let's say that the diameter of the smaller circle is x. Then the diameter of the larger circle (Earth) would be 30 times x or 30x.
To find the correct distance from Earth to the moon at this scale, we need to know the actual distance from Earth to the moon, which is approximately 238,855 miles or 384,400 kilometers. If we divide this distance by the scale factor of 30, we get:
238,855 miles / 30 = 7,961.8 miles
Therefore, the diameter of the smaller circle (moon) would be approximately 7,961.8 miles / π = 2,532.5 miles (rounded to one decimal place). And the diameter of the larger circle (Earth) would be 30 times that or 75,974.4 miles
So, to draw the two circles, we would need to draw a smaller circle with a diameter of 2,532.5 miles (representing the moon) and a larger circle with a diameter of 75,974.4 miles (representing the Earth) that is 30 times larger than the smaller circle.
Learn more about Earth at:
https://brainly.com/question/19581790
#SPJ1
The temperature of a 2.0-liter sample of helium gas at STP is increased to 27C, and the pressure is decreased to 80 kPa. What is the new volume of the helium sample? Round your answer to the nearest tenth of a liter?
The new volume of the helium sample would be 2.4 L.
Volume of a gasAccording to the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in kelvins.
At STP (standard temperature and pressure), which is defined as 0°C (273.15 K) and 101.325 kPa, the volume of 2.0 liters of helium gas contains one mole of helium atoms.
To find the new volume of the helium sample when the temperature is increased to 27°C (300.15 K) and the pressure is decreased to 80 kPa, we can use the following equation:
(P1V1)/T1 = (P2V2)/T2
where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2, V2, and T2 are the final pressure, volume, and temperature, respectively.
Plugging in the values, we get:
(101.325 kPa)(2.0 L)/(273.15 K) = (80 kPa)(V2)/(300.15 K)
Solving for V2, we get:
V2 = (101.325 kPa)(2.0 L)/(273.15 K) * (300.15 K)/(80 kPa) = 2.36 L
Therefore, the new volume of the helium sample is approximately 2.4 L (rounded to the nearest tenth).
More on gas laws can be found here: https://brainly.com/question/27009857
#SPJ1
Consider the reaction described by the chemical equation shown.
C2H4(g)+H2O(l)⟶C2H5OH(l)Δ∘rxn=−44.2 kJ
Use the data from the table of thermodynamic properties to calculate the value of Δ∘rxn
at 25.0 ∘C.
ΔS∘rxn= ? J⋅K−1
Calculate Δ∘rxn.
ΔG∘rxn= ? kJ
In which direction is the reaction, as written, spontaneous at 25 ∘C
and standard pressure?
reverse
both
neither
forward
Answer:
To calculate Δ∘rxn, we can use the following formula:
ΔG∘rxn = ΔH∘rxn - TΔS∘rxn
where ΔH∘rxn is the enthalpy change of the reaction, T is the temperature in Kelvin, and ΔS∘rxn is the entropy change of the reaction.
We know that ΔH∘rxn = -44.2 kJ and we want to find ΔS∘rxn at 25.0 ∘C (298 K). We can use the following formula to calculate ΔS∘rxn:
ΔG∘rxn = -RTlnK
where R is the gas constant (8.314 J/mol K), T is the temperature in Kelvin, and K is the equilibrium constant.
We can find K using the following formula:
ΔG∘rxn = -RTlnK K = e^(-ΔG∘rxn/RT)
We know that ΔG∘rxn = -44.2 kJ/mol and R = 8.314 J/mol K, so we can calculate K:
K = e^(-(-44.2 kJ/mol)/(8.314 J/mol K * 298 K)) K = 1.9 x 10^7
Now we can use K to calculate ΔS∘rxn:
ΔG∘rxn = -RTlnK ΔS∘rxn = -(ΔH∘rxn - ΔG∘rxn)/T ΔS∘rxn = -((-44.2 kJ/mol) - (-8.314 J/mol K * 298 K * ln(1.9 x 10^7)))/(298 K) ΔS∘rxn = -0.143 kJ/K
Therefore, ΔS∘rxn is -0.143 kJ/K.
To determine whether the reaction is spontaneous at 25 ∘C and standard pressure, we can use Gibbs free energy (ΔG). If ΔG < 0, then the reaction is spontaneous in the forward direction; if ΔG > 0, then it is spontaneous in the reverse direction; if ΔG = 0, then it is at equilibrium.
We know that ΔG∘rxn = -44.2 kJ/mol and T = 25 ∘C (298 K). We can use the following formula to calculate ΔG:
ΔG = ΔG∘ + RTlnQ
where Q is the reaction quotient.
At equilibrium, Q = K (the equilibrium constant). Since we calculated K earlier to be 1.9 x 10^7, we can use this value for Q.
ΔG = ΔG∘ + RTlnQ ΔG = (-44.2 kJ/mol) + (8.314 J/mol K * 298 K * ln(1.9 x 10^7)) ΔG = -43.6 kJ/mol
Since ΔG < 0, the reaction is spontaneous in the forward direction at 25 ∘C and standard pressure.
What is eutectic temperature
The eutectic point is the lowest temperature at which the liquid phase is constant at a particular pressure.
What does the word "eutectic" mean?A melting composition known as a eutectic consists of at least two components that melt and freeze at the same rates. The components combine during the crystallisation phase, operating as a single component as a result.
What are eutectic pressure and temperature?The eutectic is the system's lowest melting point under its own pressure; it has a matching temperature called the eutectic temperature and produces the eutectic liquid as a result. In terms of composition, eutectic liquids are located between the system's solid phases.
To know more about eutectic visit:-
https://brainly.com/question/27886492
#SPJ1
Select all the elementary substances.
silver bromide (AgBr)
silicon dioxide (SiO₂)
hydrogen sulfide (H₂S)
xenon (Xe)
Answer:
silicon dioxide,xenon
Explanation:
Question 4 of 10
How much energy is required to vaporize 2 kg of gold? Use
the table below and this equation: Q = mLvapor
Substance
Aluminum
Copper
Gold
Helium
Lead
Mercury
Water
Latent Heat
Fusion
(melting)
(kJ/kg)
400
207
62.8
5.2
24.5
11.4
335
Melting
Point
(°C)
660
1083
1063
-270
327
-39
0
Latent Heat
Vaporization
(boiling) (kJ/kg)
1100
4730
1720
21
871
296
2256
Boiling
Point
(°C)
2450
2566
2808
-269
1751
357
100
It requires 10.15 kilojoules of energy.
What is vaporization?The term "vaporisation" (or "evaporation") often refers to the transformation of a liquid's condition into a vapour phase below its boiling point. The phrase, however, can also refer to the process of removing a solvent, independent of the temperature used.
What is energy?When a body moves to exert force, it is said to be exerting work. Energy is the capacity to accomplish work. Energy is something we always need, and it can take many different forms.
If the gold is present in the liquid state, you only have to determine the latent heat of vaporization, or lvap. The empirical data for gold is 330 kJ/mol.
Q = mlvap
Q = (2 kg)(1 kmol/197 kg)(1,000 mol/1 kmol)
Q = 10.15 kJ
It needs an energy of 10.15 kilojoules
To know more about energy visit:
https://brainly.com/question/1932868
#SPJ1
At 25 ∘C
, the equilibrium partial pressures for the reaction
A(g)+2B(g)↽−−⇀C(g)+D(g)
were found to be A=5.63
atm, B=5.00
atm, C=5.47
atm, and D=5.63
atm.
What is the standard change in Gibbs free energy of this reaction at 25 ∘C
?
The standard change in Gibbs free energy of the reaction at 25 ∘C is -1.69 kJ/mol.
What is standard change?
To find the standard change in Gibbs free energy of the reaction, we need to use the following equation:
ΔG° = -RT ln(K)
where ΔG° is the standard change in Gibbs free energy, R is the gas constant (8.314 J/mol·K), T is the temperature in Kelvin (25 °C = 298 K), and K is the equilibrium constant.
To find K, we need to use the equilibrium partial pressures:
K = (PC × PD) / (PA × PB²)
where PA, PB, PC, and PD are the equilibrium partial pressures of A, B, C, and D, respectively.
Substituting the values, we get:
K = (5.47 atm × 5.63 atm) / (5.63 atm × (5.00 atm)²)
K = 0.6176
Now we can calculate the standard change in Gibbs free energy:
ΔG° = -RT ln(K)
ΔG° = -(8.314 J/mol·K) × (298 K) × ln(0.6176)
ΔG° = -1,690 J/mol or -1.69 kJ/mol
Therefore, the standard change in Gibbs free energy of the reaction at 25 ∘C is -1.69 kJ/mol.
What is free energy?
Free energy, also known as Gibbs free energy, is a thermodynamic quantity that represents the amount of energy in a system that is available to do work at a constant temperature and pressure. It is denoted by the symbol G and is expressed in units of joules (J) or calories (cal).
In simple terms, free energy is the energy that can be used to do work. It is defined by the equation:
ΔG = ΔH - TΔS
where ΔH is the change in enthalpy (heat content) of the system, ΔS is the change in entropy (disorder) of the system, and T is the absolute temperature in Kelvin.
If ΔG is negative, the reaction is spontaneous and can proceed without the input of external energy. If ΔG is positive, the reaction is non-spontaneous and requires energy input to proceed. If ΔG is zero, the system is at equilibrium.
To know more about free energy, visit:
https://brainly.com/question/14150518
#SPJ1
Your conclusion will include a summary of the lab results and an interpretation of the results.
Please answer all questions in complete sentences using your own words.
1. Identify the independent variable?
2. Identify the dependent variable?
3. Why do you believe knowing how elements and compounds react together is essential in
everyday matters?
I
4. Choose one of the compounds from the table and explain how you know the number of
atoms in your formula.
5. Is it possible for two different compounds to be made from the same two elements? Why
or why not?
6. With a limited number of elements (less than 120 are known), does this mean we also
have a small number of compounds? Or do we have many compounds in this world?
The independent and dependent variables are compounds and elements, respectively.
Why do you believe knowing how elements and compounds react together is essential in everyday matters?Elements and compounds make up everything in our surroundings. Knowing how things operate can aid in our ability to comprehend our surroundings.
Explain how you determined the number of atoms in your formula for one of the compounds in the table.Water is one of the chemicals listed in the table (H2O). This molecule has 3 atoms, which can be broken down into 2 hydrogen (H) atoms and 1 oxygen atom (O).
Can the same two elements be combined to form two distinct compounds? If not, why not?Several compounds can be created by mixing the same two elements' atoms in different ratios.
Does having a minimal number of known elements (less than 120) imply that there aren't many compounds as well? Or does this universe contain a lot of compounds?Because these elements mix in various ways and in various quantities to create unique compounds, we have a huge variety of compounds in this universe.
To learn more about chemical compounds visit:
brainly.com/question/12166462
#SPJ1
For a gaseous reaction, standard conditions are 298 K and a partial pressure of 1 atm for all species.
For the reaction
N2(g)+3H2(g)↽−−⇀2NH3(g)
the standard change in Gibbs free energy is Δ°=−32.8 kJ/mol
. What is ΔG for this reaction at 298 K when the partial pressures are N2=0.350 atm
, H2=0.300 atm
, and NH3=0.750 atm
?
If the volume of a gas at -40°C is double to 80 L what is the final temperature in degrees Celsius?
The final temperature is -160°C
To solve this problemWe can use the combined gas law, which relates the pressure, volume, and temperature of a gas:
(P₁V₁)/T₁ = (P₂V₂)/T₂
Where
P₁, V₁, and T₁ are the initial pressure, volume, and temperature of the gas, and P₂, V₂, and T₂ are the final pressure, volume, and temperature of the gasIn this case, we can assume that the pressure of the gas is constant, since it is not given in the problem statement. So we can simplify the equation to:
(V₁/T₁) = (V₂/T₂)
Where
V₁ and T₁ are the initial volume and temperature V₂ and T₂ are the final volume and temperatureWe are given that the initial volume (V₁) is 80 L and the final volume (V₂) is twice that, or 160 L. We are also given that the initial temperature (T₁) is -40°C. To find the final temperature (T₂), we can plug these values into the equation:
(V₁/T₁) = (V₂/T₂)
(80 L)/(-40°C) = (160 L)/T₂
Simplifying:
-2 L/°C = (160 L)/T₂
Multiplying both sides by -1°C/2 L (the reciprocal of -2 L/°C):
1/2 = (T₂)/(160 L) x (-1°C/2 L)
1/2 = -T₂/320
Multiplying both sides by -1 to isolate T₂:
-1/2 = T₂/320
T₂ = -160°C
Therefore, the final temperature is -160°C.
Learn more about combined gas law here : brainly.com/question/11296079
#SPJ1
Calcium nitrate reacts with ammonium fluoride to make calcium fluoride and ammonium nitrate. When (4.479x10^1) mL of (4.61x10^-1) M calcium nitrate was added to (7.332x10^1) mL of (1.5835x10^0) M ammonium fluoride, 0.731 grams of calcium fluoride were isolated. How many moles of ammonium fluoride were initially added in this experiment (not necessarily reacted)?
The moles of ammonium fluoride initially added in this experiment was 0.0216 moles.
What is mole?Mole is a unit of measurement that is used in chemistry to measure the amount of a substance. It is a very important unit of measurement because it allows chemists to accurately measure the amount of a substance that is being used in a reaction. The mole is defined as the amount of a substance that contains the same number of particles as there are atoms in 12 grams of carbon-12..
First, we need to calculate the moles of calcium nitrate in the solution. We can do this by using the molarity and volume of the solution:
(4.61x10⁻¹ M)*(4.479x10¹ mL) = 0.0216 moles of calcium nitrate
(0.731 g)*(1 mol/55.847 g) = 0.0131 moles of calcium fluoride
(0.0216 moles)*(1 mol/1 mol)
= 0.0216 moles of ammonium fluoride
Therefore, the moles of ammonium fluoride initially added in this experiment was 0.0216 moles.
To learn more about mole
https://brainly.com/question/29367909
#SPJ1
The volume of a sample of oxygen is 200.0 mL when the pressure is 3.000 atm and the temperature is 37.0 C. What is the new temperature if the volume increases to 400.0 mL and the pressure decreases to 2.000 atm?
Answer:
140.3 *C
Explanation:
(P1 * V1) / T1 = (P2 * V2) / T2
where P1 = 3.000 atm, V1 = 200.0 ml, T1 = 37.0°C + 273.15 = 310.15 K, P2 = 2.000 atm, V2 = 400.0 ml.
Substituting these values into the formula gives:
(3.000 atm * 200.0 ml) / 310.15 K = (2.000 atm * 400.0 ml) / T2
Solving for T2 gives:
T2 = (2.000 atm * 400.0 ml * 310.15 K) / (3.000 atm * 200.0 ml)
T2 ≈ 413 K or 140°C.
6. What is the pH of a 0.25 M solution of NH4Cl? [Kb(NH3) = 1.8 10–5
The Ammonium Chloride solution at 0.25 M has a pH of 2.67.
Why is the pH of Ammonium Chloride below 7?As a result, the weak basic (Chlorine) in the solution is overpowered by the conjugate acid (Ammonium cation), making the solution mildly acidic. According to the equation pH =log[Hydrogen ion], an acidic solution has a pH lower than 7. Aqueous ammonium chloride solution has a pH that is less than 7.
Ammonium cation + Water ⇌ Nitrogen trihydride + Hydronium ion
Kb = [Nitrogen trihydride][Hydronium ion] / [Ammonium cation]
[Nitrogen trihydride] = [Hydronium ion] = x
[Ammonium cation] = 0.25 - x
Kb = [Nitrogen trihydride][Hydronium ion] / [Ammonium cation]
1.8 × 10–5 = x² / (0.25 - x)
1.8 × 10–5 = x² / 0.25
x² = 4.5 × 10–6
x = 2.12 × 10–3
pH = -log[Hydronium ion] = -log(2.12 × 10–3) = 2.67
To know more about solution visit:-
https://brainly.com/question/30665317
#SPJ1
50 points +brainlist (there's going to be 3 more added on my profile with the same points(
which type of process is this?
chemical
physical
nuclear
nuclear type of process is this
Is the reaction physical or chemical?The content of a physical reaction differs from that of a chemical reaction. A chemical reaction changes the makeup of the substances in question; a physical change changes the look, smell, or plain presentation of a sample of matter without changing its content.
Nuclear reactions are not the same as chemical reactions. Atoms become more stable in chemical processes by engaging in electron transfers or by sharing electrons with other atoms.
learn more about Nuclear reactions
https://brainly.com/question/25387647
#SPJ1
im struggling
What quantity of heat (in kJ) would be required to convert 13.4 g of ice to water at 0.00 °C? (∆Hfus = 6.01 kJ/mol for water)
Around 80.5 KJ
Multiply Heat of Fusion and Mass to get the q value.
The combustion of 136 g of methane (CH₄) in the presence of excess oxygen gas produces 353 g of carbon dioxide. [CH₄ + 2O₂ --> CO₂ + 2H₂O; C = 12.01 g/mol, H = 1.01 g/mol, O = 16.0 g/mol]
What is the percent yield?
a.)
0.385
b.)
0.026
c.)
0.947
d.)
0.00946
Taking into account definition of percent yield, the correct answer is option c): the percent yield for the reaction is 0.947.
Reaction stoichiometryIn first place, the balanced reaction is:
CH₄ + 2 O₂ → CO₂ + 2 H₂O
By reaction stoichiometry, the following amounts of moles of each compound participate in the reaction:
CH₄: 1 moleO₂: 2 molesCO₂: 1 moleH₂O: 2 molesThe molar mass of the compounds is:
CH₄: 16.05 g/moleO₂: 32 g/moleCO₂: 44.01 g/moleH₂O: 18.02 g/moleBy reaction stoichiometry, the following mass quantities of each compound participate in the reaction:
CH₄: 1 mole ×16.05 g/mole= 16.05 gramsO₂: 2 moles ×32 g/mole= 64 gramsCO₂: 1 mole ×44.01 g/mole= 44.01 gramsH₂O: 2 moles×18.02 g/mole= 36.04 gramsMass of CO₂ formedThe following rule of three can be applied: if by reaction stoichiometry 16.05 grams of CH₄ form 44.01 grams of CO₂, 136 grams of CH₄ form how much mass of CO₂?
mass of CO₂= (136 grams of CH₄× 44.01 grams of CO₂)÷16.05 grams of CH₄
mass of CO₂= 372.92 grams
Then, 372.92 grams of CO₂ can be produced from 136 grams of CH₄.
Percent yieldThe percent yield is the ratio of the actual return to the theoretical return expressed as a percentage and this is calculated as the experimental yield divided by the theoretical yield multiplied by 100%:
percent yield= (actual yield÷ theoretical yield)× 100%
where the theoretical yield is the amount of product acquired through the complete conversion of all reagents in the final product.
Percent yield for the reaction in this caseIn this case, you know:
actual yield= 353 gramstheorical yield= 372.92 gramsReplacing in the definition of percent yield:
percent yield= (353 grams÷ 372.92 grams)× 100%
Solving:
percent yield= 94.7%= 0.947
Finally, the percent yield for the reaction is 0.947.
Learn more about percent yield:
brainly.com/question/14408642
#SPJ1
In the Periodic Table below, shade all the elements for which the neutral atom has an outer electron configuration of ms2nd2, where n and m are integers, and =m+n1.
The elements that have an outer electron configuration of ms2nd2 are located in the d-block of the periodic table and include some of the transition metals and lanthanides.
What is the periodic table?To determine which elements in the periodic table have this outer electron configuration, you can look at the position of the d-block elements in the table. The d-block elements are located in the middle of the table and include the transition metals. These elements have partially filled d orbitals, which can accommodate up to 10 electrons.
Elements in the d-block with an atomic number of 21 through 30 (scandium through zinc) have an outer electron configuration of d10s2 and do not fit the ms2nd2 configuration. However, elements in the d-block with an atomic number of 39 through 48 (yttrium through cadmium) have an outer electron configuration of d10s2p1 and can have the ms2nd2 configuration by removing the single electron in the p orbital. Elements in the d-block with an atomic number of 57 through 80 (lanthanum through mercury) also have the possibility of having an outer electron configuration of ms2nd2.
Learn more about periodic table:https://brainly.com/question/11155928
#SPJ1
Please help me
Define acid.
Mention four products of destructive distillation of coal.
In a tabular, highlight two differences between diamond and graphite.
List four types of salt.
Outline two physical properties of a base.
A mixture that contains large particles that are uniformly dispersed is called a _____.
solvent
emulsion
alloy
colloid
Answer:
colloid
Explanation:
there's no explanation
For the reaction: N₂(g) + 3H₂(g) + 2NH3(g) AH = -76.4 KJ/mol. Determine the heat energy when 5.0g of hydrogen burns.
Answer:
-191 kJ
Explanation:
The given reaction is:
N₂(g) + 3H₂(g) → 2NH₃(g) ΔH = -76.4 kJ/mol
From the balanced equation, we can see that the stoichiometric ratio between hydrogen (H₂) and ammonia (NH₃) is 3:2. This means that 3 moles of hydrogen react to produce 2 moles of ammonia.
To determine the heat energy when 5.0 g of hydrogen (H₂) burns, we need to follow these steps:
Step 1: Calculate the moles of hydrogen (H₂)
Using the molar mass of hydrogen (H₂), which is 2 g/mol, we can calculate the moles of hydrogen (H₂) in 5.0 g of hydrogen:
Moles of H₂ = Mass of H₂ / Molar mass of H₂
Moles of H₂ = 5.0 g / 2 g/mol
Moles of H₂ = 2.5 mol
Step 2: Use the stoichiometry of the reaction
Based on the stoichiometry of the reaction, we know that 3 moles of hydrogen (H₂) react to produce 2 moles of ammonia (NH₃), and the enthalpy change (ΔH) is -76.4 kJ/mol.
Step 3: Calculate the heat energy
The heat energy for 2.5 moles of hydrogen (H₂) can be calculated using the given enthalpy change (ΔH) and the stoichiometry of the reaction:
Heat energy = Moles of H₂ x ΔH
Heat energy = 2.5 mol x -76.4 kJ/mol
Heat energy = -191 kJ (rounded to three significant figures)
So, the heat energy when 5.0 g of hydrogen (H₂) burns is -191 kJ (rounded to three significant figures), and the negative sign indicates that the reaction is exothermic, releasing heat.
The Ka value for ethanoic acid, CH3COOH is 1.79 x 10-5. What is the pH of an equimolar solution of ethanoic acid and Na+CH3COO-?
The pH of the solution can be calculated using the following steps:
Write the chemical equation for the dissociation of ethanoic acid:
CH3COOH + H2O ⇌ CH3COO- + H3O+
Write the equilibrium expression for the dissociation of ethanoic acid:
Ka = [CH3COO-][H3O+] / [CH3COOH]
Since the solution is equimolar in CH3COOH and CH3COO-, we can assume that the initial concentrations of CH3COOH and CH3COO- are equal. Let's use the variable x to represent the concentration of CH3COO- and CH3COOH in mol/L.
[CH3COOH] = x mol/L [CH3COO-] = x mol/L
Since CH3COOH is a weak acid, we can assume that only a small fraction of it dissociates in water. Let's use the variable y to represent the concentration of H3O+ ions in mol/L that are produced from the dissociation of CH3COOH. From the dissociation of ethanoic acid, we know that [CH3COO-] = [H3O+].
[CH3COO-] = y mol/L [H3O+] = y mol/L
Use the equilibrium expression to solve for the concentration of H3O+ ions:
Ka = [CH3COO-][H3O+] / [CH3COOH] 1.79 x 10^-5 = y^2 / x
Solving for y in terms of x, we get:
y = sqrt(Ka * x)
Calculate the pH of the solution using the equation:
pH = -log[H3O+]
pH = -log(y)
Substituting in the value of y from Step 5, we get:
pH = -log(sqrt(Ka * x))
Simplifying, we get:
pH = -0.5 * log(Ka * x)
Substituting in the value of Ka, we get:
pH = -0.5 * log(1.79 x 10^-5 * x)
Now we can calculate the pH for the solution by substituting the value of x as it is equimolar.
pH = -0.5 * log(1.79 x 10^-5 * x)
pH = -0.5 * log(1.79 x 10^-5 * 1)
pH = -0.5 * log(1.79 x 10^-5)
pH = 4.74
Therefore, the pH of an equimolar solution of ethanoic acid and Na+CH3COO- is 4.74.
Calculate the concentrations of all species in a 0.510 M NaCH3COO (sodium acetate) solution. The ionization constant for acetic acid is a=1.8×10−5.
[Na+]=
[OH−]=
[H3O+]=
[CH3COO−]=
[CH3COOH]=
The concentrations of all species in a 0.510 M NaCH₃COO (sodium acetate) solution: [Na+]= 0.510 M , [OH-]= 1.8x10⁻⁵ M , [H₃O+]= 1.8x10⁻⁵ M , [CH₃COO-]= 0.510 M and [CH₃COOH]= 0.510 - (1.8x10⁻⁵) = 0.50982 M.
What is concentration?Concentration is the ability to focus your attention on a single task or thought for a prolonged period of time. It involves being able to ignore distractions and to be able to work through any difficulties or obstacles that may arise. Concentration is an important skill to master in order to achieve success in any endeavor, whether it be academic, professional, or personal. Good concentration can help you to stay focused, organized, and productive. When you are able to concentrate, you can take in the information needed to make better decisions and solve problems. Concentration is a skill that can be developed with practice, such as by setting goals, breaking down tasks into smaller, manageable pieces, and avoiding distractions.
To learn more about concentration
https://brainly.com/question/29330415
#SPJ1
Calculate the cell potential, Ecell, for the following reaction at 298k.
Co(s)+2Ag+(0.010M)=Co+2(0.015M)+2 Ag(s)
To calculate the cell potential, Ecell, for the given reaction at 298K, we need to use the Nernst equation. The Nernst equation relates the cell potential to the standard cell potential, temperature, and the concentrations of the reactants and products. The Nernst equation is given as follows:
Ecell = E°cell - (RT/nF) ln(Q)
where,
Ecell = cell potential
E°cell = standard cell potential
R = gas constant (8.314 J/K.mol)
T = temperature (298 K)
n = number of electrons transferred in the balanced redox reaction
F = Faraday constant (96,485 C/mol)
Q = reaction quotient
The given reaction is a redox reaction, which involves the transfer of two electrons from Co to Ag+. The balanced half-reactions are as follows:
Co(s) → Co2+(aq) + 2 e-
Ag+(aq) + e- → Ag(s)
The standard reduction potentials for these half-reactions are:
Co2+(aq) + 2 e- → Co(s) E°red = -0.28 V
Ag+(aq) + e- → Ag(s) E°red = +0.80 V
The overall standard cell potential can be calculated by subtracting the standard reduction potential of the anode from that of the cathode:
E°cell = E°red,cathode - E°red,anode
= +0.80 V - (-0.28 V)
= +1.08 V
Now we need to calculate the reaction quotient Q using the concentrations of the reactants and products. According to the given information, [Ag+] = 0.010 M and [Co2+] = 0.015 M.
Q = ([Co2+][Ag+]^2)/([Ag+]^2)
= ([0.015][0.010]^2)/([0.010]^2)
= 0.015 M
Substituting the values in the Nernst equation, we get:
Ecell = E°cell - (RT/nF) ln(Q)
= 1.08 - (8.314 x 298 / (2 x 96485)) ln(0.015)
= 0.829 V
Therefore, the cell potential, Ecell, for the given reaction at 298K is 0.829 V.
2. When dinitrogen pentoxide is heated, it decomposes to
nitrogen dioxide and oxygen. How many moles of nitrogen
dioxide can be formed from the decomposition of 1.25 g of
dinitrogen pentoxide?
0.02314 moles of NO₂ can be formed from the decomposition of 1.25 g of dinitrogen pentoxide.
The balanced equation for the decomposition of dinitrogen pentoxide is:
2 N₂O₅ → 4 NO₂ + O₂
The molar mass of N₂O₅ is 108.01 g/mol.
To determine the number of moles of N₂O₅ present in 1.25 g, we use the following calculation:
moles N₂O₅ = mass / molar mass
moles N₂O₅ = 1.25 g / 108.01 g/mol
moles N₂O₅ = 0.01157 mol
From the balanced equation, we can see that 2 moles of N₂O₅ decompose to form 4 moles of NO2. Therefore, the number of moles of NO2 produced can be calculated as:
moles NO₂ = (0.01157 mol N2O5) × (4 mol NO2 / 2 mol N2O5)
moles NO₂ = 0.02314 mol
Therefore, 0.02314 moles of NO₂ can be formed from the decomposition of 1.25 g of dinitrogen pentoxide.
learn more about moles here
https://brainly.com/question/29367909
#SPJ1
What does X represent for this transmutation? 9 4Be + 4₂He X+ ¹on ?
The result of the transformation, denoted by the symbol X, is 12 6C.
What does the radioactive decay symbol X stand for?The chemical symbol for the unstable nucleus, X, is represented by the nuclear equation, where the letter a stands for the particle's mass number and the letter b for the number of protons.
What is atom transmutation?the process of changing one chemical element into another. Since a transmutation involves a change to the atomic nuclei's structure, it can either be produced via a nuclear reaction (q.v. ), like neutron capture, or it can happen naturally due to radioactive decay, like alpha and beta decay (qq. v.).
To know more about nucleus visit:
https://brainly.com/question/14600198
#SPJ1
8. Balance the following equation:
NH3(g) + F2(g) → N₂F4(g) + HF(g)
a. How many moles of each reactant are needed to produce 4.00 moles of HF?
b. How many grams of F2 are required to react with 1.50 moles of NH3?
c. How many grams of N₂F4 can be produced when 3.40 grams of NH3 reacts?
Answer:
2NH₃(g) + 5F₂(g) → N₂F₄(g) + 6HF(g)
(a) mol of NH₃ required = 1.333 mol; mol of F₂ required = 3.333 mol
(b) mass of F₂ required = 142.5 g
(c) N₂F₄ produced = 10.38 g
Explanation:
2NH₃(g) + 5F₂(g) → N₂F₄(g) + 6HF(g)
What is Stoichiometry?
In chemical equations, unless stated otherwise, the reactants and products will theoretically always remain in stoichiometric ratios.
The stoichiometry of a reaction is the relationship between the relative quantities of products and reactants, typically a ratio of whole integers.
Consider the following chemical reaction: aA + bB ⇒ cC + dD.
The stoichiometry of reactants to products in this reaction is the ratio of the coefficients of each species: a : b : c : d.
Converting between moles and mass:
To convert from mass to moles, divide the mass present by the molar mass, resulting in the number of moles.
Thence, the formula for moles: n = m/M, where n = number of moles, m = mass present, and M = molar mass. This formula can be easily rearranged to find mass present from molar mass and moles, or molar mass from mass and moles.
a. How many moles of each reactant are needed to produce 4.00 moles of HF?
In the given chemical equation, the stoichiometry of the reaction is
2 : 5 : 1 : 6. Therefore, for every 2 moles of NH₃, we require 5 moles of F₂, which will produce 1 mole of N₂F₄ and 6 moles of HF.
mol of NH₃ required = 1/3 × mol of HF = 1.333 mol
mol of F₂ required = 5/6 × mol of HF = 3.333 mol
b. How many grams of F₂ are required to react with 1.50 moles of NH₃?
Using stoichiometry again: mol of F₂ required = 5/2 × mol of NH₃
∴ F₂ required = 3.75 mol.
Then we can convert this to mass: m = nM = (3.75)(2×19.00) = 142.5 g
c. How many grams of N₂F₄ can be produced when 3.40 grams of NH₃ reacts?
Converting mass to moles: n = m/M = 3.40/(14.01+1.008×3) = 0.1996 mol
Using stoichiometry again: mol of N₂F₄ produced = 1/2 × mol of NH₃
∴ N₂F₄ produced = 0.0998 mol
converting moles to mass: m = nM = (0.0998)(14.01×2+19.00×4)
∴ N₂F₄ produced = 10.38 g
Question 5(Multiple Choice Worth 3 points)
(07.02 LC)
The substances below are listed by increasing specific heat capacity value. Starting at 30.0 °C, they each absorb 100 kJ of thermal energy. Which one do you expect to increase in temperature the least?
a) Cadmium, 0.230 J/(g °C)
b) Sodium, 1.21 J/(g °C)
c) Water, 4.184 J/(g °C)
d) Hydrogen, 14.267 J/(g °C)
Component form of the vector v is as follows: 4 3 1.5 1 Using the standard basis vectors I and j), express the vector w as follows: 3 two 1 4 pp . 1 3 w 3.5 C. V plus w= d. Determine the vector v's magnitude
What does "vector" mean?
Latin word for "carrier" is "vector." Point A is transported to point B by vectors. The orientation of the vectors AB is the direction in which point A is moved in relation to point B, and the amplitude of the vector is the width of the line connecting the two locations A and B. The terms Euclidean vectors and spatial vectors are also used to refer to vectors.
A vector space is what?
A vector space, also known as a linear space, is a collection of things called vectors that can be added to and multiplied ("scaled") by figures called scalars in the fields of mathematics, physics, and engineering.
To know more about vector visit:
https://brainly.com/question/27854247
#SPJ1
Which sub atomic particles are similar in size
Answer:
Neutrons and Protons
Explanation:
Different elements can have subatomic particles of varying sizes. The size of an atom is defined by the size of its electron cloud, which is composed of electrons, and the size of its nucleus, which is composed of protons and neutrons. The atomic number and subsequently the identity of an element are determined by the number of protons in the nucleus. The quantity of protons and neutrons in the nucleus determines its size. The quantity of electrons in the electron cloud and the energy levels they are located at define its size. The size of atoms can differ depending on the element due to differences in the amount of protons, neutrons, and electrons.