Vinegar is an acid. Based on
what you know about the
properties of acids and bases,
which would you expect from
vinegar?
A. It should feel slippery.
B. It will release OH-in water.
C. It will release H+ in water.

This problem is providing describing a room in which air has a total pressure of 0.987 atm and the partial pressure of nitrogen is asked, turning out to be 0.746 atm.

In such a case, we can start by looking at the provided table, which shows the composition of dry air in mass basis, which means we must convert the composition of nitrogen to mole fraction by knowing that the average molar mass of air is 28.9647 g/mol, and thus, we infer that the mole fraction of nitrogen in air is about 0.755 according to:

[tex]x_{N_2}=\frac{0.781*14.0067g/mol*2}{28.9647g/mol} =0.755[/tex]

Then, we recall the Dalton's law version that relates total pressure, partial pressure and mole fraction written for nitrogen:

[tex]P_{N_2}=x_{N_2}P[/tex]

Finally, we plug in the previously calculated mole fraction and the total pressure of air to obtain:

[tex]P_{N_2}=0.755*0.987 atm\\\\P_{N_2}=0.746atm[/tex]

Learn more:

To keep burning, fires require oxygen. Carbon dioxide is used in certain fire extinguishers to put out flames. Explanation: Because magnesium is higher on the reactivity scale than carbon, it is more reactive and eliminates oxygen from carbon dioxide (to give carbon and magnesium oxide).

Explanation:

download the app topper

[tex]\rule{2000pt}{1000000pt}[/tex]

mamama

Answer:

21. D (Food moves into the small intestine.)

22. C (Food is stored and further broken down by acid and powerful enzymes.)

23. A (Your saliva helps break down what you're eating and turn it into chemicals called enzymes.)

24. B (...Food moves through your esophagus.)

25. E (Anything left in the small intestine moves into the large intestine.)

Explanation:

Food first enters the mouth where it is chewed and broken down by salivary amylase. Then, it is swallowed, moving down the esophagus to the stomach where it is stored and further broken down by acids and enzymes. And, these broken down food molecules moves into the large intestine.

Answer:

Our process will be to change the mass of NO2 to moles by dividing by the molar mass, and then we multiply the number of moles with Avogadro's number (6.02 x 10^23)

Molar mass of NO2 = (14) + (16)x2 = 46g/mol

45.8/46 = 0.99 or just 1 mole when you round it.

Now just multiply the moles with Avogadro's number

1 x (6.02 x 10^23)

= 6.02 x 10^23 molecules of NO2 reside in 45.8g of NO2

Answer:

the nature of the bond is covalent.

covalent bonds are bonds between 2 NON-METAL elements. since phosphorus and oxygen are both non-metals, the bond formed between them is covalent.

hope this answers your question!

Answer:

A solid has definite volume and definite shape, a gas has neither definite volume nor definite shape, and as said in the question, a liquid has a definite volume but no definite shape.

What this means is that even though liquid molecules can slide past each other and move to fill up the space they are in (this means that liquids have no definite shape), they keep their volume. That is, liquids have consistent, unchanging volume.

Hopefully that's helpful! :)

Answer:

the Answer is A B D

Explanation:

the cunduction in the spoons are equal to all the following answers

Conduction occurred more readily in the tin due to its lower specific heat capacity, Heat transfer via conduction occurred from the hot water to the spoons and then to the butter, The atoms in the tin spoon vibrated and collided at a greater rate thon those in the wood or plastic spoons. Thus option A,B, D are correct.

Specific heat can be measured as the quantity of heat required to increase the temperature of one gram of a substance by one degree Celsius.

The units of specific heat  are represented as calories or joules per gram per Celsius degree such as the specific heat of water is 1 calorie  per gram per Celsius degree

Specific heat capacity= Heat quantity/ mass × change in temperature.

If Q is the quantity of heat in joules, M is the mass of substance heated,

If ∆O is the change in temperature in Kelvin, Then Q= MC∆O, C is a constant called Specific heat capacity. Therefore, making C the subject of formula:

C= Q /M∆O

Thus option A,B, D are correct.

Learn more about specific heat, here:

https://brainly.com/question/15177263

#SPJ2

Answer:

2: 2.02 x 1024 atoms

3: 4.5201 atoms

4: 384 g/mol

Explanation: I'm in your class

Answer:

We know that 1 mole equals to 6.02 x 10^23 atoms (which is Avogadro's number), so to get to atoms from moles, you would divide the atoms of gold by Avogadro's number

(1.93 x 10^24) / (6.02 x 10^23)

= 3.2 mol of gold (rounded)

It measure the number of elementary entities of a given substance that are present in a given sample. Therefore, 3.21 moles of gold are in 1.93 x 10²⁴atoms of gold.

The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity of amount of substance. Mole is directly proportional to the given number of atoms.

Given number of atoms of gold= 1.93 x 10²⁴atoms

we know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number.

Mole of gold =given number of atoms of gold ÷ 6.022×10²³(Avogadro number)

Substituting all the given values, we get

Mole of gold = 1.93 x 10²⁴atoms ÷ 6.022×10²³(Avogadro number)

Moles of gold=3.21 moles of gold

Therefore, 3.21 moles of gold are in 1.93 x 10²⁴atoms of gold.

To know more about mole, here:

https://brainly.com/question/15209553

#SPJ2

Answer:

Liquids

Explanation:

They have a certain volume but they take the shape of their container

Typical examples of solutions are

A solution can be defined as a mixture (homogeneous) of two or more substances typically a solute in a solvent, the solvent is usually in greater quantity and the substance or substances present in lesser amounts are the solutes.

Common examples of solutions are  sugar in water and salt in water solutions, soda water,

Furthermore, solutions can be homogenous or heterogenous

Learn more about solutions here:

https://brainly.com/question/2626617

Answer:

A reactant is a substance that is present at the start of a chemical reaction. A product is a substance that is present at the end of a chemical reaction.

Explanation:

Answer:

cryogenic distillation process

Explanation:

Cryogenic distinction between carbohydrates and harmon process.

Its A. Explanation:I just know

Answer:

did u get the answer yet

Explanation:

Answer:

Technetium. It is only found in the stars.

Explanation:

Sorry, but thats all I could find for tou

The are many elements which are not present in human body. But almost all the discovered elements are there in the universe. But the one which is not present in earth and air is technetium

Technetium  is the first synthesized element by man in 1937. Technetium has no stable isotopes and it is not found in earth. But it is present in stars. However, rare earth elements such as promethium , francium etc. can be prepared or observed from uranium ores.

There are many elements especially  some actinides and lanthanides which are not present in earth naturally existence on starts and other planets.

Human body is made of various elements including carbon, oxygen, nitrogen, various metals like iron, zinc etc.  Various enzymes contains different elements but the number of elements which are in the surroundings of human and not inside is larger.

Therefore, all the discovered elements are found in the universe and some them are not present in earth.  

To find more about elements, refer the  link below:

https://brainly.com/question/24407115

#SPJ5

Answer:

Answer temperatures gram is correct because there is more of a mass of numbers and the numbers are higher. (don't really know this subject, just guessing, hope this helped.)

The substance A has higher solubility then substance B because the higher the temperature the easier the substance will dissolve.

The word solubility is defined as the ability of a substance, the solute, to form a solution with another substance, the solvent.

It can also be defined as a property that allow sugar molecule to dissolve.

It can be defined as at a given temperature, the amount of solute that can dissolve in a given amount of solvent.

In this reaction, increasing the pressure and temperature results in increased solubility. An increase in pressure causes more gas particles to enter the liquid, lowering the partial pressure.  

For exothermic reaction the temperature increases with decrease in solubility and for endothermic reaction the temperature decreases with increase in solubility.

Thus, the substance A has higher solubility then substance B because the higher the temperature the easier the substance will dissolve.

To learn more about solubility, refer to the link below:

https://brainly.com/question/8591226

#SPJ5

Answer: Two possible ways to show the structure of CH4 are its electron dot diagram or structural formula. CH4 or methane's molecular formula is given as CH4. The structural formula is a graphical representation of a chemical compound.

Answer:

using electron dot diagrams or structional formula

There are 5.01 × 10-⁷grams in 4.07 x 10¹⁵molecules of calcium hydroxide.

HOW TO CALCULATE MASS:

The mass of a substance can be calculated by multiplying the number of moles in the substance by its molecular mass.

However, given that the number of molecules in calcium hydroxide is 4.07 x 10¹⁵molecules, we need to calculate the number of moles in Ca(OH)2 as follows:

no. of moles of Ca(OH)2 = 4.07 x 10¹⁵ ÷ 6.02 × 10²³

no. of moles = 0.676 × 10-⁸

no. of moles = 6.76 × 10-⁹ moles.

Molar mass of Ca(OH)2 = 74.093 g/mol

Mass of Ca(OH)2 = 74.093 × 6.76 × 10-⁹ moles

Mass = 5.01 × 10-⁷grams.

Therefore, there are 5.01 × 10-⁷grams in 4.07 x 10¹⁵molecules of calcium hydroxide.

Learn more about how to calculate mass at: https://brainly.com/question/8101390?referrer=searchResults

Answer:

It's c

Explanation:

Because I've checked

Let's see

[tex]\\ \sf\longmapsto Hydrochloric\:acid=HCL[/tex]

[tex]\\ \sf\longmapsto Sulphuric\:acid=H_2SO_4[/tex]

[tex]\\ \sf\longmapsto Sodium\: Chloride=NaCl[/tex]

[tex]\\ \sf\longmapsto Glucose=C_6H_12O_6[/tex]

[tex]\\ \sf\longmapsto Methane=CH_4[/tex]

.

Answer:

the molecular formulae of the following compounds are:

Hydrochloric acid: HCl

Sulphuric  acid:[tex]H_2SO_4[/tex]

sodium chloride: NaCl

glucose:[tex]C_6H_{12}O_6[/tex]

methane:[tex]CH_4[/tex]

Explanation:

Answer:

The lack of accuracy and underestimation of absorbance readings obtained from the colorimeter can be contributed to many experimental factors. One plausible error is from the imperfection of the absorber, in that it may not completely absorb the stray light passing by the perimeters of the photoresistor.

Explanation:

In practice there are other sources of error, such as environmental effects on photometer and sample, temperature, line voltage fluctuations, vibrations, contamination, or heating of the sample by the photometer. All these factors may impair the measured result, and ways and means are known to test and eliminate them.

Answer: D. 10,000 km = Exosphere; 690 km = Thermosphere; 85 km Mesosphere; 50 km = Stratosphere; 20 km = Troposphere

2. True

3. True

4. True

5. True

Answer:

Ye? everything is made up of atoms so sure