we can form standing waves on a rope attached to a wall by moving the opposite end of the rope up and down at an appropriate frequency. where does the second wave come from that interferes with the initial wave to form a standing wave?

The next step in the formation of metamorphic rocks is beast described by

The process of contact metamorphism s where rocks that are in contact with magma experience high temperatures and undergo changes in mineralogy due to the heat.

This can result in the formation of new minerals or the recrystallization of existing ones

Overall the process of metamorphism can occur due to different types of metamorphic agents including heat, pressure and chemically active fluids which can change the rocks mineralogy and texture, leading to the formation of metamorphic rocks

Learn more about metamorphic rocks at

https://brainly.com/question/20475194

#SPJ1

The  magnitude of the angular acceleration of the wheel is 10.9 rad/s^2.

the wheel takes 2.02 seconds to come to stop from an initial angular velocity of 22.0 rad/s.

(a) We can use the formula for angular acceleration:

angular acceleration = (final angular velocity - initial angular velocity) / time taken

We are given the initial and final angular velocities, and the angle through which the wheel rotates. We need to find the time taken to slow down.

The circumference of the wheel is:

circumference = π × diameter = π × 0.345 m = 1.081 m

The distance traveled during the angular displacement of 13.8 rad is:

distance = 1.081 m × 13.8 = 14.92 m

The average angular velocity during the slowing down period is:

average angular velocity = (22.0 rad/s + 13.5 rad/s) / 2 = 17.75 rad/s

The time taken to slow down can be found using the formula:

time taken = angle of rotation / average angular velocity

time taken = 13.8 rad / 17.75 rad/s = 0.778 seconds

Therefore, the time taken to slow down is 0.778 seconds.

The angular acceleration can be found using the formula:

angular acceleration = (final angular velocity - initial angular velocity) / time taken

angular acceleration = (13.5 rad/s - 22.0 rad/s) / 0.778 s = -10.9 rad/s^2

Therefore, the magnitude of the angular acceleration of the wheel is 10.9 rad/s^2.

(b) To find the time taken to come to stop from an initial angular velocity of 22.0 rad/s, we can use the formula:

time taken = initial angular velocity / angular acceleration

time taken = 22.0 rad/s / 10.9 rad/s^2 = 2.02 seconds

Therefore, the wheel takes 2.02 seconds to come to stop from an initial angular velocity of 22.0 rad/s.

Visit to know more about Angular velocity:-

brainly.com/question/29342095
#SPJ11

The spring constant k is approximately 330 N/m, and the length of the spring when a 3.0 kg mass is suspended from it is approximately 0.17 m.

To find the spring constant k, we can use Hooke's Law, which states that F = kx.

In this case, F is the force exerted by the 1.7 kg mass (F = mg) and x is the change in the spring's length (∆L = 13 cm - 8 cm = 5 cm).

1. Calculate the force:

F = mg = (1.7 kg)(9.81 m/s²) = 16.677 N.

2. Convert x to meters:

x = 5 cm * 0.01 m/cm = 0.05 m.

3. Rearrange Hooke's Law to find k:

k = F/x = 16.677 N / 0.05 m = 333.54 N/m ≈ 330 N/m (to two significant figures).

Now, to find the length of the spring with a 3.0 kg mass:

1. Calculate the new force:

F_new = m_new * g = (3.0 kg)(9.81 m/s²) = 29.43 N.

2. Rearrange Hooke's Law to find the new change in length:

x_new = F_new / k = 29.43 N / 330 N/m = 0.0892 m.

3. Add the new change in length to the original length:

L_new = 0.08 m + 0.0892

m = 0.1692

m ≈ 0.17 m (to two significant figures).

Learn more about Hooke's law at https://brainly.com/question/8812716

#SP

a) The de Broglie wavelength of a non relativistic free particle with mass m and kinetic energy K is given by λ = [tex]\frac{h}{\sqrt{2mK} }[/tex] , where h is the Planck constant.

b) For an 800-eV electron, the de Broglie wavelength is approximately 1.23 angstroms.

The de Broglie wavelength (λ) of a particle is related to its momentum (p) by the equation λ = [tex]\frac{h}{p}[/tex], where h is the Planck constant.

For a non relativistic free particle with mass m and velocity v, the momentum is given by p = mv, and the kinetic energy K = [tex]\frac{1}{2}[/tex][tex]mv^{2}[/tex]

Substituting p = mv into the equation for λ gives λ = h/mv. Solving for v in terms of K, we get v =  [tex]\sqrt\frac{2K}{m}[/tex]. Substituting this expression for v into the equation for λ gives λ = [tex]\frac{h}{\sqrt{2mK} }[/tex]

For an 800-eV electron, we have K = 800 eV and m = 9.11 x [tex]10^{-31}[/tex]kg         (the mass of an electron).

Substituting these values into the expression for λ gives λ = 1.23 angstroms. Therefore, the de Broglie wavelength of an 800-eV electron is approximately 1.23 angstroms.

Learn more about De Broglie wavelength here:

https://brainly.com/question/30404168

#SPJ11

Assuming the angular resolution found for the Hubble Telescope in Example 27.5, the smallest detail that could be observed on the Moon can be calculated using the following formula:
Angular resolution is a measure of the ability of an optical instrument, such as a telescope or microscope, to distinguish between two closely spaced objects or details in an image. It is determined by the size of the aperture or lens, the wavelength of the light being observed, and the quality of the optics.

The angular resolution of an instrument is usually given in units of arcseconds, which is a measure of angle. It represents the smallest angular separation between two point sources that can be resolved by the instrument. The smaller the angular resolution, the higher the instrument's resolving power.

For example, the angular resolution of the Hubble Space Telescope is about 0.05 arcseconds, which means that it can distinguish between two objects that are separated by a distance of 0.05 arcseconds or more. This high angular resolution allows the Hubble to capture detailed images of distant galaxies and other celestial objects.

In general, the angular resolution of an instrument can be improved by increasing the size of the aperture or lens, using shorter wavelengths of light, and improving the quality of the optics. However, there are physical limits to how much the resolution can be improved, based on the fundamental properties of light and the laws of diffraction.
Smallest detail = (Angular resolution) × (Distance to the Moon) / (206,265)

Given the angular resolution of the Hubble Telescope is 0.1 arcseconds (from Example 27.5), and the average distance to the Moon is 384,400 km, we can plug these values into the formula:

Smallest detail = (0.1) × (384,400,000 m) / (206,265)

Smallest detail ≈ 186.5 meters

Therefore, the smallest detail that could be observed on the Moon with the Hubble Telescope is approximately 186.5 meters.

To know more about angular resolution visit:

https://brainly.com/question/31858807

#SPJ11

The magnitude of the velocity of the bob after the pendulum has been in motion for 1.75 s is 3.25 ft/s. The magnitude of the acceleration of the bob after the pendulum has been in motion for 1.75 s is 33.6 ft/s2.

To determine the magnitudes of the velocity and acceleration of the bob of a simple pendulum after it has been in motion for 1.75 s, we need to use the equations of motion for a simple harmonic oscillator. The general equation for the position of a simple pendulum is given by:

θ(t) = θ0 cos(ωt + φ)

where θ0 is the amplitude of the oscillation, ω is the angular frequency, t is time, and φ is the phase constant.

In this case, we know that the pendulum is released from rest at an angle of 5°, which means that θ0 = 5°. We also know that the length of the pendulum is 40 inches, so we can use the formula for the period of a simple pendulum to find the value of ω:

T = 2π√(l/g)

where T is the period, g is the acceleration due to gravity (32.2 ft/s2), and l is the length of the pendulum. Substituting the given values, we get:

T = 2π√(40/32.2) = 2.14 s

Therefore, the angular frequency is:

ω = 2π/T = 2.94 rad/s

Now we can use the equation for the velocity of the bob at any time t:

v(t) = -ωθ0 sin(ωt + φ)

To find the velocity after 1.75 s, we need to find the value of the phase constant φ. Since the pendulum is released from rest, we know that the velocity is initially zero, which means that φ = 0. Substituting the given values, we get:

v(1.75) = -2.94(5/180) sin(2.94(1.75)) = -3.25 ft/s

Therefore, the magnitude of the velocity of the bob after the pendulum has been in motion for 1.75 s is 3.25 ft/s.

Next, we can use the equation for the acceleration of the bob at any time t:

a(t) = -ω2θ0 cos(ωt + φ)

Substituting the given values, we get:

a(1.75) = -2.942(5/180) cos(2.94(1.75)) = -33.6 ft/s2

Therefore, the magnitude of the acceleration of the bob after the pendulum has been in motion for 1.75 s is 33.6 ft/s2.

The negative sign in the equations for the velocity and acceleration indicates that the bob is moving in the opposite direction of the initial displacement (i.e., towards the equilibrium position). This is because the bob of a simple pendulum oscillates back and forth around the equilibrium position, with the displacement, velocity, and acceleration changing direction at the endpoints of each swing.

To know more about velocity, please click on:

https://brainly.com/question/18836495

#SPJ11

Assuming the laser beam is perfectly vertically polarized, the polarizing filter will only allow light polarized in the same direction as its axis to pass through. Therefore, the laser beam's power will be reduced by a factor of $\cos^2 \theta$, where $\theta$ is the angle between the filter's axis and the vertical.

Given that the filter's axis is 34 degrees from horizontal, it is also 56 degrees from vertical. Thus, $\theta = 56^\circ$.

The power of the laser beam as it emerges from the filter is:

$P_{out} = P_{in} \cos^2 \theta$

where $P_{in}$ is the initial power of the laser beam.

Substituting the given values, we get:

$P_{out} = (210,\text{mW}) \cos^2 56^\circ \approx 86.5,\text{mW}$

Therefore, the power of the laser beam as it emerges from the filter is approximately 86.5 mW.

To know more about laser beam click this link -

brainly.com/question/4218151

#SPJ11

Explanation:

socks up his told was to pull he

Yes, touching the metal ball of a charged electroscope with your finger will cause the electroscope to discharge. This can be explained by the process of grounding.

An electroscope is a device used to detect the presence of electric charge. It consists of a metal rod or stem with a metal ball or leaves at the top. When the electroscope is charged, either positively or negatively, the metal ball or leaves acquire the same charge.

When you touch the metal ball of the charged electroscope with your finger, which is a conductive material, you provide a path for the excess charge to flow through your body. This process is known as grounding or earthing.

As you touch the metal ball, electrons from your body can flow onto or from the electroscope, depending on the charge of the electroscope. If the electroscope is positively charged, electrons from your body will flow onto the electroscope, neutralizing the positive charge. Similarly, if the electroscope is negatively charged, electrons will flow from the electroscope to your body, neutralizing the negative charge.

By providing a conductive path, touching the electroscope with your finger allows for the redistribution of charge, ultimately resulting in the electroscope discharging. The metal ball of the electroscope becomes neutral, and any divergence of the leaves returns to their normal position.

This discharge occurs because electrons, which are negatively charged particles, move in response to the potential difference between your body and the electroscope. The excess charge on the electroscope seeks to balance itself with the charge in your body, effectively neutralizing the electroscope.

Therefore, by touching the metal ball of a charged electroscope with your finger, you provide a pathway for the charge to flow, leading to the discharge of the electroscope.

To know more about electroscope, please click on:

https://brainly.com/question/31600722

#SPJ11

The distance from the object to the lens should be 2u/3 = 2/3 times the focal length of the lens, or 2/3 * 17 cm = 2 * 5.87 cm = 11.74 cm.

To project the image of an object 3 times its actual size onto a screen using a lens of focal length 17 cm, we can use the following formula:

u = -v

where u is the distance from the object to the lens, and v is the distance from the lens to the screen.

The formula for image formation with a lens is:

1/v = 1/u + 1/f

where f is the focal length of the lens.

Substituting u = -v and plugging in the given values, we get:

1/v = 1/(-v) + 1/f

Simplifying this expression, we get:

1/v = -1/f - 2

v = -f/2

Substituting this expression for v in the formula for image formation, we get:

1/(-f/2) = 1/u + 1/f

Solving for u, we get:

u = -f/2

Substituting this expression for u in the formula for image formation, we get:

1/(-f/2) = 1/(-f/2) + 1/f

Solving for f, we get:

f = -2u

Substituting this expression for f in the formula for image formation, we get:

1/(-f/2) = 1/(-2u) + 1/f

Solving for u, we get:

u = -2f/3

Substituting this expression for u in the formula for image formation, we get:

1/(-f/2) = 1/(-2f/3) + 1/f

Solving for f, we get:

f = 2u/3

Therefore, the distance from the object to the lens should be 2u/3 = 2/3 times the focal length of the lens, or 2/3 * 17 cm = 2 * 5.87 cm = 11.74 cm.

This means that the object should be placed 11.74 cm from the lens in order to project an image of the object on the screen that is 3 times its actual size.  

Learn more about distance

https://brainly.com/question/31713805

#SPJ4

The acceleration of gravity on the surface (or outer limit) of Uranus can be calculated using Newton's law of universal gravitation. The formula for acceleration due to gravity is:

g = G * (M / r^2)

where g is the acceleration of gravity, G is the gravitational constant (approximately 6.67430 × 10^-11 m^3 kg^-1 s^-2), M is the mass of Uranus, and r is the radius of Uranus.

Given:

Mass of Uranus (M) = 8.68 × 10^25 kg

Radius of Uranus (r) = 2.56 × 10^7 m

Substituting these values into the formula, we get:

g = (6.67430 × 10^-11 m^3 kg^-1 s^-2) * (8.68 × 10^25 kg) / (2.56 × 10^7 m)^2

Simplifying the expression, we find:

g ≈ 8.87 m/s^2

Therefore, the acceleration of gravity on the surface (or outer limit) of Uranus is approximately 8.87 m/s^2.

Learn more about acceleration of gravity here:

https://brainly.com/question/28811174

#SPJ11

The energy stored in a capacitor is given by the formula:

E = 1/2 * C * V^2

where E is the energy stored, C is the capacitance, and V is the voltage across the capacitor.

First, we need to find the voltage across the capacitor. We know that the charge on the capacitor is 30 nC (nano Coulombs), and the capacitance is 10 nF (nano Farads). The voltage can be found using the formula:

Q = C * V

where Q is the charge and V is the voltage.

Substituting the given values, we get:

30 nC = 10 nF * V
V = 3 volts

Now, we can find the energy stored in the capacitor using the formula:

E = 1/2 * C * V^2

Substituting the values of C and V, we get:

E = 1/2 * 10 nF * (3 volts)^2
E = 45 nJ (nano Joules)

Therefore, the energy stored in the capacitor is 45 nano Joules. This energy represents the work done in charging the capacitor and is stored in the electric field between the plates of the capacitor. The energy can be released when the capacitor is discharged.

you know more about energy stored in a capacitor pls visit-

https://brainly.com/question/15057970

#SPJ11

Assuming the point is located on the edge of a rotating wheel, we can use the formula v = rω, where v is the velocity, r is the distance from the center, and ω is the angular velocity. To find ω, we can use the formula ω = θ/t, where θ is the angle the wheel has rotated and t is the time it took.

Since the point on the edge of the wheel has traveled a distance of 2πr in one revolution, we can find θ by dividing the time by the period (the time for one revolution), which is 2π/ω. Putting it all together, we get v = rω = r(2π/ω)(ω/t) = 2πr/t. Plugging in r = 20 cm and t = 4 s, we get v = 31.4 cm/s. Therefore, the magnitude of the velocity of the point located at r = 20 cm from the center of the wheel after 4 s is 31.4 cm/s.

To find the magnitude of the velocity (speed) of a point located at r = 20 cm from the center of the wheel after 4 seconds, you'll need to use the formula v = ωr, where v is the linear velocity, ω is the angular velocity, and r is the radial distance. First, calculate the angular velocity by dividing the angle covered (in radians) by the time (in seconds). Then, multiply the angular velocity by the radial distance to get the linear velocity. Once you've found the linear velocity, you'll know the speed of the point after 4 seconds.

To know more about Velocity visit-

https://brainly.com/question/17127206

#SPJ11

θ = arctan(μ) The value of θ at which the slotted cylinder of mass m will begin to slip is given by the arctan of the coefficient of static friction (μ).

This is because the angle of inclination (θ) at which the force of gravity acting on the cylinder becomes greater than the force of static friction holding it in place determines the point at which the cylinder will start to slip.

When θ is less than or equal to arctan(μ), the force of gravity acting on the cylinder is balanced by the force of static friction, and the cylinder remains stationary. However, when θ exceeds arctan(μ), the force of gravity becomes greater than the force of static friction, and the cylinder begins to slide down the incline.

It is important to note that this calculation assumes that the surface is rough enough to provide enough static friction to prevent slipping up to this angle. If the surface is too smooth, or if there is not enough static friction, the cylinder may begin to slip at an angle lower than arctan(μ).

learn more about friction here:

https://brainly.com/question/13000653

#SPJ11

The form of energy that does not require matter for traveling through space is radiant energy. Radiant energy is the energy carried by electromagnetic waves, such as visible light, infrared radiation, ultraviolet radiation, radio waves, microwaves, and X-rays. Unlike other forms of energy, radiant energy does not require a physical medium, such as matter, to propagate.

Radiant energy can travel through the vacuum of space, where there is no air or matter present. This property allows radiant energy to travel vast distances from its source, such as the Sun, to reach other celestial bodies or to be detected by instruments like telescopes. It is this characteristic of radiant energy that allows us to receive light from distant stars and galaxies, as well as to utilize various technologies based on electromagnetic waves, including wireless communication and satellite-based systems.

Therefore, the correct answer is C. radiant.

To know more about chemical please visit:

https://brainly.com/question/29240183

#SPJ11

a) It takes approximately 3.02 s to rotate through the first 2.00 revolutions.

b) It takes approximately 4.23 s to rotate through the next 2.00 revolutions.

We can use the following equations to solve this problem:

For rotational motion from rest, the equation is:

[tex]θ = (1/2) α t^2[/tex]

where θ is the angular displacement, α is the angular acceleration, and t is the time.

The number of revolutions is related to the angular displacement by:

θ = 2πn

where n is the number of revolutions.

(a) For the first 2.00 revolutions:

The angular displacement is:

θ = 2πn = 2π(2.00) = 12.57 rad

The time taken can be found using the equation:

[tex]θ = (1/2) α t^2[/tex]

Rearranging this equation to solve for time, we get:

t = √(2θ/α)

Substituting the values we get:

t = √(2(12.57)/1.50) = 3.02 s (to two significant figures)

Therefore, it takes approximately 3.02 s to rotate through the first 2.00 revolutions.

(b) For the next 2.00 revolutions:

The angular displacement is:

θ = 2πn = 2π(4.00) = 25.13 rad

Using the same equation as above, we get:

t = √(2θ/α) = √(2(25.13)/1.50) = 4.23 s (to two significant figures)

Therefore, it takes approximately 4.23 s to rotate through the next 2.00 revolutions.

learn more about  angular displacement

https://brainly.com/question/31327129

#SPJ4

The overtone number and the standing wave pattern number, previously denoted as "n," are related in the context of harmonic frequencies in standing wave systems.

In a standing wave system, such as a vibrating string or an air column, multiple harmonic frequencies can be produced. The standing wave pattern number, denoted as "n," represents the number of half-wavelengths that fit into the length of the system. It determines the fundamental frequency (n = 1) and subsequent harmonics (n = 2, 3, 4, and so on).

The overtone number, on the other hand, represents the number of harmonic frequencies that are multiples of the fundamental frequency. It includes all the harmonics, both odd and even. Therefore, the overtone number includes both the standing wave pattern numbers that correspond to odd harmonics (odd multiples of the fundamental frequency) and even harmonics (even multiples of the fundamental frequency).

In summary, the overtone number encompasses all the harmonic frequencies in a standing wave system, while the standing wave pattern number specifically refers to the individual harmonic frequencies.

To learn more about Fundamental frequency - brainly.com/question/31314205

#SPJ11

The condition for constructive interference in thin film is given by:

2nt = (m + ½)λ

where,

n = refractive index of the film

t = thickness of the film

m = order of the interference (m = 0, 1, 2, 3...)

λ = wavelength of light

For the given problem, the film is magnesium fluoride (MgF2) with refractive index n = 1.39, and the wavelength of orange light is λ = 615 nm.

Let the thickness of the film be denoted by t. For a strong reflection, we need to find the thinnest film that satisfies the condition for constructive interference.

For m = 0 (since we want the thinnest film), we have:

2nt = λ/2n

Substituting the given values, we get:

2 × 1.39 × t = 615 × 10^-9 / 2

Solving for t, we get:

t = (615 × 10^-9 / 2) / (2 × 1.39)

t ≈ 111.5 nm

Therefore, the thinnest film of MgF2 on glass that produces a strong reflection for orange light with a wavelength of 615 nm is approximately 111.5 nm.

To know more about constructive interference  click this link -

brainly.com/question/16098226

#SPJ11

The force exerted on the rope by the child is 71.8 N.

Weight of the sled holding by the child, W = 82 N

Angle of inclination, θ = 29°

The component of weight acting downwards,

Wx = mg sinθ

Wx = 82 x sin 29°

Wx = 82 x 0.485

Wx = 39.8 N

Given that the surface of the hill is frictionless. So, the force of friction will be zero.

Therefore, force exerted on the rope by the child,

F = mg cosθ

F = 82 cos29°

F = 82 x 0.875

F = 71.8

To learn more about force, click:

https://brainly.com/question/14514652

#SPJ1

An additional downward force of approximately 73.16 N is required to sink the block of wood in fresh water.

To help you with your question, let's consider the terms buoyancy and Archimedes' principle. When a block of wood is submerged in water, it experiences an upward buoyant force due to the displaced water.

Archimedes' principle states that the buoyant force is equal to the weight of the displaced fluid.

First, we need to find the volume of the wood.

Since the weight of the wood is 280 N and its density is 0.78 g/cm³, we can use the formula:

Weight = Density × Volume × Acceleration due to gravity.

Convert density to kg/m³: 0.78 g/cm³ = 780 kg/m³. Taking gravity as 9.81 m/s², we have:

280 N = 780 kg/m³ × Volume × 9.81 m/s²

Volume = 0.036 m³

Next, find the weight of the displaced water.

The density of fresh water is approximately 1,000 kg/m³. Using the same formula, we get:

Weight_water = 1000 kg/m³ × 0.036 m³ × 9.81 m/s²

Weight_water = 353.16 N

Finally, to find the additional downward force required to sink the wood, subtract the weight of the wood from the weight of the displaced water:

Additional_force = Weight_water - Weight_wood

Additional_force = 353.16 N - 280 N

Additional_force = 73.16 N

Learn more about archimedes principle at

https://brainly.com/question/31950755

#SPJ11

A closed piston/cylinder device contains 0,5 kg of carbon dioxide (CO₂) initially at 300 K and 100 kPa. 195kJ  is  heat transfer during the process.

In an isobaric process, the pressure remains constant. To determine the heat transfer during the process, we need to apply the equation for isobaric heat transfer:
[tex]Q = m  Cp (T2 - T1)[/tex]
where Q is the heat transfer, m is the mass of CO₂, Cp is the constant pressure specific heat, and T1 and T2 are the initial and final temperatures, respectively. The volume ratio (V2 / V1) can be related to the temperature ratio (T2 / T1) as:
[tex]T2 / T1 = V2 / V1[/tex]
Since V1 and V2 are given, we can find the final temperature T2:
T2 = T1  (V2 / V1)
For CO₂, the constant pressure specific heat, Cp, at 300 K is approximately 0.844 kJ/kg·K.
Now, we have enough information to find the heat transfer during the process:
Q = 0.5 kg × 0.844 kJ/kg·K × (T2 - 300 K)

=195kJ
By choosing the nearest value from the provided options, the heat transfer during the process is approximately 195 kJ (input).

Learn more about isobaric process here

https://brainly.com/question/30420499

#SPJ11

The new volume of the balloon when heated to 48.0°C is 5.36 liters. To solve this problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas. The formula for the combined gas law is : (P₁V₁)/T₁ = (P₂V₂)/T₂

P₁ and T₁ are the pressure and temperature of the gas before the change, P₂ and T₂ are the pressure and temperature of the gas after the change, and V₁ and V₂ are the volumes of the gas before and after the change.

In this problem, we are given the initial volume V₁ = 2.68 liters and the initial temperature T₁ = 24.0°C. We want to find the final volume V₂ when the temperature changes to T₂ = 48.0°C. We are not given the pressure of the gas, but we can assume that it remains constant.

Substituting the given values into the combined gas law, we get:

(P₁V₁)/T₁ = (P₂V₂)/T₂

Since the pressure is constant, we can cancel it out:

V₁/T₁ = V₂/T₂

Solving for V₂, we get:

V₂ = (V₁ x T₂) / T₁

Substituting the values we have, we get:

V₂ = (2.68 x 48.0) / 24.0 = 5.36 liters

Therefore, the new volume of the balloon when heated to 48.0°C is 5.36 liters.

To know more about volume, refer

https://brainly.com/question/14197390

#SPJ11

The most widely accepted explanation for the presence of gas giants so close to their stars is option d) these gas giants formed far from the star and migrated inward due to the effects of gravitational interactions with other bodies in the system.

According to this theory, gas giants like Jupiter and Saturn begin to form in the outer regions of a protoplanetary disk around a young star, where there is an abundance of gas and dust. As the planet grows, it begins to interact gravitationally with other bodies in the disk. These interactions can cause the planet's orbit to become unstable, and it may be deflected towards the star.

As the gas giant migrates inward, it can begin to interact with the gas in the disk. This interaction can create a drag force that slows down the planet's migration. The planet eventually settles into a stable orbit, which may be very close to the star.

Observations of exoplanets have shown that gas giants can indeed migrate inward and settle into close orbits around their stars. In fact, it is thought that most gas giants outside of our own solar system may have migrated to their current orbits.

Option a) is not entirely accurate, as the nebular theory does not need to be modified to account for the migration of gas giants. Option b) is also not entirely accurate, as hot Jupiters are actually very hot due to their close proximity to their stars, and they likely formed farther out before migrating inward. Option c) is possible, but not very likely, as the capture of a gas giant by a star would require very specific conditions and is not a common occurrence.

Visit to know more about Gravitational:-

brainly.com/question/27943482

#SPJ11

The  kinetic energy of the ejected electron is approximately 2.72 × 10^-19 joules.

To calculate  the kinetic energy of the ejected electron, we need to use the energy of the incident ultraviolet (UV) photon and the work function of the material from which the electron is ejected.

The energy of a UV photon can be calculated using the equation:

E = hc/λ

where h is Planck's constant, c is the speed of light in vacuum, and λ is the wavelength of the photon.

Substituting the given values, we have:

E = (6.626 × 10^-34 J·s) * (3.00 × 10^8 m/s) / (200 × 10^-9 m) = 9.94 × 10^-19 J

Assuming that the electron is ejected from a metal surface, the work function (φ) of the metal is the minimum energy required to eject an electron from its surface. The kinetic energy of the ejected electron (K) can be calculated by subtracting the work function from the energy of the incident photon:

K = E - φ

The work function varies for different metals, but assuming a typical value of around 4.5 electron volts (eV), we have:

φ = 4.5 eV * (1.602 × 10^-19 J/eV) = 7.22 × 10^-19 J

Substituting the values of E and φ, we get:

K = 9.94 × 10^-19 J - 7.22 × 10^-19 J = 2.72 × 10^-19 J

Therefore, the kinetic energy of the ejected electron is approximately 2.72 × 10^-19 joules.

Visit to know more about Kinetic energy:-

brainly.com/question/25959744
#SPJ11

A circuit that has more resistance will have a smaller current, provided that the voltage across the circuit remains constant. The correct option is B

The relationship between the current, voltage, and resistance in an electrical circuit is outlined by the fundamental law known as Ohm's Law in electrical engineering.

The relationship between resistance and current is inversely proportional if the voltage across the circuit stays constant. That is, when the circuit's resistance rises, the amount of current flowing through it falls, and vice versa.

Therefore, A circuit that has more resistance will have a smaller current, provided that the voltage across the circuit remains constant.

Learn more about Ohm's Law here : brainly.com/question/231741

#SPJ1

The electrical force between the doughnuts would decrease by a factor of 4 to 3.75 N.

The electric force between two charges is given by Coulomb's law:

F = k q₁ q₂ / r²

where F is the force in Newtons, k is Coulomb's constant (k = 9 x 10^9 N*m²/C²), q₁ and q₂ are the charges in Coulombs, and r is the distance between the charges in meters.

Using the given values, the electric force between the two doughnuts is:

F = (9 x 10⁹) * 0.002 * 0.0015 / (0.3)² = 15 N

If the charge of q1 is tripled while everything else is held constant, the new force would be:

F' = (9 x 10⁹) * (3*0.002) * 0.0015 / (0.3)² = 45 N

So the electric force between the doughnuts would triple to 45 N.

If the distance between the two doughnuts is doubled while everything else is held constant, the new force would be:

F'' = (9 x 10⁹) * 0.002 * 0.0015 / (0.6)² = 3.75 N

So the electric force between the doughnuts is  decrease by a factor of 4 to 3.75 N.

To know more about electrical force

https://brainly.com/question/9672981

#SPJ1

The period of a simple pendulum 84 cm long on Earth is approximately 1.35 seconds.

The period of a simple pendulum is given by the formula T = 2π√(L/g), where T is the period, L is the length of the pendulum, and g is the acceleration due to gravity. On Earth, the value of g is approximately 9.81 m/s^2. Converting the length of the pendulum from centimeters to meters, we have L = 0.84 m. Substituting these values into the formula gives:

T = 2π√(0.84 m/9.81 m/s^2) ≈ 1.35 s.

Therefore, the period of a simple pendulum 84 cm long on Earth is approximately 1.35 seconds.

To learn more about Pendulum click here

https://brainly.com/question/29702798

#SPJ11

When light travels from a medium with a better refractive record (such as water) to a medium with a lower refractive record (such as air), it can experience a wonder called total internal reflection. This happens when the point of frequency of the light at the boundary between the two media surpasses a critical point.

Within the given situation, if the angle of incidence  of the light at the water-air interface is 60 degrees, and the critical angle for water is 49 degrees, at that point the light will not undergo total inside reflection. Instep, it'll refract (twist) because it crosses the boundary and enters the air. The precise sum of refraction will depend on the point of frequency and the refractive lists of water and air.

Hence, since the angle of incidence(60 degrees) is more noteworthy than the  critical angle (49 degrees), the light will pass from water into air and proceed its way within the air medium, possibly refracting absent from the typical line (the line opposite to the surface of the water). It'll not be reflected back into the water due to internal reflection.

Learn more about reflection from

https://brainly.com/question/18772331

#SPJ1

When the elevator starts to accelerate upwards, the reading on the spring scale will increase from the initial reading of 1 N. This increase is due to the additional force experienced by the object on the scale as a result of the elevator's upward acceleration.

In an accelerating elevator, there are two forces acting on the object placed on the scale: the force due to gravity (its weight) and the force due to the elevator's upward acceleration. These forces combine to determine the net force on the object.

When the elevator is not moving, the scale reads 1 N, which represents the object's weight (equal to its mass multiplied by the acceleration due to gravity). Let's assume the object's mass is 'm' kg, and the acceleration due to gravity is 'g' m/s^2.

Weight = m * g

Now, when the elevator starts to accelerate upwards, there will be an additional force acting on the object, which is equal to the mass of the object multiplied by the elevator's acceleration. Let's denote the elevator's acceleration as 'a' m/s^2.

Additional force = m * a

The net force acting on the object will be the sum of its weight and the additional force:

Net force = Weight + Additional force

                 = m * g + m * a

Since force is directly proportional to the reading on the scale, the reading on the scale will be equal to the net force acting on the object.

Therefore, the new reading on the scale will be:

Reading on scale = Net force

                            = m * g + m * a

Since the elevator is accelerating upwards, the elevator's acceleration (a) will be greater than zero. As a result, the reading on the scale will be greater than the initial 1 N reading when the elevator was at rest.

Learn more about Net force : brainly.com/question/30851640

#SPJ11

In contextual integrity, the data subject decides whether or not a requested transmission is acceptable given it's ci-tuple - True.

In contextual integrity, the data subject is the individual whose personal information is being transmitted, and they have the power to decide whether or not a requested transmission is acceptable based on the norms and values of the context in which the information is being transmitted. The "ci-tuple" refers to the contextual information tuple, which includes information about the context of the data transmission, such as the sender, recipient, type of data, and purpose of the transmission. The data subject can use this information to make an informed decision about whether or not the transmission is acceptable.

To know more about ci-tuple, click here:

https://brainly.com/question/20813201

#SPJ11