Answer:Movement of air caused by temperature or pressure differences is wind. Where there are differences of pressure between two places, a pressure gradient exists, across which air moves: from the high pressure region to the low pressure region. This movement of air, however, does not follow the quickest straight line path. In fact, the air moving from high to low pressure follows a spiralling route, outwards from high pressure and inwards towards low pressure. This is due to the rotation of the Earth beneath the moving air, which causes an apparent deflection of the wind to the right in the northern hemisphere, and left in the southern hemisphere. Consequently, air blows anticlockwise around a low pressure centre (depression) and clockwise around a high pressure centre (anticyclone) in the northern hemisphere (see Figure 3.1). This situation is reversed in the southern hemisphere.
Explanation:Movement of air caused by temperature or pressure differences is wind. Where there are differences of pressure between two places, a pressure gradient exists, across which air moves: from the high pressure region to the low pressure region. This movement of air, however, does not follow the quickest straight line path. In fact, the air moving from high to low pressure follows a spiralling route, outwards from high pressure and inwards towards low pressure. This is due to the rotation of the Earth beneath the moving air, which causes an apparent deflection of the wind to the right in the northern hemisphere, and left in the southern hemisphere. Consequently, air blows anticlockwise around a low pressure centre (depression) and clockwise around a high pressure centre (anticyclone) in the northern hemisphere (see Figure 3.1). This situation is reversed in the southern hemisphere.
All of the following are contributions of the Space Center for Florida except which one?
Answer:
You have to give us an answer choice : )
here ya go lol always with the warning "Don't use such phrases here, not cool! It hurts our feelings"
Answer:
what
Explanation:
Answer:
thanks!
and i get that a lot- looks like we are bad guys
Explanation:
PLZZZZZZZZ HELP!!!!!!!!!!!!!!!!!
Answer:
Qs 12) D
Qs 13) D
Explanation:
i studied this
who ever gets this right will get a brainlest, science
Answer:
b
Explanation:
Answer:
C) Sedimentary Rocks :)
Okay! Last question was a warm-up question. And now to get your brain thinking some more, how about another one?:
First you eat me, then you get eaten. What am I?
Pls help everything dew in 20 minutes!
For the second part i gust need the information. Also the planet is Saturn.
Based on their climate zones, which statement best compares the climates of Bogata and Alberta? (2 points)
a
Bogata has higher temperatures and less precipitation than Alberta.
b
Bogata has higher temperatures and more precipitation than Alberta.
c
Bogata has lower temperatures and less precipitation than Alberta.
d
Bogata has lower temperatures and more precipitation than Alberta.
Answer:
Explanation:
alberta
Behavior animals are born knowing how to do is an
Example
Option
Animal
Instinct
Answer:
Instinct.
Explanation:
"instinct, a natural propensity or skill of a specified kind."
I need the ones that are empty
Answer:
it is C for both 6 and 8
Explanation:
Answer:
for no. 6 the answer is c, as well as for no. 8
Explanation:
hope this helps!
~mina
How can you use the density of an object to predict whether it will sink or float?
Answer:
Explanation:
If an object has a higher density than the fluid it is in (fluid can mean liquid or gas), it will sink. If it has a lower density, it will float. Density is determined by an object's mass and volume. If two objects take up the same volume, but have one has more mass, then it also has a higher density.
the mechanical energy of a vibrating system is known as?
If 4 mg of carbon combines with oxygen to form carbon dioxide molecules, how
much carbon will be found in the product?
8 mg
4 mg
2 mg
1 mg
Create a list of 5 potential jobs that students of genealogy can obtain.
Answer:
Private Investigator.
Investigative Genetic Genealogist.
Historic Preservationist.
Military Repatriation Expert.
Heir Searcher.
Explanation:
The potential jobs that students of genealogy can obtain are Genealogical Researcher, Family History Consultant, Archivist, Genetic Genealogist, and Genealogy Educator.
1) Genealogical Researcher: A genealogical researcher is responsible for conducting in-depth research to trace family histories and construct detailed family trees.
2) Family History Consultant: Family history consultants provide guidance and assistance to individuals or families interested in discovering their genealogy.
3) Archivist: Archivists play a crucial role in preserving and managing historical records, including genealogical documents. They are responsible for collecting, organizing, cataloging, and maintaining records that hold valuable genealogical information.
4) Genetic Genealogist: Genetic genealogists specialize in using DNA analysis to trace family lineages and uncover genetic relationships among individuals.
5) Genealogy Educator: Genealogy educators teach courses, workshops, or seminars on genealogical research techniques, methodologies, and resources.
Therefore, The potential jobs that students of genealogy can obtain are Genealogical Researcher, Family History Consultant, Archivist, Genetic Genealogist, and Genealogy Educator.
To know more about genealogy:
https://brainly.com/question/33717455
#SPJ6
What is the motion of the particles in this kind of wave?
A.The particles will move up and down over large areas.
B.The particles will move up and down over small areas.
C.The particles will move side to side over small areas.
D.The particles will move side to side over large areas.
A researcher wants to investigate the relationship between pressure and temperature in carbon dioxide gas (CO2) by using a pressure sensor on an airtight flask.
image
In Step 1 of the investigation, the student adds CO2 to the flask at 20℃.
Choice Steps Taken Expected Result Graph
A.
Step 2: Turn on the hot plate to increase the temperature of the gas and record the resulting pressure.
Step 3: Repeat with different sizes of flasks to account for volume.
image
B.
Step 2: Keep the volume of the flask constant.
Step 3: Turn on the hot plate to increase the temperature of the gas and record the resulting pressure.
image
C.
Step 2: Turn on the hot plate to increase the temperature of the gas and record the resulting pressure.
Step 3: Repeat with different sizes of flasks to account for volume.
image
D.
Step 2: Keep the volume of the flask constant.
Step 3: Turn on the hot plate to increase the temperature of the gas and record the resulting pressure.
image
Which steps should the student take next and what would be the expected results?
A.
Choice C
B.
Choice B
C.
Choice A
D.
Choice D
PLEASE GIVE ME THE CORRECT ANSWER. THANK YOU IN ADVANCE!!
Answer: Choice D
Explanation:
What would happen next is that the pressure Inside the flask would increase according to Gay-Lussac's Law, which states that the proportion between pressure and Temperature are directly proportional, meaning if the temperature increases, so does the pressure.
Plz help no links
In which layer of the Earth are plate-moving convection currents located?
A. Mantle
B. Inner core
C. Crust
D. All of the above
I can't type, so... please make brainliest answer.
pls help I will give brainliest
Answer: Pretty sure the answer is B but this kind of looks like a test question.
Explanation:
Answer: hi
Explanation: cool is me
I need help!! Please help me!! It's due soon!!!! NO LINK PLEASE!!!!!!!
Answer:
??????????????????????????????
the ten types of network that use today
and explain your answer
giving away brainlist
Answer:
Local Area Network (LAN)
Wireless Local Area Network (WLAN)
Campus Area Network (CAN)
Metropolitan Area Network (MAN)
Wide Area Network (WAN)
Storage-Area Network (SAN)
System-Area Network (SAN)
Explanation:
Hope this helps!!
Which chemical equation correctly shows the formation of water from hydrogen
and oxygen?
A. H2 + 20 + H2O
B. 2 H2 + O2 + 2 H2O
C. H2 + O2 + H2O
D. H + O2 + H2O
Answer:
d. H + O2 ------ H2O
that's the formation of water
PLEASE HELP I'LL GIVE BRAINLIEST: Consider a sound wave produced by a tuning fork. Through which materials would the sound travel the fastest? Order the materials shown according to the speed at which a sound wave would travel through them, from slowest to fastest.
Answer:
Cold airHot airOcean GlassCold air
Hot air
Ocean
Glass
ex:
Sound travels fastest through solids. This is because molecules in a solid medium are much closer together than those in a liquid or gas, allowing sound waves to travel more quickly through it.
Volume is a measurement of the height of the wave known as what?
this is science
a firework rock is burning at the rate of 14g/s all the products of combustion are ejected in one direction at the speed of 210m/s what is the greatest height the rockect can have if it is moving vertically upward Give your answer in newtons
SO MY NAME IS ROHITH AND I LIKE MM
Explanation:
A scientist is investigating which type of medicine would dissolve faster, a solid pill or a scoop of powder. Which hypothesis should the scientist develop given prior knowledge about surface area?
PLEASE GIVE THE RIGHT ANSWER!!! THANK YOU IN ADVANCE
A.
Powders have less surface area and will dissolve faster.
B.
Solid pills have less surface area and will not dissolve.
C.
Solid pills have more surface area and will take longer to dissolve.
D.
Powders have more surface area and will dissolve faster.
Answer: the answer is b Solid pills have less surface area and will not dissolve.
Explanation:
Does this equation satisfy the Laws of Conservation of Matter and Mass?
Н2РО4 - P4010 + H2O
O yes
O no
Answer:
yes
Explanation:
it does
Help ASAP PLZZZZ!! I will give brainlist to the first right person.
Answer:
1. The Speed is 390
2. The Frequency is 425 Hz
3. The Wavelength is 1.3
Explanation:
1. To find the speed of a wave you have to do the formula of speed.
Speed = Wavelength x Wave Frequency.
Speed = 1.5 * 260
= 390
2.
Formula
F= [tex]\frac{1}{T}\\[/tex]
F = 340 / 0.8
= 425
3.
Formula
Wavelength = speed / frequency
Wavelength = 440 / 344 (rounded to nearest tenth if necessary)
= 1.3
Answer:1. The Speed is 390
2. The Frequency is 425 Hz
3. The Wavelength is 1.3
Explanation:
1. To find the speed of a wave you have to do the formula of speed.
Speed = Wavelength x Wave Frequency.
Speed = 1.5 * 260
= 390
Explanation:
study the given lever and calculate the effort to the balance the load used in it ?
Answer:
solution given:
load distance [l.d.]=2m-1.5m=0.5m
effort distance [e.d.]=1.5m
load [l]=500N
effort[E]=?
we have
load ×load distance =effort ×effort distance
500N×0.5=effort ×1.5
effort =250/1.5=166.67N
so
effort =166.67N
Answer:
explanation is in the attachment
hope it is helpful to you
Which statement describes the motion of the sun?
answer choices
The sun rotates more slowly at its equator.
The sun rotates faster at its equator.
The sun rotates faster at its poles.
the sun does not rotate at its poles.
Answer: The sun rotates faster at its equator
Explanation:
the Sun does not rotate as a solid body, but it spins differentially. That means that it rotates faster at the equator of the Sun and slower at its poles.
Yo 20 points no links plz
Describe how plates create mountain ranges like the Himalayas.
2. Diagram how pulling apart continental crust could create mountains and basins. What are the mountains and
basins called?
3. Why don’t strike slip faults create mountains?
Answer: Describe how plates create mountain ranges like the Himalayas.
Answer- Most of the world's largest mountains form as plates collide at convergent plate boundaries. This creates mountains. Folding and faulting in these collision zones makes the crust thicker. The world's highest mountain range, the Himalayas, is growing as India collides with Eurasia
2. Diagram how pulling apart continental crust could create mountains and basins. What are the mountains and
basins called? Answer- When tensional stresses pull crust apart, it breaks into blocks that slide up and drop down along normal faults. The result is alternating mountains and valleys, known as a basin-and-range
3. Why don’t strike slip faults create mountains? Answer-When tensional stresses pull crust apart, it breaks into blocks that slide up and drop down along normal faults. The result is alternating mountains and valleys, known as a basin-and-range
Explanation: I'm really sorry that its a lot but I hope it helps :)
Answer:
he movement of the plates creates three types of tectonic boundaries: ... Where plates serving landmasses collide, the crust crumples and buckles into mountain ranges. ... where two plates grind past each other along what are called strike-slip faults. These boundaries don't produce spectacular features like mountains or ...
Explanation: