what are Faraday's laws of induction??? Grade 9.​

Answer:

"When the same amount of electricity is passed through different electrodes, the mass of electrodes liberated during electrolysis is directly proportional to its chemical equivalent."

The number of electrons represented by the following quantum numbers is 1 electron

The set of numbers used to describe the position and energy of the electron in an atom are called quantum numbers. There are four quantum numbers, namely, principal (n), azimuthal (l), magnetic(m) and spin quantum numbers (s). The values of the conserved quantities of a quantum system are given by quantum numbers.

According to the data given, n=2 which means the shell number is 2, l =-1 means its the subshell is p and only one orientation, which can accomodate maximum of 2 electrons, but as the ms = 1/2 so we are here talking about just one electron with a +1/2 spin

Therefore with the above given quantum number the electron represented is one

To know more about quantum numbers

https://brainly.com/question/17854272

#SPJ1

The number of photons that is emitted per second is 7.9 * 10^18 photons per second.

We know that the photons have to do with the particles of light that are in motion. Now, we know that the power that is being produced by the heat lamps have been obtained as 26.0 watts. It is also know that this could be written as 26 J/s.

We now have to find the energy of the photons;

Wavelength of the photons = 6.0 μm or 6 * 10^-6 m

Plank's constant = 6.6 * 10^-34 Js

Speed of light = 3 * 10^-10 m/s

Now, we have

E = 6.6 * 10^-34 * 3 * 10^-10 /6 * 10^-6

E = 3.3 * 10^- 18 J

We have;

26 J/s * 1 photon/ 3.3 * 10^- 18 J

= 7.9 * 10^18 photons per second.

Learn more about photons:https://brainly.com/question/20912241

#SPJ1

According to the given statement 0.49 M  is the molarity of the diluted solution.

Molarity (M), which is calculated by dividing the solute's weight in moles by the the solution's volume in liters, is the most widely used unit to express solution concentration: litres of solution/moles of solute equals M.

Utilizing the dilution law equation

M₁V₁ = M₂V₂

Where

M₁ is the initial molarity

V₁ is the initial volume

M₂ is the final molarity

and V₂ is the final volum

From the given information,

M₁ = 1.3 M

V₁ = 191 mL

V₂ = 500.0 mL

The result of entering the parameters into the formula is

1.3  * 191 = M[tex]_2[/tex] * 500

M[tex]_2[/tex]  = 1.3 * 191 / 500

M[tex]_2[/tex] = 248.3/500

M[tex]_2[/tex] = 0.4966 M

M[tex]_2[/tex] ≅ 0.49 M

To know more about Molarity visit:

https://brainly.com/question/8732513

#SPJ13

The wavelength of the wave is obtained as 0.4 m.

The wavelength has to do with the distance that have been covered by the wave. In this case, we can use the frequency of the wave that have been supplied in the question and the speed of light which is a constant to be able to obtain the wavelength of the wave.

Knowing that;

wavelength = speed of light/frequency

speed of light = 3 * 10^8 m/s

Frequency = 742 * 10^3 Hz

wavelength =  3 * 10^8 m/s/ 742 * 10^3 Hz

= 0.4 m

Learn more about wavelength:https://brainly.com/question/13533093

#SPJ1

To solve such this we must know the concept of combustion reaction. Combustion reaction happens in presence of oxygen. Magnesium oxide is  formed when magnesium undergoes combustion.

Chemical reaction is a process in which two or more than two molecules collide in right orientation and energy to form a new chemical compound. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, double displacement reaction.

When magnesium undergoes combustion, the magnesium oxide is formed.

2Mg+O₂[tex]\rightarrow[/tex]2MgO

Therefore, magnesium oxide is  formed when magnesium undergoes combustion.

Learn more about the chemical reactions, here:

https://brainly.com/question/3461108

#SPJ1

Explanation:

E =hv

= h*3*10power8meterpersecond ÷6.22*10power of -7m

where h is planks constant

Energy of light emitted is 4117.64 * 10 ⁻²⁵. E= hv.

An electron's energy is determined by where it is in relation to the atom's nucleus. The distance an electron in an atom has to travel from the nucleus depends on its energy level.

The mass of an electron is roughly 1/1836 that of a proton. The intrinsic angular momentum (spin) of the electron is given in units of the decreased Planck constant and has a half-integer value.

Energy has a negative sign, meaning that an electron is drawn to the nucleus. The electron has the least energy in the first orbit, and as n grows, or as it gets less negative, the electron's energy increases.

Therefore, Energy of light emitted is 4117.64 * 10 ⁻²⁵. E= hv.

To learn more about energy, refer to the link:

https://brainly.com/question/1932868

#SPJ2

Option D. The atoms rearrange in the chemical reaction so that glucose is made.

A chemical reaction is a manner in which one or extra substances, the reactants, are transformed into at least one or extra different materials, the goods. materials are both chemical factors or compounds. A chemical reaction rearranges the constituent atoms of the reactants to create one-of-a-kind substances as merchandise.

Examples of chemical reactions in everyday life consist of photosynthesis, rust, baking, digestion, combustion, chemical batteries, fermentation, and washing with soap and water. Chemical reactions arise everywhere in the global around you, now not simply in a chemistry lab.

On the idea of the product fashioned, special forms of reactions are Combustion response, Decomposition response, Neutralization response, Redox response, Precipitation or Double-Displacement reaction, Synthesis response

Learn more about chemical equations here:-https://brainly.com/question/11231920

#SPJ1

The empirical formula for this compound is CH₂Cl₂.

C = 14.14% / 12 = 1.17

H = 2.38% / 1 = 2.38

Cl = 83.48% / 35.5 = 2.35

Now, divide by 1.17

C = 1.17 / 1.17 = 1

H = 2.38 / 1.17 = 2

Cl = 2.35 / 1.17 = 2

Therefore, The empirical formula for this compound is CH₂Cl₂.

In chemistry, the  empirical formula of a chemical compound is the best entire variety ratio of atoms found in a compound.

There are three main types of chemical formulas: empirical, molecular and structural. Empirical formulas display the best whole-range ratio of atoms in a compound, molecular formulas show the quantity of every kind of atom in a molecule, and structural formulas display how the atoms in a molecule are bonded to every different.

Learn more about empirical formula here:- https://brainly.com/question/1603500

#SPJ9

The amount of force will be 320 N.

Force can be defined as the ratio of work and distance. The unit of the force will be Newton.  It can be represented by N. There are various type of force and they are tension force and frictional force.

The given data:

W = 8000J

d = 25m

The relation between the force, distance and work can be expressed as:

W = f×d....(i)

Put the given data in equation (i).

8000 J = f × 25m

f = 8000/25

f = 320 N

Therefore, the force will be 320 N.

To know more about Force.

https://brainly.com/question/28821658

#SPJ1

The mass of NCl3 in 4.00 moles of NCl3 is 481.44 grams

Mole is defined as the amount of the substance containing the same number of discrete entities (atoms, molecules, ions, etc) as there are atoms in a sample of pure 12C weighing exactly 12g. The number of particles present in one mole of any substance =Avogadro Number=6.

The formula for number mole is given as:

Number of moles =  Mass of the substance ; Now substituting the values

                                   Molar mass

⇒ 4.00 =  x                               [Molar mass of NCl3 = 120.36]

               120.36

⇒ x = 4.00 × 120.36

⇒ x = 481.44 grams

Therefore the mass of NCl3 is 481.44 grams

To know more about mole concept

https://brainly.com/question/23059935

#SPJ1

To calculate the atoms of an element in a given molecule, we need to multiply stoichiometry by the number that is written on the foot of that element. Therefore, the balanced equation is

CH[tex]_4[/tex]+4S[tex]\rightarrow[/tex]CS[tex]_2[/tex]+2H[tex]_2[/tex]S

Balanced equation is the one in which the total number of atoms of a species on reactant side is equal to the total number of atoms on product side. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, displacement reaction.

The skeletal equation is

CH[tex]_4[/tex]+S[tex]\rightarrow[/tex]CS[tex]_2[/tex]+H[tex]_2[/tex]S

The number of carbon atoms on reactant and product side is 1, so C is balanced.

The number of hydrogen atoms on reactant side is 4 while on product side it is 2, so to balance we need to multiply H[tex]_2[/tex]S by 2.

CH[tex]_4[/tex]+S[tex]\rightarrow[/tex]CS[tex]_2[/tex]+2H[tex]_2[/tex]S

The number of sulfur atoms on reactant side is 1 while on product side it is 4, so to balance we need to multiply S by 4.

CH[tex]_4[/tex]+4S[tex]\rightarrow[/tex]CS[tex]_2[/tex]+2H[tex]_2[/tex]S

Therefore, the balanced equation is

CH[tex]_4[/tex]+4S[tex]\rightarrow[/tex]CS[tex]_2[/tex]+2H[tex]_2[/tex]S

Learn more about the balanced equation, here:

https://brainly.com/question/7181548

#SPJ1

According to research, the ear is a complex organ that meets hearing, being of great importance to humans.

Hearing is a physiological process where sound waves, which are vibrations, enter through the outer ear and reach the middle ear, causing the eardrum to vibrate.

In this sense, the vibrations, in turn, cause the movement of small bones called stirrup, anvil and malleus, where they reach the organ of Corti, stimulating the auditory nerve and finally become nerve impulses that reach the brain.

Therefore, we can conclude that according to research, hearing is a process that implies that sound waves first impact the eardrum until finally reaching the auditory centers of our brain.

Learn more about hearing here: https://brainly.com/question/16034254

#SPJ1

The solubility of solute in a solution can be find out from the solubility constant Ksp and molar concentrations. The solubility of iron hydroxide in the solution is 3.19 ×10 ⁻¹⁶ M.

Solubility of substance is the fraction of its concentration which dissolves in a solvent at a specific temperature. The solubility constant Ksp is the product of molar concentrations of the ions in the solute.

It is given that the pH of the solution is 13.15. Thus, pOH = 14 -13.15 = 0.85.

[OH-] = Antilog (pOH) = antilog (0.85)

         = 7.07 M.

The solute Fe(OH)₂ dissociates into Fe²⁺ ion and 2 OH- ions. Let s be the solubility of one mole of ion. Thus [Fe²⁺] = s. Then, the Ksp can be written as follows:

Ksp = [Fe²⁺] [OH-]²

 1.6 × 10⁻¹⁴  = s  × [7.07 M]²

   s =   1.6 × 10⁻¹⁴/[7.07 M]²

      =  3.19 ×10 ⁻¹⁶ M.

Therefore, the molar solubility of iron(II) hydroxide in the given solution is  3.19 ×10 ⁻¹⁶ M.

To find more on solubility, refer here:

https://brainly.com/question/28170449

#SPJ1

Stability can be seen in chemistry through thermodynamics or kinetic stability.

There are two possible meanings of stability when it refers to coordination compounds (metal complexes): kinetic stability or thermodynamic stability.

Learn more about thermodynamic stability here:

https://brainly.com/question/28431165

#SPJ9

Answer:1.4652

Explanation:

0.74g/ml

0.74x1.98

=1.4652

Answer:

0.3269

Explanation:

You would use the ideal gas law along with the equation Pv=nrt when P is pressure, v is volume, n is the moles of gas you are solving for, r is a constant that is , and t is temperature,

So you are given pressure, volume, and temperature, so you would begin by plugging in your known values:

P = 1atm

V = 8.00 L

T = 298 K ( but you usually want to use Kelvin so you would add 273.15; this is because 0 C is 273.15 K and 25+273=298)

(1)(8)=n(0.0821)(298)

then

8=n(24.4658)

next isolate n by dividing 24.4658 on each side

8/24.4658 = n (24.4658/24.4658)

0.3269=n(1) or n

Heat is released when 45.9 g of propane is burned is - 547.352 kcal

Given that :

ΔH = - 526.3 kcal/mol

mass = 45.9 g

molar mass = C₃H₈

                    = 12 × 3 + 8 × 1

                   = 44 g / mol

The reaction is given as :

C₃H₈   +   5O₂    ----->     3CO₂    +   4H₂O

number of moles = mass / molar mass

                            = 45.8 / 44

                             = 1.04 mol

ΔH = Q / n

where ,

Q = heat

n = number of moles

Q = ΔH × n

   = - 526.3 × 1.04

Q     = - 547.352 kcal

Thus, The reaction for the combustion of propane is :

C₃H₈   +   5O₂    ----->     3CO₂    +   4H₂O

Heat is released when 45.9 g of propane is burned is - 547.352 kcal

To lean more about heat here

https://brainly.com/question/25384702

#SPJ1

The explanation of the reaction between the compounds is here.

What is compound?

A thing that is composed of two or more separate elements is called compound.

Sol-There is no chemical reaction. Know the extent between to react to react and fair play mixing I too means iodine and potassium I Od um ordered solution solution and I could not React directly as such bad form poorly I owed eight iron like I five and I seven. They negatively charged iodide in the negatively charged how you died. All right, come and did come about charge donor. The neutral iodine charging accepted a solution of iodine, a solution of iodine and potassium iodide um added in water had the light orange brown color, light orange brown color, orange brown color. Once a mileage is added it from another city complex. When once a mileage in my load I added it from another city complex.

When once a mileage in my load I added it from another city complezx.. The police have cried. The police had cried, the police have cried act as a George donor charges and the police have died. And the poly iodide act as a except her. The new council looks absorbing light of a different wavelength than polly iodide and the color turn dark dark blue. The object structure are poorly added inside the am I late helix Alex is not clear. Are bulky and sit inside the policy crowds of glucose units and could not get out of date.

To know more about compound click-

https://brainly.com/question/26487468

#SPJ1

Since energy can neither be created nor destroyed, it follows that the wavelength that was absorbed by the electron is also emitted.

We know that the Bohr model posses the idea that an electron could move from a lower to higher energy level by the absorption of a photon of light. Thus we know that, when we supply energy to the electron, it is that energy that leads to the electronic transition.

It is clear that the energy that the electron has taken in when it moves up is the same as the energy that it would give out when it comes down in accordance with the law of conservation of energy.

Learn more about Bohr model:https://brainly.com/question/3964366

#SPJ1

Based on the mole ratio of the reaction, the mass of aluminum oxide that is produced from the reaction between 5 g of aluminum and 9g of oxygen is 9.39 g.

The mass of aluminum oxide that can be formed from the reaction between aluminum and oxygen is determined from the limiting reactant and the mole ratio of the reaction.

The mole ratio of the reaction is as given in the equation of the reaction below:

2 Al (s) + 3 O₂ (g) ----> Al₂O₃ (s)

The mole ratio of Al to O = 2 : 3

Moles of Al present = 5/27

Moles of Al present = 0.185 moles

Moles of O present = 9/32

Moles of Al present = 0.281 moles

Al is the limiting reactant

Mole ratio of Al to Al₂O₃ = 2 : 1

Mass of Al₂O₃ produced = 0.185/2 * 101.56

Mass of Al₂O₃ produced = 9.39 g

Learn more about limiting reactants at: https://brainly.com/question/26905271

#SPJ1

Answer:

Na,Ba,Ti on the same base placement on the periodic table.

Answer:

O,S,Se

Explanation:

Because they lose electrons and become an anion to become ionicly bonded and they are in the same period

Answer:

Na,Ba,Ti,on their placement on the periodic table...

According to the solution 359.5 L volume at -15° C while the pressure remains constant.

The definition of force in physics is The push or pull on a massed object alters its velocity. An external factor is an agent that has the power to alter the resting or moving condition of a thing. It has a path and a magnitude.

Initial volume of chlorine gas = 425 L

Initial temperature = 32°C

Final volume = ?

Final temperature =  -15°C

Solution

Initial temperature = 32°C (32+273 = 305 K)

Final temperature =  -15°C (-15 +273 = 258 K)

The Charles Law will be used to resolve the presented issue.

This equation states that at constant pressure and molecular number, the volume of a given amount of a gas is precisely proportional to its temperature.

V₁/T₁ = V₂/T

V₁ = Initial volume

T₁ = Initial temperature

V₂ = Final volume

T₂ = Final temperature

We will now enter the values into the formula.

V₁/T₁ = V₂/T₂

V₂ = V₁T₂/T₁  

V₂ = 425 L× 258 K /305 K

V₂ = 109650 L.K / 305 K

V₂ = 359.5 L.

To know more about Pressure visit:

https://brainly.com/question/356585

#SPJ13

The [OH⁻] concentration is  1.9 × 10⁻² M and the  [H⁺] concentration is 3.9 × 10⁻⁸ M

a) [ H⁺ ] = 4.9 × 10⁻¹³ M

pH = - log [ 4.9 × 10⁻¹³ ]

pH = 12.3

pH + pOH = 14

pOH = 14 - 12.3 = 1.7

pOH = -log [OH⁻]

[OH⁻] = 10^-1.7

         = 1.9 × 10⁻² M

b) pOH = - log [ 2.2 × 10⁻⁷]

pOH = 6.6

pOH + pH = 14

pH = 7.4

pH = -log [H⁺]

[H⁺] = 10^-7.4

[H⁺] = 3.9 × 10⁻⁸ M

Thus, The [OH⁻] concentration is  1.9 × 10⁻² M and the  [H⁺]  concentration is 3.9 × 10⁻⁸ M

To learn more about pH and pOH here

https://brainly.com/question/17144456

#SPJ1

Among the given compounds, H[tex]_2[/tex]S dissolves in water.

The dissolution of compounds in water depends on the polarity of that compound. As water is a polar solvent, polar compounds readily dissolve in water. As it is said that Like dissolves like, we can say that polar and ionic compounds dissolve in polar solvents while, non-polar compounds dissolve in non-polar solvents like benzene, hexane, and other organic solvents.

CBr[tex]_4[/tex], C[tex]_6[/tex]H[tex]_6[/tex], and CCl[tex]_4[/tex] are non-polar compounds and cannot dissolve in water due to the absence of d-orbital in carbon atoms so they cannot accept lone pairs of electrons from water. H[tex]_2[/tex]S  is also non-polar but the presence of a large sulfur atom gets easily polarized as compared to carbon and thus it dissolves in water.

Thus, due to the presence of a Sulfur atom, hydrogen sulfide dissolves in water.

To learn more about dissolution and polarity,

brainly.com/question/20515334

Answer: CH3-CO-CH3<CH3-CH2-OH<CH3-COOH

Explanation:

basically the boiling point depends upon the intermolecular hydrogen bonding. thus alcohol tends to have a higher boiling points then ketones because they have -OH group unlike carbonyl.