Explanation:
Models do not behave exactly like the things they represent. Accuracy—In order to make models simplistic enough to communicate ideas some accuracy is lost. For example, ball and stick models of atoms do not show all the details that scientists know about the structure of the atom.
Modeling Benefits
Viewing systems from multiple perspectives.
Discovering causes and effects using model traceability.
Improving system understanding through visual analysis.
Discovering errors earlier and reducing system defects.
Exploring alternatives earlier in the system lifecycle.
if you were givin 2.50 moles of.sodium bromide, how many grams of salt do you have
Answer: 257.23
Explanation:
Explain what fertilisers are used for.
Why is it appropriate to describe the Sun and its orbiting celestial bodies as a system?
As the bodies present in the gravitational force of sun, so it is appropriate to describe the sun and its celestial bodies as system.
What are celestial bodied?Celestial bodies are those objects which are present in the space not in the land.
In the space all the planets are present in their orbitals under the gravitational force of the sun and do the motion around the sun, because of that force planets are present in the orderly arrangement. Because of the revolution of the earth around the sun, seasons will change on the earth.
Hence, it is appropriate to describe the sun and its celestial bodies as system.
To know more about celestial bodies, visit the below link:
https://brainly.com/question/3735999
Where on the periodic table are you most likely to find elements that do not react with other elements A) group 1 B) group 2 C) group 17 D) group 18
Answer:
d) group 18
Explanation:
Group 18 on the periodic table consists of noble gasses, which do not chemically interact with other elements.
Which procedure is an attempt to correct a genetic disorder by replacing a mutated gene with a normal allele?
O selective breeding
• cloning
O artificial selection
•
gene therapy
gene therapy
Explanation:
Gene therapy, also called gene transfer therapy, the introduction of a normal gene into an individual's order to repair a mutation that causes a genetic disease.
Answer:
C artificial selection
Explanation:
Brainly please
Why are substances such as coal and gasoline used as fuel sources?
A.They have high kinetic energy, which can be converted into electrical or mechanical
energy
B.They have large amounts of energy stored in the chemical bonds which can be
converted into kinetic energy when combusted
C.They are able to easily make endothermic reactions, which can be harnessed and
converted into mechanical energy
D. None of the above statements are true
Answer:
A.They have high kinetic energy, which can be converted into electrical or mechanical energy
Explanation:
The kinetic energy of the fast-moving water turns turbines, which drive generators that produce electricity. The energy in fossil fuels (coal, oil, gas) is Chemical Potential Energy.
Beryllium hydrogen carbonate is more than 3% hydrogen by mass.
True
False
The kinetic molecule theory assumes that the particles of an ideal gas
Explanation:
It is assumed that the particles of an ideal gas have no such attractive forces. The motion of each particle is completely independent of the motion of all other particles. The average kinetic energy of gas particles is dependent upon the temperature of the gas.
What are the consequences of NOT wearing a mask?
Students set up an experiment to investigate whether or not a chemical
reaction has occurred when mixing an antacid tablet with water. The results
are listed in the table. Which is not evidence that a chemical reaction has
occurred? *
Answer:
open system
Explanation:
it needs to loose mass not gain mass
Percent yield is the quantity of product actually produced compared to the quantity _______.
a. the limiting reactant
b. volatile materials
c. of expected product
d. the excess reactant
Answer:
Of expected product
Explanation:
Percent yield is the quantity of product actually produced compared to the quantity of expected product and the correct option is option C.
What is the percent yield?Percent yield is the ratio of actual yield divided by theoretical yield multiplied by 100. It gives information regarding the percentage of products formed in the reaction.
Percentage yield = Actual yield / Theoretical yield × 100
Percent yield is very important in the manufacture of products.
Percent yields are understandably less than 100%, however, percent yields greater than 100% are possible if the measured product of the reaction contains impurities that cause its mass to be greater than it actually would be if the product was pure.
Theoretical yield is the expected amount of products formed in the reaction.
Therefore, percent yield is the quantity of product actually produced compared to the quantity of expected product and the correct option is option C.
Learn more about Percent yield, here:
https://brainly.com/question/2506978
#SPJ3
How much heat, in kilojoules, is needed to raise the temperature of 236 g of silver from 8.5oC to 34.9 °C? (cAg = 0.24 J/g°C)
Answer:
1.49kJ
Explanation:
Using the formula as follows;
Q = m × c × ∆T
Where;
Q = amount of heat (joules)
m = mass (g)
c = specific heat of silver (J/g°C)
∆T = change in temperature (°C)
According to the information given in this question;
mass of Silver (Ag) = 236g
c of Ag = 0.24 J/g°C
initial temperature (T1) = 8.5°C
final temperature (T2) = 34.9°C
∆T = T2 - T1 = 34.9 - 8.5 = 26.4°C
Using Q = m × c × ∆T
Q = 236 × 0.24 × 26.4
Q = 1,495.3 Joules
Amount of heat needed to raise the temperature of Silver (Q) in kilojoules is 1495.3/1000 = 1.4953
Q = 1.49kJ
PLS HELP ASAP NO LINKS
What type of scientist studies matter and its composition?
Biologist
Chemist
Physicist
Engineer
Answer:
.biology and maybe physics
Answer:
Biologist
ExplanationBiologist Unlike the above type of scientist, geoscientists’ work involves exploring the earth and its internal environment. They study the composition, structure, and processes of the earth by being indoors and outdoors. They contribute to the discovery of mines, petroleum deposits, minerals, and other aspects of the earth.
How many moles of Co are needed to produce nine moles of CO2
Answer:
guizzes
Explanation:
guizlet
Answer:
2. 8 moles of carbon dioxide can be produced from 12.5 moles of oxygen. 1 mole of octane can be produced from 8 moles of carbon dioxide gas.
Explanation:
hope this helps :)
need these 2 answered asap pls
Answer:
im not a brain wiz but i think 20
Explanation:
what is bank?Effect of drug abuse.
- Long term effects
Chronic drug use can alter a person’s brain structure and function, resulting in long-term psychological effects, such as: depression, anxiety, panic disorders, increased aggression, paranoia, hallucinations.
- Cardiovascular disease
Stimulants, such as cocaine and methamphetamines, can damage the heart and blood vessels. The long-term use of these drugs can lead to coronary artery disease, arrhythmia, and heart attack.
- Respiratory problems
Drugs that people smoke or inhale can damage the respiratory system and lead to chronic respiratory infections and diseases. Opioids slow a person’s breathing by binding to specific receptors in the central nervous system that regulate respiration. By depressing a person’s respiration, these drugs can lead to slow breathing or heavy snoring.
- Kidney damage
The kidneys filter excess minerals and waste products from the blood. Heroin, ketamine, and synthetic cannabinoids can cause kidney damage or kidney failure.
- Liver disease
Chronic drug and alcohol use can damage the liver cells, leading to inflammation, scarring, and even liver failure.
- Overdose
Taking too much of a drug or taking multiple drugs together can result in an overdose. According to the Centers for Disease Control and Prevention (CDC), drug overdose caused 67,367 deathsTrusted Source in the United States in 2018. Opioids contributed to nearly 70% of these deaths.
How to get help:
Finding the right treatment program can be a daunting task. Here are a few things to think about when seeking treatment for drug abuse, misuse, or addiction:
consider whether inpatient or outpatient services would be the best fit
find local treatment centers using this resource from the Substance Abuse and Mental Health Services Administration
note that state-run treatment centers and programs can be free of charge
look for programs that use evidence-based treatment strategies
14. What are the different types of river in Nepal ?explain them briefly
Answer:
21
Explanation:
Calculate the pOH for a solution with a pH of 12.34. Is the Solution acidic or basic?
Answer:
1.66 basic
Explanation:
A student was in the lab testing the conductivity of different solutions. Three of the solutions were NaNO3, Ca(NO3)2, and Al(NO3)3. Which of the solutions should be the best conductor of electricity?
Answer:
Aluminium nitrate
Explanation:
[tex]Al(NO _{3}) _{3}[/tex]
This is because there are many conducting nitrate ions compared to the other electrolytes
cells, Cell Division)
1. Which of the following statements is NOT part of the cell theory?
a. Cells are the basic unit of structure and function in living things
b. All cells are produced from other cells.
C. Only animals are composed of cells.
d. All living things are composed of cells.
Answer:
c is wrong
Explanation:
If 500 mL expandable cylinder with a pressure of 500
mmHg was filled until the volume was 1.2 atm. What is the
new volume?
Answer:
0.274 L
Explanation:
Applying Boyle's law,
PV = P'V'................. Equation 1
Where P = Initial pressure, V = Initial volume, P' = Final pressure, V' = Final volume.
make V' the subject of the equation,
V' = PV/P'............. Equation 2
From the question,
Given: P = 500 mm Hg, V = 500 mL = 0.5 L, P' = 1.2 atm = 912 mm Hg
Substitute these values into equation 2
V' = (0.5×500)/912
V' = 0.274 L
Hence the new volume is 0.274 L
Given each of the following sets of values for an ideal gas, calculate the unknown quantity.
a) P = 773 mm Hg; n = 0.240 mol; T = 25 C. What is the volume (in L)?
b) V = 635 mL; n = 0.0947 mol; T = 309 K. What is the pressure (in mm Hg)?
c) P = 727 mm Hg; V = 13.3 L; n = 0.393 mol. What is the temperature (in K)?
Answer:
a. 5.77L
b. 700mmHg
c. 395K
Explanation:
Using PV = nRT we can solve these problems where:
P is pressure of the gas in atm (1atm = 760mmHg)
V is volume in liters
n are moles of the gas
R is gas constant: 0.082atmL/molK
T is asbolute temperature in K
a. PV = nRT
V = nRT/P
P = 773mmHg*(1atm/760mmHg) = 1.017atm
T = 25°C+273 = 298K
V = 0.240mol*0.082atmL/molK*298K / 1.017atm
V = 5.77L
b. PV = nRT
P = nRT/V
P = 0.0947mol*0.082atmL/molK*309K/0.635L
P = 0.9216atm * (760mmHg/1atm) = 700mmHg
c. PV = nRT
PV/nR = T
P = 727mmHg * (1atm / 760mmHg) = 0.9566atm
0.9566atm*13.3L/0.393mol*0.082atmL/molK = T
T = 395K
What is important in order for a radioisotope to provide accurate dating
results?
O A. The half-life should be similar to the age of the object.
B. The radioisotope cannot be part of a decay chain.
O C. The isotope must undergo transmutation.
O D. The item being dated must be very old.
The most important factor to be considered in order for a radioisotope to provide accurate dating simply is:
The half-life should be similar to the age of the object.
The correct answer choice is option a.
Why half-life should be similar to the age of the object in determining accurate dating of a radioisotope.Half-life of radioisotope helps in determining dating accurately simply because it helps to predict the amount of radioactive substance remaining after a given period of time.
In conclusion, it can be perfectly deduced from the explanation given above that the half-life of a radioisotope usually, frequently and most of the time helps to determine the rate at which these substances decay.
Read more on radioisotope:
https://brainly.com/question/18640165
#SPJ1
Gold can undergo transmutation. Superscript 185 Subscript 79 Baseline Upper A u right arrow Superscript 181 Subscript 77 Baseline Upper I r + Superscript 4 Subscript 2 Baseline Upper H e This type of nuclear decay is called .
Answer:
Alpha Decay
Explanation:
Answer:
The answer for this would be Alpha Decay
Explanation:
If this is a late answer I apologize but I hope others may find this helpful :)
Which of these has a bond that takes the most energy to break?
a) Brz
b) N,
c) 02
d) HCI
Answer:
Hello! Your answer would be, D) HCI
Explanation:
Hope I helped! Ask me anything if you have any questions. Brainiest plz!♥ Hope you make a 100%. Have a nice morning! -Amelia♥
How many moles of NaOH
would you have in a
sample that weighed 10g?
Answer: There are 0.25 moles of NaOH in a sample that weighed 10g.
Explanation:
Given: Mass of NaOH = 10 g
Molar mass of NaOH is 40 g/mol.
Number of moles is the mass of substance divided by its molar mass.
Therefore, moles of NaOH are calculated as follows.
[tex]No. of moles = \frac{mass}{molarmass}\\= \frac{10g}{40 g/mol}\\= 0.25 mol[/tex]
Thus, we can conclude that there are 0.25 moles of NaOH in a sample that weighed 10g.
what will litmus paper turn when it reacts with sodium nitrate?
PLZ HELP!!!!!! IN YOUR OWN WORDS PLZ! :D
Imagine your cell phone rings. Describe how the sound gets transmitted from your phone to your ear, and then, from your ear to your brain. In your response, be sure to mention the type of wave that a sound wave is, the medium the sound is transmitted through before it gets to your ear, and what happens in your ear once the sound reaches it.
Answer:
SOUND WAVE (carried by thin metal inside the phone) ⇒ELECTRICAL ENERGY (over the wire) ⇒SOUND WAVE (that is heard by someone on the side of the phone)
Explanation:
What is a sound wave?A wave that is comprised of compression and refraction, by which sound is propagated in an elastic medium such as air.
How does sound get transmitted from phone to ear?
The sound waves are carried to a thin metal disk inside the phone, known as the diaphragm, and are converted into electrical energy. The electrical energy travels over wires to another phone and is converted from electrical energy to sound waves again which can be heard by the one on the other end of the phone.
How does sound get transmitted from ear to brain and what happens when sound reaches the ear?Sound waves enter the outer ear and travel through a small passageway (ear canal), which leads to the eardrum.The eardrum vibrates from the coming sound waves and sends these vibrations to three tiny bones in the middle ear. These bones are known as the malleus, incus, and stapes.The bones present in the middle ear amplify the sound vibrations and send these vibrations to the cochlea (the snail-shaped structure that is filled with fluid present in the inner ear). An elastic separation runs from the beginning to the edge of the cochlea, splitting it into upper and lower parts. This separation is called the basilar membrane as it serves as the base on which key hearing structures sit.Once the vibrations result in the fluid inside the cochlea rippling, a traveling wave appears along the basilar membrane. Hair cells (sensory cells) sitting on top of the basilar membrane ride the wave. Hair cells near the broad end of the cochlea detect higher-pitched sounds. Those closer to the center detect lower-pitched sounds, such as a large dog barking.As the hair cells move up and down, microscopic hair-like projections (known as stereocilia) that perch on the peak of the hair cells crash against an overlying structure and bend down. Bending results in pore-like channels, which are at the tips of the stereocilia, opening up. Then chemicals rush into the cells, producing an electrical signal.The auditory nerve carries this electrical signal to the brain, which in return it into a sound that we recognize and understand.In this way, sound reaches our ears.
learn more about sound waves here:
https://brainly.in/question/100845
#SPJ2
En una muestra de jugo de limón la concentración de H1 es de 3.8x10 a la 4 potencia ¿ cual es su PH considerando que 378= 0.58
Answer:
pH = 3.42
Explanation:
Para calcular el pH necesitamos usar la siguiente expresión:
pH = -log[H⁺]
Por tanto, solo necesitamos reemplazar el valor dado de [H⁺] en la expresión anterior y se determina su pH:
pH = -log(3.8x10⁻⁴)
pH = 3.42Por tanto el pH de la muestra de jugo de limón es 3.42
Select the correct answer.
A circuit is used in which process?
OA. electricity
OB. magnetism
OC. velocity
OD. gravity
Answer:
electricity
Explanation:
A circuit is used in every electrical and electronics operation.