what are the phases of the cell cycle
directions: complete this table by writing a description in each space provided
phase of the cell cycle
phase | stage | description |
interphase | G1 | 1.
| S | 2.
| G2 |3.

mitotic phase | mitosis |4.
| cytokinesis| 5.

When placed at the same temperature, the entropy of 10 mole of Ar(g) at 10.0 atm and the 10 mole of Ar(g) at 0.5 atm. The system has a higher entropy is 10 mole of Ar(g) at 0.5 atm.

The entropy is the measure the randomness of the of the system.  the measure of the system's thermal energy per unit the temperature that is not available for doing the useful work.

The Entropy will increases with temperature at the constant pressure. The  pressure increases leads to the higher degree of the order in the molecular arrangement. so, the entropy decreases with the increasing pressure.

To learn more about entropy here

https://brainly.com/question/13999732

#SPJ4

The conductivity decreases initially as acid and base neutralize, passes through a minimum at the highest salt concentration, and then increases again as acidity increases and salt concentration decreases.

The conductivity decreases as the volume of H₂SO₄ is added to the barium hydroxide because the acid and base are neutralizing each other, forming salt and water which are poor conductors.

As the volume of acid added increases, the conductivity passes through a minimum because the salt concentration is at its highest point and then increases again as the acid and base are no longer neutralizing and the salt concentration begins to decrease.

In addition, the addition of sulfuric acid leads to the formation of more dissolved ions in solution, which increases the conductivity. The increase in concentration of these ions can be attributed to the protonation of the hydroxide ions and the formation of sulfate ions. As the acidity increases further, the conductivity increases again.

To learn more about protonation visit: https://brainly.com/question/15215343

#SPJ4

Your question seems incomplete, but I suppose the question was:

"Explain why the conductivity decreases, passes through a minimum, and then increases as the volume of H₂SO₄ added to the barium hydroxide."

The prediction of chemical reaction is CO2 and H2O are the end products of every combustion reaction involving hydrocarbons or hydrogen-carbon-oxygen molecules (assuming a complete reaction).

a. C6H12 + 9O2 6CO2 + 6H2O during combustion

b. Combustion: 8CO2 + 6H2O from 2C4H6 + 11O2

c. Combustion: 6CO2 + 5H2O + C6H10O3 + 7O2

The predicting products of chemical reactions is The ability of human chemists to predict reactions' outcomes with acceptable certainty is amazing. These forecasts are, of course, founded on fundamental physical principles, but they are unquestionably not based on meticulous numerical calculations.

For example:-

1. Mg + I2 becomes MgI2.

The product must have a 1:2 cation:anion ratio since Mg can only form Mg2+ and I can only form I-.

2. Dual displacement: CuS + 2HCl CuCl2 + H2S

Be aware that the substance is not H2Cl2. Recognizing that CuCl2 is composed of three ions—Cu2+ and two Cl-—is crucial.

3. NaOH + HClO4 NaClO4 + H2O, or double displacement

You must understand that perchlorate (ClO4-) and hydroxide (OH-) are polyatomic ions in this question and won't disintegrate. Additionally, as this is an acid-base reaction, the end products ought to be salt and water.

For more such questions on prediction, Visit:

brainly.com/question/27172907

#SPJ4

Complete question:

What is predicting product of chemical reaction.

Combustion:

a.  C6H12 + O2 =

b. Combustion: C4H6 + O2 =

c. Combustion: C6H10O3 + O2 =

In water, sodium bicarbonate dissolves to form sodium and bicarbonate which makes the solution alkaline, which means it can neutralize acid.

An acid is described as a molecule or ion capable of either donating a proton, known as a Brønsted–Lowry acid, or forming a covalent bond with an electron pair, known as a Lewis acid.

sodium bicarbonate is less soluble in water because the density of the water is more than the density of the sodium bicarbonate.

Acids are known to produce hydrogen ions and bases accept hydrogen ions.

Learn more about acids at: https://brainly.com/question/25148363

#SPJ1

The data can show us that X ,Y and Z are all esters

The law of definite proportions, also known as Proust's Law, states that a given chemical compound always contains the same elements in the same proportion by mass.

This means that no matter how a compound is obtained or prepared, its elemental composition will always be the same. For example, water is always composed of hydrogen and oxygen in a ratio of 2:1, regardless of its source or method of preparation.

The law of definite proportions is a fundamental principle of chemistry and provides evidence for the atomic theory of matter.

Learn more about esters:https://brainly.com/question/10840252

#SPJ1

Answer;

1.Arrow A represents the process of photosynthesis.

2.This shows the process of light energy converting into chemical energy

3.Photosynthesis absorbs carbon dioxide and converts it into energy as biomass, so that its able to be used for something else later on.

Explanation:

Part I

At location G, the process of combustion is taking place where hydrocarbon or organic carbon from the fossil fuel is burnt in the presence of oxygen to produce carbon dioxide and water as the products.

CxHy = CO₂ + H₂O

Part II

At point G there is no transformation of energy since during the process of combustion energy will still be stored in form of chemical energy in the bonds of carbon Iv oxide and the water produced during the reaction.

Part III

The process shows recycling of carbon in the carbon cycle. This is because carbon from living organisms is cycled to non living organisms. When plants and animals die and are buried deep in the ground, they are then slowly converted to fossil fuels which contain organic hydrocarbon compounds including petrol, kerosene and other compounds. Then the fossils are used in the industries and undergoes combustion releasing carbon iv oxide which is then released to the atmosphere and used by the plants and animals. The process starts once again.

it the same:]

Photosynthesis is a process by which plants absorb carbon dioxide from the atmosphere and use energy from the Sun to convert it into glucose.

To learn more about Photosynthesis refer to:

https://brainly.com/question/19160081

#SPJ1

The concentrations of the silver ion and chloride ion in the solution will not be affected by the addition of NaCl, as the solution is already saturated.

When a solution is saturated, it means that the maximum amount of solute (in this case, silver chloride) has been dissolved in the solvent (water) at a given temperature and pressure. Adding more solute (such as NaCl) will not cause any additional solute to dissolve, as the solution is already at its saturation point.

Therefore, the concentrations of the silver ion and chloride ion in the solution will not change as a result of adding more NaCl. It's important to note that adding more solvent (water) would decrease the concentration of the solute.

To learn more about NaCl visit: https://brainly.com/question/24878544

#SPJ4

A balanced chemical equation describes a reaction where the number of each type of atom on one side of the equation is equal to the number of the same sort of atoms on the other side of the equation.

In other words, the number of atoms of each element is the same on both sides of the equation, obeying the rule of conservation of mass.

For instance, the balanced formula for the combustion of oxygen and methane is CH4 + 2 O2 -> CO2 + 2 H2O.

On either side of the equation, there are 1 carbon atom, 4 hydrogen atoms, and 4 oxygen atoms.

The chemical equation must be in balance in order to employ the right quantity of reactants and products and to forecast how much reactant will be used and how much product will be produced.

learn more about atoms here:

https://brainly.com/question/1566330

#SPJ4

Illustration of the missing intermediate and add curved arrows for the production of phenylethyne by the double dehydrohalogenation of 2,2-dibromoethylbenzene is given in the attachment.

Dehydrohalogenation is an elimination reaction used in chemistry to get rid of a hydrogen halide from a substrate. Although the reaction is frequently linked to the synthesis of alkenes, it has additional uses.

Alkyl halides have historically served as the substrates for dehydrohalogenations. Halides without a C-H bond on an adjacent carbon are not acceptable substrates for alkyl halides because they cannot produce an alkene.

Halides made of aryl are similarly inappropriate. Chlorobenzene dehydrohalogenates when subjected to a strong base, releasing phenol through a benzyne intermediate. Many alkyl chlorides change into the equivalent alkene when treated with a strong base. It is a kind of elimination reaction and is also known as a-elimination reaction.

Learn more about dehydrohalogenation

https://brainly.com/question/29106730

#SPJ4

The energy of the electron is deposited at a point, just as if it was a particle. So while the electron propagates through space like a wave, it interacts at a point like a particle. This is known as wave-particle duality.

Only recently have scientists began to think of light as both a wave and a particle. Two major scientists that helped discover this property were Heinrich Hertz in 1887 and Albert Einstein in 1905.

Wave–particle duality is the concept in quantum mechanics that every particle or quantum entity may be described as either a particle or a wave. It expresses the inability of the classical concepts "particle" or "wave" to fully describe the behaviour of quantum-scale objects. As Albert Einstein wrote:

It seems as though we must use sometimes the one theory and sometimes the other, while at times we may use either. We are faced with a new kind of difficulty. We have two contradictory pictures of reality; separately neither of them fully explains the phenomena of light, but together they do.

Learn more about wave particle duality at https://brainly.com/question/29262224.

#SPJ4

11.87 g of CO(g) is required to completely react with 22.55 g Fe₂O₃(s) to produce 15.32 g Fe(s). The percent yield of the reaction is 97.15%.

The balanced equation for the reaction between CO(g) and Fe₂O₃(s) is:

Fe₂O₃(s) + 3 CO(g) -> 2 Fe(s) + 3 CO₂( g)

To determine how much CO is required to completely react with 22.55 g of Fe2O3, we need to use the stoichiometry of the reaction.

From the balanced equation, we know that for every 1 mole of Fe₂O₃(s) that reacts, 3 moles of CO(g) are consumed. To convert mass to moles, we use the molar mass of Fe₂O₃(s), which is 159.69 g/mol.

22.55 g Fe2O3 / 159.69 g/mol = 0.1412 moles of Fe2O3

From the balanced equation we know that for every 1 mole of Fe₂O₃(s), 3 moles of CO(g) is required, so we can calculate the moles of CO(g) needed for the reaction:

0.1412 moles Fe₂O₃(s) (3 moles of CO(g) / 1 mole of Fe₂O₃(s)) = 0.4236 moles of CO(g)

To get the mass of CO(g), we can convert the moles to grams using the molar mass of CO(g), which is 28.01 g/mol.

0.4236 moles of CO(g)(28.01 g/mol) = 11.8660 = 11.87 g of CO(g)

To find the % yield, we divide the actual yield (15.32 g Fe(s)) by the theoretical yield (mass of Fe(s) produced from all the Fe₂O₃(s) consumed) and multiply by 100.

Theoretical yield of Fe(s) = mass of Fe₂O₃(s)  consumed(mass of Fe(s) produced from 1 mol Fe₂O₃(s)  / mol of Fe₂O₃(s)  consumed)

= 22.55 g Fe₂O₃(s) (55.85 g Fe(s) / mol Fe(s)) (2 mol Fe(s) / 1 mol Fe₂O₃(s)) (1 mol Fe₂O₃(s) / 159.69 g Fe₂O₃(s)) = 15.77 g Fe(s)

% yield = (15.32 g Fe(s) / 15.77 g Fe(s)) x 100 = 97.15%

So, 11.87 g of CO(g) is required to completely react with 22.55 g Fe₂O₃(s) to produce 15.32 g Fe(s) and the % yield of the reaction is 97.15%.

Learn more about percent yield here: https://brainly.com/question/27918618

#SPJ4

Answer: the direction of decreasing temperature

Answer:

How are the spheres of Earth interrelated? The four spheres of Earth are closely connected to each other. Birds(biosphere) fly through the air (atmosphere), and water (hydrosphere) flows through the soil (lithosphere or geosphere). The spheres of the earth are closely connected to each other.

Using Boyle's law, As pressure is decreased, the volume will increase.

Boyle's Law describes how pressure and volume relate when the temperature is constant.

P1V1 = P2V2

When temperature is kept constant in this equation, pressure and volume have an inverse relationship.

When the volume is reduced, molecules have less room to move and collide more frequently, which raises the pressure. If the volume is increased, the molecules have more room to move, collisions occur less frequently, and the pressure is reduced.

The combined gas law, however, governs the connection between the three quantities when temperature is included.

As the gas volume decreases, the molecules hit the walls more frequently, raising the pressure; conversely, as the volume grows, the molecules must travel farther to contact the walls, reducing the frequency with which they do so and raising the pressure.

According to Boyle's law, a gas's pressure tends to decrease as its volume rises.

To learn more about Boyle's Law from given link

https://brainly.com/question/1696010

#SPJ1

The polarity of a molecule is significantly impacted by its shape. A molecule that contains polar bonds may still be nonpolar if the molecule is symmetrical and the individual bond dipoles cancel.

The distribution of electric charge in a molecule is referred to as polarity. A dipole moment is produced by the positive and negative charge areas that coexist in a molecule having polar links. The individual bond dipoles will cancel out each other if the molecule is symmetrical, which ensures that the positive and negative charges are distributed equally. Even though the molecule in this instance has polar bonds, it will nonetheless be nonpolar. However, if a molecule is not symmetrical or contains strongly electronegative atoms like fluorine or oxygen, the bond dipoles will not cancel each other out, resulting in polarity.

To know more about Polarity:

brainly.com/question/30002497

#SPJ4

The actual question is:

The geometry of a molecule has an important consequence for its polarity. a molecule that contains polar bonds may still be nonpolar, if

a) the molecule is symmetrical and the individual bond dipoles cancel.

b) the molecule contains atoms other than oxygen or fluorine, which are highly electronegative.

c) the molecule is sufficiently small that the individual bond dipoles are insignificant.

d) the molecule is sufficiently small that the single bond dipoles are significant.

Water without much Calcium and Magnesium is known as Soft water.

Soft water has low concentration of Calcium carbonate and other ions. These are free from dissolved salts of metals like Calcium, Magnesium and other metals.

Hard water and soft water are differentiated based on their amount of Calcium and Magnesium constituents. Hard water has mineral stains , spots and feeling a film in your hands while washing it.

Soft water makes our clothes cleaner , water pressure heavily in the hands and a slight of Sodium taste in drinking water.

To learn more about soft and hard water,

https://brainly.com/question/20936443

Answer: to keep it strong

Explanation:

Isotopes are atoms that belong to the same element: 11 protons, 10 neutrons, 11 electrons, 13 protons 14 neutrons, and 13 electrons

An isotope is one of two or more atom types of a chemical element that share the same atomic number, position on the periodic table, chemical behavior, and physical properties, but differ in atomic mass. One or more isotopes can be found in any chemical element. The number of protons in an atom's nucleus is the first criterion for determining its identity and labeling.

The observation that all atoms with the same atomic number have roughly the same chemical properties—if not exactly the same—gives this atomic number its significance. The symbol Z is typically used to represent this number. An ingot of pure uranium, for instance, only contains atomic number 92 atoms. Each atomic number has a place on the periodic table of elements, and each of these places is labeled with the element's common name, like calcium, radon, or uranium.

Learn more about isotopes :

brainly.com/question/28039996

#SPJ1

The doctor may recommend taking a thorough medical history, including current symptoms and past illnesses, before giving a prescription. They may also recommend diagnostic tests such as bloodwork or imaging to help inform treatment decisions. Microscopy is often used in the diagnostic process for conditions such as infections or cancers.

When a patient is sick, a doctor will typically take a thorough medical history and perform a physical examination before determining the best course of b. Depending on the condition, the doctor may also order laboratory tests, imaging studies, or other b tests to help make a diagnosis.

One example of a situation where focusing a microscope is useful is in the diagnosis of a bacterial infection. A doctor may take a sample of the patient's infected tissue or fluid (such as blood or urine) and use a microscope to examine it for the presence of b. The doctor can then use the information obtained from the microscope to determine the type of bacteria causing the infection and the most appropriate antibiotic to treat it.

Another example is in pathology. Pathologists use microscopes to examine tissue samples taken during biopsies or surgeries to diagnose or confirm a wide variety of diseases, including cancer. The microscope allows them to see the structure and organization of cells and tissues at a high level of detail, enabling them to identify abnormal cells or changes that may indicate the presence of a disease.

In addition, Microscopy is widely used in the field of research, particularly in the field of Biology and Medicine, providing a key tool for advancing our understanding of the structure, function, and interactions of cells, tissues, and organisms.

Learn more about microscopy  here:

https://brainly.com/question/17083896

#SPJ4

The ionic bonds in sodium chloride is the strongest bond as such the substance has the highest boiling point while the mercury has the weakest bond and the least melting point.

We have to note that the melting point of the solid has to do with the temperature at which the solid is converted into the liquid state. It is the temperature at which the bonds that are holding the particles of the substance would be broken.

In this case, we can see that the trends in the boiling points does reveal the kind of bonding intercation that we have in the compound. Given that there are strong ionic bonds in sodium chloride it has the highest boiling point.

Learn more about melting points:https://brainly.com/question/29578567

#SPJ1

The electronic configuration of the elements Si and Y in noble-gas notation is given below:

The arrangement of an atom's or molecule's electrons in their respective orbitals is known as its electron configuration.

The electronic configuration of Si and Y are derived from their atomic numbers.

The atomic number of Si is 14

The atomic number of Y is 39

The electronic configuration of Si is 1s²2s²2p⁶3s²3p²

or [Ne] 3s²3p⁴ in noble-gas notation.

The electronic configuration of Y is 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁶4d¹5s²

or [Kr] 4d¹5s² in noble-gas notation.

Learn more about electronic configuration at: https://brainly.com/question/26084288

#SPJ1

The fact that California is surrounded by water  makes is cooler than Sacramento that is surrounded by land.

We have to note that the features that surround an area is a key factor is determining whether or not the place would be warm or cold. If a place is surrounded by water, the convection of the air would lead to land and sea breeze and make the place to be cooler.

On the other hand for the places that have been surrounded by land, we would notice that the temperature of those areas would tend to be much higher than the islands.

Learn more about California:https://brainly.com/question/14317404

#SPJ1

Answer:
Answer 1: The mass of magnesium contained in the compound is 0.57g, which can be determined by subtracting the mass of the crucible and lid (31.064g) from the mass of the crucible, lid, and magnesium ribbon (31.634g).

Answer 2: The mass of oxygen contained in the compound is 1.39g, which can be determined by subtracting the mass of the crucible, lid, and magnesium oxide (31.970g) from the mass of the crucible and lid (31.064g).

Answer 3: The change in mass between the two can be accounted for by the reaction of the magnesium with oxygen to form magnesium oxide.

Answer 4: The number of moles of magnesium is 0.0995 (2.39/24) and the number of moles of oxygen is 0.0868 (1.39/16). Dividing the moles of each element by the smallest amount of moles (0.0868) results in a simplest ratio of 1:1. Therefore, the empirical formula of magnesium oxide is MgO.

Answer 5: The known formula for magnesium oxide is MgO, which is the same as the empirical formula determined in question 4.

To determine the exact value of pK2 in this case, we can use the relationship between pH and pK, which states that the pH of a solution is equal to the pK of the acid with the lowest concentration when the acid and its conjugate base are in equilibrium.

Here, we know that the pH of the solution dropped from 8.00 to 3.20 after the addition of HCl. We can assume that the second group is now in the acid form since we know that the first ionizable group has a pK of 3.8, and the second group (pK2) is between 7 and 10, we can assume that the second group is now in the acid form.

We can use the relationship between pH and pK to calculate the exact value of pK2:

pH = pK2 = pKw / [H+] = 14.00 - log([H+])

3.20 = 14.00 - log([H+])

Solving for [H+], we find that [H+] = 1.0 x 10^-3.2

Now we can find the value of pK2 as:

pK2 = 14.00 - log(1.0 x 10^-3.2) = 14.00 - (-3.2) = 14.00 + 3.2 = 17.2

Therefore, the exact value of pK2 is 17.2.

Learn more about Equilibrium here: https://brainly.com/question/28527601

#SPJ4

Hey there!

Topic for Discussion - Work

What is "work" when it comes to Physics?"

In physics, work is the energy transferred to or from an object via the application of force along a displacement. In short, it is the force applied to an object over distance.

The formula for work is [tex]W=Fs[/tex].

Given the scenario above, there is "a force of 7 N on a stalled motorbike for a distance of 5 meters (m)". Now, we have to "determine the amount of work" that is being done during this

Knowing our formula for work, simply apply the given data in the scenario using the formula to determine the work being done.

[tex]W=Fs[/tex]

[tex]F=7[/tex]

[tex]s=5[/tex]

[tex]W=7*5[/tex]

[tex]W=35[/tex]

Hence, the work being done in the given scenario would be 35.

__________________________________________________

Hope this helps! If you mark Brainliest, TYSM! :D

Answer: The main light elements that can be produced in stars is helium. the heaviest part that can be produced in giant stars is iron.

what are the physical properties of iron?

The physical properties of iron include iron is a heavy metal with a density of 7.9 g/cc, It is a lustrous metal, greyish white in colour.

Iron is highly malleable and ductile which is a good conductor of heat and electricity.

Iron can be magnetized and It melts at 1536 degrees Celcius and boils at 2861 degree Celsius, dissolved readily in dilute acids.

Answer:

waves that move through only solids and they are slower than P-Waves and they travel in an S type motion(cannot go through outer core because it is liquid)

Explanation:

The subatomic particle is not indicated by the atomic number of a neutral atom is neutron.

The subatomic particles is the particles that atom is composed of. The subatomic particles is given as :

The atomic number of the neutral atom is equals to the number of the protons. The number of protons is equals to the number of electrons for the neutral atom. The mass number is equal to the number of protons + number of neutrons.

Thus, the number of neutrons is the subatomic particle that is not indicated by the atomic number of a neutral atom.

To learn more about subatomic particles here

https://brainly.com/question/11083762

#SPJ4