Answer:
It can be improved by:
a) Adding METHANOL
b) Adding BUTANOL
c) Adding ETHANOL.
Explanation:
hope it helps.
How does increasing temperature increase the number of reactions
Answer:
A
Explanation:
the increase in the temperature let's the particles to collide more so it increases the rate of reaction.
Answer:
I think the answer is option A.
Explanation:
Because when the temperature increases, the kinetic enegry increases which creates the effective collisions which lets the chemical to react.
Hope it helps..
Seawater is highly saline, which means it contains large amounts of dissolved salt. When seawater freezes and icebergs form, the water in the iceberg doesn’t take the salt with it. What effect will this phenomenon have on the concentration of salt in the water around the iceberg?
Answer:
Because the amount of liquid water decreases and the amount of dissolved salt remains constant, the concentration of salt in the liquid water around the iceberg will increase.
Explanation:
Answer:
Because the amount of liquid water decreases and the amount of dissolved salt remains constant, the concentration of salt in the liquid water around the iceberg will increase.
Explanation:
PLATO exact answer
How would you measure the mass and weight of an object?
Answer:
Weight = mass × earth's gravitational acceleration
Explanation:
Follow the following steps to measure the mass and weight of an object:
Measure the mass of the object using an accurate measuring scale.Multiply the mass of that object with earth's gravitational acceleration which is approximately 9.8 N/kgLabel the following as either an Element, Compound, or Mixture.
Answer:
27. Element (Because it contains all same atoms)
28. Compound (It contains atoms held together through chemical bonds)
29. Element (it contains all same atoms)
33. Mixture (It contains different atoms but they are not held together through chemical means)
34. Compound (Different atoms held together through chemical means)
35. Mixture (Mixture of elements and compounds)
30. Element (it contains all same atoms)
31. Mixture (Mixture of elements and compounds)
32. Element (Contain all same atoms although held together through chemical means they are not compounds)
Which of the following is the best explanation for why it is important to follow lab safety guidelines
a. Following laboratory safety guidelines prevents all lab accidents.
b. Following laboratory safety guidelines minimizes the chance of lab ac
C. Following laboratory safety guidelines prevents fires.
d. Following laboratory safety guidelines allows quick response during la
Please select the best answer from the choices provided
Answer:
B
Explanation:
The main aim of lab rules is to minimize the no of accidents
What happens to water 100°C as pressure is increased from 0.7 atm to 1.4 atm
Answer:
Explanation:
The graph shows the phase diagram of water . From it , it is clear that at 100°C water remains in equilibrium with water vapour and at this temperature , the vapour pressure is equal to one atm . So this must be boiling point of water.
At 0.7 atm pressure , boiling point must have been reduced . So when water is at 100°C , it must have been completely in vapour phase .
Now the pressure is increased to 1.4 atm . In this process of increase of pressure , the water in vapour state must have turned into liquid state as soon as the pressure increases beyond 1 atm . Beyond it its boiling point would have increased above 100°C so it can not remain in gaseous phase . At 1.4 atm , its boiling point would have increased to 110°C or so . Hence it must be in liquid phase because its temperature is below its boiling point at that pressure .
Hence water changes from gaseous phase to liquid phase when pressure changes from 0.7atm to 1.4 atm .
How many moles of ZnCl2 will be produced from 61.0 g of Zn, assuming HCl is excess?
Answer: 0.938 moles of [tex]ZnCl_2[/tex] will be produced.
Explanation:
To calculate the moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text {Molar mass}}[/tex]
moles of zinc:
[tex]\text{Number of moles}=\frac{61.0g}{65g/mol}=0.938moles[/tex]
[tex]Zn+2HCl\rightarrow ZnCl_2+H_2[/tex]
As HCl is in excess , zinc is the limiting reagent and it limits the formation of product.
According to stoichiometry :
1 mole of Zn produce = 1 mole of [tex]ZnCl_2[/tex]
Thus moles of Zn produce = [tex]\frac{1}{1}\times 0.938=0.938[/tex] moles of [tex]ZnCl_2[/tex]
Thus 0.938 moles of [tex]ZnCl_2[/tex] will be produced.
Name the hydro carbon.... I really need your help guyz
Answer:
The given hydrocarbon is Butanol
To make a table of elements, dmitri
The question is incomplete, the complete question is;
To make a table of the elements, dimitri Mendeleev sorted the elements according to their?
Answer:
Atomic weights
Explanation:
Dimitri Medeleeve is a Russian scientist who worked assiduously on the project of developing a system of classifying all the elements. His periodic table was filled with spaces as many atoms weren't yet discovered. 'Eka' prefix was used to name some elements whose properties closely resembled that of their predecessors in Mendeleev's system of classification.
The dependence of the atomic properties on the weight of the atom was the basis for Mendeleeves' original classification. According to Medeleeve, elements having similar chemical properties are also expected to have similar atomic weights and their atomic weights was found to increase regularly.
The Mendeleeve concept of periodic arrangement of elements is the closest precursor of the modern periodic table as it is used in chemistry. Mendeleev arranged the elements in order of increasing relative atomic mass .
How many moles are in 10.23 g of PO4-3? How many moles are 8.25 x 10^28 molecules of Na2CO3? What is the mass of 6 moles of CH2O? How many formula units are in 6.34 g of NaCl? How many ions are in 0.25 moles of Cu+2? How many grams are in 3.4 x 10^24 molecules of CH4? How many moles are in 10 mL of water (density of water = 1 g/mL)? (sorry for so many questions in one)
Answer:
1) 0.1077 moles
2) 137043.2 moles
3) 180.186 grams
4) 6.53×10²² molecules or formula units
5) 1.505×10²³ ions
6) 90.626 grams
7) 0.555 moles
Explanation:
1) The number of moles, n = Mass of the substance/(Molar mass of the substance)
The molar weight of PO₄⁻³ is 94.971 g/mol
The number of moles in 10.23 g of PO₄⁻³ is n =10.23/94.971 = 0.1077 moles
The number of moles in 10.23 g of PO₄⁻³ = 0.1077 moles
2) The number of molecules of Na₂CO₃ in one mole of Na₂CO₃ is given by the Avogadro's number, [tex]N_A[/tex] = 6.02 × 10²³ molecules
Therefore, the number of moles in 8.25 × 10²⁸ molecules of Na₂CO₃ is found by determining how many Avogadro's number of molecules are in 8.25 × 10²⁸ molecules of Na₂CO₃ as follows;
The number of moles in 8.25 × 10²⁸ molecules of Na₂CO₃ = (8.25 × 10²⁸)/(6.02 × 10²³) = 137043.2 moles
The number of moles in 8.25 × 10²⁸ molecules of Na₂CO₃ = 137043.2 moles
3) The molar mass of CH₂O = 30.031 g/mol
Therefore, the mass of 6 of CH₂O = 6 moles × 30.031 g/mol = 180.186 grams
The mass of 6 of CH₂O = 180.186 grams
4) The molar mass of NaCl = 58.44 g/mol
The number of moles of NaCl in 6.34 g of NaCl 6.34/58.44 = 0.1085 moles
1 formula unit of NaCl = 1 molecule of NaCl
The number of molecules in one mole of a substance = [tex]N_A[/tex] = 6.02 × 10²³
Therefore, the number of molecules in 0.1085 moles of NaCl = 6.02 × 10^(23) × 0.1085 = 6.53×10²² molecules or formula units
5) The number of ions per mole of any substance is give by Avogadro's number, [tex]N_A[/tex] = 6.02 × 10²³ ions,
The number of ions in 0.25 moles of Cu⁺² = 0.25×6.02 × 10²³ ions = 1.505×10²³ ions
The number of ions in 0.25 moles of Cu⁺² = 1.505×10²³ ions
6) The molar mass of CH₄ = 16.04 g/mol
The number of moles, n, in 3.4×10²⁴ = 3.4×10^(24)/(6.02×10^(23)) = 5.65 moles 5.65*16.04
The mass of 5.65 moles of CH₄ = 5.65 moles × 16.04 g/mol = 90.626 grams
The mass of 3.4×10²⁴ molecules of CH₄ = 90.626 grams
7) The density of water = 1 g/mL
The volume of the water 10 mL
The mass of the water = Volume × Density = 10 mL × 1 g/mL= 10 grams
The molar mass of water = 18.015 g/mol
The number of moles of water in 10 g of water = mass/(Molar mass) = 10/18.015 = 0.555 moles.
Which of the following would NOT be a conversion factor for mole to mole calculations for the following reaction: 2Al + 3Cl2 --> 2AlCl3
A: 3 mol Cl2 3 mol Al
B: 2 mol Al 3 mol Cl2
C: 2 mol AlCl3 2 mol Al
D: 3 mole Cl2 2 mol AlCl3
Answer: A. 3 mol [tex]Cl_2[/tex] 3 mol Al:
Explanation:
Te given balanced chemical equation is :
[tex]2Al+3Cl_2\rightarrow 2AlCl_3[/tex]
According to the stochiometry :
A: 3 mol [tex]Cl_2[/tex] 3 mol Al:
3 moles of chlorine reacts with 2 moles of aluminium
B. 2 mol [tex]Al[/tex] 3 mol [tex]Cl_2[/tex]:
2 moles of aluminium reacts with 3 moles of chlorine
C. 2 mol [tex]AlCl_3[/tex] 2 mol Al
2 mol of aluminium produces 2 mol of [tex]AlCl_3[/tex]
D. 3 mol [tex]Cl_2[/tex] 2 mol [tex]AlCl_3[/tex]
3 moles of chlorine produces with 2 moles of [tex]AlCl_3[/tex]
Thus the conversion factor not used for mole to mole calculations is 3 mol [tex]Cl_2[/tex] 3 mol Al:
What is the molarity of 0.25 moles of FeCl3 dissolved in 120 ml of solution?
Answer:
Molarity = 2.0833 M (Approx)
Explanation:
Given:
Number of moles (n) = 0.25
Volume of solution = 120 ml = 0.12 L
Find:
Molarity
Computation:
Molarity = Number of moles (n) / Volume of solution.
Molarity = 0.25 / 0.12
Molarity = 2.0833 M (Approx)
If the external vapor pressure is 2.0 atm , what is the vapor pressure of the water at its boiling point?
Answer:
22
Explanation:
22
A 2.5-liter sample of a gas has 0.30 mole of the gas. If 0.15 mole of the gas is added, what is the final volume of the gas? Temperature and pressure remain constant. 3.4 liters 3.8 liters 4.2 liters 4.7 liters
Answer:
3.75 ltrs
Explanation:
The final volume of the gas is 3.8L.
What is volume?Volume is the quantity of space occupied by a liquid, solid, or gas.
Using Avogadro's law.
Avogadro's Law:
According to Avogadro's law an equal volumes of all gases, at the same temperature and pressure, have the same number of molecules. For a given mass of an ideal gas, the volume and amount (moles) of the gas are directly proportional if the temperature and pressure are constant.V₁/n₁=V₂/n₂
Where V₁ = initial volume
V₂ = final volume
n₁ = initial amount of gas in moles
n₂ = final amount of gas in moles
Avogadro's Law explains when the temperature and pressure are kept constant, volume is directly proportional to gas amount in moles, which means when the volume increases, the amount of gas also increases.
V ∝ n
V₁/n₁ = V₂/n₂
V₁ = 2.5L, V₂ = ?, n₁ = 0.30 mol, n₂ = 0.45 mol
substituting the above values in the equation,
2.5L/0.30 mol = V₂/0.45 mol
V₂ = 1.125/0.30 mol
V₂ = 3.8L
Hence, 3.8L is the final volume of the gas.
To learn more about Avogadro's law here
https://brainly.com/question/17141593
#SPJ2
Plz solve mcqs#04 with full detailed.note
Answer:
The correct option is;
(B) 1 s², 2s², 2p⁶, 3s², 3p³
Explanation:
The electron configuration is the outline of the electron arrangement about a nucleus
In the systemic pattern of electron arrangement within an atom, there are, s, p, d, f orbitals
The maximum number of electrons in an s, p and d orbital = 2, 6, and 10 respectively
Based on Aufbau's principle the electrons are arranged based on the order of their energy level
The charge is presented by the number of electrons in the outermost shell, an element able to form an ion of charge of -3 will gain 3 electrons to complete its outermost shell
Among the options given, option B is the only option that has the capacity to take the electrons to complete the number of electrons in the p orbital outermost shell to 6 from 3, that is 3p³ + 3e⁻→ 3p⁶.
Easyyyyy plz ...................
Permanent hardness of water is caused by dissolved :-
A) CaCl
B) Ca(HCO3)2
C) Mg(HCO3)2
D) NaOH
Answer:
The answer is B
Explanation:
Answer:
Hello!
Your answer is B) Ca(HCO3)2!!
Explanation:
Hope this helps you!!
itsMATT04
:>
You are given a mixture of sand, sugar and sulphur. Give the method you will use to separate the three constituents. ___________
Answer:
1:put these in sneaker and add water since sulphur is insoluble and the sugar will dissolve and the sand will settle obtain the sulphur
2:filter the mixture of sand and sugar solution to obtain the sand as residue and solution as filtrate
3:using an evaporating dish evaporate sugar solution to saturation not dryness to get crystals.
Below are 5 sets of potential solutes for you to compare. Both members of each pair are very soluble in water. If you had equal molar concentrations of each solution, which member of each pair would theoretically be the better conductor of electricity?
A. CsCl, CaCl2.
B. CaS, Li2S.
C. KBr, AlCl3.
D. AlCl3, MgC2.
E. KI, K2S.
Answer:
Option D. AlCl₃, MgC₂
Explanation:
We need to dissociate all the salts, to determine the i. (Van't Hoff factor).
The salt who has the highest value, will be the better conductor of electricity
CsCl → Cs⁺ + Cl⁻ i = 2
CaCl → Ca²⁺ + Cl⁻ i = 2
CaS → Ca²⁺ + S⁻² i = 2
Li₂S → 2Li⁺ + S⁻² i = 3
KBr → K⁺ + Br⁻ i = 2
AlCl₃ → Al³⁺ + 3Cl⁻ i = 4
MgC₂ → Mg²⁺ + 2C⁻ i = 3
KI → K⁺ + I⁻ i = 2
K₂S → 2K⁺ + S⁻² i = 3
The biggest i, is in pair D.
Answer:
Look at the Screenshot!!!
Explanation:
Got it right on Odessyware ;) Have a nice day!!!!!
What letter represents the enthalpy of reaction?
Answer:
Option D. T
Explanation:
Enthalpy change (ΔH) is simply the difference between the heat content of the product (Hp) and the heat content of the reactant (Hr). Mathematically, it is expressed as:
Enthalpy change (ΔH) = Heat of product (Hp) – heat of reactant (Hr)
ΔH = Hp – Hr
From the diagram given above, the difference between the heat content of product and the heat content of reactant is T.
Therefore, the enthalpy change of the reaction is T.
The freezing point of pure chloroform is -63.5°C, and its freezing point depression constant is 4.07°C•kg/mol. If the freezing point of a solution of benzoic acid in chloroform is -70.55°C, what is the molality of this solution? 0.58 m 1.7 m 16 m 17 m
Answer: The molality of this solution is 1.7 m
Explanation:
Depression in freezing point:
[tex]T_f^0-T^f=i\times k_f\times m[/tex]
where,
[tex]T_f[/tex] = freezing point of solution = [tex]-70.55^0C[/tex]
[tex]T_f^0[/tex] = freezing point of pure chloroform = [tex]-63.5^0C[/tex]
[tex]k_f[/tex] = freezing point constant of benzene = [tex]4.07^0Ckg/mol[/tex]
m = molality
i = Van't Hoff factor = 1 (for non-electrolyte)
[tex]-63.5-(-70.55)^0C=1\times 4.07^0Ckg/mol\times m[/tex]
[tex]7.05=1\times 4.07^0Ckg/mol\times m[/tex]
[tex]m=1.7[/tex]
Thus the molality of this solution is 1.7 m
You combine 13 g of magnesium with 5 g of nitrogen to form a compound.
What is the mass percent of nitrogen in the compound?
Answer:
[tex]\large \boxed{28 \, \% }[/tex]
Explanation:
magnesium + nitrogen ⟶ Product
13 g 5 g
Mass of product = 13 g + 5 g = 18 g
The product contains 5 g of nitrogen .
[tex]\text{Percent N} = \dfrac{\text{5 g}}{\text{18 g}} \times \, 100\% = \mathbf{28 \, \%}\\\text{The percent by mass of nitrogen is $\large \boxed{\mathbf{28 \, \% }}$}[/tex]
For the α anomer of a D-sugar, the anomeric hydroxyl in a Haworth projection Group of answer choices has an upward projection (on the same side as the terminal CH2OH group). has a downward projection (on the opposite side from the terminal CH2OH group).
Answer:
The answer is "choice 2".
Explanation:
Its glycosidic fruit juice facility would be a chromosomal hydrogen bond and an aldehyde (or acetone) team generated from the intramolecular creation of the acetals (or ketal).
Its two heterocycles created at the anomeric core from of the 2 potential stereochemical are named anomers, that's why choice "has a downward projection (from terminal CH2OH party on the opposite side)" is correct.
An antacid tablet has a pH of about 9.5 which
means it is considered to be in the _____
range.
Acidic or basic
Answer:
Basic
Explanation:
The pH scale is a scale that tells us about the concentration of hydrogen ions in a solution.
Acids have many hydrogen ions. Acids have a pH of less than 7.
Bases have fewer hydrogen ions and more hydroxide ions. Bases have a pH of less than 14.
If the solution has a pH of exactly 7, then it is pure water. Water has the same concentration of hydrogen and hydroxide ions.
The antacid tablet has a pH of roughly 9.5 Since this is less than 14, but not equal to or less than 7, this must be an base. Therefore, it is considered to be in the basic range.
Answer:
9.5 is a base
Explanation:
A ph of less than 7 is an acid
7 is neutral
7 to 14 is a base
9.5 is a base
Ascorbic Acid is a organic compound with formula C6H8O6, originally called Hexuronic Acid. It's a white solid, but impure samples can be yellowish. It dissolves well in water to give mildly acidic solutions. It is a mild reducing agent.
What is the other name of Ascorbic Acid?
Explanation:
ascorbic acid is lemon
lemon contain ascorbic acid....
it is organic acid.....
Which statement accurately describes a light-year
Answer:
B. distance light travels in a year
got it on edge :)
The statement which accurately and best describes a light-year is the total distance which light travels in a complete year
What is velocity of light?Velocity of light can simply be defined as that fundamental constant that represents the speed of electromagnetic radiation in a vacuum.
The velocity of light = 2.9979 × 10^10cm/s
So therefore, the statement which accurately and best describes a light-year is the distance which light travels in a complete year
Learn more about light-year:
https://brainly.com/question/1224192
#SPJ2
What is the unit charge on each subatomic particles
Answer:
Protons, Electrons, Neutrons
Explanation:
Neutron: 0 or Neutral
Electron: -1 or Negative
Proton: +1 or Positive
For proton and neutron look at neutr for neutral and p for positive
Answer:
❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
The answer is Protons, Electrons, Neutrons
There is three of them.....
Hope this will help you
❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
Explanation:
For which of the following reactions will a decrease in pressure shift the equilibrium to the left?
A). 2A2 (g) + B2 (g) --> 2A2B (g)
B). 2AB (g) --> A2 (g)+ B2 (g)
C). 2A2F3 (g) --> 4A (g) + 3F2 (g)
D). 2B (s) + 2HA (aq) --> 2BA (aq) + H2 (g)
Answer: I just took the test, the answer is A.
Explanation:
Magnesium unites completely and vigorously with oxygen to form magnesium oxide, which contains 60% magnesium by weight. If 1.00 gram of magnesium is sealed in a glass tube with 1.00 gram of oxygen, what will be present in the tube after the reaction has taken place
Answer:
After the reaction, there will 0.60 g of magnesium oxide and 0.25 g of oxygen gas present in the tube
Explanation:
Equation of the reaction between magnesium and oxygen is given as follows:
2Mg(s) + O₂(g) ---> 2MgO(s)
From the equation of reaction, 2 moles of magnesium reacts with i mole of oxygen gas to produce 1 mole of magnesium oxide
molar mass of magnesium is 24.0 g; molar mass of oxygen gas = 32.0 g; molar mass of magnesium oxide = 40.0 g
Therefore 24 g of magnesium reacts with 32 g of oxygen gas
I.00 g of magnesium will react with (24.0 / 32.0) * 1.00 g of oxygen = 0.75 g of oxygen gas.
Therefore, magnesium is the limiting reagent. Once it is used up, the reaction will stop and the excess oxygen will be left in the tube together with the product, magnesium oxide.
mass of excess oxygen = 1.00 - 0.75 = 0.25 g
mass of magnesium oxide formed = (24.0 / 40.0 g) * 1 = 0.60 g
g When a 2.75g sample of liquid octane (C8H18) is burned in a bomb calorimeter, the temperature of the calorimeter rises from 22.0 °C to 41.5 °C. The heat capacity of the calorimeter, measured in a separate experiment, is 6.18 kJ/°C. Determine the ΔE for octane combustion in units of kJ/mol octane.
Answer:
The correct answer is 5021.25 kJ/mol octane
Explanation:
The heat absorbed by the calorimeter is given by:
heat absorbed = Ccal x ΔT
Given:
Ccal = 6.18 kJ/ºC (heat capacity of calorimeter)
ΔT= Final temperature - initial temperature = 41.5ºC-22.0ºC = 19.5ºC
We first calculate the heat absorbed:
heat absorbed = 6.18 kJ/ºC x 19.5ºC = 120.51 kJ
The change in internal energy (ΔE) is equal to the heat absorbed by the calorimeter. In order to determine ΔE in kJ/mol we have to divide the heat into the number of moles of octane (C₈H₁₈) burned in the calorimeter.
Molecular weight (C₈H₁₈) = (12 g/mol x 8) + (1 g/mol x 18) = 114 g/mol
Moles of C₈H₁₈= mass/molecular weight= (2.75 g)/(114 g/mol)= 0.024 moles
Finally, we calculate ΔE:
ΔE = heat absorbed/moles of octane = (120.51 kJ)/(0.024 mol octane) = 5021.25 kJ/mol octane
MARKING BRAINLIEST!! - Chlorine reacts with methane to form gaseous hydrogen chloride and chloromethane according to the following equation: Cl2 (g) + CH4 (g) → HCl (g) + CH3Cl (g) If 100 mL of chlorine reacted with excess methane at constant pressure and temperature, what volume of chloromethane would be formed? Question 7 options: 50, cannot tell from the information provided, 200, 100
Answer:
100mL of chloromethane
Explanation:
Based on the equation:
Cl₂(g) + CH₄(g) → HCl(g) + CH₃Cl(g)
1 mole of chlorine reacts per mole of methane to produce 1 mole of HCl and 1 mole of chloromethane
Avogadro's law says that equal volumes of all gases, at the same temperature and pressure, have the same number of molecules. Using Avogadro's law we can say of the equation that:
1 mL of chlorine reacts per mL of methane to produce 1 mL of HCl and 1 mL of chloromethane
Because the system stays under constant pressure and temperature.
As 100mL of Cl₂ reacts with excess of CH₄ and 1mL of Cl₂ produce 1mL of CH₃Cl there are produced:
100mL of chloromethane