what area of the mirror is used to reflect the rays entering one eye from a point on the tip of your nose if your pupil diameter is 4.8

The speed of the particle at x = 8.0 m is 9.30 m/s.

We can solve this problem using the work-energy theorem, which states that the net work done on an object is equal to its change in kinetic energy,

W_net = ΔK

Where W_net is the net work done by all forces acting on the object, and ΔK is the change in kinetic energy of the object.

In this case, the only force acting on the particle is F(x) = 3x N, which is a conservative force, so the net work done by this force can be expressed as the negative gradient of a potential energy function:

W_net = -ΔU

Where ΔU is the change in the potential energy of the particle.

Since F(x) = -dU/dx, we can integrate both sides with respect to x to find the potential energy function:

[tex]U(x) = -\int F(x) dx\\= -\int 3x dx[/tex]

= -1.5x² + C

where C is an arbitrary constant of integration. To determine the value of C, we can use the fact that U(x) is defined up to an arbitrary constant, so we can set U(3) = 0:

U(3) = -1.5(3)² + C = 0

C = 13.5

So the potential energy function is,

U(x) = -1.5x² + 13.5

Now we can use the conservation of energy to find the velocity of the particle at x = 8.0 m. At x = 3.0 m, the kinetic energy of the particle is,

K(3) = (1/2)mv² = (1/2)(2.6 kg)(7.0 m/s)² = 67.9 J

The potential energy at x = 3.0 m is:

U(3) = -1.5(3)² + 13.5 = 0 J

So the total energy of the particle at x = 3.0 m is:

E(3) = K(3) + U(3) = 67.9 J

At x = 8.0 m, the potential energy is:

U(8) = -1.5(8)² + 13.5 = -94.5 J

Therefore, the kinetic energy of the particle at x = 8.0 m is:

K(8) = E(3) - ΔU = 67.9 J - (-94.5 J) = 162.4 J

The velocity of the particle at x = 8.0 m can be found using the kinetic energy formula:

K = (1/2)mv²

v = √(2K/m) = √(2(162.4 J)/(2.6 kg)) = 9.30 m/s

To know more about speed, here

brainly.com/question/28224010

#SPJ4

The distance traveled by Dheepthi from point A to B is 29.5m.

To find the distance AB, we need to use Pythagoras' theorem, which states that the square of the hypotenuse (the longest side) of a right triangle is equal to the sum of the squares of the other two sides.

In this case, we can break down Dheepthi's journey into a series of right triangles.

First, she walks 4m in the south direction from point A. Then, she turns right and walks 5m, forming a right triangle with legs of 4m and 5m.

Using Pythagoras' theorem, we can calculate the hypotenuse (her distance from point A) to be 6.4m.

Next, she turns left and walks 3m, forming another right triangle with legs of 1.6m (the remainder of her distance south) and 3m. Using Pythagoras' theorem again, we can calculate the hypotenuse of this triangle to be 3.4m.

Then, she turns right and walks 4m, forming a right triangle with legs of 1.6m and 4m. The hypotenuse of this triangle is 4.2m.

Finally, she turns right again and walks 15m, forming a right triangle with legs of 4.2m and 15m. The hypotenuse of this triangle is 15.5m.

Adding up all of these distances, we get a total distance of 6.4m + 3.4m + 4.2m + 15.5m = 29.5m. Therefore, the distance AB is 29.5m.

For more such answers on Motion in one-dimension

https://brainly.com/question/28282585

#SPJ11

In most applications, the braking torque of the friction brakes should be adequate enough to bring the vehicle to a complete stop within a reasonable distance.

This is important for safety reasons and to prevent accidents.

The braking torque required depends on several factors, including the weight of the vehicle, the speed at which it is traveling, and the road conditions.

To calculate the required braking torque, one can use the equation:

Braking torque = vehicle weight x deceleration x radius of the brake rotor

Deceleration is the rate at which the vehicle slows down, and the radius of the brake rotor is the distance from the center of the rotor to the point where the brake pads make contact.

Once the required braking torque is calculated, the brake system can be designed accordingly.

This may involve selecting the appropriate brake pad material, ensuring proper brake cooling, and selecting the right brake rotor size and design.

It is important to note that the braking torque should not be excessive, as this can cause premature wear of the brake components and reduce their effectiveness over time.

Additionally, excessive braking torque can lead to wheel lock-up and skidding, which can be dangerous.

To know more about braking torque :

https://brainly.com/question/10727721

#SPJ11

The pressure in kPa is approximately 102.4 kPa, when a barometer indicates that the atmospheric pressure is actually 768.2 mm hg. The correct option is b.

To convert the atmospheric pressure from mmHg to kPa, we can use the following conversion formula:

1 mmHg = 0.133322 kPa.

Given that the barometer indicates the atmospheric pressure is 768.2 mmHg, we can find the pressure in kPa by multiplying the pressure in mmHg by the conversion factor.

Pressure in kPa = 768.2 mmHg * 0.133322 kPa/mmHg

Pressure in kPa ≈ 102.4 kPa

Therefore, the correct answer is (b) 102.4 kPa.

For more such questions on Pressure.

https://brainly.com/question/30541345#

#SPJ11

A student is constructing a stream table to investigate how erosion by a meandering stream is affected by the slope of the land should  vary,  the number of blocks stacked beneath the tray. Option A

The purpose of the experiment is to investigate how the slope of the land affects erosion by a meandering stream. By varying the number of blocks stacked beneath the tray, the student can change the slope of the land and observe how this affects the behavior of the stream and the resulting erosion.

Varying the sediment size, the volume of water, or the size of the hole in the bottom of the container would not directly address the question of how slope affects erosion by a meandering stream.

Learn more about erosion from

https://brainly.com/question/26960499

#SPJ1

The final velocity of the bicycle and student is 5.67 m/s to the east.

We can solve this problem by applying Newton's second law, which states that the net force acting on an object is equal to its mass times its acceleration:

[tex]fnet = mtotal*a[/tex]

where fnet is the net force, mtotal is the total mass of the system, and a is the acceleration.

In this case, the net force acting on the bicycle and student is 125 N to the east, the total mass is the sum of the masses of the student and the bicycle, which is 55 kg + 11 kg = 66 kg, and the time interval is 3.0 s.

Therefore, the acceleration of the system is:

[tex]a = fnet / mtotal = 125 N/66kg = 1.89m/s^{2}[/tex]

Using the kinematic equation that relates the final velocity (v), initial velocity (u), acceleration (a), and time (t):

[tex]v= u+at[/tex]

Since the bicycle and student are initially at rest, the initial velocity is zero. Therefore, the final velocity is:

[tex]v= at = (1.89 \frac{m}{s}^{2})*(3.0s) = 5.67\frac{m}{s}[/tex]

To know more about acceleration:

https://brainly.com/question/12550364

#SPJ4

The final angular speed of the hard disk is 766.9 rad/s, and it takes 4.04 s to reach this speed with an angular acceleration of 190.0 [tex]rad/s^2[/tex].

To take care of this issue, we want to utilize the equation that relates the rakish removal of a pivoting object to its precise speed increase, time, and beginning rakish speed. The equation is given by:

θ = 1/2 * α * [tex]t^2[/tex] + ω0 * t + θ0

Where θ is the complete point pivoted by the plate, α is the precise speed increase, t is the time slipped by, ω0 is the underlying rakish speed, and θ0 is the underlying point.In this issue, the circle begins from rest, so ω0 = 0. The rakish speed increase of the plate is given as 190 [tex]rad/s^2[/tex], and the last precise speed is 7200 rpm.

We want to change the last precise speed from rpm over completely to rad/s by increasing it with 2π/60. In this manner, the last precise speed is 240π rad/s.We can now substitute these qualities into the recipe and compute the absolute point pivoted by the circle after 10.0 seconds:

θ = 1/2 * 190 [tex]rad/s^2[/tex] * [tex](10.0 s)^2[/tex] + 0 rad/s * 10.0 s + 0 rad

θ = 9500 rad

To change this point over completely to the quantity of insurgencies, we partition it by 2π, as one unrest compares to a point of 2π radians. Consequently:

θ in transformations = 9500 rad/(2π rad/unrest) = 1507 upheavals

Accordingly, the plate has made 1507 insurgencies after 10.0 seconds from its underlying state.

To learn more about angular speed, refer:

https://brainly.com/question/30632745

#SPJ4

The complete question is:

A computer hard disk starts from rest, then speeds up with an angular acceleration of 190.0 [tex]rad/s^{2}[/tex]until it reaches a final angular speed of 7300.0 rpm.

(a) What is the final angular speed in units of rad/s? rad/s.

(b) How long does it take for the disk to reach this angular speed? s

(c) How many revolutions (not radians) does it make in getting to the final angular speed? rev

(d) Once the disk reaches its final angular speed, it continues rotating at this same speed. How many revolutions has the disk made 10.0 s after it started up from rest?

The clock must be moving at a velocity of approximately 4.53 m/s relative to the observers on the ground in order to experience a time dilation of 2.7 ns over the course of one day.

According to Einstein's theory of relativity, time dilation occurs when an object moves at a constant velocity relative to an observer. This means that time appears to pass more slowly for an object in motion than for an observer at rest. The amount of time dilation depends on the relative velocity between the two objects.

In this problem, we are given that a clock moving at some velocity loses 2.7 nanoseconds (ns) over the course of one day, as measured by observers on the ground. We want to determine the velocity of the clock.

We can use the formula for time dilation, which states that the observed time interval (Δt') is related to the proper time interval (Δt) by:

[tex]$\Delta t' = \frac{\Delta t}{\sqrt{1 - \frac{v^2}{c^2}}}$[/tex]

where v is the velocity of the clock, c is the speed of light, and the square root is taken using the binomial approximation (since v << c).

We know that Δt' = Δt - 2.7 ns and Δt = 1 day = 86400 seconds. Substituting these values and simplifying, we get:

[tex]$86400 - 2.7 = \frac{86400}{\sqrt{1 - \frac{v^2}{c^2}}}$[/tex]

Squaring both sides and rearranging, we can solve for v:

[tex]$v = c \sqrt{1 - \left(\frac{2.7}{86400}\right)^2} \approx 4.53 \text{ m/s}$[/tex]

To learn more about Einstein's theory

https://brainly.com/question/1098431

#SPJ4

According to the article, the Juno spacecraft has several observational capabilities. Juno's observational capabilities allow scientists to study Jupiter's atmosphere, magnetic field, and gravity field.

The Juno spacecraft has several observational capabilities that have been identified in various articles. Some of the observational capabilities of the Juno spacecraft are:

Learn more about the Juno spacecraft: https://brainly.com/question/13753163

#SPJ11

Type 1 cable consists of a braided outer shield surrounding the entire cable core and covered with a jacket, the correct answer is c.

Type 1 cable is commonly used in high-frequency applications where signal interference is a concern. The braided shield provides excellent protection against electromagnetic interference (EMI) and radio frequency interference (RFI). It also helps to reduce signal loss and attenuation by keeping the signal within the cable and preventing it from escaping.

The jacket provides an additional layer of protection against environmental factors such as moisture, abrasion, and temperature extremes. Type 1 cable is a reliable and effective option for applications where signal integrity and protection against interference are critical factors, the correct answer is c.

To learn more about cable follow the link:

https://brainly.com/question/30424450

#SPJ4

The complete question is:

Type 1 cable consists of ?

a. twisted pairs

b. each individually shielded with foil

c. with a braided outer shield surrounding the entire cable core and covered with a jacket.

When the hair dryer is turned on, it draws in cool air from its back end and passes it over a heating element, which increases the temperature of the air.

Cool air is taken in and is heated using a heating element as described. The heated air is then forced out through the front end of the dryer by a fan. As the warm air blows over the hair, it causes the water molecules in the hair to evaporate, thus drying the hair. The hair dryer also helps to style hair by blowing it in different directions, causing it to move and create volume.

Learn more about hair dryers here:

https://brainly.com/question/29086609

#SPJ1

Equipment that is designed to be dust-ignitionproof must be constructed in a way that prevents dust from getting inside and removes the possibility that heat, sparks, or arcs generated inside the apparatus would result in explosions or fires.

This is due to the fact that dust can be extremely hazardous in some working situations and can result in mishaps that could harm personnel or harm equipment.

In order to work safely in dusty environments, it is crucial to design and construct dust-ignitionproof equipment that can do so by avoiding the ignition of any dust that may be present inside or around the equipment. The ability to operate the machinery safely without endangering their health or safety is thus guaranteed.

Learn more about explosions:

https://brainly.com/question/30682364

#SPJ4

The maximum speed is 62.8 cm/s.

We can start by finding the frequency of the oscillation:

Then, we can use the formula for the displacement of an object in simple harmonic motion:

Where x is the displacement (in meters), A is the amplitude (in meters), f is the frequency (in Hz), and t is the time (in seconds).

We are given that the displacement is 10.0 cm = 0.1 m, and we know that the amplitude is half of the total displacement (since the ruler moves symmetrically around its equilibrium position), so:

Using this information, we can find the maximum speed by taking the derivative of the displacement equation:

At the point of maximum displacement (when sin(2πft) = 1), the speed is:

vmax = 2πfA = 2π(2.5 Hz)(0.05 m) = 0.628 m/s = 62.8 cm/s (to one decimal point).

To learn more about harmonic motion, here

https://brainly.com/question/30404816

#SPJ4

If a red giant appears the same brightness as a red main sequence star, it is most likely that the red giant is further away.

Here's a step-by-step explanation:

1) Red giants and red main sequence stars are both types of stars that are similar in color, but they have different sizes and luminosities.

2) Red giants are much larger and more luminous than red main sequence stars. They are formed when a star like the sun runs out of fuel and begins to expand and cool.

3)Red main sequence stars, on the other hand, are smaller and less luminous than red giants. They are stars that are still burning hydrogen fuel in their cores.

4) The apparent brightness of a star depends on both its intrinsic luminosity and its distance from Earth. The farther away a star is, the dimmer it appears to us on Earth.

5) If a red giant appears the same brightness as a red main sequence star, this means that the red giant must be much farther away from Earth than the red main sequence star.

6) This is because the red giant is intrinsically much more luminous than the red main sequence star. If both stars were at the same distance from Earth, the red giant would appear much brighter than the red main sequence star.

7) However, since the red giant appears the same brightness as the red main sequence star, this means that the red giant must be much farther away from Earth and therefore appears dimmer.

Overall, by comparing the apparent brightness of a red giant and a red main sequence star, we can determine which star is farther away.

If the red giant appears the same brightness as the red main sequence star, then the red giant is likely to be much farther away.

To know more about fusion reactions :

https://brainly.com/question/4837991

#SPJ11

A photon with a longer wavelength has a lower frequency than a photon with a short wavelength, the correct option is (d)

The wavelength and frequency of a photon are related to its energy and color. Photons with shorter wavelengths have higher frequencies and higher energy, while photons with longer wavelengths have lower frequencies and lower energy.

This is described by the equation E = hf, where E is energy, h is Planck's constant, and f is frequency. Therefore, a photon with a longer wavelength has a lower frequency than a photon with a shorter wavelength, the correct option is (d)

To learn more about wavelength follow the link:

https://brainly.com/question/4112024

#SPJ4

The complete question is:

A photon with a longer wavelength

a) is more energetic than a photon with a short wavelength.

b) travels slower than a photon with a short wavelength.

c) is more blue than a photon with a short wavelength.

d) has a lower frequency than a photon with a short wavelength.

e) All of the above

Momentum is defined as mass multiplied by velocity, so the total momentum before the extinguisher is thrown is 70 kg*m/s.

Velocity is a vector quantity that measures the rate of change of an object's position. It is determined by the displacement of an object over a given period of time, and is usually expressed in terms of distance over time.

The astronaut's resulting velocity will be the same as the fire extinguisher's velocity, 3.5 m/s.
This is because the astronaut and extinguisher have the same mass and momentum must be conserved.
Momentum is defined as mass multiplied by velocity, so the total momentum before the extinguisher is thrown is 75 kg * 0 m/s + 20 kg * 3.5 m/s
= 70 kg*m/s.

To learn more about Velocity

https://brainly.com/question/626479

#SPJ1

The distance to the RR Lyrae variable star will be underestimated by a factor of 10 due to the effect of interstellar dust.

The distance to an astronomical object can be determined using the inverse square law, which states that the apparent brightness of an object decreases as the square of the distance increases.

The apparent magnitude of an object is a measure of its brightness as seen from Earth. The lower the magnitude, the brighter the object.

If interstellar dust makes an RR Lyrae variable star look 5 magnitudes fainter than it should, then the apparent magnitude of the star as observed from Earth is 5 magnitudes greater than its true apparent magnitude.

Using the inverse square law, we can write:

Apparent brightness ~ 1 / (distance[tex])^2[/tex]

If the apparent brightness is 5 magnitudes fainter than it should be, we can express the distance to the star as:

distance = sqrt(100^(0.4 * 5)) x true distance

where 0.4 is the conversion factor from magnitudes to brightness ratios, and 100 is the ratio of the brightness of the star as observed from Earth to its true brightness.

Simplifying this expression, we get:

distance = 100^(0.5) x true distance

distance = 10 x true distance

Therefore, the distance to the RR Lyrae variable star will be underestimated by a factor of 10 due to the effect of interstellar dust.

Learn more about  interstellar dust.

https://brainly.com/question/13034266

#SPJ4

The change in sound of the train whistle from a higher pitch to a lower pitch after the train passes can be explained by the Doppler Effect.

Here is a step-by-step explanation:

1) The Doppler Effect is the change in frequency or pitch of a sound wave due to the relative motion of the sound source and the observer.

2) When the train is approaching the observer, the sound waves from the train are compressed and the frequency or pitch of the sound wave appears higher.

3) As the train passes the observer, the sound waves from the train are stretched and the frequency or pitch of the sound wave appears lower.

4) This change in frequency or pitch can be explained by the relative motion of the train and the observer.

When the train is approaching the observer, the sound waves from the train are "bunched up" and appear closer together, resulting in a higher frequency or pitch.

When the train is moving away from the observer, the sound waves are "stretched out" and appear further apart, resulting in a lower frequency or pitch.

5) The change in frequency or pitch of the train whistle can be represented by a graph showing the frequency of the sound wave over time.

Before the train passes, the frequency of the sound wave gradually increases as the train approaches the observer.

After the train passes, the frequency of the sound wave gradually decreases as the train moves away from the observer.

6) The change in frequency or pitch of the train whistle can also be calculated using the Doppler Effect equation, which relates the frequency of the sound wave, the speed of the sound wave, and the relative velocity of the train and the observer.

In summary, the change in sound of the train whistle from a higher pitch to a lower pitch after the train passes is due to the Doppler Effect, which is caused by the relative motion of the train and the observer.

The change in frequency or pitch can be represented by a graph or calculated using the Doppler Effect equation.

To know more about Doppler Effect :

https://brainly.com/question/15318474

#SPJ11

Answer:

The solute and solvent have distinct chemical characteristics.

Explanation:

The solute and solvent could not have been mixed at the current temperature. The solute and solvent have distinct chemical characteristics. There was more pressure. The mixture was fully saturated.

Hope this helped :)

Answer: The fact that the solute does not mix with the solvent even after boiling and stirring repeatedly could be due to various reasons:

Insolubility: The solute may be insoluble in the solvent, meaning it cannot dissolve in it.  This could be because the solute particles are too large or have a different molecular structure compared to the solvent. For example, oil and water do not mix because oil is non-polar while water is polar.

Immiscibility: The solute and solvent may be immiscible, which means they cannot form a homogeneous mixture.  Immiscibility occurs when there is a significant difference in polarity or density between the solute and solvent.  An example of immiscible substances is oil and water, where they form separate layers instead of mixing.

Saturation: The solvent may already be saturated with the solute. Saturation occurs when the solvent can no longer dissolve any more of the solute at a given temperature. Further boiling and stirring would not result in any additional mixing.

Chemical reaction: There might be a chemical reaction occurring between the solute and solvent, leading to the formation of a new substance or a precipitate.  This can prevent the solute from dissolving completely in the solvent.

To determine the specific reason why the solute is not mixing with the solvent, it would be helpful to know the nature of the solute and solvent, as well as any other conditions or factors involved in the process.

Learn more about solutions here: https://brainly.com/question/11985826.

Frequency = the rate per second of a vibration constituting a wave, either in a material (as in sound waves), or in an electromagnetic field (as in radio waves and light).

The frequency is =  0.00030864 Hz

Solution -  To find the frequency of the oscillation after an intense earthquake, we need to use the formula:
Frequency (f) = 1 / Period (T)
Given that the period of the Earth's oscillation is 54 minutes, we first need to convert this to seconds:
54 minutes * 60 seconds/minute = 3240 seconds
Now, we can find the frequency:
Frequency (f) = 1 / 3240 seconds ≈ 0.00030864 Hz
the frequency of the oscillation after the intense earthquake is approximately 0.00030864 Hz.

to learn  more about oscillations, click on this -

brainly.com/question/30111348

#SPJ11

The force exerted on the charge 10q has a magnitude that is greater than F.

The force between two charged particles is given by Coulomb's law:

F = k * q1 * q2 / r^2

If we consider the system of two charges, q and 10q, and assume that they are at the same distance from the test charge:

[tex]F = k * q * qtest / r^2[/tex]

where qtest is the charge of the test charge.

Similarly, the force on the test charge due to 10q is given by:

F' = k * (10q) * qtest / r^2

Dividing second equation by the first, we get:

F' / F =[tex](10q * qtest) / (q * qtest)[/tex] = 10

So the force exerted on the charge 10q has a magnitude that is greater than the force exerted on the charge q by a factor of 10.

To know more about Coulomb's law, here

brainly.com/question/506926

#SPJ4

According to Newton's second law of motion, the force required to accelerate an object is directly proportional to its mass. This means that the larger the mass of an object, the greater the force required to move it.

In this scenario, the large truck has a much greater mass than the small car. Therefore, the large truck would be more difficult to push to the gas station. It would require a much greater force to overcome its inertia and start its motion. Once the truck is in motion, it would also require a greater force to keep it moving at a constant speed.

On the other hand, the small car has a smaller mass and would require less force to push it to the gas station. Once in motion, it would require less force to maintain its speed.

Therefore, due to the larger mass of the truck, it would be more difficult to push to the gas station compared to the smaller car.

Learn about Newton's second law here https://brainly.com/question/25545050

#SPJ1

If the distance between the thermopile sensor and the source is doubled and all other parameters remain the same, the thermopile reading will decrease by 75%.

The thermopile reading is a measure of the temperature difference between the thermopile sensor and the source. If the distance between the thermopile sensor and the source is doubled, the temperature difference between the two will decrease. This is because the heat will have to travel a longer distance to reach the thermopile sensor, resulting in a lower temperature difference. It is important to note that this calculation assumes that all other parameters remain constant.

The percentage decrease in the thermopile reading can be calculated using the inverse square law. According to this law, the intensity of the heat radiation is inversely proportional to the square of the distance between the source and the thermopile sensor. This means that if the distance is doubled, the intensity of the heat radiation will decrease by a factor of four (2 squared). Therefore, the thermopile reading will decrease by 75% (4/1) when the distance between the thermopile sensor and the source is doubled.

know more about inverse square law here:

https://brainly.com/question/30404562

#SPJ11

The work done by the torque to stop the wheel is -1918 J.

The given parameters are:
- Wheel radius (r): 15 cm = 0.15 m
- Rotational inertia (I): 2.3 kg·[tex]m^{2}[/tex]
- Angular velocity (ω): 6.5 revolutions per second = 6.5 * 2π rad/s ≈ 40.84 rad/s

To find the work done by the torque to stop the wheel, we can use the rotational work-energy theorem: W = 0.5 * I * (ω_[tex]f^{2}[/tex] - ω_[tex]i^{2}[/tex]), where W is the work done, ω_f is the final angular velocity (0 rad/s), and ω_i is the initial angular velocity.

Plugging in the given values:
W = 0.5 * 2.3 kg·[tex]m^{2}[/tex] * (0^2 - 40.84 rad/s^2)
W = 0.5 * 2.3 kg·[tex]m^{2}[/tex] * (-1667.86 rad^2/s^2)
W ≈ -1918.24 J

Since work is done against the frictional force to bring the wheel to a stop, the work done is negative. Therefore, the work done by the torque to stop the wheel is most nearly -1918 J.

Know more about torque here:

https://brainly.com/question/17512177

#SPJ11

part a.

An element is described as a pure substance that is composed of only one type of atom. Each element is characterized by a unique atomic number, which corresponds to the number of protons in the nucleus of its atoms.

part b.

a) Mercury -  breaking down mercury would yield only mercury atoms.

b) Sodium chloride -  Breaking down sodium chloride would yield sodium and chlorine atoms in their respective ratios.

c) Water -Breaking down water would yield hydrogen and oxygen atoms in their respective ratios.

d) Carbon dioxide : Breaking down carbon dioxide would yield carbon and oxygen atoms in their respective ratios.

e) Oxygen - breaking oxygen down would yield only oxygen atoms.

Some facts about elements includes;

Learn more about elements at: https://brainly.com/question/20096027

#SPJ1

The speedometer of your car reading v = 45 m/s indicates the instantaneous speed of your car at that particular moment in time.

Instantaneous speed is the speed of an object at a specific moment in time and is often represented as the magnitude of the instantaneous velocity vector. In the context of your car's speedometer, the reading of 45 m/s indicates the speed of your car at the exact moment the reading was taken.

In contrast, the average speed is the total distance travelled by an object divided by the time it took to travel that distance. It represents the average rate at which the object covered the distance, and does not provide information about the object's speed at any particular moment in time.

Therefore, the reading on your car's speedometer represents instantaneous speed, not average speed.

To learn more about speedometer, refer:-

https://brainly.com/question/29098798

#SPJ11

The speedometer of your car reading v = 45 m/s is the instantaneous speed of the car.

Instantaneous speed is the speed of an object at a particular moment in time, without taking into account any previous or future motion. In this case, the speedometer is providing a real-time reading of the car's speed at that moment.

The speedometer measures the speed of the car through a device called a speed sensor.

The sensor measures the rotation of the wheels and converts it into an electrical signal, which is then used to calculate the speed of the car.

The speedometer then displays this speed in m/s or mph on the dashboard of the car.

It's important to note that instantaneous speed can change rapidly as the car accelerates, decelerates, or changes direction. This means that the speedometer reading will change as the car's speed changes.

In contrast, average speed is calculated by dividing the total distance traveled by the total time taken to travel that distance.

It provides an average value of the speed over a period of time, such as the entire trip or journey.

To know more about speedometer refer link :

https://brainly.com/question/29098798

#SPJ11

The longest sound wavelength we can hear is 16.6 m while  the shortest sound wavelength we can hear is 0.0166 m.

We can use the formula for the speed of sound to find the longest and shortest sound wavelengths humans can hear:

speed of sound = frequency × wavelength

Let's first solve for the longest wavelength (a):

a. Longest wavelength = speed of sound / lowest frequency
Longest wavelength = 332 m/s / 20 Hz
Longest wavelength = 16.6 m

Now, let's solve for the shortest wavelength (b):

b. Shortest wavelength = speed of sound / highest frequency
Shortest wavelength = 332 m/s / 20,000 Hz
Shortest wavelength = 0.0166 m (or 1.66 cm)

So, the longest sound wavelength humans can hear is 16.6 meters and the shortest sound wavelength we can hear is 0.0166 meters (1.66 centimeters).

More on wavelength: https://brainly.com/question/9668457

#SPJ11

Newton’s second law of motion states that the force F acting on an object of mass m produces an acceleration a in the object, and is given by, F = ma. The law s invariant under Galilean transformation.

The Galilean transformation is a set of equations that describe the relationship between two reference frames that are in relative motion with constant velocity. It has no effect on the form of Newton’s second law because it only involves a change of coordinates and time, which do not affect the physical laws.

To see this, consider two reference frames S and S', where S' moves with constant velocity v with respect to S. Let an object of mass m be at rest in S, and let F be the net force acting on it in S. According to Newton’s second law in S, we have:

F = ma

Now, let us apply the Galilean transformation to the equation. The position of the object in S' is given by:

x' = x - vt

where x is the position of the object in S, and t is time. Taking the derivative of x' with respect to t, we get:

v' = dx'/dt

= dx/dt - v

= v - v

= 0

This means that the velocity of the object is the same in both reference frames. Similarly, the acceleration is also the same in both reference frames, since it is the derivative of velocity,

a' = dv'/dt = da/dt = a

Therefore, we can write Newton’s second law in S' as,

F' = ma'

where F' is the net force acting on the object in S'. Substituting a' = a, we get:

F' = ma

which is the same form as in S. Thus, we see that the form of Newton’s second law is invariant under the Galilean transformation.

To know more about Galilean transformation, here

brainly.com/question/29655824

#SPJ4

The solid hemisphere exerts a pressure of 17,350 Pascals on the surface.

To find the pressure exerted by the solid hemisphere, we need to consider the weight of the object and the surface area in contact with the surface. The weight of the solid hemisphere is equal to its mass times the acceleration due to gravity, which is 10 kg x 9.81 m/s^2 = 98.1 N.

The surface area in contact with the surface is the curved surface area of the hemisphere, which is half the surface area of a sphere with radius 30 mm. Using the formula for the surface area of a sphere, we get:

Surface area = 2πr^2 = 2π(30 mm)^2 = 5,655.6 mm^2

To convert this to square meters, we divide by 1,000,000, which gives us 0.0056556 m^2.

Finally, we can calculate the pressure exerted by the solid hemisphere using the formula:

Pressure = Weight / Surface area = 98.1 N / 0.0056556 m^2 = 17,350 Pa

To learn more about : hemisphere

https://brainly.com/question/29282727

#SPJ11