What do these two changes have in common?
crushing a mineral into powder
picking up a paper clip with a magnet
Select all that apply.
Both are changes of state.
Both conserve mass.
Submit
Both are only physical changes.
Both are chemical changes.
Answers
The appearance and observable qualities of matter are considered to be its physical attributes. Colour, smell, taste, solubility, etc. An attribute that appears during a chemical reaction is known as a chemical property. A few examples include pH, reactivity, and flammability, etc. The correct option is B.
The chemical makeup or content of matter are not altered after a physical transformation. The internal makeup is unaffected as molecules rearrange themselves during this transformation. The chemical attribute is unaffected by a physical change.
Here both crushing a mineral into powder and picking up a paper clip with a magnet are physical changes.
Thus the correct option is B.
To know more about physical changes, visit;
https://brainly.com/question/28742279
#SPJ1
Related Questions
In a galvanic cell, a spontaneous redox reaction occurs. However,the reactants are separated such that the transfer of electrons isforced to occur across a wire. The resulting electricity ismeasured in volts (\rm V) and is the sum of the potentials of the oxidation andreduction half-reactions:
{E^\circ}_{\rm cell} = {E^\circ}_{\rm ox} + {E^\circ}_{\rm red}
A table of standard reduction potentials gives{E^\circ}_{\rm red}values for common half-reactions.
Reduction half-reaction E(\rm V)
\rm Ag^+{(aq)}+e^- \rightarrow Ag{(s)} 0.80
\rm Cu^{2+}{(aq)}+2e^- \rightarrow Cu{(s)} 0.34
\rm Ni^{2+}{(aq)}+2e^- \rightarrow Ni{(s)} -0.26
\rm Fe^{2+}{(aq)}+2e^- \rightarrow Fe{(s)} -0.45
\rm Zn^{2+}{(aq)}+2e^- \rightarrow Zn{(s)} -0.76
By reversing any of these reduction half-reactions, you getthe corresponding oxidation half-reaction, for which{E^\circ}_{\rm ox}has the opposite sign of{E^\circ}_{\rm red}.
Part A
Calculate the standard potential for thefollowing galvanic cell:
\rm Ni (s)~ | ~ Ni^{2+}{(aq)}~ | ~Ag^{+}{(aq)}~ |~ Ag {(s)}
Express your answer numerically involts.
{E^\circ}_{\rm cell}= \rm V
Answers
The standard potential for the given galvanic cell is 1.06 V.
To calculate the standard potential for the galvanic cell Ni(s) | Ni2+(aq) | Ag+(aq) | Ag(s), you need to follow these steps:
1. Identify the oxidation and reduction half-reactions:
Ni(s) → Ni2+(aq) + 2e- (oxidation half-reaction)
Ag+(aq) + e- → Ag(s) (reduction half-reaction)
2. Find the standard reduction potentials (E°red) for each half-reaction from the table:
E°red(Ni2+ + 2e- → Ni(s)) = -0.26 V
E°red(Ag+ + e- → Ag(s)) = 0.80 V
3. Reverse the oxidation half-reaction and find its standard potential (E°ox) by changing the sign of E°red:
E°ox(Ni(s) → Ni2+(aq) + 2e-) = 0.26 V
4. Calculate the standard potential for the galvanic cell (E°cell) using the formula E°cell = E°ox + E°red:
E°cell = 0.26 V + 0.80 V
5. Obtain the final answer:
E°cell = 1.06 V
So, the standard potential for the given galvanic cell is 1.06 V.
To know more about the standard potential refer here :
https://brainly.com/question/29653954#
#SPJ11
the pKa of benzotriazole is ?
Answers
The pKa of benzotriazole is approximately 1.8. This means that in a solution with a pH of 1.8 or lower, most of the benzotriazole molecules will be protonated (have a positive charge).
As the pH of the solution increases, the number of protonated benzotriazole molecules decreases, and more of the molecules become neutral. This change in protonation state can affect the chemical properties and reactivity of benzotriazole.
For example, at low pH, benzotriazole may act as a weak acid and donate a proton to a base. At higher pH, benzotriazole may be more likely to form a complex with a metal ion. Understanding the pKa of a molecule like benzotriazole is important for predicting how it will behave under different conditions and in different chemical reactions.
Learn more about protonation state here:
brainly.com/question/28590098
#SPJ11
A student is comparing two solutions that contain the same number of moles of a solute. One solution is 2.4 M and the other is 0.8 M. The student says the first solution has the larger volume because the larger molarity solution has a larger volume of solvent.
Answer in your response: What, if anything, is wrong with the student’s solution? If something is wrong, explain what it is and how to correct it. If nothing is wrong, explain how the solution was obtained
Answers
Answer:
The student's reasoning is incorrect. The molarity of a solution is defined as the number of moles of solute per liter of solution, not the total volume of the solution. Therefore, it is possible for a solution with a lower molarity to have a larger volume than a solution with a higher molarity, if the amount of solute is the same. In this case, the two solutions have the same number of moles of solute, so their volumes cannot be determined solely based on their molarities. Additional information, such as the masses of the solute or solvent, would be needed to determine the volumes of the two solutions.
Explanation:
The student's reasoning is based on a misunderstanding of the definition of molarity. Molarity is defined as the number of moles of solute per liter of solution. It is not defined in terms of the total volume of the solution. Therefore, it is possible for a solution with a lower molarity to have a larger volume than a solution with a higher molarity, if the amount of solute is the same.
In this case, the student states that both solutions contain the same number of moles of solute. However, the student incorrectly assumes that the larger molarity solution has a larger volume of solvent. This assumption is incorrect because the molarity does not determine the volume of the solvent, but rather the concentration of the solute in the solution.
To determine the volumes of the two solutions, additional information would be needed, such as the masses of the solute or solvent. Without this information, it is not possible to determine which solution has a larger volume.
How does ionic bonding relates to electrostatic force of attraction?
Answers
Ionic bonding is a type of chemical bond that occurs due to the electrostatic force of attraction between oppositely charged ions. In this process, one atom donates an electron to another atom, creating a positive ion (cation) and a negative ion (anion). These ions are then held together by the electrostatic force of attraction, forming an ionic bond.
Ionic bonding is a type of chemical bonding that involves the transfer of electrons from one atom to another to form ions. This transfer of electrons results in the formation of positively charged cations and negatively charged anions.
The electrostatic force of attraction between these oppositely charged ions is what holds them together in an ionic bond. This force is a fundamental principle of electrostatics, which states that opposite charges attract each other while like charges repel each other. Therefore, the strength of the ionic bond depends on the magnitude of the electrostatic force of attraction between the ions, which in turn depends on the size and charge of the ions involved.
To know more about electrostatic force visit:-
https://brainly.com/question/9774180
#SPJ11
When bromination occurs in the presence of water what happens?
Answers
The HOBr can then react further with organic compounds present in the solution, leading to the formation of brominated organic compounds.
What happen when bromination occurs react in presence of water?When bromination occurs in the presence of water, the bromine molecule reacts with the water molecule to form hydrobromic acid (HBr) and hypobromous acid (HOBr). This reaction is called bromine water reaction.
The HOBr can then react further with organic compounds present in the solution, leading to the formation of brominated organic compounds.
Learn more about Bromination occurs
brainly.com/question/29795879
#SPJ11
Two aqueous solutions are both at room temperature and are then mixed in a coffee cup calorimeter. The reaction causes the temperature of the resulting solution to rise above room temperature. Which of the following statements is true?
a. This type of experiment will provide data to calculate Δ
H
r
x
n
.
b. The reaction is exothermic.
c. Energy is leaving the system during reaction.
d. The products have a lower potential energy than the reactants.
e. All of the above statements are true.
Answers
The correct answer is e. All of the above statements are true.
When two aqueous solutions are mixed in a coffee cup calorimeter, the resulting reaction causes the temperature of the solution to rise above room temperature.
This indicates that energy is being released from the system, making the reaction exothermic. The change in enthalpy, ΔH, can be calculated using the calorimeter by measuring the temperature change and the heat capacity of the calorimeter. Finally, since energy is leaving the system during the reaction, the products have a lower potential energy than the reactants. Therefore, all of the statements in the question are true.
To know how a calorimeter function : https://brainly.com/question/2963957
#SPJ11
Q:What is the main difference between an element and a compound? A mixture and a pure substance?
Answers
An element is a pure substance that cannot be broken down into simpler substances by chemical means. It is made up of only one type of atom.
On the other hand, a compound is a pure substance made up of two or more different elements that are chemically bonded together in fixed ratios. This means that a compound has different properties than its individual elements.
A mixture is a combination of two or more substances that are not chemically bonded together. Mixtures can be separated by physical means such as filtration, distillation, or chromatography. A pure substance, on the other hand, is a substance that is made up of only one type of element or compound. Pure substances have fixed properties and cannot be separated by physical means.
In summary, the main difference between an element and a compound is that an element is made up of only one type of atom, while a compound is made up of two or more different elements. The main difference between a mixture and a pure substance is that a mixture is a combination of different substances that can be separated by physical means, while a pure substance is a substance that cannot be separated by physical means and is made up of only one type of element or compound.
Lear more about chromatography here:
brainly.com/question/11960023
#SPJ11
a molecule with the formula has a trigonal planar geometry. many electron groups are on the central atom?
Answers
In a molecule with a trigonal planar geometry, there are three electron groups on the central atom.
If a molecule with the formula has a trigonal planar geometry, it means that the central atom is surrounded by three electron groups, which are arranged in a flat, triangular shape. These electron groups could be lone pairs or bonded atoms, and they are all in the same plane. Therefore, we can conclude that there are three electron groups on the central atom in this molecule.
Learn more about trigonal planar geometry: https://brainly.com/question/29476210
#SPJ11
Describe an example of convection that you have experience recently at home,at school,or outside
Answers
An example of convection that you have experience recently at home,at school,or outside is the radiator.
What is convection?Convection is defined as a process of transfer of heat from a body with higher temperature through the movement of hot air away from the body into the environment.
A typical example of convection that is commonly used is the radiator.
The radiator is used to put warm air out at the top and draw in cooler air at the bottom of a building.
Learn more about heat here:
https://brainly.com/question/25603269
#SPJ1
Determine the mechanism of nucleophilic substitution of the reaction and draw the products, including stereochemistry. The reaction proceeds by which mechanism? What are the products of the reaction?
Answers
The nucleophilic substitution reaction, a nucleophile a species with a lone pair of electrons, such as anions or neutral molecules replaces a leaving group on a substrate. The stereochemistry of the products will depend on the specific mechanism of the reaction.
There are two main mechanisms for nucleophilic substitution the SN1 and SN2 mechanisms. In the SN1 mechanism, the leaving group first dissociates from the substrate to form a carbocation intermediate. Then, a nucleophile attacks the carbocation from either side to form a mixture of stereoisomers racemic mixture. In the SN2 mechanism, the nucleophile attacks the substrate while the leaving group is still attached, leading to a single stereoisomer product with an inversion of configuration at the stereocenter. To determine the mechanism and products of a specific reaction, we would need to know the substrate, nucleophile, and conditions of the reaction. Once we have that information, we can predict the mechanism and stereochemistry of the products based on our knowledge of nucleophilic substitution reactions.
learn more about nucleophilic here
https://brainly.com/question/31496880
#SPJ11
For resonance to occur the number of {{c1::unpaired electrons}} must remain the same
Answers
For resonance to occur, the number of unpaired electrons must remain the same. This means that the electrons involved in the resonance structure must be able to shift without changing the overall number of unpaired electrons.
In other words, the electrons must remain in the same orbitals and maintain their spin states. This allows for the resonance structures to contribute equally to the overall molecular structure and stability. In order for resonance to occur in a molecule, the number of unpaired electrons must remain the same across all resonance structures. This is because resonance involves the delocalization of electrons within a molecule, which results in a combination of multiple contributing structures that share the same unpaired electron count. The overall structure is an average of these contributing structures, providing stability to the molecule.
More on resonance: https://brainly.com/question/14530458
#SPJ11
Enantiomers will rotate plane polarized light {{c1::equal amounts in opposite directions}}
Answers
Enantiomers will rotate plane polarized light in equal amounts but in opposite directions.
Enantiomers are a pair of molecules that are mirror images of each other but cannot be superimposed onto each other. Due to their different three-dimensional structures, they have the ability to rotate the plane of polarized light. When a sample of enantiomers is exposed to plane polarized light, each enantiomer will rotate the light in an equal amount but in opposite directions. This phenomenon is known as optical rotation.
Therefore, it can be concluded that enantiomers will rotate plane polarized light in equal amounts but in opposite directions, which is a characteristic feature of these mirror-image molecules.
Enantiomers are pairs of molecules that are mirror images of each other but cannot be superimposed. They have the same chemical properties but can exhibit different optical properties. When plane-polarized light passes through a solution containing one enantiomer, it will rotate the light in a specific direction, either clockwise (+) or counterclockwise (-). When the same light passes through a solution containing the other enantiomer, it will rotate the light in the opposite direction, with the same magnitude.
enantiomers have the unique property of rotating plane-polarized light by equal amounts but in opposite directions, making them optically active compounds.
To know more about three-dimensional, visit
https://brainly.com/question/2400003
#SPJ11
what are the chemical properties of the carbon family
Answers
Carbon has the smallest size, the highest electronegativity, the ability to catenate, the least amount of d-orbitals, and the fourth attribute. This is the chemical property of carbon.
A substance's characteristic or behaviour that may be seen during a reaction or change in chemical composition is said to have a chemical property. Since the arranged state of atoms inside a sample has to be disturbed in order to examine the property.
Carbon has the smallest size, the highest electronegativity, the ability to catenate, the least amount of d-orbitals, and the fourth attribute. (1) Compared to the other family members, carbon has exceptionally high melting and boiling temperatures. (2) One for the hardest materials known is carbon in the form of diamond.
To know more about chemical properties, here:
https://brainly.com/question/1935242
#SPJ1
when 0.80 mol of the contaminant are added to 10.0-gram of activated carbon in a 1-liter solution, what is the resulting solution concentration of the contaminant?
Answers
The resulting solution concentration of the contaminant is 0.0008 M.
To find the resulting solution concentration of the contaminant, we need to use the formula:
Concentration (in mol/L) = amount of solute (in mol) / volume of solution (in L)
First, we need to convert the mass of activated carbon to volume using its density. Let's assume the density of activated carbon is 0.5 g/mL.
Volume of activated carbon = mass / density = 10.0 g / 0.5 g/mL = 20 mL
Next, we need to add the 0.80 mol of contaminant to the 1-liter solution.
Volume of solution = 1 L = 1000 mL
Now we can calculate the resulting concentration of the contaminant:
Concentration = 0.80 mol / (20 mL + 1000 mL) = 0.0008 mol/mL = 0.0008 M
Therefore, the resulting solution concentration of the contaminant is 0.0008 M.
learn more about solution here
https://brainly.com/question/30665317
#SPJ11
A person packs two identical coolers for a picnic, placing twenty-four 12-ounce soft drinks and 5 pounds of ice in each. However, the drinks put into cooler A wer refrigerated for several hours before they were packed in the cooler, while the drinks put into cooler B were at room temperature. When the picnickers open the two coolers three hours later, most of the ice in cooler A is still present, while nearly all of the ice in cooler B has melted. Part A Explain the difference. Match the items in the left column to the appropriate blanks in the sentences on the right. Reset Help more The drinks that were at room temperature (cooler B) had thermal energy than the drinks that were refrigerated for several hours (cooler A). The temperature difference between the less drinks in cooler B and the ice was the difference between the drinks and the ice in greater than cooler A. smaller than Since in cooler B from the ice to the drinks thermal energy was transferred this led to an almost complete melting of the ice in it. from the drinks to the ice
Answers
The drinks that were at room temperature (cooler B) had thermal energy than the drinks that were refrigerated for several hours (cooler A).
The difference between the two coolers is due to the varying initial temperatures of the drinks placed inside them. The drinks in cooler A were refrigerated for several hours, while the drinks in cooler B were at room temperature. As a result, the drinks in cooler B had more thermal energy than those in cooler A.
The temperature difference between the drinks in cooler B and the ice was greater than the difference between the drinks and the ice in cooler A. This is because the room temperature drinks in cooler B were warmer than the refrigerated drinks in cooler A.
Due to the larger temperature difference in cooler B, thermal energy was transferred from the drinks to the ice more rapidly than in cooler A. This energy transfer caused the ice in cooler B to melt at a faster rate, resulting in almost all of the ice melting within three hours.
In contrast, the smaller temperature difference in cooler A led to a slower transfer of thermal energy from the drinks to the ice. This allowed the ice in cooler A to remain mostly intact after the same three-hour period.
Know more about thermal energy here:
https://brainly.com/question/18989562
#SPJ11
Chiral Nitrogen can ____ to its enantiomer at temps greater than or equal to_____ C.
Answers
Chiral Nitrogen can racemize to its enantiomer at temperatures greater than or equal to its melting point. A chiral nitrogen atom is an atom of nitrogen that has four different groups or atoms attached to it, resulting in two non-superimposable mirror image configurations, also known as enantiomers.
At temperatures above the melting point, the chiral nitrogen atom can undergo a process called racemization, where it interconverts between its two enantiomers, resulting in a mixture of equal amounts of each enantiomer. This process occurs due to the increased thermal energy, causing the molecule to overcome the energy barrier required for the interconversion to occur.
This phenomenon is important to consider in the synthesis and characterization of chiral compounds, as racemization can lead to the loss of enantiomeric purity, affecting the biological activity or other properties of the compound.
Lean more about enantiomers here:
brainly.com/question/30401546
#SPJ11
Based on electronegativity trends in the periodic table, predict which of the following compounds will have the greatest % ionic character in its bonds. a. H2O b. LiI c. CaO d. RbF e. HCl
Answers
Based on the electronegativity differences, compound d. RbF has the greatest electronegativity difference (3.2), indicating it has the greatest % ionic character in its bonds.
What factors affect the electronegativity of a compound?Based on electronegativity trends in the periodic table, to predict which of the following compounds will have the greatest % ionic character in its bonds, we can:
1. Determine the electronegativity values of each element involved in the bonds using a periodic table or a reference table.
2. Calculate the electronegativity difference between the elements forming each bond in the compounds.
Here are the approximate electronegativity values for each element:
H = 2.2, O = 3.5, Li = 1.0, I = 2.7, Ca = 1.0, Rb = 0.8, F = 4.0, Cl = 3.2
Now, let's calculate the electronegativity difference for each compound:
a. [tex]H_{2}O[/tex]: |2.2 - 3.5| = 1.3
b. LiI: |1.0 - 2.7| = 1.7
c. CaO: |1.0 - 3.5| = 2.5
d. RbF: |0.8 - 4.0| = 3.2
e. HCl: |2.2 - 3.2| = 1.0
To know more about Electronegativity:
https://brainly.com/question/29718411
#SPJ11
consider a gas at stp in a container of 22.4 l. what is the approximate value of n according to the ideal gas law? responses 0.5 0.5 1 1 8.31 8.31 224
Answers
The ideal gas law is PV = north, where P is pressure, V is volume, n is the number of moles of gas, R is the gas constant, and T is temperature. At STP (standard temperature and pressure), which is defined as 0°C and 1 atm, the pressure and temperature values are fixed, and therefore we can simplify the ideal gas law to V = north/P.
The gas is at STP and is contained in a volume of 22.4 L. Therefore, we can substitute the known values into the simplified ideal gas law equation. 22.4 L = north/1 atm Rearranging the equation to solve for n, we get n = 22.4 L * 1 atm / R * 273 K where R is the gas constant 8.31 J/mol*K and 273 K is the temperature at STP. Substituting these values, we get n = 22.4 L * 1 atm / 8.31 J/mol*K * 273 K Simplifying the equation, we get n ≈ 1 Therefore, the approximate value of n according to the ideal gas law is 1. It is important to note that the ideal gas law is an approximation and assumes that the gas particles are point masses with no volume, do not interact with each other, and experience no intermolecular forces. In reality, gases deviate from the ideal gas law at high pressures and low temperatures, and the accuracy of the ideal gas law decreases as the gas approaches its condensation point. In summary, at STP in a container of 22.4 L, the approximate value of n according to the ideal gas law is 1.
learn more about gas law here.
https://brainly.com/question/27009857
#SPJ11
What is the half-life of a 0.5g sample of radioisotope that decayed 0.125g in 9.6min?
A) 4.8 min
B) 9.6 min
C) 1.2 min
D) 2.4min
Answers
Answer:
A) 4.8 min
Explanation:
Of the following, which forms a weakly basic solution? Assume all acids and bases are combined in stoichiometrically equivalent amounts. Select the correct answer below: a. HCN(aq) +KOH(aq) KCN(aq) +H2O(0) b. HCl(aq) + H20(1)=CI (aq) + H2O+ (aq) c. HBr(aq) + KOH(aq) =KBr(aq) + H2O(1) d. none of the above
Answers
The correct answer is (a) HCN(aq) +KOH(aq) KCN(aq) +H₂O(0). In this reaction, KCN is a weak base and will form a weakly basic solution when combined with an equivalent amount of the weak acid HCN. The other reactions listed either form neutral solutions (b) or acidic solutions (c) when combined stoichiometrically.
Let us learn more about this in detail.
1. Identify the acids and bases in the reaction. In this case, HCN is the acid and KOH is the base.
2. When the acid and base react, they form a salt (KCN) and water (H₂O).
3. Determine the nature of the salt. KCN is the salt formed from the weak acid HCN and the strong base KOH.
4. A weakly basic solution is formed when the salt is the product of a weak acid and a strong base.
In this reaction, the salt KCN is formed from the weak acid HCN and the strong base KOH, resulting in a weakly basic solution.
Learn more about weakly basic solution at https://brainly.com/question/28972109
#SPJ11
The heat of vaporization of acetic acid is . calculate the change in entropy when of acetic acid boils at . be sure your answer contains a unit symbol. round your answer to significant digits.
Answers
The change in entropy ΔS when 99 g of acetic acid condenses at 118.1°C is -0.26 kJ/K.
To calculate the change in entropy of the acetic acid condensing, we can use the equation ΔS = -ΔHᵥ/T, where ΔHᵥ is the heat of vaporization, T is the temperature in Kelvin, and ΔS is the change in entropy.
First, we need to calculate the amount of moles of acetic acid in 99 g. The molar mass of acetic acid is approximately 60 g/mol, so we have:
n = 99 g / 60 g/mol = 1.65 mol
Next, we convert the temperature from Celsius to Kelvin:
T = 118.1°C + 273.15 = 391.25 K
Now, we can use the equation to calculate the change in entropy:
ΔS = -ΔHᵥ/T = -(41.0 kJ/mol) / (1.65 mol) / (391.25 K) = -0.26 kJ/K
The negative sign indicates that the process of condensation is exothermic and that the entropy of the system has decreased.
The units of entropy are joules per kelvin, so we need to include the unit symbol kJ/K in our answer. Finally, we round the answer to 2 significant digits, giving us -0.26 kJ/K.
The complete question is:
The heat of vaporization ΔHᵥ of acetic acid (HC₂H₃O₂) is 41.0 kJ/mol. Calculate the change in entropy ΔS when 99 g of acetic acid condenses at 118.1°C. Be sure your answer contains a unit symbol. Round your answer to 2 significant digits.
To know more about change in entropy, refer here:
https://brainly.com/question/28244712#
#SPJ11
Which one of these samples would have the smallest meniscus? rioja, crianza chianti classico volpolicella classico superior priorot
Answers
Rioja would likely have the smallest meniscus.
The meniscus is the curve at the top of a liquid in a glass, caused by surface tension. It is affected by factors such as alcohol content and viscosity. Rioja is a type of wine from Spain, typically made from the Tempranillo grape, which tends to have a lower alcohol content and lighter body compared to other red wines like Crianza or Priorat, which are typically fuller-bodied and higher in alcohol content.
Chianti Classico and Volpolicella Classico Superior are also red wines, but their meniscus size would likely fall somewhere in between Rioja and the fuller-bodied options. Therefore, Rioja is the most likely candidate for having the smallest meniscus among the given options. It's important to note that the size of the meniscus can vary based on several factors, including the temperature of the wine and the shape of the glass.
Learn more about meniscus here:
https://brainly.com/question/28013459
#SPJ4
the pKa of dimethylsulfone is?
Answers
The pKa of dimethylsulfone is approximately 31.
This means that dimethylsulfone is a very weak acid, as a pKa above 25 indicates that the compound is practically non-acidic.
Dimethylsulfone, also known as methylsulfonylmethane or MSM, is an organosulfur compound with the formula (CH3)2SO2. It is often used as a dietary supplement and as a solvent for various organic compounds.
The pKa value of dimethylsulfone is related to its chemical structure, which contains a highly electronegative sulfur atom that can stabilize negative charges. Knowing the pKa of a compound can be important for understanding its chemical reactivity and potential biological effects.
However, since dimethylsulfone is such a weak acid, it is unlikely to have significant acidic or basic properties under normal physiological conditions.
The pKa of dimethylsulfone is not applicable. Dimethylsulfone, also known as methylsulfonylmethane (MSM), is an organosulfur compound with the formula (CH3)2SO2. It is a white crystalline solid and is commonly used as a dietary supplement for its potential health benefits. However, it is important to note that pKa values are only relevant for compounds that can act as acids or bases, meaning they can donate or accept protons (H+ ions).
pKa is a measure of the strength of an acid in a solution, with lower values indicating stronger acids. It is defined as the negative logarithm of the acid dissociation constant (Ka), which quantifies the tendency of an acid to donate a proton. Since dimethylsulfone does not have any acidic or basic functional groups, it does not have a pKa value.
To know more about crystalline solid: brainly.com/question/28274778
#SPJ11
what is the weight, in grams, of 2 fl. oz. of a liquid having a specific gravity of 1.118?
Answers
The weight, in grams, of 2 fl. oz. of a liquid having a specific gravity of 1.118 is approximately 66.126 grams.
To calculate the weight of 2 fl. oz. of a liquid with a specific gravity of 1.118, first, we need to convert fluid ounces to milliliters and then find the mass in grams.
1 fl. oz. = 29.5735 mL
2 fl. oz. = 2 * 29.5735 mL = 59.147 mL
Specific gravity is the ratio of the density of a substance to the density of a reference substance (usually water). Since the specific gravity of the liquid is 1.118, its density is:
Density = Specific Gravity * Density of Water
Density = 1.118 * 1 g/mL = 1.118 g/mL
Now, to find the weight of the liquid in grams, we multiply the volume by the density:
Weight = Volume * Density
Weight = 59.147 mL * 1.118 g/mL = 66.126 g
So, the weight of 2 fl. oz. of the liquid with a specific gravity of 1.118 is approximately 66.126 grams.
Learn more about Specific gravity here: https://brainly.com/question/20422535
#SPJ11
Using the periodic table and your knowledge of nuclear chemistry terminology, give the symbol for lead-212
Answers
"212" represents the mass number of the isotope, "Pb" represents the chemical symbol for lead. Thus, the symbol for lead-212 is "212Pb."
The symbol for an isotope includes the atomic number, mass number, and chemical symbol of the element.
The atomic number of an element is the number of protons in its nucleus, which determines the element's identity. The mass number of an isotope is the sum of its protons and neutrons in its nucleus.
Lead has an atomic number of 82 and a number of stable isotopes. Lead-212 is an unstable isotope of lead with a mass number of 212.
The symbol for lead-212 can be written as follows:
212
Pb
For more such questions on isotope
https://brainly.com/question/14220416
#SPJ11
chem 2311 borneol rank these reagents in order of lowest hazard to most hazardous. without repeating the voluminous amount of information in the sds's, what stands ut about each compund, especially the one most hazardous?
Answers
The rank the reagents in Chem 2311 Borneol in terms of hazard levels and briefly discuss each compound, focusing on the most hazardous one. Borneol Borneol is the least hazardous among the reagents. It is a natural organic compound, often used in traditional medicine and as a flavoring agent.
The low toxicity and is generally considered safe for use. Reagent 2 Replace with the name of the second reagent This reagent has moderate hazard levels. Provide a brief description of its properties and applications. Reagent 3 Replace with the name of the most hazardous reagent This is the most hazardous reagent among the three. What stands out about this compound is its high reactivity/toxicity/corrosiveness choose the relevant property. It poses a significant risk to human health and the environment and should be handled with extreme care, following all safety guidelines. Please ensure to replace "Reagent 2" and "Reagent 3" with the actual names of the compounds you're comparing. Always follow proper safety protocols when working with chemicals and consult the Safety Data Sheets (SDS) for specific information on hazards and handling procedures.
learn more about Borneol here.
https://brainly.com/question/14286522
#SPJ11
the half cell that is normally chosen to have a potential of zero is
Answers
The half cell that is normally chosen to have a potential of zero is the standard hydrogen electrode (SHE).
The standard hydrogen electrode consists of a platinum electrode in contact with a solution of hydrogen ions at a concentration of 1 mol/L and a pressure of 1 atm of hydrogen gas. The electrode potential of the SHE is defined as 0 V at all temperatures. Other half cells are compared to the SHE to determine their electrode potentials, which can be positive or negative relative to the SHE.
The choice of the SHE as the reference electrode is based on its reproducibility and stability, as well as the fact that hydrogen ions and hydrogen gas are present in many electrochemical reactions. Using the SHE as the reference allows for accurate comparisons of electrode potentials and standardization of electrochemical measurements.
In summary, the half cell that is normally chosen to have a potential of zero is the standard hydrogen electrode, which serves as a reference electrode for electrochemical measurements.
Learn more about potential here:
https://brainly.com/question/4305583
#SPJ11
a sample of xenon gas collected at stp occupies a volume of 30.4 l. how many moles of gas does the sample contain?
Answers
The sample of xenon gas contains 1.34 moles of gas when a sample of xenon gas collected at stp occupies a volume of 30.4 l.
To solve this problem, we can use the ideal gas law, which states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature. At STP (standard temperature and pressure), the pressure is 1 atm and the temperature is 273 K.
So we can rearrange the ideal gas law to solve for n:
n = PV/RT
Plugging in the values given in the problem:
n = (1 atm)(30.4 L)/(0.0821 L·atm/mol·K)(273 K)
n = 1.34 moles
To learn more about moles click here https://brainly.com/question/31597231
#SPJ11
if the concentration of the first sample of dye 1 is less than the concentration of a second sample of dye 1, which sample has the highest absorbance?
Answers
If the concentration of the first sample of dye 1 is less than the concentration of the second sample of dye 1, the second sample has the highest absorbance. This is based on the Beer-Lambert Law, which states that absorbance is directly proportional to concentration.
Assuming that the concentration of dye 1 has a direct relationship with its absorbance, the second sample of dye 1 with the higher concentration should have the highest absorbance. This is because absorbance is directly proportional to concentration, meaning that as the concentration of a substance increases, so does its absorbance. Therefore, the sample with the higher concentration of dye 1 will have a higher absorbance than the sample with the lower concentration. The absorbance of a sample is directly proportional to its concentration, according to the Beer-Lambert Law. This means that as the concentration of a sample increases, its absorbance also increases.
Learn more about Beer-Lambert Law here:
https://brainly.com/question/30404288
#SPJ11
the ability to discern acid strength through an understanding of bonding in the molecular acid is important regardless of solvent. make the appropriate selection for each of these statements. the strongest acid in the non-aqueous solvent, acetone. hi hcl hbr the strongest acid in the non-aqueous solvent, acetone
Answers
Acid strength is determined by the strength of the acid’s bonds. The stronger the bond, the stronger the acid.
In the case of non-aqueous solvents such as acetone, the strongest acid is typically determined by the type of bond that is most stable in that particular solvent.
In the case of HI, HCl, and HBr, HCl is the strongest acid due to its strong ionic bond, which is more stable in acetone than the other two acids. HBr has a weaker bond than HI, but it is still slightly stronger than HI in acetone.
HI has the weakest bond, making it the weakest acid in this particular solvent. Therefore, HCl would be the strongest acid in the non-aqueous solvent, acetone.
Know more about Acid strength here
https://brainly.com/question/3223615#
#SPJ11