what do we mean by accretion in the context of planet formation? group of answer choices the solidification of ices, rocks, and metal from the gas of the solar nebula the formation of moons around planets the growth of planetesimals from smaller solid particles that collided and stuck together the growth of the sun as the density of gas increased in the center of the solar nebula

To simultaneously measure current and voltage across a resistor in a circuit, place an ammeter in series and a voltmeter in parallel. Therefore, the correct answer is b.

One would need to position measuring devices in particular positions to concurrently measure the current and voltage in a resistor inside a circuit. The resistor and an ammeter, which gauges electrical current, should be connected in series. This indicates that it is wired into the circuit so that current can flow through it.

A voltmeter, which measures voltage, should be connected to the circuit in parallel with the resistor so that it can measure the voltage across the resistor.

Learn more about ammeter:

https://brainly.com/question/31077503

#SPJ4

you would place an ammeter in series and a voltmeter in parallel. So, the correct answer is (a).

The correct answer is option (a). To simultaneously measure the current in the resistor and the voltage across the resistor, you would place an ammeter in series and a voltmeter in parallel. This is because the ammeter must be placed in series with the resistor to measure the current passing through it, while the voltmeter must be placed in parallel with the resistor to measure the voltage across it. By placing both instruments in series with the resistor, they can both measure their respective values simultaneously.

To know more about ammeter , click on this -

brainly.com/question/31077503

#SPJ11

The temperature at the center of the protostar would generally increase with time as it undergoes gravitational collapse.

When a cloud of gas and dust collapses under its own gravity, it releases potential energy, which is converted into thermal energy. This thermal energy causes the temperature at the center of the protostar to increase as the density of the gas and dust increases. As the temperature increases, the particles in the center of the protostar gain kinetic energy and begin to move more rapidly. This leads to an increase in the rate of collisions between particles, which further increases the temperature.

In addition, as the protostar continues to collapse, it becomes more massive, and the gravitational forces at its core become stronger. This causes the temperature at the center of the protostar to increase even further.

Learn more about  gravitational collapse.

https://brainly.com/question/30632208

#SPJ4

The temperature at the core of the protostar increases, eventually reaching a point where nuclear fusion can begin, forming a new star

Explanation - As the cloud of gas and dust collapses inward, the gravitational force increases and causes the temperature at the center of the protostar to increase. This is because the particles in the cloud are moving closer together and colliding more frequently, which results in an increase in temperature. Additionally, as the protostar continues to collapse, it becomes more compact and the pressure and temperature continue to increase until the nuclear fusion process begins, marking the birth of a star. Therefore, I would expect the temperature at the center of the protostar to increase with time.

To learn more about protostar, click on this -

brainly.com/question/28852972

#SPJ11

The translational kinetic energy of the barbell is approximately 0.12321 J (Joules).

To calculate the translational kinetic energy (K_trans) of the barbell, you can use the formula:

K_trans = (1/2) * M * V^2

Here, M represents the total mass of the barbell and V represents the speed of the center of mass.

Given that the mass (m) of each ball is 0.9 kg, the total mass (M) of the barbell would be:

M = 2 * m = 2 * 0.9 kg = 1.8 kg

The speed (V) of the center of mass of the barbell is given as 0.37 m/s.

Now, you can calculate the translational kinetic energy:

K_trans = (1/2) * 1.8 kg * (0.37 m/s)^2
K_trans = 0.9 kg * 0.1369 m^2/s^2
K_trans ≈ 0.12321 kg*m^2/s^2

For more such questions on Translational kinetic energy.

https://brainly.com/question/30107920#

#SPJ11

The radius of the bowling ball is approximately 7.65 inches.

We can use the formula for the surface area of a sphere to find the radius of the bowling ball:

Surface area of a sphere = 4πr²

where r is the radius of the sphere.

In this problem, we are given the surface area of a bowling ball, which is 232 square inches. We can use this information and the formula for surface area of a sphere to solve for the radius of the ball. Plugging this value into the formula, we get:

232 = 4πr²

Dividing both sides by 4π, we get:

r² = 58.5

Taking the square root of both sides, we get:

r ≈ 7.65 inches

To know more about surface area, here

brainly.com/question/31324403

#SPJ4

Answer:

Speed of Skater = 8.16 m/s

Explanation:

Using kinetic energy:

[tex]M_{t} = M_{skater} + m_{ball}\\\frac{1}{2}M_{t}V_{i}^2 = \frac{1}{2}*M*V_{s} ^2+\frac{1}{2}*m*V_{b}^2\\ M_{t}V_{i}^2 = M_{s}*V_{s} ^2+m_{b}*V_{b}^2\\M_{t}V_{i}^2-m_{b}*V_{b}^2 = M_{s}*V_{s} ^2\\(M_{t}V_{i}^2-m_{b}*V_{b}^2)/M_{s} = V_{s} ^2\\V_{s} = \sqrt{\frac{(M_{t}V_{i}^2-m_{b}*V_{b}^2)}{M_{s}} } \\[/tex]

This gives the skater a velocity of 8.16 m/s after throwing the ball

where

m is the mass

c is the specific heat capacity

ΔT is the change in temperature

In your problem,

m=2.5 kg

c=2.60 kJ⋅°C-1kg-1

Δ

∴ q=2.5kg×2.60 kJ⋅°C-1⋅kg-1×60°C=390 kJ

a) Object B has one-quarter the mass of Object A but the same amount of kinetic energy. Therefore, Object B must be moving faster than Object A, as it has less mass to carry the same amount of energy.

b) The kinetic energy of an object is given by:

KE = (1/2)[tex]mv^2[/tex]

where m is the mass of the object and v is its velocity. We are given that Object A has 24 J of kinetic energy, so we can write:

24 J = (1/2)m_av_[tex]a^2[/tex]

Similarly, Object B also has 24 J of kinetic energy, but with one-quarter the mass of Object A:

24 J = (1/2)(1/4)m_av[tex]_b^2[/tex]

Simplifying, we get:

v_b/v_a = sqrt(2)

Therefore, the ratio of the speeds of Object A and Object B is sqrt(2) to 1, or approximately 1.41 to 1.

c) From the work-energy theorem, we know that the work done on an object is equal to its change in kinetic energy:

W = ΔKE

If a total work of -12 J is done on each object, we can write:

-12 J = ΔKE

Using the equation for kinetic energy, we can write:

-12 J = (1/2)m_av_[tex]a^2[/tex] - (1/2)m_av_{ai[tex]}^2[/tex]

Simplifying, we get:

-24 J = m_av_a^2 - m_av_{ai[tex]}^2[/tex]

Since we are interested in the ratio of the final and initial speeds, we can divide both sides by (1/2)m_av_{ai}[tex]^2:[/tex]

-48 = (v_[tex]a^2[/tex]/v_{ai[tex]}^2[/tex]) - 1

Solving for the ratio of the final and initial speeds:

v_a/v_{ai} = sqrt(47)

Therefore, the speed of each object changes by a factor of approximately sqrt(47) if a total work of -12 J is done on each object.

Learn more about one-quarter

https://brainly.com/question/30236128

#SPJ4

Full Question ;

Object A Has 24 J Of Kinetic Energy. Object B Has One-Quarter The Mass Of Object A. A)If Object B Also Has 24 J Of Kinetic Energy, Is It Moving Faster Or Slower Than Object A? B)Find The Ratio Of The Speeds Of Objects A And B. C)By What Factor Does The Speed Of Each Object Change If Total Work -12 J Is Done On Each?

Object A has 24 J of kinetic energy. Object B has one-quarter the mass of object A.

a)If object B also has 24 J of kinetic energy, is it moving faster or slower than object A?

b)Find the ratio of the speeds of objects A and B.

c)By what factor does the speed of each object change if total work -12 J is done on each?

When measuring the pendulum period, the interface should measure the time between two adjacent blocks of the photogate. This method is used because it accurately captures the time taken for the pendulum to complete one full oscillation.

The photogate is an optical device that detects the interruption of a light beam by the pendulum bob. As the pendulum swings, it passes through the photogate and blocks the light, triggering a timing event. When the pendulum returns and blocks the light again, another timing event is triggered.

Measuring the time between these two adjacent blocks allows the interface to determine the time taken for one complete oscillation (from one extreme to the other and back). This method is reliable and precise, as it directly measures the time it takes for the pendulum to cover its full path, which is the definition of its period.

Other measurement techniques, such as recording the time of multiple oscillations and dividing by the number of cycles, can also be used. However, using the time between adjacent blocks of the photogate provides a more direct and accurate measurement of the pendulum period.

Know more about photogate here:

https://brainly.com/question/13586408

#SPJ11  

A photometer measures the intensity of light or other electromagnetic radiation.

A photometer is a device that is used to measure the intensity of light or other electromagnetic radiation. Photometers can be used to measure the brightness of a light source, the transmittance or reflectance of a material, or the spectral distribution of light.

A common type of photometer is a photomultiplier tube, which uses a photocathode to convert incoming photons into electrons. The electrons are then accelerated and amplified through a series of dynodes, resulting in a large output signal that can be measured and used to quantify the intensity of the incoming light.

The statement about saturation in the original question may be referring to the maximum amplification that can be achieved by the photomultiplier tube, which is determined by the number and geometry of the dynodes. In this context, saturation would occur when the amplification reaches its maximum value and can no longer be increased.

Learn more about photometer

brainly.com/question/28271716

#SPJ11

To determine the minimum and maximum positions of the particle, we need to know more information about the system. However, we can use the principle of conservation of energy to make some observations.

Since the total mechanical energy of the particle is negative, we know that the particle must be in a state of potential energy greater than its kinetic energy. This means that the particle could be at the top of a hill, for example, where it has a large potential energy but a small kinetic energy. Alternatively, the particle could be in a region of space where there is a large attractive force acting on it, such as a gravitational or electric field, which could also contribute to a negative total mechanical energy. Without more information, it is not possible to determine the exact minimum and maximum positions of the particle. Conservation of energy is a fundamental law of physics stating that energy cannot be created or destroyed, only transformed from one form to another or transferred from one object to another.

Learn more about conservation of energy here:

https://brainly.com/question/11573747

#SPJ11

Assuming that the particle is subject to conservative forces, the total mechanical energy E of the particle is the sum of its kinetic energy and potential energy. Mathematically,

E = K + U

where K is the kinetic energy of the particle, and U is its potential energy.

Since the total mechanical energy E of the particle is given as -8 J, we have:

E = -8 J

Let's assume that the potential energy U has a minimum value of Umin and a maximum value of Umax.

Then we can write:

E = K + Umin (at the minimum position)

E = K + Umax (at the maximum position)

Subtracting the first equation from the second equation, we get:

E = (K + Umax) - (K + Umin)

E = Umax - Umin

Substituting the value of E, we get:

-8 J = Umax - Umin

This means that the difference between the maximum potential energy and the minimum potential energy is 8 J.

Since potential energy is a relative quantity, we can choose any point as a reference and assign it a potential energy of zero.

Let's assume that the minimum potential energy occurs at this reference point.

Then we can say:

Umin = 0 J

Umax = 8 J

Substituting these values in the equations for E, we get:

-8 J = K + 0 J (at the minimum position)

-8 J = K + 8 J (at the maximum position)

Solving for K, we get:

K = -8 J (at the minimum position)

K = -16 J (at the maximum position)

Since kinetic energy is always non-negative, the second equation is not physically possible. Therefore, the particle cannot reach the position where its kinetic energy is -16 J.

Therefore, the minimum position of the particle is the point where its kinetic energy is -8 J, and the maximum position is the point where its potential energy is 8 J.

To know more about conservative forces visit link :

https://brainly.com/question/31171503

#SPJ11

Answer: The apple is lifted approximately 0.1232 m (rounded to four decimal places).

Explanation: To find the distance the apple is lifted, we can use the formula for work: work = force x distance.

The force required to lift the apple is equal to the weight of the apple, which can be calculated using the formula:

weight = mass x acceleration due to gravity.

we have work = weight x distance, 5.4 J = (0.178 kg x 9.81 m/s^2) x distance.

Solving for distance, we get a distance ≈ of 0.1232 m (rounded to four decimal places).

Here is an article on work, force, and distance in physics: https://byjus.com/physics/work-energy-power/#:~:text=The%20work%20done%20by%20a,only%20magnitude%20and%20no%20direction.

To calculate the power, in diopters, of eyeglasses that will correct vision when held 1.50 cm from the eyes, you need to know the individual's refractive error in diopters.

Refractive error refers to the degree of near sightedness (myopia), farsightedness (hyperopia), or astigmatism that an individual has. This value is typically measured by an optometrist or ophthalmologist using a phoropter.

Once the refractive error is known, the power of the corrective eyeglasses can be determined by dividing the refractive error by the distance (in meters) between the glasses and the eyes. In this case, since the glasses are held 1.50 cm from the eyes, the distance in meters would be 0.015 meters.

For example, if the individual has a refractive error of -2.00 diopters, the power of the corrective eyeglasses when held 1.50 cm from the eyes would be -2.00 / 0.015 = -133.33 diopters.

To know more about Refractive error:

https://brainly.com/question/30162760

#SPJ11

Answer:

Explanation: honestly i don’t speak spanish so please explain with english

I believe that this seismogram was collected within 100 km of the epicenter because surface waves don't travel far from epicenter, the correct option is A.

A seismogram is a graphical representation of the ground motion caused by seismic waves generated from earthquakes or other sources. The most likely explanation for the seismogram being collected within 100 km of the epicenter. Surface waves, which include Rayleigh waves and Love waves, are the slowest and most destructive seismic waves, but they do not travel far from the epicenter.

In contrast, p-waves and s-waves can travel long distances through the earth's interior, but their arrival times and wave characteristics can be used to estimate the distance from the epicenter. Since the seismogram shows clear signals of surface waves, it is more likely that it was collected within 100 km of the epicenter where the surface waves are still strong, the correct option is A.

To learn more about epicenter the link:

https://brainly.com/question/28136716

#SPJ4

The complete question is:

I believe that this seismogram was collected within 100 km of the epicenter because: (group of answer choices)

A) surface waves don't travel far from epicenter

B) the second train of p-waves at point b indicates reflection from a shallow soft layer

C) the first p-wave is upwards indicating a nearby push

D) the s-waves arrived before the p-waves

The region from the origin to the elastic limit on an applied force versus elongation graph for a typical metal under tension is referred to as the elastic region.

In this region, the metal behaves elastically, meaning that it can be stretched or deformed under applied force, but will return to its original shape once the force is removed.

The elastic limit is the point at which the metal begins to behave plastically, meaning that it will not return to its original shape after being stretched or deformed.

Beyond the elastic limit, the metal will undergo permanent deformation and may eventually fail.

Understanding the behavior of metals in the elastic region is important for designing structures and products that can withstand applied forces without failing.

The elastic region is the area from the origin to the elastic limit on an applied force versus elongation graph for a typical metal under tension.

For more such answers on Elastic Region

https://brainly.com/question/15318192

#SPJ11

A steam engine ( Carnot engine ) has an efficiency of 73%. If the waste heat has a temperature of 24◦C, the temperature of the boiler is 827.41°C.

Both 121°C (250°F) and 132°C (270°F) are commonly used steam sterilising temperatures. For a short period of time, these temperatures (and other high temperatures) must be held in order to destroy microbes.

efficiency = 1 - (Temp_cold / Temp_hot)

Temp_cold = 24°C + 273.15 = 297.15 K

efficiency of 73%.=  .73

Tem_hot = T_cold / (1 - efficiency)= 297.15 K / (1 - 0.73)

Tem_hot = 1100.56 K

Finally, by deducting 273.15, we may change the temperature of the hot reservoir back to Celsius:

Tem_hot = 1100.56 K - 273.15 = 827.41°C

hence, he temperature of the boiler is 827.41°C.

To know more about temperature of the boiler visit:-

https://brainly.com/question/14285341

#SPJ1

The initial speed of the first ball was approximately 14.7 m/s.

When the first ball is thrown straight up, it will follow a path determined by the acceleration due to gravity, which is constant at -9.8 m/s². Using the kinematic equation d = vit + 1/2at², we can calculate the height the ball reaches in 1 second:

Since the ball was thrown from a height of 20 meters, its maximum height can be found by subtracting the initial height from the height reached:

When the ball falls back down to the ground, it will cover the same distance as the second ball that was dropped from the roof:

Using the kinematic equation v² = u² + 2as and substituting the known values, we can solve for the initial velocity of the first ball:

Since the velocity is negative, it means that the ball is moving downwards. Therefore, the initial speed of the first ball was approximately 14.7 m/s.

To learn more about speed, here

https://brainly.com/question/28224010

#SPJ4

The distribution of cones at the point of image formation is crucial in resolving two point sources

To resolve two point sources, a distribution of cones must occur where the image strikes the retina. Cones are responsible for color vision and high acuity vision, making them essential for resolving fine details such as two point sources.

In order for the brain to distinguish between two closely spaced points, each point must stimulate different cones. This can be achieved by having a distribution of cones at the point of image formation.

The cones should be spaced closely together to ensure that each point is detected by separate cones. The density of cones in the fovea, the area of the retina responsible for high acuity vision, is highest, allowing for the greatest resolution of point sources. .

To learn more about : distribution

https://brainly.com/question/28027633

#SPJ11

The type of bar optic you are describing is commonly known as a "free flow pourer" or "free pour spout."

These types of pourers do not have a specific amount they dispense but instead rely on the bartender's skill to regulate the flow of liquid by applying and releasing pressure on the bottle. The flow of liquid stops when pressure is released, allowing for precise and controlled pouring.

Free flow pourers are commonly used in bars and restaurants to pour spirits, mixers, and other liquids into cocktails and drinks. They can come in a variety of sizes and materials, including plastic, metal, and silicone, and are easily replaceable when worn or damaged.

Learn more about bar optic

https://brainly.com/question/30694096

#SPJ4

The period between maximum sunspot numbers is roughly half the length of the full solar cycle.

To understand the difference between the period between maximum sunspot numbers and the period of the full solar cycle. The period between maximum sunspot numbers refers to the time it takes for sunspot activity to reach its peak levels, and then decrease back to minimum levels. This period is approximately 11 years.

The full solar cycle, on the other hand, is the time it takes for the sun's magnetic field to complete a full cycle, which includes both increasing and decreasing sunspot activity. This period is approximately 22 years.

In summary, the period between maximum sunspot numbers focuses on the time it takes for sunspot activity to reach its peak and then decrease, while the full solar cycle considers the entire process of the sun's magnetic field cycle. The period between maximum sunspot numbers is roughly half the length of the full solar cycle.

More on sunspot: https://brainly.com/question/29125391

#SPJ11

The smallest angle at which you would get destructive interference when 550 nm light passes two slits 50 μm apart is 0.32°.

The condition for destructive interference is gotten  by:

Δϕ = 2πΔx/λ = π

where Δx=  path difference between the two slits,

λ =  wavelength of light,

and Δϕ =  phase difference.

λ/2 = Δx sinθ

Here, θ is the angle between the incident light and the line connecting the center of the slits to the point of interest on the screen.

sinθ = (λ/2) / Δx = (550 nm / 2) / (50 μm) = 0.0055

θ = sin⁻¹(0.0055) = 0.32°

Learn more about incident light at: https://brainly.com/question/15838784

#SPJ1

The magnitude of the average angular acceleration of the fan is 2.24 rad/s2 . So the correct answer is option: b.

The average angular acceleration can be calculated using the formula:

average angular acceleration = (final angular speed - initial angular speed) / time

Plugging in the given values, we get:

average angular acceleration = (4.4 rad/s - 10 rad/s) / 2.50 s

average angular acceleration = -2.56 rad/s2

Note that the negative sign indicates that the angular acceleration is in the opposite direction to the initial angular velocity.

|average angular acceleration| = 2.56 rad/s2 ≈ 2.24 rad/s2 .

Therefore, the correct answer is (b).

To know more about magnitude, here

brainly.com/question/14452091

#SPJ4

False. Here is a step-by-step explanation:

1) Relative dating methods and absolute dating methods are two types of techniques used by geologists to determine the age of rocks and fossils.

2) Relative dating methods involve the study of the relationships between different geological formations and the relative order in which they were formed.

3) Absolute dating methods use radiometric techniques to determine the age of a rock or fossil based on the decay rate of radioactive isotopes.

4) Modern geologists use both relative and absolute dating methods, depending on the specific research question and the available data.

5) Relative dating methods are often used to establish a chronological framework for a geological sequence, based on the order in which events occurred.

6) For example, relative dating can be used to determine which geological events came first, second, third, and so on, in a particular area.

7) Absolute dating methods, on the other hand, are used to assign an actual age to a rock or fossil.

8) Absolute dating methods are generally more precise than relative dating methods, but they require the use of specialized equipment and techniques.

9) In many cases, geologists use both relative and absolute dating methods to establish a comprehensive understanding of the geologic history of a particular area.

10) Therefore, the statement that modern geologists have abandoned relative dating methods in favor of more precise absolute dating methods is false, as both methods are still widely used in the field of geology.

To know more about Modern geologists :

https://brainly.com/question/28274168

#SPJ11

A solid sphere and a spherical shell with the same radius and mass rolling down a frictionless ramp will land farther is  solid sphere

The moment of inertia of a solid sphere is (2/5)mr^2, while that of a spherical shell is (2/3)mr^2, where m is the mass and r is the radius.  When rolling down the ramp, these objects convert potential energy into kinetic energy, which includes both translational and rotational components. The total kinetic energy of a rolling object is K = (1/2)mv^2 + (1/2)Iω^2, where v is the linear velocity, ω is the angular velocity, and I is the moment of inertia.

Since the solid sphere has a lower moment of inertia, it is more efficient at converting potential energy into translational kinetic energy. This results in the solid sphere reaching a higher linear velocity than the spherical shell, causing it to reach the bottom of the ramp more quickly and land farther compared to the spherical shell. A solid sphere and a spherical shell with the same radius and mass rolling down a frictionless ramp will land farther is solid sphere.

Learn more about kinetic energy at:

https://brainly.com/question/22174271

#SPJ11

A mosquito collides head-on with a car traveling 60 mph. Is the magnitude of the mosquito's acceleration larger than, smaller than, or equal to the magnitude of the car's acceleration

The magnitude of a mosquito's acceleration compared to a car's acceleration when they collide head-on.

1. When the mosquito and the car collide head-on, they both experience a force due to the collision.
2. According to Newton's second law of motion (F = ma), the acceleration (a) of an object is directly proportional to the force (F) applied and inversely proportional to the object's mass (m).
3. In this case, the mosquito has a much smaller mass than the car.
4. Therefore, even though they experience the same force, the mosquito's acceleration will be much larger due to its significantly smaller mass.

Your answer: The magnitude of the mosquito's acceleration is larger than the magnitude of the car's acceleration. (Option a)

To know more about Magnitude:

https://brainly.com/question/2596740

#SPJ11

Based on its appearance in the visible-light view, M82 is classified as an irregular galaxy.

A galaxy is a vast collection of stars, gas, dust, and dark matter that are held together by gravity. Galaxies come in many different shapes and sizes, and they can contain anywhere from a few million to hundreds of billions of stars.

Based on its appearance in the visible-light view, M82 is an irregular galaxy. It has a distorted, asymmetric shape and lacks the clear spiral or elliptical structure that defines those types of galaxies. Its irregular shape suggests that it has experienced some kind of disturbance or interaction with other galaxies in the past.

Learn more about galaxy:

https://brainly.com/question/31459444

#SPJ11

After switch S is closed, the capacitors in the circuit start to discharge.

The initial stored energy in the capacitors is given by [tex]1/2*C*V^2[/tex],

where C is the capacitance of the capacitors and V is the initial voltage across them.

As the capacitors discharge, the voltage across them decreases and so does the stored energy.

When the capacitors have lost 80.0% of their initial stored energy, the voltage across them will be 0.447 times the initial voltage.

At this point, the current in the circuit can be calculated using Ohm's law, which states that the current is equal to the voltage divided by the total resistance of the circuit.

Therefore, the current in the circuit at this point can be calculated as I = V/R, where V is the voltage across the capacitors and R is the total resistance of the circuit.

For more such answers on Capacitance
https://brainly.com/question/16998502

#SPJ11

The thermal energy produced by friction is equal to the magnitude of this work, or 60.8 kJ.

The work done by friction is equal to the change in the kinetic energy of the crate, which is zero because it slides down the ramp at a constant speed. Therefore, the friction force does negative work equal in magnitude to the work done by the gravitational force on the crate:

W_friction = -W_gravity

where

W_gravity = mgh

and h is the vertical distance that the crate slides down the ramp:

h = 12 sin 35° = 6.93 m

Thus,

W_friction = -mgh = -(900 N)(6.93 m)(9.81 m/s^2) = -60.8 kJ

The negative sign indicates that the work done by friction is in the opposite direction to the displacement of the crate, which is down the ramp. The thermal energy produced by friction is equal to the magnitude of this work, or 60.8 kJ.

Learn more about thermal energy

https://brainly.com/question/18989562

#SPJ4