Answer:
Option A
Explanation:
Silicon (Obtained from Sand (SiO2)) is the element that is primarily used in appliances to make electronic chips.
Answer:
A. Silicon (Si)
Explanation:
Silicon (Si) is primarily used as a semiconductor material to make electronic chips.
The displacement of a bromine atom by an amine is a substituion reaction. Write out the mechanism of this reaction (2-->3) Why might you expect that the reaction you have performed, using t-BuNH2, to be much slower than the same reaction using methylamine
Answer:
An alkyl halide can undergo SN2 reaction with an amine
Explanation:
The displacement of a bromine atom by an an amine (step 2---> 3) in the reaction sequence is an example of an SN2 reaction in which the amine is the nucleophile.
The nitrogen atom of the amine which bears a lone pair of electrons functions as the nucleophile and attacks the electrophilic carbon atom of the alkyl halide displacing the bromide and creating a new Carbon-Nitrogen bond. An ammonium intermediate is immediately formed and the reaction is completed by the abstraction of a hydrogen by a base (such as excess amine present in the system).
This reaction is slower with t-BuNH2 because of steric hindrance and steric crowding in the transition state. SN2 reactions are faster with methylamine where the alkyl carbon is easily accessible.
The detailed mechanism of this reaction has been attached to this answer.
A diode has IS = 10−17 A and n = 1.05. (a) What is the diode voltage if the diode current is 70 μA? (b) What is the diode current for VD = 0.1 mV?
Answer:
(a) The diode voltage, [tex]V_D =[/tex] 0.776 V
(b) The diode current, [tex]I_D =[/tex] 3.81 x 10⁻²⁰ A
Explanation:
Given;
saturation current in diode, [tex]I_s[/tex] = 10⁻¹⁷ A
nonideality factor, n = 1.05
(a) the diode voltage
Given diode current, [tex]I_D[/tex] = 70 μA = 7 x 10⁻⁶ A
Diode voltage is calculated as;
[tex]V_D = nV_Tln(1+ \frac{I_D}{I_S} )[/tex]
Where;
[tex]V_T[/tex] is thermal voltage at 25°C = 0.025
[tex]V_D = 1.05 * 0.025 ln(1+ \frac{70*10^{-6}}{1*10^{-17}})\\\\V_D = 0.02625ln(1+ 7*10^{12})\\\\V_D = 0.776 \ V[/tex]
b) the diode current for VD = 0.1 mV
[tex]V_D = nV_Tln(1 +\frac{I_D}{I_S} )\\\\ln(1 +\frac{I_D}{I_S} ) = \frac{V_D}{nV_T} \\\\ln(1 +\frac{I_D}{I_S} ) = \frac{0.1*10^{-3}}{1.05*0.025} \\\\ln(1 +\frac{I_D}{I_S} ) = 0.00381\\\\1 +\frac{I_D}{I_S} = e^{0.00381}\\\\1+ \frac{I_D}{I_S}= 1.00381\\\\ \frac{I_D}{I_S}=1.00381 - 1\\\\ \frac{I_D}{I_S}= 0.00381\\\\I_D = 0.00381(I_S)\\\\I_D = 0.00381(10^{-17})\\\\I_D = 3.81*10^{-20} \ A[/tex]
If a bottle of olive oil contains 1.2 kg of olive oil, what is the volume, in milliliters (mL), of the olive oil?
Answer:
1.3 mL
Explanation:
First, get the density of the olive oil, which is 0.917 kg/mL. Then divide the mass by the density:
1.2kg/0.917kg/mL= 1.3086150491 mL. The kg cancel out, leaving us with mL.
It should have 2 significant figures, because 1.2kg has 2 and we are dividing.
The volume of olive oil will be nearly 1300mL or 1.30 L as per the given data.
What is volume?Volume is a measurement of three-dimensional space that is occupied. It is frequently numerically quantified using SI derived units or various imperial units. The definition of length is linked to the definition of volume.
Volume is, at its most basic, a measure of space. The units liters (L) and milliliters (mL) are used to measure the volume of a liquid, also known as capacity.
This measurement is done with graduated cylinders, beakers, and Erlenmeyer flasks.
Here, it is given that mass of olive oil is 1.2kg.
We know that,
Density of olive oil = 0.917kg/l.
Volume = mass/density
Volume = 1.2/0.917.
Volume = 1.30 lit.
Volume = 1300mL.
Thus, the volume of olive oil will be 1300 mL.
For more details regarding volume, visit:
https://brainly.com/question/1578538
#SPJ2
Write a balanced equation for the single-replacement oxidation-reduction reaction described, using the smallest possible integer coefficients. The reaction that takes place when chlorine gas combines with aqueous potassium bromide. (Use the lowest possible coefficients. Omit states of matter.)
Answer:
[tex]\rm Cl_2 + 2\; KBr \to Br_2 + 2\; KCl[/tex].
One chlorine molecule reacts with two formula units of (aqueous) potassium bromide to produce one bromine molecule and two formula units of (aqueous) potassium chloride.
Explanation:
Formula for each of the speciesStart by finding the formula for each of the compound.
Both chlorine [tex]\rm Cl[/tex] and bromine [tex]\rm Br[/tex] are group 17 elements (halogens.) Each On the other hand, potassium [tex]\rm K[/tex] is a group 1 element (alkaline metal.) EachTherefore, the ratio between [tex]\rm K[/tex] atoms and [tex]\rm Br[/tex] atoms in potassium bromide is supposed to be one-to-one. That corresponds to the empirical formula [tex]\rm KBr[/tex]. Similarly, the ratio between
The formula for chlorine gas is [tex]\rm Cl_2[/tex], while the formula for bromine gas is [tex]\rm Br_2[/tex].
Balanced equation for the reactionWrite down the equation using these chemical formulas.
[tex]\rm ?\; Cl_2 + ?\; KBr \to ?\;Br_2 + ?\; KCl[/tex].
Start by assuming that the coefficient of compound with the largest number of elements is one. In this particular equation, both [tex]\rm KBr[/tex] and [tex]\rm KCl[/tex] features two elements each.
Assume that the coefficient of [tex]\rm KCl[/tex] is one. Hence:
[tex]\rm ?\; Cl_2 + 1 \; KBr \to ?\;Br_2 + ?\; KCl[/tex].
Note that [tex]\rm KBr[/tex] is the only source of [tex]\rm K[/tex] and [tex]\rm Br[/tex] atoms among the reactants of this reaction.
There would thus be one [tex]\rm K[/tex] atom and one [tex]\rm Br[/tex] atom on the reactant side of the equation.
Because atoms are conserved in a chemical equation, there should be the same number of [tex]\rm K[/tex] and [tex]\rm Br[/tex] atoms on the product side of the equation.
In this reaction, [tex]\rm Br_2[/tex] is the only product with [tex]\rm Br[/tex] atoms.
One [tex]\rm Br[/tex] atom would correspond to [tex]0.5[/tex] units of [tex]\rm Br_2[/tex].
Similarly, in this reaction, [tex]\rm KCl[/tex] is the only product with [tex]\rm K[/tex] atoms.
One [tex]\rm K[/tex] atom would correspond to one formula unit of [tex]\rm KCl[/tex].
Hence:
[tex]\displaystyle \rm ?\; Cl_2 + 1 \; KBr \to \frac{1}{2}\;Br_2 + 1\; KCl[/tex].
Similarly, there should be exactly one [tex]\rm Cl[/tex] atom on either side of this equation. The coefficient of [tex]\rm Cl_2[/tex] should thus be [tex]0.5[/tex]. Hence:
[tex]\displaystyle \rm \frac{1}{2}\; Cl_2 + 1 \; KBr \to \frac{1}{2}\;Br_2 + 1\; KCl[/tex].
That does not meet the requirements, because two of these coefficients are not integers. Multiply all these coefficients by two (the least common multiple- LCM- of these two denominators) to obtain:
[tex]\displaystyle \rm 1\; Cl_2 + 2 \; KBr \to 1\;Br_2 + 2\; KCl[/tex].
bleaching powder reaction, mechanism, use
Answer:
Bleaching Powder's chemical formula is CaOCl2 and is called Calcium Oxychloride. It is prepared on dry slaked lime by chlorine gas. 2. ... It gives calcium chloride, chlorine and water when bleaching powder reacts with hydrochloric acid.
Explanation:
Which of the following metals has a low melting point?
2 A. Rubidium
B. Potassium
C. Calcium
D. Sodium
Answer:
Rubidium
Explanation:
Determine the volume occupied by 10 mol of helium at 27 ° C and 82 atm
please.
Answer:
3.00 L
Explanation:
Convert the pressure to Pascals.
P = 82 atm × (101325 Pa/atm)
P = 8,308,650 Pa
Convert temperature to Kelvins.
T = 27°C + 273
T = 300 K
Use ideal gas law:
PV = nRT
(8,308,650 Pa) V = (10 mol) (8.314 J/mol/K) (300 K)
V = 0.00300 m³
If desired, convert to liters.
V = (0.00300 m³) (1000 L/m³)
V = 3.00 L
Answer:
[tex]\large \boxed{\text{3.0 L}}[/tex]
Explanation:
[tex]\begin{array}{rcl}pV &=& nRT\\\text{82 atm} \times V & = & \text{10 mol} \times \text{0.082 06 L}\cdot\text{atm}\cdot\text{K}^{-1}\text{mol}^{-1} \times \text{300.15 K}\\82V & = & \text{246 L}\\V & = & \textbf{3.0 L} \\\end{array}\\\text{The volume of the balloon is $\large \boxed{\textbf{3.0 L}}$}[/tex]
Which phase change is an example of an exothermic process?
A.
solid to liquid
B.
solid to gas
C.
liquid to solid
D.
liquid to gas
E.
solid to plasma
Reset
Answer:
C
Explanation:
Turning liquid to a solid is like freezing water to ice and requires the water to LOSE (release) heat causing an exothermic reaction.
A base solution contains 0.400 mol of OH–. The base solution is neutralized by 43.4 mL of sulfuric acid. What is the molarity of the sulfuric acid solution?
Answer:
Molarity of the sulfuric acid solution is 4.61M
Explanation:
The neutralization of a base of OH⁻ with sulfuric acid, H₂SO₄, occurs as follows:
2 OH⁻ + H₂SO₄ → 2H₂O + SO₄²⁻
That means, 2 moles of base react with 1 mole of sulfuric acid.
If you add 0.400 moles of OH⁻, moles of sulfuric acid you need to neutralize this amount of OH⁻ are:
0.400 moles OH⁻ ₓ (1 mole H₂SO₄ / 2 moles OH⁻) = 0.200 moles of H₂SO₄
As you add 43.4mL = 0.0434L of sulfuric acid to neutralize this solution, molarity (Ratio between moles and liters) is:
0.200 moles H₂SO₄ / 0.0434L = 4.61M
Molarity of the sulfuric acid solution is 4.61Msuppose you are titrating vinegar, which is an acetic acid solution
Answer:
0.373 M
Explanation:
The balanced equation for the reaction is given below:
HC2H3O2 + NaOH —> NaC2H3O2 + H2O
From the balanced equation above, the following were obtained:
Mole ratio of the acid, HC2H3O2 (nA) = 1
Mole ratio of the base, NaOH (nB) = 1
Next, we shall write out the data obtained from the question. This include:
Volume of base, NaOH (Vb) = 32.17 mL
Molarity of base, NaOH (Mb) = 0.116 M
Volume of acid, HC2H3O2 (Va) = 10 mL
Molarity of acid, HC2H3O2 (Ma) =..?
The molarity of the acid solution can be obtained as follow:
MaVa/MbVb = nA/nB
Ma x 10 / 0.116 x 32.17 = 1
Cross multiply
Ma x 10 = 0.116 x 32.17
Divide both side by 10
Ma = (0.116 x 32.17) /10
Ma = 0.373 M
Therefore, the concentration of the acetic acid is 0.373 M.
Which Group is in the second column of the periodic table?
A. Noble gases
B. Halogens
C. Alkali metals
D. Alkaline earth metals
Answer:
Hey there!
That would be the alkaline earth metals.
Hope this helps :)
Answer: alkaline earth metals
Explanation:
what bsic difference is between NMR and MS spectroscopic techniques?
Answer:
The Nuclear magnetic resonance is the process this technique does not use radiation.
The ms is an sensitive technology can be a massive number and small sample of the blood.
Explanation:
The Nuclear magnetic resonance we look at the both side of that coin.
The technique provides that fatty acid composition and various including amino acids.
These are contain the complementary these biomarkers, that are suitable for all kinds of studies. there are many types of research:-
(1) A powerful tool metabolic (2) A versatile tool research (3) Quick analysis (4) Low cost analysis.
The MS is an extremely sensitive technology using a very small number of the blood.
(1) Powerful techniques (2) Highly method (3) Large number of metabolites (4)Small sample volume
MS can be fine mapping metabolic pathways to sign analytical strategy.
Content attribution
QUESTION 2 • 1 POINT
Which anion would bond with K+ in a 1: 1 ratio to form a neutral ionic compound?
The given question is incomplete. The complete question is :
Which anion would bond with K+ in a 1: 1 ratio to form a neutral ionic compound?
a) [tex]O^{2-}[/tex]
b) [tex]F^{-}[/tex]
c) [tex]N^{3-}[/tex]
d) [tex]S^{2-}[/tex]
Answer: b) [tex]F^{-}[/tex]
Explanation:
For formation of a neutral ionic compound, the charges on cation and anion must be balanced. The cation is formed by loss of electrons by metals and anions are formed by gain of electrons by non metals.
Here potassium is having an oxidation state of +1 called as cation and thus is an anion must have an oxidation state of -1 if they have to combine in 1: 1 ratio to give neutral ionic compound.
Thus the anion has to be [tex]F^-[/tex] which combines with [tex]K^+[/tex] in 1: 1 ratio to give [tex]KF[/tex]
The heat of vaporization of 1-pentanol is 55.5 kJ/mol, and its entropy of vaporization is 148 J/K.mol. What is the approximate boiling point of 1-pentanol? 100 oC 375 oC 0 oC 25 oC
Answer:
Approximately 100 °C.
Explanation:
Hello,
In this case, since the entropy of vaporization is computed in terms of the heat of vaporization and the temperature as:
[tex]\Delta S_{vap}=\frac{\Delta H_{vap}}{T}[/tex]
We can solve for the temperature as follows:
[tex]T=\frac{\Delta H_{vap}}{\Delta S_{vap}}[/tex]
Thus, with the proper units, we obtain:
[tex]T=\frac{55500J/mol}{148J/(mol*K)} =375K\\\\T=102 \°C[/tex]
Hence, answer is approximately 100 °C.
Best regards.
How long should you hold the iron on the hair to heat the strand and set the base ?
A) 5 seconds
B) 15 seconds
C) 30 seconds
D) 1 minute
Explain the term isomers?
Answer:
Isomers are molecules that have the same molecular method, however have a unique association of the atoms in space. That excludes any extraordinary preparations which can be sincerely because of the molecule rotating as an entire, or rotating about precise bonds.
For dinner you make a salad with lettuce, tomatoes, cheese, carrots, and
croutons. Your salad would be classified as a(n)
O A. compound
OB. element
OC. homogeneous mixture
D. heterogeneous mixture
A heterogeneous mixture
Give the major organic products from the oxidation with KMnO4 for the following compounds. Assume an excess of KMnO4.
a) ethylbenzene
b) m-Xylene (1,3- dimethylbenzene)
c) 4-Propyl-3-t-butyltoluene
Answer:
Explanation:
a ) Benzoic acid is formed . In any alkyl benzene derivative , potassium permanganate reacts to form carboxylic acid . It oxidises side chains to carboxylic acid .
C₆H₅CH₃ + 0 = C₆H₅COOH + H₂O
O is provided by KMnO₄
b ) In this reaction isophthalic acid is formed .
C₆H₄(CH₃)₂ +O = C₆H₄(COOH)₂
c)
4-Propyl-3-t-butyltoluene
In this oxidation , three side chains of ring are 1 ) 1-methyl 2 ) 3- butyl 3 ) 4 propyl .
The methyl and 4 - propyl groups are oxidised to di- carboxylic acid and 3 butyl group remains intact ( unoxidised )
A sample of an unknown gas effuses in 11.1 min. An equal volume of H2 in the same apparatus at the same temperature and pressure effuses in 2.42 min. What is the molar mass of the unknown gas
Answer:
Molar mass of the gas is 0.0961 g/mol
Explanation:
The effusion rate of an unknown gas = 11.1 min
rate of [tex]H_{2}[/tex] effusion = 2.42 min
molar mass of hydrogen = 1 x 2 = 2 g/m
molar mas of unknown gas = ?
From Graham's law of diffusion and effusion, the rate of effusion and diffusion is inversely proportional to the square root of its molar mass.
from
[tex]\frac{R_{g} }{R_{h} }[/tex] = [tex]\sqrt{\frac{M_{h} }{M_{g} } }[/tex]
where
[tex]R_{h}[/tex] = rate of effusion of hydrogen gas
[tex]R_{g}[/tex] = rate of effusion of unknown gas
[tex]M_{h}[/tex] = molar mass of H2 gas
[tex]M_{g}[/tex] = molar mass of unknown gas
substituting values, we have
[tex]\frac{11.1 }{2.42 }[/tex] = [tex]\sqrt{\frac{2 }{M_{g} } }[/tex]
4.587 = [tex]\sqrt{\frac{2 }{M_{g} } }[/tex]
[tex]\sqrt{M_{g} }[/tex] = [tex]\sqrt{2}[/tex]/4.587
[tex]\sqrt{M_{g} }[/tex] = 0.31
[tex]M_{g}[/tex] = [tex]0.31^{2}[/tex] = 0.0961 g/mol
The molar mass of the unknown gas will be "0.0961 g/mol".
Given:
Effusion rate of unknown gas,
[tex]R_g = 11.1 \ min[/tex]Effusion rate of [tex]H_2[/tex],
[tex]R_h = 2.42 \ min[/tex]Molar mass of hydrogen,
[tex]M_h = 1\times 2[/tex][tex]= 2 \ g/m[/tex]
According to the Graham's law, we get
→ [tex]\frac{R_g}{R_h} = \sqrt{\frac{M_h}{M_g} }[/tex]
By substituting the values, we get
→ [tex]\frac{11.1}{2.42} = \sqrt{\frac{2}{M_g} }[/tex]
→ [tex]4.587=\sqrt{\frac{2}{M_g} }[/tex]
→ [tex]\sqrt{M_g} = \sqrt{\frac{2}{4.587} }[/tex]
[tex]\sqrt{M_g} = 0.31[/tex]
[tex]M_g = 0.0961 \ g/mol[/tex]
Thus the above solution is right.
Learn more:
https://brainly.com/question/6019799
A strontium hydroxide solution is prepared by dissolving 10.60 gg of Sr(OH)2Sr(OH)2 in water to make 47.00 mLmL of solution.What is the molarity of this solution? Express your answer to four significant figures and include the appropriate units.
Answer:
Approximately [tex]1.854\; \rm mol\cdot L^{-1}[/tex].
Explanation:
Note that both figures in the question come with four significant figures. Therefore, the answer should also be rounded to four significant figures. Intermediate results should have more significant figures than that.
Formula mass of strontium hydroxideLook up the relative atomic mass of [tex]\rm Sr[/tex], [tex]\rm O[/tex], and [tex]\rm H[/tex] on a modern periodic table. Keep at least four significant figures in each of these atomic mass data.
[tex]\rm Sr[/tex]: [tex]87.62[/tex].[tex]\rm O[/tex]: [tex]15.999[/tex].[tex]\rm H[/tex]: [tex]1.008[/tex].Calculate the formula mass of [tex]\rm Sr(OH)_2[/tex]:
[tex]M\left(\rm Sr(OH)_2\right) = 87.62 + 2\times (15.999 + 1.008) = 121.634\; \rm g \cdot mol^{-1}[/tex].
Number of moles of strontium hydroxide in the solution[tex]M\left(\rm Sr(OH)_2\right) =121.634\; \rm g \cdot mol^{-1}[/tex] means that each mole of [tex]\rm Sr(OH)_2[/tex] formula units have a mass of [tex]121.634\; \rm g[/tex].
The question states that there are [tex]10.60\; \rm g[/tex] of [tex]\rm Sr(OH)_2[/tex] in this solution.
How many moles of [tex]\rm Sr(OH)_2[/tex] formula units would that be?
[tex]\begin{aligned}n\left(\rm Sr(OH)_2\right) &= \frac{m\left(\rm Sr(OH)_2\right)}{M\left(\rm Sr(OH)_2\right)}\\ &= \frac{10.60\; \rm g}{121.634\; \rm g \cdot mol^{-1}} \approx 8.71467\times 10^{-2}\; \rm mol\end{aligned}[/tex].
Molarity of this strontium hydroxide solutionThere are [tex]8.71467\times 10^{-2}\; \rm mol[/tex] of [tex]\rm Sr(OH)_2[/tex] formula units in this [tex]47\; \rm mL[/tex] solution. Convert the unit of volume to liter:
[tex]V = 47\; \rm mL = 0.047\; \rm L[/tex].
The molarity of a solution measures its molar concentration. For this solution:
[tex]\begin{aligned}c\left(\rm Sr(OH)_2\right) &= \frac{n\left(\rm Sr(OH)_2\right)}{V}\\ &= \frac{8.71467\times 10^{-2}\; \rm mol}{0.047\; \rm L} \approx 1.854\; \rm mol \cdot L^{-1}\end{aligned}[/tex].
(Rounded to four significant figures.)
A 45.0 mL sample of 0.020 M acetic acid (HC2H3O2) is titrated with 0.020 M NaOH.? Determine the pH of the solution after adding 35.0 mL of any NaOH. (Ka of acetic acid is 1.8 x 10-5) HC2H3O2 (aq) + NaOH (aq) D NaC2H3O2(aq) + H2O (l) (Hint: Calculate new concentration and ICE table)
Answer:
Explanation:
CH₃COOH + NaOH = CH₃COONa + H₂O .
.02M
CH₃COOH = CH₃COO⁻ + H⁺
C xC xC
Ka = xC . xC / C = x² C
1.8 x 10⁻⁵ = x² . .02
x² = 9 x 10⁻⁴
x = 3 x 10⁻²
= .03
concentration of H⁺ = xC = .03 . .02
= 6 x 10⁻⁴ M , volume = 45 x 10⁻³ L
moles of H⁺ = 6 X 10⁻⁴ x 45 x 10⁻³
= 270 x 10⁻⁷ moles
= 2.7 x 10⁻⁵ moles
concentration of NaOH = .0200 M , volume = 35 x 10⁻³ L
moles of Na OH = 2 X 10⁻² x 35 x 10⁻³
= 70 x 10⁻⁵ moles
=
NaOH is a strong base so it will dissociate fully .
there will be neutralisation reaction between the two .
Net NaOH remaining = (70 - 2.7 ) x 10⁻⁵ moles
= 67.3 x 10⁻⁵ moles of NaOH
Total volume = 45 + 35 = 80 x 10⁻³
concentration of NaOH after neutralisation.= 67.3 x 10⁻⁵ / 80 x 10⁻³ moles / L
= 8.4125 x 10⁻³ moles / L
OH⁻ = 8.4125 x 10⁻³
H⁺ = 10⁻¹⁴ / 8.4125 x 10⁻³
= 1.1887 x 10⁻¹²
pH = - log ( 1.1887 x 10⁻¹² )
= 12 - log 1.1887
= 12 - .075
= 11.925 .
1. In this experiment, the procedure instructs you to dissolve solid potassium hydrogen tartrate (KHT) in two different solvents. What are these two solvents? (2 pts)
Answer:
Water
Explanation:
Solid potassium hydrogen tartrates (KHT) is soluble in water. This is especially at room temperature.
The solvent for KHT is water.
A student accidentally let some of the vapor escape the beaker. As a result of this error, will the mass of naphthalene you record be too high, too low, or unaffected? Why?
Answer:
too low
Explanation:
If our aim is to recover the naphthalene and measure its mass after separation, then we must not allow any vapour to escape.
Naphthalene is a sublime substance, it can be separated by sublimation. It changes directly from solid to gas. This vapour must be kept securely so that none of it escapes. If part of the naphthalene vapour happens to escape accidentally, then the measured mass of naphthalene will be too low compared to the mass of naphthalene originally present in the mixture.
Calculate the maximum volume in mL of 0.18 M HCl that a tablet containing 340 mg Al(OH)3 and 516 mg Mg(OH)2 would be expected to neutralize. Assume complete neutralization.
Answer:
171 mL of HCl
Explanation:
The first thing we want to do is consider the reaction between Al(OH)3 and water - as that is the expected reaction that is taking place,
Al(OH)3 + 3HCl → AlCl3 + 3H2O
Knowing this, let's identify the mass of Al(OH)3. Aluminum = 27 g / mol, Oxygen( 3 ) = 16 [tex]*[/tex] 3 = 48, Hydrogen ( 3 ) = 1 [tex]*[/tex] 3 = 3 - 27 + 48 + 3 = 78 g / mol. This value is approximated however ( 78 g / mol ), as the molar mass of each substance is rounded as well. Another key thing we need to do here is to convert 340 mg → grams, considering that that unit is a necessity with respect to moles, as you might know - 340 mg = 0.340 g.
Now we can calculate how much moles of HCl will be present in solution, provided we have sufficient information for that,
(0.340 g Al(OH)3) / (78.0036 g / mol Al(OH)3) [tex]*[/tex] (3 mol HCl / 1 mol Al(OH)3)
⇒ (.004358773185 g^2 / mol Al(OH)3) [tex]*[/tex] (3 HCl / Al(OH)3 )
⇒ .01307632 mol HCl
We can apply this same concept on the reaction of Mg(OH)2 and water, receiving the number of moles of HCl when that takes place. Then we can add the two ( moles of HCl ) and divide by the value " 0.18 mol / L " given to us.
" Mg(OH)2 + 2HCl → MgCl2 + 2H2O "
Molar mass of Mg(OH)2 = 58.3197 g / mol,
516 mg = 0.516 g
(0.516 g Mg(OH)2) / (58.3197 g / mol Mg(OH)2) [tex]*[/tex] (2 mol HCl / 1 mol Mg(OH)2)
= .017695564 mol HCL
___________
( .01307632 + .017695564 ) / ( 0.18 M HCl )
= 0.170954911 L
= 171 mL of HCl
A crystal lattice formed by positive and negative ions is called a
Answer:
Ionic Crystal
Explanation:
Using the periodic table provided, identify the atomic mass of sodium (Na) . Your answer should have 5 significant figures. Provide your answer below: __ amu
Answer:
Your answer will either be 22.9897 or 22.990 !!
Explanation:
When alkanes react with chlorine in the presence of ultraviolet light, chlorine atoms substitute for one or more alkane hydrogen atoms. What is the number of different chloroalkane compounds that can be formed by the reaction of C2H6 with chlorine?
Answer:
6
Explanation:
Alkanes undergo substitution reaction so the number of replacement reaction hydrogen is 6
A reaction mixture at 175 K initially contains 522 torr of NO and 421 torr of O2. At equilibrium, the total pressure in the reaction mixture is 748 torr. Calculate Kp at this temperature. Express your answer to three significant figures.
Answer:
[tex]Kp=0.0386[/tex]
Explanation:
Hello,
In this case, the undergoing chemical reaction is:
[tex]2NO+O_2\rightleftharpoons 2NO_2[/tex]
For which the equilibrium expression is:
[tex]Kp=\frac{p_{NO_2}^2}{p_{NO}^2p_{O_2}}[/tex]
Whereas, at equilibrium, each pressure is computed in terms of the initial pressure and the reaction extent via:
[tex]p_{NO_2}=2x\\p_{NO}=522-2x\\p_{O_2}=421-x[/tex]
And the total pressure:
[tex]p_{eq}=p_{NO_2}+p_{NO}+p_{O_2}\\\\p_{eq}=2x+522-2x+421-x\\\\p_{eq}=943-x[/tex]
Yet it is 748 torr, for which the extent is:
[tex]x=943-p_{eq}=943-748\\\\x=195torr[/tex]
Therefore, Kp turns out:
[tex]Kp=\frac{(2x)^2}{(522-2x)^2(421-x)}\\\\Kp=\frac{(2*195)^2}{(522-2*195)^2(421-195)}\\\\Kp=0.0386[/tex]
Best regards.
Compare strontium with rubidium in terms of the following properties:
a. Atomic radius, number of valence electrons, ionization energy.
b. Strontium is smaller than rubidium.
c. Rubidium is smaller than strontium.
d. Strontium has more valence electrons.
e. Rubidium has more valence electrons.
f. Strontium has a larger ionization energy.
g. Rubidium has a larger ionization energy.
Answer:
Strontium is smaller
Strontium has the higher ionization energy
Strontium has more valence electrons
Explanation:
It must be understood that both elements belong to the same period i.e the same horizontal band of the periodic table
While Rubidium is an alkali metal(group 1) while Strontium is an alkali earth metal(group 2)
Since they are in the same period, periodic trends would be useful in evaluating their properties
In terms of atomic radius, rubidium is larger meaning it has a bigger atomic size
Generally, across the periodic table, atomic radius is expected to decrease and thus Rubidium which is leftmost is expected to have the higher atomic radius
Since strontium belongs to group 2 of the periodic table, it has 2 valence electrons which is more than the single valence electron that rubidium which is in group 1 has
In terms of ionization energy, the atom with the higher number of valence electrons will have the higher ionization energy which is strontium in this case
The amount of space an object takes up is called _____. gravity weight mass volume