Answer:
Solar elevation.
Ozone.
Cloud cover.
Ground surface reflectivity.
Altitude.
Aerosols and pollutants.
Direct and diffuse UV.
I'm not sure if this was what you were looking for, but if it helps please mark me as brainliest.
Which one has a greatest mass, one atom of carbon, one atom of hydrogen, or one atom of litium
What qualifications do you need to be a research scientist?
A. High IQ
B. College degree
C. High school diploma
D. Ph.D
Answer:
Ph.D
Explanation:
For the most part, research scientists need a bachelor's degree in a highly associated field. A master's degree or a doctorate is frequently expected.
Which process is based on repulsion of oil and water?
Answer:
We can seprate oil and water by the process of seprating funnel
How many grams of water are produced when 2.50 mol oxygen reacts with hydrogen?
H2 + O2 + H2O
Select one:
a. 45.0 g
b. 22.5 g
c. 90.0 g
O d. 3.6 g
PLEASE HELP
Answer:
it is 90.0
Explanation:
the sun is 73% hydrogen and 25% helium the rest is other elements what is the percentage of other elements in the sun
Answer:
12%
Explanation:
Which lifestyle is most likely to lead to infertility in a male ?
A man who works as a mechanic
A man who works as a computer programmer and sits at desk magority of the day
A semi professional athlete
A man who works for a company’s that applies pesticides to lawns
Answer:
The second on, A man who works as a computer programmer and sits at desk magority of the day.
Explanation:
Answer:
Explanation:
The only answer I can think as being possible is the last one. Pesticides are chemicals that go after unwanted animal life. They do not know that they should not attack human beings.
Infertility could very well be one of the side effects of a pesticide. There are others as well. Some pesticides go after the central nervous system (think mice and rats) and those are dangerous to use and to leave around.
The others all involve occupations that either require authentic abilities or mental astuteness. Neither should affect a man's ability to reproduce.
Consider preparing ammonia gas by the following reaction:
N2(g) + 3H2(g)
===>
2NH3(g)
If you have 28.02 g of N2 and excess H2, how many grams of NH3(g) can be produced.
6.06 g
14.01 g
34.08 g
68.16 g
28.02 g
Answer:
34.08 g
Explanation:
Take the atomic mass of N=14.0, H=1.0/
no. of moles=mmass/molar mass
no. of moles of N2 used = 28.02 / (14x2)
=1.0007mol
From the equation, the mole ratio of N2 : NH3 = 1: 2,
so one mole of N2 produces 2 moles of NH3.
Using this ratio, we can deduce that the no. of moles of NH3 = 1.0007x2
= 2.001428mol
mass = no. of moles x molar mass
Hence,
mass of NH3 produced = 2.001428 x (14+1x3)
= 34.03
≈C
2. If the reaction of 5.75 moles of sodium with excess hydrofluoric acid is able to produce 2.49 mol H2, what is the percent yield of hydrogen gas?
Unbalanced equation:
Na + HF –> NaF + H2
94.2%
86.5%
43.3%
23.1%
Answer:
86.5%
Explanation:
We'll begin by writing the balanced equation for the reaction. This is given below:
2Na + 2HF –> 2NaF + H2
Next, we shall determine the theoretical yield of the hydrogen gas, H2. This is illustrated:
From the balanced equation above,
2 moles of Na reacted to produce 1 mole of H2.
Therefore, 5.75 moles of Na will react to produce = (5.75 x 1)/2 = 2.88 moles of H2.
Therefore, the theoretical yield of Hydrogen gas, H2 is 2.88 moles.
Finally, we shall determine the percentage yield of Hydrogen gas, H2. This can be obtained as follow:
Actual yield of H2 = 2.49 moes
Theoretical yield of H2 = 2.88 moles
Percentage yield of H2 =.?
Percentage yield = Actual yield /Theoretical yield x 100
Percentage yield = 2.49/2.88 x 100
Percentage yield = 86.5%
Therefore, the percentage yield of Hydrogen gas, H2 is 86.5%.
Scientists hypothesize that a certain species of animal existed in the past.
But, fossils of the species have never been found. Which two statements
could explain why?
A. There were very few members of the species.
B. Their bodies decomposed quickly.
O C. Their bodies contained radioactive atoms.
D. Minerals seeped into their bones.
SUBMIT
Answer: Fossils of the species have never been found because:-
a. There were few members of the species.
d. Their bodies decompose quickly.
For an organism to become fossil it is important that it do not decompose before it get buried by sediments.
What are fossils?
A fossil is any preserved remains, impression, or trace of any once-living thing from a past geological age.
To know more about fossil formation here
brainly.com/question/1196730
Answer: The answer is B and A.
Explanation:
I took the test!
In the reaction Ca + Cl2 → CaCl2, what is the mole ratio of chlorine to calcium chloride?
Select one:
O a. 2:3
O b. 2:1
O c. 1:2
O d. 1:1
PLEASE HELP ME
Answer:
D. 1:1
Explanation:
For every 1 mole of chlorine (Cl₂), there is one mole of calcium chloride (CaCl₂).
So, the mole ratio of chlorine to calcium chloride is 1:1.
Hope this helps. :)
The mole ratio of chlorine to calcium chloride in the given chemical reaction is 1:1.
What is the stoichiometry?Stoichiometry of the reaction gives idea about the relative amount of moles of reactants and products present in the given chemical reaction.
Given chemical reaction is:
Ca + Cl₂ → CaCl₂
From the stoichiometry of the given reaction it is clear that,
1 mole of chlorine = reacts with 1 mole of calcium chloride
So, mole ratio = Chlorine / calcium chloride = 1:1
Hence required mole ratio is 1:1.
To know more about mole ratio, visit the below link:
https://brainly.com/question/504601
#SPJ2
If the pH of a solution is 7.6, what is the pOH? A. 6.4 B. 8.4 C. 5.4 D. 7.4
Answer:
6.4
Explanation: pH
+
pOH
=
14
So if
pH
=
7.6
then
pOH
=
14
−
pH
=
6.4
Explanation:
Wrote this out spaced so it's more clear.
Nitrogen dioxide and water react to produce nitric acid, HNO3,
and nitrogen oxide.
3NO2(g) + H2O(l) — -→ 2HNO3(aq) + NO(g)
a. How many grams of H20 are required to react with 28.0 g
of NO2?
b. How many grams of NO are produced from 15.8 g of H2O?
c. How many grams of HNO3 are produced from 8.25 g of NOZ?
Answer:
Explanation:
a )
3NO₂(g) + H₂O(l) — -→ 2HNO₃(aq) + NO(g)
3 x 46 g 18 g 2 x 63 g 30 g
138 g of NO₂ requires 18 g of H₂O
28 g of NO₂ requires ( 18 / 138) x 28
= 3.65 g of H₂O.
b )
18 g of H₂O produces 30 g of NO gas
15.8 g of H₂O produces ( 30/18 ) x 15.8
= 26.33 g of NO gas .
c )
138 g of NO₂ produces 126 g of HNO₃
8.25 g of NO₂ produces (126 / 138 ) x 8.25
= 7.53 g of HNO₃
A group in the periodic table has the same
A. number of protons.
B. number of neutrons.
C. number of outer shell electrons.
D. shell number.
Hey there! :)
Answer:
C. Number of outer shell electrons.
Explanation:
Groups consist of the vertical columns of the periodic table, such as 1A, 2A, etc. (Not including transition metal groups) which depict the number of valence electrons, or the number of electrons in the atom's outer shell.
For example, Oxygen, which is in group 6A, contains 6 valence (outer shell) electrons.
Answer:
number of outer shell electrons.
Explanation:
The functional group for an ester is: RCHO RCOOH RCOOR ROH
Answer:
RCOOR
Explanation:
Odyssey ware
RCOOR is the functional group for an ester. An ester is an organic molecule created when an acid and an alcohol interact. The general structure of the compound is RCOOR, where R is an aryl or alkyl group.
What is the way for the structure ?This functional group is made up of an alkyl or aryl group (R) and a carbonyl group (C=O) linked to an oxygen atom. Two additional carbon atoms, one of which is a member of the carbonyl group and the other of which is a member of the alkyl or aryl group, are joined to the oxygen atom.
The connection between the oxygen atom and the hydrogen atom of the acid is broken during the interaction of an acid with an alcohol to create an ester.of a fresh connection between the oxygen atom and the alcohol's alkyl or aryl group. As a result, the RCOOR functional group is created.
Esters are significant organic substances with many different uses. They serve as solvents and are employed in the synthesis of flavours, perfumes, polymers, medicines, and other products. They are also employed in the creation of fragrances and cosmetics, as well as as lubricants. Other organic compounds can be made using esters as intermediates.
Learn more about organic compounds at:
https://brainly.com/question/13508986
#SPJ3
How did the change of stress (adding or removing reactants or products) cause a shift in the equilibrium system of your solutions? Use data to support your answer. Make sure you discuss all four stress changes: Adding a reactant Adding a product Removing a reactant Removing a product
Answer:
When reactant is added, the equilibrium moves in order to reduce this stress which then makes more product. When a product is added, the equilibrium moves in order for reactants to reduce the stress.
Explanation:
:)
It should be noted that when a reactant is added, the equilibrium moves in order to reduce this stress which then makes more product.
It should be noted that a reactant simply means a substance that takes part in a chemical reaction to form products.
When a reactant is added, the equilibrium moves in order to reduce this stress which then makes more product. Also, when a product is added, the equilibrium moves in order for reactants to reduce the stress. This is vital for the reaction.
Learn more about reactants on:
https://brainly.com/question/6421464
which three events occur when earths convection currents move toward each other
Answer:
Option A, Tectonic plates above the currents move toward each other.
Option C, One plate will submerge beneath another plate.
Option D, A convergent boundary is formed at the site of the collision.
Explanation:
The convection currents are the ones responsible for the movement of the tectonic plates, thus shaping the Earth's appearance with their movement, as well with the structures created by the movement. If the convection currents move toward each other, than the tectonic plates are moving toward each other. That will cause collision between the continents, and convergent boundaries will be formed. If the collision is between two or more continental plates, than they will merge, and from the pressure mountain ranges will start to form, but if there an oceanic plate involved as well, than the oceanic plate will be subducting beneath the continental plate or plates.
Answer:
- Tectonic plates above the currents move toward each other;
- One plate will submerge beneath another plate;
- A convergent boundary is formed at the site of the collision;
The convection currents are the ones responsible for the movement of the tectonic plates, thus shaping the Earth's appearance with their movement, as well with the structures created by the movement. If the convection currents move toward each other, than the tectonic plates are moving toward each other. That will cause collision between the continents, and convergent boundaries will be formed. If the collision is between two or more continental plates, than they will merge, and from the pressure mountain ranges will start to form, but if there an oceanic plate involved as well, than the oceanic plate will be subducting beneath the continental plate or plates.
As Danny was pouring cereal for his breakfast, he noticed that the cereal box says that the cereal contains 5 milligrams of iron per serving. Danny decided to perform an experiment to test this claim. He found that the cereal contains 4.6 milligrams of iron per serving. Based on Danny's measurement, the value reported on the label is ( CORRECT OR INCCORECT) because A: (IT IS DIFFERENT FROM THE VALUE DANNY MEASURED) B: (IT IS REORTED TO THE NEAREST MILLIGRAM) C: (IT USES THE SAME UNITS THAT DANNY USED).
Answer:
Correct, because B it is reported to the nearest miligram
Explanation:
4.6 rounded up is 5
Q10. Calcium fluoride can be made from the reaction of calcium metal with fluorine gas. The image shows this reaction. Explain how the product is formed in terms of electron movement and what the final electron configurations are
Answer:
The answer to your question is given below
Explanation:
In this reaction, the calcium metal, Ca loses two electrons to form calcium ion, Ca^2+ and two fluorine atoms, F receives the two electrons to form two fluoride ion, F^-.
This is illustrated by the following equation:
Ca —> Ca^2+ + 2e
2F + 2e –> 2F^-
Ca + 2F + 2e —> Ca^2+ + 2F^- + 2e
Cancel out 2e
Ca + 2F —> Ca^2+ 2F^-
Thus, the electronic configuration can be written as follow:
Before combination:
Calcium, Ca (20) => 2, 8, 8, 2
Two fluorine atom, F (9) => 2, 7 and 2, 7
After combination:
Calcium ion, Ca^2+ => 2, 8, 8
Two fluoride ion, F^- => 2,8 and 2,8
The correct name for molecule I is
Molecule I
I
|
CH3-CH-CH3
a. Iodopropane
b. 2-iodylpropane
c. 2-iodopropane
D. Propyliodine
14. The correct name for molecule III is
Molecule III
F
|
C= CH
——-
a. 2-Fluoroeth 1-yne
b. Fluoroethyne
C. Fluoroethene
D. Methylfluorine
16. Synthetic chlorinated hydrocarbons such as dioxins and furans are usually greater pollution hazard then natural organic substances because synthetic hydrocarbons are
a. More volatile
b. Less water soluble
C. Less Biodegradable
D. More chemically reactive
Question 17.
Sources of pollutants
1. High temperature combustion
2. Pulp and paper industry
3. Pesticides
4. Sour gas plants
Match each source of pollutant as numbered above with its pollutant as listed below. Use each number only once
17. Dioxins/furans
18. SO2(g)
19. Nox(g)
20. Phosphates
Answer:
c). 2-iodopropane
14) C). Fluoroethene
16) D). More chemically reactive
17) 1). High temperature combustion - Dioxins/furans
2). Pulp and paper industry - SO2(g)
3). Pesticides - Phosphates
4). Sour gas plants - Nox(g)
Explanation:
The correct name for molecule I would be '2-iodopropane' where the number 2 reflects the position of iodine. There are three carbons and 8 hydrogen atoms which reflect that it is an alkane compound. In the given carbon chain. In this chain of three carbons, iodine is present on the second carbon. Therefore, option C is the correct answer.
14). The appropriate name for molecule III exemplifies Fluoroethene as it consists of two carbons due to which it belongs to the 'ethane' group and it bears the prefix 'fluoro as it belongs to fluorine group and the suffix '-ene' due to double bond.
16). Synthetic hydrocarbons are 'more chemically reactive' and therefore, it generates greenhouse gases and leads to climate change, global warming, depletion of the ozone layer, etc.
17). 1). Dioxins are generated as a result of high-temperature combustion processes like commercial waste incineration or burning of fuels.
2). Pulp and paper industry releases various gases like nitrogen oxide, sulfur dioxide SO2(g), carbon dioxide, etc.
3). Phosphate is the pollutant released from pesticides that badly affects the fertility of the soil.
4). Nox(g) nitrogen oxide released by sour gas plants and coal-fired emissions is a major contributor to increased greenhouses gases and global warming.
In this molecule, what's the formal charge on the central O atom?
A. -1
B. -2
C. 0
D. +1
In water, oxygen is covalently bonded to two hydrogen atoms. Oxygen has the formal charge of zero and hydrogens also has the formal charge of zero.
What is formal charge ?Formal charge of an atom is the charge it possess in a compound. The formal charge of an atom is found out from its valence electrons, lone pair of electrons and bond pairs.
The equation of formal charge is written as follows:
Formal charge = Valence electrons - (Lone pair + bond pair)
In water, oxygen covalently bonds to two hydrogen atoms. The bond pair of electrons from oxygen is 2.
number of valence electrons in oxygen = 6
no.of lone pairs = 4
Then FC = 6 - (4 + 2) = 0
Therefore, the formal charge of oxygen in water is zero.
Find more on formal charge:
https://brainly.com/question/11723212
#SPJ2
How many grams of N2 can be produced when 6.50 g of O2
reacts?
Answer:
3.79 g of N2.
Explanation:
We'll begin by writing the balanced equation for the reaction.
This is given below:
4NH3 + 3O2 → 2N2 + 6H2O
Next, we shall determine the mass of O2 that reacted and the mass of N2 produced from the balanced equation.
This is illustrated below:
Molar mass of O2 = 16x2 = 32 g/mol
Mass of O2 from the balanced equation = 3 x 32 = 96 g
Molar mass of N2 = 2x14 = 28 g/mol
Mass of N2 from the balanced equation = 2 x 28 = 56 g
Summary:
From the balanced equation above,
96 g of O2 reacted to produce 56 g of N2.
Finally, we shall determine the mass of N2 produced by reacting 6.50 g of O2.
This can be obtained as follow:
From the balanced equation above,
96 g of O2 reacted to produce 56 g of N2.
Therefore, 6.50 g of O2 will react to produce = (6.50 x 56)/96 = 3.79 g of N2.
Therefore, 3.79 g of N2 were obtained from the reaction..
(Blank) tells you that the exact momentum and position of a particle can't be known at the same time.
A. The Schrodinger equation
B. Quantum mechanics
C. The uncertainty principle
D. Particle-wave duality
Answer:
The uncertainty principle
Explanation:
Essentially if you measure the momentum of the particle at a given point, then when you go to measure the position it has moved, thus you don't know the position. Vise versa if you measure the position you only capture a still frame of the particle and no information about it's momentum, which will have changed.
Answer: the uncertainly principle
Explanation:
it basically states you can not know both at the same time
1. A 10.0 g sample of propane, C3H8, was combusted in a constant-volume bomb
calorimeter. The total heat capacity of the bomb calorimeter and water was 8.0
kJ/°C. The molar heat of combustion of propane is -2 222 KJ/mol. If the starting
temperature of the water was 20 °C, what will be the final temperature of the
bomb calorimeter?
Answer:
The final temperature of the bomb calorimeter is 82.98°C
Explanation:
The given information are;
The mass of the propane sample = 10.0 g
The heat capacity of the bomb calorimeter = 8.0 kJ/°C
The molar heat of combustion of propane is -2,222 kJ/mol.
The starting (initial) temperature of the water, T₁ = 20°C
The final temperature of the bomb calorimeter = T₂
The molar mas of propane = 44.1 g/mol
The number of moles, n, of propane present in 10.0 g of propane is found as follows;
[tex]Number \ of \ moles \ of \ propane, \ n = \dfrac{Mass \ of \ propane}{Molar mass \ of \ propane} = \dfrac{10}{44.1} = 0.227 \ moles[/tex]Which gives;
The heat, Δh, released from the combustion of 10.0 g of propane = 0.227 × -2222 kJ/mol
Δh = -503.85 kJ/mol
Heat gained by the calorimeter = Heat released from the combustion of 10.0 g of propane = 503.85 kJ/mol
Change in heat, Δh[tex]_c[/tex] in the calorimeter = Heat capacity × Temperature change
Δh[tex]_c[/tex] = m × C
503.85 kJ/mol = 8.0 kJ/°C × (T₂ - 20°C)
T₂ = -503.85 kJ/mol/(8.0 kJ/°C) + 20°C = 82.98°C
The final temperature of the bomb calorimeter = 82.98°C
For each of the esters provided, identify the alcohol and the carboxylic acid that reacted.
52. Methyl propanoate+_________
53. Ethyl methanoate+__________
Answer:
52. The alcohol USED => methanol, CH3OH
The carboxylic acid USED => propanoic acid, CH3CH2COOH.
53. The alcohol USED => Ethanol, CH2CH3OH
The carboxylic acid USED => Formic acid, HCOOH.
Explanation:
52. To obtain Methyl propanoate, CH3CH2COOCH3, we simply react propanoic, CH3CH2COOH and methanol, CH3OH together as shown below:
CH3CH2COOH + CH3OH —> CH3CH2COOCH3 + H2O
The alcohol used: methanol, CH3OH
The carboxylic acid used: propanoic acid, CH3CH2COOH.
53. To obtain Ethyl methanoate, HCOOCH2CH3, we simply react
Formic acid, HCOOH and ethanol, CH3CH2OH together as show below:
HCOOH + CH3CH2OH —> HCOOCH2CH3 + H2O
The alcohol USED => Ethanol, CH2CH3OH
The carboxylic acid USED => Formic acid, HCOOH.
4. A chemical reaction has the equation 2NaCl (aq) + F2 (g) + 2NaF (s) + Cl2 (g). What type of reaction occurs between NaCl and F2?
A. Double displacement
B. Single displacement
C. Synthesis
D. Decomposition
A chemical reaction has the equation 2NaCl(aq) + F₂ → 2NaF(s) + Cl₂ (g). The reaction type occur between NaCl and F₂ is Single displacement.
Hence, Option (B) is correct answer.
What is a Chemical reaction ?A chemical reaction is a process in which chemical bonds between atoms to break and reorganize, to form other new substances.
Now lets check all options one by one
Option (A): Double displacement
A double displacement is a chemical reaction in which elements are exchange between the two compounds. In the given reaction F₂ is not a compound. so this reaction cannot occur
Hence, option (A) is incorrect.
Option (B): Single displacement
A Single displacement reaction is a chemical reaction in which one element replaces the another element in a compound.
In the given reaction F₂ element replaces with the element Na in a compound NaCl. So this reaction occur.
Hence, option (B) is correct.
Option (C): Synthesis
A synthesis reaction is a chemical reaction where two or more substances react to produce a new compound.
In the given reaction two products are formed NaF which is a compound and Cl₂ which is element. So this reaction cannot occur.
Hence, option (C) is incorrect.
Option (D): Decomposition
A decomposition reaction is a chemical reaction in which one reactant breaks down to form a two or more products.
In the given reaction two reactants are given NaCl and F₂. So this reaction cannot occur.
Hence, option (D) is incorrect.
Thus, from above conclusion we can say that The reaction occurs between NaCl and F₂ is single displacement reaction.
Hence, Option (B) is correct answer.
Learn more about Chemical reaction here: https://brainly.com/question/11231920
#SPJ2
Sugar can be converted to carbon dioxide and water by burning in air or by metabolic reactions inside living cells. How are these reactions similar and how are they different?
Answer:
These reactions are similar because the process is similar and the products are carbon dioxide they are different because the substances are different to outgo these reactions
Explanation:
50 Points for whoever does it and shows their work. Maya has four glasses of milk. The temperature and the amount of milk in each glass are shown: Glass A: 20 grams of milk at 10 °C Glass B: 50 grams of milk at 80 °C Glass C: 20 grams of milk at 50 °C Glass D: 50 grams of milk at 80 °C Which statement is correct?
Answer:
A. 20 grams of milk at 10°C
Explanation:
Since we refrigerate milk, it would be cooler than the room temperature, which standard norm is 25°C. So the milk has to be colder than the room temperature. Therefore, our answer is A.
Answer: A is the correct answer
Explanation:
The temperature of room temperature is more than that and you need to keep it colder, hope this helped!
procedure to find out if the penny is real copper with copper wire
Answer:
Four ways to test a copper penny are given below:-
Explanation:
Firstly, take a quick look only at the color of the penny. Zinc pennies may appear patchy, irregular whereas copper-gold coins may seem more probable to be orange or even chocolate. Secondly, drop your penny on the floor and hear the noise it's making. The copper penny would have a "started to ring" sound in this situation, whereas the zinc penny should "clunk." Third, you can weigh the centimeter. You'll need an accurate scale weighing in grams. The penny of copper will weigh 3.11 grams while the penny of zinc weighs 2.5 grams. In the end, look at the date. If your penny was taken out of circulation before 1982, 95 percent copper and 5 percent zinc will be made. Beginning in 1982, pennies had just 2.5 percent copper and 97.5 percent zinc in them. Pennies from any of the two formulations made in 1982 may be produced.
How many moles of Al would be produced from 12.85 moles of Al2O3?
Al2O3 → AL + O2
Select one:
O a. 25.7
O b. 6.43
O c. 19.3
d. 8.61
PLEASE HELP ME
Bromine water was added dropwise to test tubes containing aqueous solutions of bromide, chloride, and iodide. lodide was oxidized to iodine; bromide and chloride gave no reaction Arrange Br 2 ,Cl 2 ,I 2 in order of their strength as an oxidizing agent.
Answer:
Cl₂ > Br₂ > I₂
Explanation:
An oxidizing agent gains electron for itself by removing electrons from other reactants during a reaction. Oxidation is the loss of electrons. Chlorine can take electron from bromine and chlorine while bromine can take electron from iodine, therefore chlorine is a more oxidizing agent than bromine and iodine while bromine is a more oxidizing agent than iodine.
Oxidizing ability decreases down the group.
Therefore Cl₂ > Br₂ > I₂