5. Which of the following materials
evaporates most quickly?
O MEK
O methanol
acetone
Answer: acetone
Explanation: Acetone has the weakest intermolecular forces, so it evaporated most quickly. Water had the strongest intermolecular forces and evaporated most slowly.
Why might an organism have more than one arrow coming from them in the food web
why is the volume of hydrogen is doubled the volume of oxygen in electrolysis of water?
Explanation:
As you can that water splits into molecules of hydrogen and 1 molecules of oxygen since , number of molecules of hydrogen released is double the number of molecules of oxygen released, volume occupied by hydrogen gas is double the volume occupied by oxygen gas
An unknown compound in the lab is either LiOH, CaF2, or LiF. If the sample has a mass of 260 grams and contains 3.33 moles, what is the identity of the compound?
Answer:
CaF2
Explanation:
1 mole of CaF2 = 78.0748064 grams
78 times 3.33= 259.74
the others multiplied were nowhere near 260 grams either
Choose the larger atom from each pair, if possible.
a. Sn or Si,
b. Br or Ga,
c. Sn or Bi,
d. Se or Sn
Answer:
a. Sn or Si ⇒ Sn
b. Br or Ga ⇒ Ga
c. Sn or Bi ⇒ similar in size
d. Se or Sn ⇒ Sn
Explanation:
The larger atom has a larger atomic radius. We have to consider how varies the atomic radius for chemical elements in the Periodic Table. In a group (column), the atomic radius increases from top to bottom while in a period (file), it increases from right to left.
a. Sn or Si ⇒ Sn
They are in the same group. Sn is on the top, so it has a larger atomic radius.
b. Br or Ga ⇒ Ga
They are in the same period. Ga is located at the left so it has a larger atomic radius.
c. Sn or Bi ⇒ similar
They are not in the same group neither the same period. Bi is located more at the bottom, so it would be larger than Sn, but Bi is also at the right side, so it would be smaller than Bi. Thus, they have comparable sizes.
d. Se or Sn⇒ Sn
They are not in the same group neither the same period. Se is located at the top and right side compared to Sn, so Sn is the larger atom.
Which substances are compounds? Please help
Answer:
1 and 3
Explanation:
oh this one lol,, hope it helps
Answer:
1 and 3
Explanation:
hope this helps :)
Which of the following movements of ocean water has the greatest direct effect on the growth of producers.
A. Upwelling
B. Deep Current
C. Surface Current
D. Convection Current
Answer:
A- Upwelling
Explanation:
You need 267 mL of .25M NaCl,
but the only supply of NaCl you
have
is 1.75M NaCl. How do you prepare
the required solution?
To prepare 267 mL of 0.25M NaCl, we need to take 38.29 mL of 1.75M NaCl solution and add water to it until it makes the final volume up to 267 mL.
We need to prepare the solution of 0.25 M NaCl using 1.75 M NaCl solution, we can use the dilution formula:
[tex]C_1V_1 = C_2V_2[/tex]
where [tex]C_1[/tex], [tex]V_1[/tex] is the concentration and the volume of the initial solution, [tex]C_2[/tex], [tex]V_2[/tex] is the concentration and the volume of the final solution.
We know the final concentration and the final volume that we are required to make. So we can use the above relation to find [tex]V_1[/tex] of the solution:
[tex]V_1 = (C_2 * V_2) / C_1[/tex]
Now after substituting the values in the relation, we get:
[tex]V_1 = (0.25 M x 267 mL) / 1.75 M\\V_1 = 0.03829 L or 38.29 mL[/tex]
So to prepare 267 mL of 0.25M NaCl, we need to take 38.29 mL of 1.75M NaCl solution and add water to it until it makes the final volume up to 267 mL.
Learn more about the Dilution formula at:
https://brainly.com/question/27097060
#SPJ1
How many moles are represented by 86.5 g of Ca(OH)2?
*please help fast*
Answer:
30 2 the second power
Explanation:
Calcium hydroxide, commonly known as hydrated lime or slaked lime, is a soft white powder that is used as a primary ingredient in the chemical industry.
What is Calcium Hydroxide?Its chemical formula is Ca(OH)2. When calcium oxide and water are combined, it produces.
There are two hydroxide ions (OH) in the molecule for every calcium ion (Ca2+). The substance is ionic, and both electrolytic and aqueous dissociations result in calcium and hydroxide ions.
When water is added to dry portland cement to create concrete, this reaction takes place, and the mixture warms up and releases heat. An alternative method of manufacturing entails an aqueous double displacement reaction between sodium hydroxide and calcium chloride.
Therefore, Calcium hydroxide, commonly known as hydrated lime or slaked lime, is a soft white powder that is used as a primary ingredient in the chemical industry.
To learn more about Calcium hydroxide, refer to the link:
https://brainly.com/question/31566398
#SPJ2
calculate the number of moles of magnesium presented in a banana knowing that the one banana contains 422mg=0.422g of Mg and the atomic symbol of Mg is Mg_24
An equinox occurs when the:
sun is farthest away from the equator
sun is directly over the equator
north pole is tilted away from the sun
south pole is tilted away from the sun
Answer: sun is directly over the equator
Explanation:
There are only two times of the year when the Earth's axis is tilted neither toward nor away from the sun, resulting in a "nearly" equal amount of daylight and darkness at all latitudes.
La clorurarea catalitică a toluenului, se obţine un amestec format din 2-clorotoluen, 4-clorotoluen şi benzennereacționat în raport molar de 3 : 2 : 1. Calculaţi cantitatea de 2-clorotoluen, exprimată în moli, care se obținedin 110,4 g de toluen, în în prezența catalizatorului FeCl3.
Answer:
i dont lnow you heat alcohol over an open flame
6. For a chemical reaction, the heat of reaction is equal
to the
Answer:
internal energyExplanation:
At constant pressure, the heat of reaction is equal to the enthalpy change of the system. Most chemical reactions occur at constant pressure, so enthalpy is more often used to measure heats of reaction than internal energy
For a chemical reaction, the heat of reaction, also known as enthalpy change (∆H), is equal to the difference between the total energy of the products and the total energy of the reactants.
Enthalpy change represents the amount of heat energy exchanged or released during the course of a reaction. The heat of reaction can be positive (endothermic), indicating that the reaction absorbs heat from the surroundings, or negative (exothermic), indicating that the reaction releases heat to the surroundings.
The magnitude of the heat of reaction is a measure of the amount of heat energy involved in the reaction.
Learn more about Heat of reaction, here:
https://brainly.com/question/30464598
#SPJ2
If you have a car that gets 30 miles to the gallon and fuel currently costs $2.60 a gallon, how many miles can you drive if you have 5$ worth of fuel?
Answer:
57.7 miles.
Explanation:
Hello there!
In this case, according to the given information, it is possible to set up the initial miles-cost ratio as shown below:
[tex]\frac{30mi}{\$2.60}[/tex]
Thus, we can find the the driven miles with $5 by multiplying as follows:
[tex]\frac{30mi}{\$2.60} *\$5\\\\=57.7mi[/tex]
Best regards!
The miles' the car can run with the fuel cost $5 has been 57.69 miles.
The given car run for a 30 miles by 1 gallon of the fuel. The given cost of fuel has been $2.60. Thus, for 30 miles, the cost of fuel has been driven to be $2.60.
The miles that can be driven by the car with $5 has been given by unitary method. The expression has been driven as:
[tex]\$2.60=30\;\rm miles\\\$5=\dfrac{30}{2.60}\;\times\;5\;miles\\\$5=57.69\;miles[/tex]
The miles' the car can run with the fuel cost $5 has been 57.69 miles.
For more information about unitary method, refer to the link:
https://brainly.com/question/11859405
Which sentence best describes the relationship between genes and chromosomes?
A.
Genes are found within chromosomes.
B.
Several chromosomes make up one gene.
C.
Genes and chromosomes are the only things that form the nucleus.
D. Several genes are attached to different parts of the Golgi apparatus.
Answer:
A
Explanation:
please begging you guys someone help me
Answer:
See Explanation
Explanation:
10) From the options provided for this question, gamma particle is the most energetic. Recall that gamma rays are high energy electromagnetic radiation which are capable of causing a high degree of ionization in matter.
11) The bombardment of U-235 with neutrons leads to the reaction;
[tex]U\frac{235}{92} + n\frac{1}{0}---> I\frac{138}{53} + Y\frac{95}{39} +3n \frac{1}{0}[/tex]
Hence
a = 92, b= 95, c= 53
12) In positron emission, a proton is transformed into a neutron. The mass number of the daughter nucleus is the same as its parent but the atomic number decreases by 1.
Hence;
[tex]Th\frac{231}{90} -----> e\frac{1}{0} +Ac \frac{231}{89}[/tex]
Which reaction type is really part of another type of reaction but treated separately? Explain
Answer:
Oxidation - reduction reaction which is called redox reaction.
Explanation:
The type of reaction that is a part of another type but treated separately is called Oxidation - reduction reaction.
Thus is because they usually involve 2 separate half reactions which are oxidation reactions that involve loss of electrons and then reduction equations which involve gain of electrons.
They are treated separately for example when sodium reacts with chlorine to form sodium chloride.
2Na + Cl2 = 2NaCl
Now, sodium undergoes oxidation by loosing elctrons and it's half reaction is;
2Na → 2Na^(+) + 2e^(-)
Meanwhile chlorine undergoes reduction by gaining electrons and its half reaction is;
Cl2 + 2e^(-) → 2Cl^(-)
Which statement describes ionic bonds?
A) a lattice of ions in a sea of electrons.
B) electrostatic attraction between oppositely charged ions.
C) the sharing of electrons between atoms to gain a noble gas configuration.
D) the transfer of electrons from atoms of a non-metal to the atoms of a metal.
Does wasting water also waste energy? Explain your reasoning.
Answer:
Yes.
Explanation:
Wasting household water does not ultimately remove that water from the global water cycle, but it does remove it from the portion of the water cycle that is readily accessible and usable by humans. Also, "wasting" water wastes the energy and resources that were used to process and deliver the water.
Answer:
I feel like there should be more parts to this question but I think it depends on how you got your water. If you waste water after you got it from a local stream yourself, you wasted your body energy but no real electricity of any kind. If the water is processed and filtered and you end up wasting it, I guess it counts as energy being wasted too? Because the sole purpose was to bring you clean water but you didn't utilize it
100 pts Horticulture (HURRY)
Which of the following corn pests causes galls to develop on the plant?
blight
rust
smut
mildew
Answer:
Option C, Smut
Explanation:
Corn smut is a condition in which mushroom-like tumors or galls appear on different part of the plant. This is caused by fungus Ustilago zeae. Corn smut is edible and appears grayish white with spony texture in the early stages of the infection promptly found on corn ear or tassel.
Hence, option C is correct
option c is the right answer❤️
2 Na + Cl2 --> 2 NaCl
What is the mole ratio of sodium to sodium chloride?
Answer: The mole ratio of sodium to sodium chloride 2:2.
Explanation:
As the given reaction equation is as follows.
[tex]2Na + Cl_{2} \rightarrow 2NaCl[/tex]
Here, 2 moles of sodium reacts with 1 mole of [tex]Cl_{2}[/tex] and leads to the formation of 2 moles of NaCl.
This means that 2 moles of sodium gives 2 moles of NaCl on reaction with chlorine.
Hence, the ratio of moles of sodium to sodium chloride is 2:2.
Thus, we can conclude that the mole ratio of sodium to sodium chloride 2:2.
Drought is a weather condition. true or false
Answer:
true
Explanation:
drought is a period of unusually persistent dry weather that persists long enough to cause serious problems such as crop damage and/or water supply shortages. The severity of the drought depends upon the degree of moisture deficiency, the duration, and the size of the affected area.
A student makes a sound by blowing into the mouth of an empty soda bottle. How could the student make the sound louder?
Answer:
Increase the amplitude by blowing with more force.
Explanation: I answered this.
Answer:
Increase the amplitude by blowing with more force
Explanation:
I took the test
2.a. 3.26 g of iron powder are added to 80.0 cm3 of 0.200 mol dm-3 copper(II)
sulfate solution. The following reaction occurs: Fe (s) + CuSO4 (aq) → FeSO4 (aq)
+ Cu (s)Determine the limiting reactant showing your working. *
Your answer
Answer:
The limiting reactant is CuSO₄.
Explanation:
The reaction is:
Fe(s) + CuSO₄(aq) → FeSO₄(aq) + Cu(s) (1)
To find the limiting reactant we need to find the number of moles of the reactants.
[tex] \eta_{Fe} = \frac{m}{A_{r}} [/tex]
Where:
m: is the mass of iron = 3.26 g
[tex]A_{r}[/tex]: is the standard atomic weight of iron = 55.845 g/mol
[tex]\eta_{Fe} = \frac{3.26 g}{55.845 g/mol} = 0.058 moles [/tex]
[tex] \eta_{CuSO_{4}} = M*V [/tex]
Where:
M: is the concentration of the CuSO₄ = 0.200 mol/dm⁻³
V: is the volume of the solution = 80.0 cm³
First, we need to convert the units of the volume to dm³ knowing that 1 dm = 10 cm and 1 L= 1 dm³.
[tex] V = 80.0 cm^{3}*\frac{1 dm^{3}}{(10 cm)^{3}} = 0.080 dm^{3} [/tex]
Now, the number of CuSO₄ moles is:
[tex] \eta_{CuSO_{4}} = M*V = 0.200 mol/dm^{3}*0.080 dm^{3} = 0.016 moles [/tex]
So, to determine the limiting reactant we need to use the molar ratio from equation (1), Fe:CuSO₄ = 1:1
[tex]\eta_{Fe} = \frac{1 mol Fe}{1 mol CuSO_{4}}*0.016 moles \: CuSO_{4} = 0.016 moles[/tex]
Since we need 0.016 moles of Fe to react with 0.016 moles of CuSO₄ and initially we have 0.058 moles of Fe, then the limiting reactant is CuSO₄.
Therefore, the limiting reactant is CuSO₄.
I hope it helps you!
The limiting reactant would be CuSO4
Looking at the equation of the reaction:
Fe (s) + CuSO4 (aq) → FeSO4 (aq) + Cu (s)
The mole ratio of Fe to CuSO4 is 1:1. Thus, every 1 mole of Fe will require 1 mole of CuSO4 for reaction.
Recall that: mole = mass/molar mass
Also: mole = molarity x volume
mole of Fe = 3.26/55.8
= 0.058 moles
mole of CuSO4 = 0.200 x 80/1000
= 0.016
The mole of Fe in the reaction is more than the mole of CuSO4. Thus, CuSO4 is the limiting reactant of the reaction. Fe is in excess.
More on limiting reactants can be found here: https://brainly.com/question/14225536?referrer=searchResults
Gas density can be calculated by dividing the mass of gas by its volume. If you took a balloon of gas and then warmed the balloon in a sunny window, what can now be said about the density of the gas in the balloon? Gas density can be calculated by dividing the mass of gas by its volume. If you took a balloon of gas and then warmed the balloon in a sunny window, what can now be said about the density of the gas in the balloon? The gas density will decrease. The gas density will remain the same. The gas density will increase. The density of gases is independent of temperature. none of the above
Answer: The density will decrease
Explanation: Heating a substance causes molecules to speed up and spread slightly further apart, occupying a larger volume that results in a decrease in density.
What was the lowest extent of sea ice in the data, and when did it occur?
Answer:5 1/2. occurred the other day i think
Explanation:
Plz help I need help plz ASAP
6:c
7: might be ice but im not really sure, hope you do well.
Explanation:
Calcium hydroxide, Ca(OH)2, is an ionic compound with a solubility product constant, Ksp, of 6.5×10–6. Calculate the solubility of this compound in pure water.
Answer: The solubility of this compound in pure water is 0.012 M
Explanation:
Solubility product is defined as the equilibrium constant in which a solid ionic compound is dissolved to produce its ions in solution. It is represented as [tex]K_{sp}[/tex]
The equation for the ionization of the is given as:
[tex]Ca(OH)_2\rightarrow Ca^{2+}+2OH^-[/tex]
By stoichiometry of the reaction:
1 mole of [tex]Ca(OH)_2[/tex] gives 1 mole of [tex]Ca^{2+}[/tex] and 2 mole of [tex]OH^-[/tex]
When the solubility of [tex]Ca(OH)_2[/tex] is S moles/liter, then the solubility of [tex]Ca^{2+}[/tex] will be S moles\liter and solubility of [tex]OH^-[/tex] will be 2S moles/liter.
[tex]K_{sp}=[Ca^{2+}][OH^{-}]^2[/tex]
[tex]6.5\times 10^{-6}=[S][2S]^2[/tex]
[tex]S=0.012M[/tex]
Thus solubility of this compound in pure water is 0.012 M
The temperature of 335 g of water changed from 24.5oC to 26.4oC. How much heat did this sample absorb? C for water = 4.18 J/goC
Answer: The sample absorbed 3061.565J
Explanation:
Given that
Mass of water = 335g
Initial temperature = 24.5°C
Final temperature = 26.4°C
Heat absorbed by the sample is given as = mass x specific heat of water x temperature change
Heat absorbed,q=mCΔt
The specific heat of water,C = 4.81J/g°C
Therefore, Heat absorbed,q = 335 x 4.81h x (26.4 - 24.5) = 3061.565J
Answer:
2660.57 J
Explanation:
26.4 - 24.5 = 1.9
335 x 4.18 x 1.9 = 2660.57 J
That is the correct answer.
Which term describes this diagram?
A) Element
B) Compound
C) Mixture
Answer:
b
Explanation: