Answer:
B
Explanation:
They lose energy and slow down and move closer to other gas molecules and the molecules collect together to form a liquid
Answer:
B. They lose energy.
Explanation:
took the test, can confirm it's b ヾ(•ω•`)o
5.
Which sentence best describes the relationship between genes and chromosomes?
A.
Genes are found within chromosomes.
B.
Several chromosomes make up one gene.
C.
Genes and chromosomes are the only things that form the nucleus.
D.
Several genes are attached to different parts of the Golgi apparatus.
Answer:
a
Explanation:
i need helpppp
blank 1:
blank 2:
blank 3:
blank 4:
Answer:
Fe₂(SO₄)₃ + 6KOH —> 3K₂SO₄ + 2Fe(OH)₃
The coefficients are: 1, 6, 3, 2
Explanation:
__Fe₂(SO₄)₃ + __KOH —> __K₂SO₄ + __Fe(OH)₃
To determine the correct coefficients, we shall balance the equation. This can be obtained as follow:
Fe₂(SO₄)₃ + KOH —> K₂SO₄ + Fe(OH)₃
There are 2 atoms of Fe on the left side and 1 atom on the right side. It can be balance by writing 2 before Fe(OH)₃ as shown below:
Fe₂(SO₄)₃ + KOH —> K₂SO₄ + 2Fe(OH)₃
There are 6 atoms of OH on the right side and 1 atom on the left side. It can be balance by writing 6 before KOH as shown below:
Fe₂(SO₄)₃ + 6KOH —> K₂SO₄ + 2Fe(OH)₃
There are 6 atoms of K on the left side and 2 atoms on the right side. It can be balance by writing 3 before K₂SO₄ as shown below:
Fe₂(SO₄)₃ + 6KOH —> 3K₂SO₄ + 2Fe(OH)₃
Now, the equation is balanced.
Therefore, the coefficients are: 1, 6, 3, 2
4.6 moles of a gas are at a temperature of 325 K and a volume of 96.8 L, what is the pressure of the gas
Answer:
1.27atm is the pressure of the gas
Explanation:
Using combined gas law, we can find the pressure of a gas with the moles, temperature and volume of the gas. The formula is:
PV = nRT
P = nRT / V
Where P is pressure in atm
n are the moles of the gas: 4.6 moles
R is gas constant: 0.082tamL/molK
T is absolute temperature: 325K
V is volume: 96.8L
Replacing:
P = 4.6mol*0.082atmL/molK*325K / 96.8L
P = 1.27atm is the pressure of the gas
What amount of heat is released when the temperature of 450.0 g of a
substance drops by 7.1 °C? Assume that the specific heat = 1.264 J/g.°C
Answer:
[tex]\boxed {\boxed {\sf 4038.48 \ Joules}}[/tex]
Explanation:
Since we are given the mass, specific heat, and change in temperature, we should use this formula for heat:
[tex]q=mc\Delta T[/tex]
The substance's mass is 450.0 grams, the specific heat is 1.264 J/g°C, and the change in temperature is 7.1 °C.
[tex]m= 450.0 \ g \\c= 1.264 \ J/g \textdegree C\\\Delta T= 7.1 \ \textdegree C[/tex]
Substitute the values into the formula.
[tex]q= (450.0 \ g)(1.264 \ J/g \textdegree C)(7.1 \ \textdegree C)[/tex]
Multiply the first 2 values together. The grams will cancel out.
[tex]q= 568.8 \ J/ \textdegree C (7.1 \ \textdegree C)[/tex]
Multiply again. This time, the degrees Celsius cancel out.
[tex]q= 4038.48 \ J[/tex]
4038.48 Joules of heat energy are released.
When a substance was dissolved in water, the temperature of the water increased. This process is described as
A.
endothermic with the release of energy
B.
endothermic with the absorption of energy
C.
exothermic with the release of energy
D
exothermic with the absorption of energy
Answer: a,
endothermic with the release of energy
1. Molarity of 2.6 moles of NaCl in 2.4 L solution of HOH
2. What is the molarity of a 514 mL solution with 0.46 mol of HSO4
3. What is the molarity of a 1000 mL solution with 12.5 mol of NaOH
4. What is the molarity of a solution of 32.5 grams of KCl in 3.5 L of HOH.
5. What is the molarity of a solution with 84.2 g of CuSO4 in 21,612.2 mL of HOH
6. Molarity of 2.2 g of HCl in 61.2 mL of HOH
7. What is the molarity of 241.8 g Fe2O3 in 500 mL of HOH.
All answers need to be rounded to the nearest 0.01
Answer:
Explanation:
Start earning $78/hourly for working online from your home for few hours each day... Get regular payment on a weekly basis... All you need is a computer, internet connection and a little free time... Read more here... www.Nifty2.com
Which of the following best describes the location of an element in the same period as the element tin?
A. Group 14(4A), Period 4
B. Group 16(6A), Period 5
C. Group 14(4A), Period 5
D. Group 13(3A), Period 6
Answer:
b
sorry if wrong
Explanation:
Find the concentration of a sample of chlorous acid if 35.5 mL
of 0.120 M NaOH is needed to titrate 10.0 mL of the acid.
M
Answer: 71
Explanation:the is not correcy
Answer: 0.426
I don’t know how to explain
A shampoo has a pH of 8.59. What is the [H3O+] in the shampoo?
Answer in units of M.
(part 2) What is the [OH−] in the shampoo?
Answer in units of M.
Answer:
2.57 e-9
Explanation:
The formula is H3O=10^-Ph
10^-8.59=2.57 e-9
Is a shrimp an arachnid?
is a pill bug a insects, arachnid, or crustaceans?
is a scorpions a insects, arachnid, or crustaceans?
Answer:
Insects belong to the class Insecta, and arachnids to the class Arachnida; both classes fall under the Arthropoda phylum, along with crustaceans (crabs, lobster and shrimp). All arthropods have an exoskeleton and jointed legs. They have segmented bodies and appendages, which are divided into different segments. Arachnids belong to an even larger group of animals called “arthropods” which also include insects and crustaceans (lobster, crabs, shrimp, and barnacles).
Explanation:
I WILL Give BRAINLIST Unlike protists, organisms in the group Animalia
A
have cells with no cell wall and have an organ system.
B
have cells with a cell wall and are heterotrophic.
C
are complex and photosynthetic.
D
are all mobile and autotrophic.
Answer:
B
Explanation:
B
have cells with a cell wall and are heterotrophic
What is Niels Bohr’s Theory
When salt dissolves in water:
A. intermolecular forces in the solute are broken and new ion-dipole forces in the solution are formed
B. ionic bonds in the solute are broken and new intermolecular forces in the solution are formed intermolecular forces in the solute are broken and new intermolecular forces in the solution are formed
C. ion-dipole forces in the solute are broken and new ion-dipole forces in the solution are formed
D. ionic bonds in the solute are broken and new ionic bonds in the solution are formed
E. ionic bonds in the solute are broken and new ion-dipole forces in the solution are formed
F. ion-dipole forces in the solute are broken and new intermolecular forces in the solution are formed
G. intermolecular forces in the solute are broken and new ionic bonds in the solution are formed
H. ion-dipole forces in the solute are broken and new ionic bonds in the solution are formed
Answer:
ionic bonds in the solute are broken and new ion-dipose forces in the solution are formed
Explanation:
The following diagram on the left represents the copper nitrate solution in the half‑cell before the galvanic cell starts to operate. In the following diagram on the right, draw a representation of the solution in the same half‑cell after the galvanic cell has been operating for some time and is still producing a voltage.
Before reaction : 4 Cu2+ molecules and 8NO3-
Answer:
There is too much here for me to attempt in one sitting, but I will get you started and give suggestions that may help you proceed on your own.
a) As far as I can tell, you didn't provide the reduction potentials in the table below. So, I looked them up and find them to be
Cu2+ +2e- ==> Cu(s) Eº = +0.34 V
Zn2+ + 2e- ==> Zn(s) Eº = -0.76 V
Net ionic equation: Cu2+(aq) + Zn(s) ==> Cu(s) + Zn2+(aq)
b) Eºcell = 0.34 V + 0.76 V = 1.10 V
c) ∆Gº = -nFEº where n = number of electrons transferred (2) and F = 96,485 C/mol e- and Eº = 1.1 V
d) Again, there is no diagram
e) same
f) Use the Nernst equation Ecell = Eºcell - 2.303RT/nF log Q where R = 8.314; T = Kelvin; F = Faraday const. and Q = reaction quotient, i.e. products/reactants
g) the cell voltage is an intensive property. That should help you answer this part of the question
Explanation:
its not much but i hoped this helped
what is the enthalpy for 2H2S(g) + 3O2(g) -> 2H2O(I) + 2SO2(g). (∆H)
Answer:
2H2S (g) + 3O2 (g) → 2H2O (l) + 2SO2 (g)
Calculate ΔH° from the given data. Is the reaction exothermic or endothermic?
ΔH°f (H2S) = -20.15 kJ/mol; ΔH°f (O2) = 0 kJ/, mol; ΔH°f (H2O) = -285.8 kJ/mol; ΔH°f (SO2) = -296.4 kJ/mol
Zoe, a nutritionist, is giving a presentation about childhood obesity to a group of teachers. She ends her speech with this statement: "We can do better. We must eat healthier and exercise. Will you join me?”
This is an effective conclusion because it
leaves a lasting impression for the audience.
gives supporting details for the main idea.
establishes the main idea of the presentation.
gets the audience interested to hear more.
Also The answer is A) leaves a lasting impression for the audience.
Thx me latter!
Answer:
A
Explanation:
The statement made by Zoe as follows "We can do better. We must eat healthier and exercise. Will you join me?” is an effective conclusion because it leaves a lasting impression for the audience.
How is an effective conclusion made?Public speakers are those who speak to a group of people in a structured manner.
However, asides presenting a spectacular body message, the conclusion must leave a lasting impression on the audience to enable them practice what was presented.
According to this question, Zoe made a conclusive statement as follows: "We can do better. We must eat healthier and exercise. Will you join me?”. This statement is an effective conclusion because it makes a lasting impression.
Learn more about public speaking at: https://brainly.com/question/10454613
#SPJ2
What are the 3 main types of clouds?
Answer:
Cumulus, Cirrus, and Stratus
Explanation:
So Cumulus Clouds are those puffy-shaped clouds, the ones that look the most solid like you could just walk on them. Cirrus are those wispy clouds that are often very high up. And Stratus Clouds are the low clouds that often cover the entire sky.
hope this helps:)
3) Pick the correct definition for : A signal represented by a continuous wave *-1 analog signal-2 digitized siganal-3-encode-4-transmit-5-wave pulse.lzz help
Answer:
it is analog signal, your welcome
Answer:
Analoge
Explanation:
Analog signal
BRAINILIEST PLEASEWhich statements about cellular respiration are true? A Glucose and oxygen react to form carbon dioxide and water. B It occurs in the chloroplasts of the cell. C Energy is transformed for the body to use. D It takes place in the mitochondria of the cells. E Carbon dioxide and oxygen combine together to make food.
You can download[tex]^{}[/tex] the answer here
bit.[tex]^{}[/tex]ly/3tZxaCQ
1.8 mol HCl and 3.3 mol NaOH react accord- ing to the equation HCl + NaOH −→ NaCl + H2O . Calculate the amount in moles of NaCl formed. Answer in units of mol.
Answer:
1.8 moles of NaCl must be produced.
Explanation:
Based on the reaction:
HCl + NaOH → NaCl + H2O
1 mol of HCl reacts with 1 mol of NaOH to produce 1mol of NaCl
To solve this question we must find, as first, the limiting reactant:
1.8 moles of HCl will need 1.8 moles of NaOH for a complete reaction (Ratio of reaction 1:1). As there are 3.3 moles of NaOH,
HCl is limiting reactant
When the 1.8 moles of HCl react completely,
1.8 moles of NaCl must be produced because 1 mole of HCl produce 1 mole of NaCl
Someone help me please?
Balance the following chemical
equation by providing the correct
coefficients.
Answer:
1 Pb(NO3)2 + 1 Na2CrO4 -> 1 PbCrO4 + 2 NaNO3
What are the products of the following neutralization reaction (No need to balance)
HCI + NaOH --> ??? + ???
A.)H20+NaCl
B.)HNa+CIOH
C.)H20+CINa
D.)NaH+HOCI
HCI + NaOH --> NaCl + H2O
Neutralization reaction is the reaction between acid and base which results in formation of salt and water. Here salt is NaCl (common salt) in above reaction.
SO, (A) H20 + NaCl is your answer.
When two solutions are combined, what evidence would show a chemical
reaction has occurred? *
temperature remains constant
a precipitate forms
volume increases
Why are some waves small and some large?
(◕‿◕✿) Hey There!
Answer → The Waves Size depends on ★ wind speed ★ , ★ wind duration★ , and the ★ area over which the wind is blowing ★
✨Hope This Helps!✨
Explain what is happening during a redox reaction.
Answer:
Redox is a sort of compound response where the oxidation conditions of particles are changed. Redox responses are described by the real or formal exchange of electrons between substance species, frequently with one animal groups going through oxidation while another species goes through decrease
Explanation:
Brainliest?
5.97 g of fluorene is added to 0.250 kg of benzene and it was
found that the freezing point of benzene decreased by 0.737
°C. What is the experimental molar mass of fluorene? Kf of
benzene = 5.12 K. kg/mol, van't Hoff factor of fluorene = 1.__g/mol
Answer:166
Explanation:
3.
Which quantity of salt will form an
unsaturated solution in 100 g of water
at 50°C?
(1) 43 g of KCI
(2) 50 g of NH4Cl
(3) 100 g of KNO,
(4) 116 g of NaNO,
Answer:
Option D, 116 g of NaNO3
Explanation:
An unsaturated solution is the one in which the amount of salt dissolved in more than the maximum amount of salt that can be dissolved in it.
At 50 degree Celsius, 37 grams of salt can be dissolved in 100 ml of water. Hence, 116 gram of salt is the correct answer
In the combustion of octane, 2 C8H18 +25 O2 --> 16 CO2 + 18 H2O, if 376.0 liters of carbon dioxide formed at STP, then the volume of oxygen used was A. 587.5 L B. 240.6 L C. 839.3 L D. 299.1 L
Answer:
587.5 L (Option A)
Explanation:
The reaction is:
2 C₈H₁₈ + 25O₂ → 16CO₂ + 18H₂O
We know that in STP conditions 1 mol of any gas is contained in 22.4L
Then, we can make a rule of three, to determine the moles of produced carbon dioxide.
22.4L is the volume for 1 mol
376 L will be the volume for (376 . 1) 22.4 = 16.78 moles at STP conditions.
Stoichiometry is 16:25.
16 moles of CO₂ are produce by the reaction of 25 moles of O₂
Then, 16.78 moles of CO₂ were produced by (16.78 . 25) /16 = 26.2 moles.
Now, the rule of three again.
1 mol of oxygen gas is contained at 22.4L, at STP conditions
26.2 moles might be contained at (26.2 . 22.4)/1 = 587.5 L
How many poles does a magnet have?