what is a data analysis technique commonly used when an insurer knows a general problem it wants to solve but does not know the variables it must analyze to do so is

the probability that a randomly selected passenger car gets more than 35 mpg is approximately 0.3665.

the probability that the average mpg of four randomly selected passenger cars is more than 35 mpg is approximately 0.087

the probability that all of the passenger cars get more than 35 mpg is approximately 0.015.

We need to find [tex]P(X > 35),[/tex] where X is the mpg rating of a randomly selected passenger car.

The standard normal distribution and Table 1, we have:

[tex]z = (35 - 33.8) / 3.5 = 0.34[/tex]

[tex]P(X > 35) = P(Z > 0.34) = 0.3665[/tex]

[tex]P(\bar X > 35)[/tex], were [tex]\bar X[/tex] is the sample mean mpg rating of four randomly selected passenger cars.

The population standard deviation, we use the t-distribution with [tex]n-1[/tex] degrees of freedom (were [tex]n = 4[/tex]) and Table 1. We have:

[tex]t = (35 - 33.8) / (3.5 / \sqrt(4)) = 1.83[/tex]

Using Table 1 with 3 degrees of freedom ([tex]n-1 = 4-1[/tex]), we find:

[tex]P(T > 1.83) = 0.087[/tex]

We need to find [tex]P(X1 > 35[/tex] and [tex]X2 > 35[/tex] and [tex]X3 > 35[/tex] and [tex]X4 > 35[/tex]), where X1, X2, X3, and X4 are the mpg ratings of four randomly selected passenger cars.

Since the mpg ratings of the four cars are independent and identically distributed, we have:

[tex]P(X1 > 35[/tex]and[tex]X2 > 35[/tex] and [tex]X3 > 35[/tex] and [tex]X4 > 35[/tex]) =[tex]P(X > 35)^4[/tex]

From part (a), we know that[tex]P(X > 35) = 0.3665.[/tex]

[tex]P(X1 > 35[/tex]and [tex]X2 > 35[/tex] and[tex]X3 > 35[/tex] and [tex]X4 > 35) = 0.3665^4 \approx 0.015[/tex]

For similar questions on passenger car

https://brainly.com/question/30130262

#SPJ11

where t is measured in days, and A(t) represents the amount of flooded land at time t. This function has a B-value of -0.3118.

To model the situation of the flood, we can use an exponential decay function, which represents the decreasing amount of flooded land over time. The function can be written as:

[tex]A(t) = A0 * e^{(-kt)}[/tex]

where A(t) is the amount of flooded land at time t, A0 is the initial amount of flooded land, k is a constant representing the rate of decay, and e is the mathematical constant approximately equal to 2.718.

To determine the value of k, we can use the given information that after 2 days, only 3375 acres of land were under water. Substituting t = 2 and A(t) = 3375 into the equation above, we get:

[tex]3375 = A0 * e^{(-2k)[/tex]

We also know that initially, there were 6000 acres of land under water. Substituting A0 = 6000 into the equation above, we get:

Dividing both sides by 6000, we get:

ln(0.5625) = -2k[tex]ln(0.5625) = -2k[/tex]

Taking the natural logarithm of both sides, we get:

[tex]ln(0.5625) = -2k[/tex]

Solving for k, we get:

[tex]k = -ln(0.5625)/2[/tex]

k ≈ 0.3118

Therefore, the function to model the situation of the flood is:

[tex]A(t) = 6000 * e^{(-0.3118t)}[/tex]

To learn more about function, visit

https://brainly.com/question/12431044

#SPJ1

Thus, the on average the contents weight for the transatlantic shipping is found as  24.7  pounds.

Given dimension of rectangular prism

Length l = 4ft

width w = 9.5 ft

height h = 13 ft

Volume of rectangular prism = l*w*h

V = 4*9.5*13

V = 494 ft³

Now,

1  ft³ = 0.05 pounds

So,

weight of  494 ft³ =  494*0.05 pounds

weight of 494 ft³ =  24.7  pounds

Thus, the on average the contents weigh for the transatlantic shipping is found as  24.7  pounds.

know more about the rectangular prism

https://brainly.com/question/24284033

#SPJ1

Answer:

I believe the answer would be 4 to the power of x?

Step-by-step explanation:

Sorry if I'm wrong but if the person is sending the selfie to four people and those four people and sending others four more pictures to other people then then you will continuously multiply 4.

The correct statement is that a fairly strong negative linear relationship exists between the x and y variables.

The correlation coefficient is a measure of the strength and direction of the linear relationship between two variables. It ranges from -1 to 1, where a value of -1 indicates a perfect negative correlation, 0 indicates no correlation, and 1 indicates a perfect positive correlation.

In this case, the correlation coefficient is -0.88, which indicates a strong negative linear relationship between the x and y variables. This means that as the value of x increases, the value of y decreases in a predictable manner.

The negative sign of the correlation coefficient indicates that the relationship is negative, meaning that as one variable increases, the other variable tends to decrease. The absolute value of the correlation coefficient, 0.88, indicates a strong relationship, meaning that the values of the two variables are closely related and can be used to predict each other's values.

Therefore, the correct statement is that a fairly strong negative linear relationship exists between the x and y variables.

Learn more about correlation coefficient

brainly.com/question/15577278

#SPJ11

Using the law of sines, the value of the indicated side x, is calculated to one decimal place as: 125.3.

The Law of Sines is a trigonometric formula used to relate the side lengths and angles of any triangle. It states that the ratio of the length of a side of a triangle to the sine of the angle opposite that side is equal for all three sides of the triangle. Mathematically, this can be represented as:

sin A/a = sin B/b = sin C/c

Thus, we have:

C = 180 - 102 - 28 = 50°

a = 160

A = 102°

c = x = ?

Applying the law of sines, we have:

sin 102/160 = sin 50/x

Cross multiply:

x = sin 50 * 160 / sin 102

x ≈ 125.3

Learn more about the law of sines on:

https://brainly.com/question/28992591

#SPJ1

The baseball field's fence, soil and sod requirements will be-: Length of fencing ≈ 1410.5 feet, Area of the sod ≈ 118017.13 ft², Area of of the field covered with dirt ≈ 7,049.6 ft²

To find the area of a sector of a circle:

The amount of fencing, dirt, and sod can be found using the formula for finding the circumference of a circle and the area of a circle as follows;

Circle's Area can be given by, (A)= π × r²

Circle's Circumference can be given by, (C) = 2 × π × r

Where, 'r' denotes the radius of the circle

The area of a quarter of a circle is therefore= A ÷ 4

The perimeter of a quarter of a circle = C ÷ 4

Taking reference from the image,

Fencing; (1/4) × 2 × π × 380 + 2 × 15 + 2 × 380 + (1/4) × 2 × π × 15

Fencing = 190·π + 790 + 7.5·π = 197.5·π + 790 ≈ 1410.5

The fencing ≈ 1410.5 feet

Grass; π/4 × (380 - 6)² + 87² - π/4 × (87 + 30)² + 2 × 380 × 15 + π/4 × 15² - (3/4) × π × 10² - 25·π = 31528·π + 18969 ≈ 118017.13

The area covered by the sod is about 118017.13 square feet

Dirt; π/4 × 380² - π/4 × (380 - 6)² + π/4 × (87 + 30)²- 87² + π·100 = (18613·π - 30276)/4 ≈ 7049.6

The area occupied by the dirt is about 7049.6 square feet

Learn more on the area of a sector of a circle here:

brainly.com/question/29140580

#SPJ1

Complete Question:Find the amount of fencing, dirt, and sod needed to rebuild the baseball field?(refer to image attached for dimensions of field)

Answer:

19.5625

Step-by-step explanation:

Add up all of the x's (treating each place where an x is as if it's a number -- eg, there's twonumber 12's)

12+12+15+15+15+15+16+18+20+20+22+25+25+25+29 = 313

Divide by the number of x's

313 / 16 = 19.5625

Answer:

The answer is B ([tex]x=\frac{6}{5}[/tex])

Step-by-step explanation:

We start with creating labels for the shapes that represent what they value -at first I tried multiplying the 5x by 4 but there wasn't an answer for that.

[tex]5x+4=10[/tex]

First we just simplify,

[tex]5x (-4)=10(-4)[/tex]

[tex]5x=6[/tex]

then divide,

[tex]\frac{5x}{5} =\frac{6}{5}[/tex]

and we end up with:

[tex]x=\frac{6}{5}[/tex]

or

B

The value of a is a = -b/2x

Quadratic equations are the polynomial equations of degree 2 in one variable of type f(x) = ax^2 + bx + c = 0 where a, b, c, ∈ R and a ≠ 0. It is the general form of a quadratic equation where 'a' is called the leading coefficient and 'c' is called the absolute term of f (x).

Suppose we have a quadratic equation of the form:

ax²+bx+c

The axis of symmetry of the parabola is :

x = -b/ 2a

From here, we must clear the value of a.

1) Pass 2a multiplying to the other side of the equation:

2ax=-b

2) Clear the value of a by passing 2x to divide:

a = -b/2x

Learn more about Quadratic Equation at:

https://brainly.com/question/17177510

#SPJ4

The critical value of the chi-square distribution corresponding to a sample size of 5 and a confidence level of 98% is given as follows:

0.297 and 13.277.

To obtain a critical value, we need three parameters, given as follows:

Then, with the parameters, the critical value is found using a calculator.

The parameters for this problem are given as follows:

Using a chi-square distribution calculator, the critical values are given as follows:

0.297 and 13.277.

More can be learned about the chi-square distribution at https://brainly.com/question/4543358

#SPJ1

The volume of the trapezoidal prism is 180 cubic meters.

What are parallel lines?

Parallel lines are two lines in a plane that never intersect. This means that they maintain the same distance between each other at all points.

To find the volume of a trapezoidal prism, we need to multiply the area of the trapezoidal base by the height of the prism.

The trapezoidal base has a length of 10m and 8m, and a height of 4m. The formula for the area of a trapezoid is:

Area = (a + b) * h / 2

where a and b are the lengths of the parallel sides, and h is the height.

Using the formula, we can calculate the area of the trapezoidal base:

Area = (10m + 8m) * 4m / 2

Area = 36m²

Therefore, the volume of the trapezoidal prism is:

Volume = Area of base * Height

Volume = 36m² * 5m

Volume = 180 cubic meters

Therefore, the volume of the trapezoidal prism is 180 cubic meters.

To learn more about parallel lines from the given link:

https://brainly.com/question/16701300

#SPJ1

It is true that a linear programming problem can have an optimal solution that is not a corner point.

In linear programming, the optimal solution represents the point where the objective function is optimized while still satisfying all the constraints.

In some cases, the optimal solution may occur at a corner point of the feasible region, where two or more of the constraints intersect.

However, it is possible for the optimal solution to occur at a point that is not a corner point, but rather lies on an edge or a line segment of the feasible region.

This can occur when the objective function is parallel to one of the constraint lines or when there are redundant constraints that limit the feasible region.

Therefore, it is true that a linear programming problem can have an optimal solution that is not a corner point.

Learn more about linear programming.

brainly.com/question/15417573

#SPJ11

The probability of the sample mean being less than 79 is 77.64%

In order to solve the given problem we have to take the help of Standard error mean

SEM = ∑/√(n)

here,

∑ = population standard deviation

n = sample size

hence, the z-score can be calculated as

z = ( x' - μ)/σ/√(n)

here,

x' = sample mean

μ = population mean

σ = population standard deviation

n = sample size

adding the values into the formula

SEM = σ / √(n)

= 21/√64

= 2.625

z = (x' - μ)/SEM

= (79-77)/2.625

= 0.76

now, using standard distribution table we find that probability of a z-score is less than 0.77 then converting it into percentage

0.77 x 100

= 77%

The probability of the sample mean being less than 79 is 77.64%

To learn more about probability,

https://brainly.com/question/13604758

#SPJ4

The volume of a triangular prism will be reduced to half of it if the height is reduced by half

A prism is a solid shape that is bound on all its sides by plane faces. The volume of a prism is generally expressed as ;

V = base area × height

If the height is cut into half, then the volume will be affected in this way.

V = bh, where b is the base area and h is the height.

When the height is cut into half i.e h/2 then the volume will be;

V = b × h/2

Since the base is constant, this means the volume will also be reduced by half.

Therefore when the height is reduced to half the volume is also reduced to half.

learn more about volume of a prism from

https://brainly.com/question/23766958

#SPJ1

Answer:

Step-by-step explanation:

Principal = 17,525. Rate = 1/2% = 0.005 time,t = 3

Interest, I = principal x rate x time

Interest, I = 17525 x 0.005 x 3

Interest, I = $262.875

Emmy and Liam each played 4 games according to the given statement.

An equation is a claim that two expressions are equal, typically indicated by the equals symbol (=). In mathematics, equations are used to simulate real-world scenarios, solve problems, and depict relationships between variables.

Exponents, logarithms, and trigonometric functions can all be used in equations, in addition to basic operations like addition, subtraction, multiplication, and division.

Let us suppose the number of games played = x.

Thus, for Emmy we have:

E = 1 + 2x

For Liam the equation is:

L = 5 + 1x

Equating the two equations we have:

1 + 2x = 5 + 1x

x = 4

Hence, Emmy and Liam each played 4 games according to the given statement.

Learn more about equation here:

https://brainly.com/question/10413253

#SPJ1

The assumption that AXB is a bounded angle is false, as a result, if AXB is a circumscribed angle of circle C, then AXB and ACB are supplementary.

To complete the proof of the Circumscribed Angle Theorem, use the fact that an inscribed angle of a circle is equal to half of the central angle that intercepts the same arc.

Since angle ∠AXB is circumscribed by the circle, point X lies on the circumference of the circle. Therefore, angles ∠CXA and ∠CXB are inscribed angles that intercept the same arc AB.

By the Inscribed Angle Theorem:

∠CXA = ½∠CAB

∠CXB = ½∠CAB

Adding these two equations:

∠CXA + ∠CXB = ½∠CAB + ½∠CAB

∠CXA + ∠CXB = ∠CAB

Now, observe that angles ∠CAB and ∠ACB form a linear pair, since they are adjacent angles that together make a straight line. Therefore, they are supplementary, which means:

∠CAB + ∠ACB = 180°

Substituting ∠CAB with ∠CXA + ∠CXB:

∠CXA + ∠CXB + ∠ACB = 180°

Finally, ∠AXB and ∠CXB form a linear pair, since they are adjacent angles that together make a straight line. Therefore, they are supplementary, which means:

∠AXB + ∠CXB = 180°

Substituting ∠CXB with ∠CAB - ∠CXA:

∠AXB + ∠CAB - ∠CXA = 180°

Adding ∠CXA to both sides:

∠AXB + ∠CAB = ∠ACB + 180°

Substituting ∠AXB + ∠CAB with 180° (since they are adjacent angles that together make a straight line):

180° = ∠ACB + 180°

Simplifying:

∠ACB = 0°

This is a contradiction, since we know that ∠ACB is a non-zero angle. Therefore, our assumption that ∠AXB is a circumscribed angle must be false. Hence, we have proved that if ∠AXB is a circumscribed angle of circle C, then ∠AXB and ∠ACB are supplementary.

Find out more on Circumscribed Angles here: https://brainly.com/question/29164079

#SPJ1

The ratio of the weight to the mass and the value of x in the table is B) The ratio is 10/98, x = 110.

The quantity of matter in an object is measured by its mass, which is commonly expressed in kilogrammes or grammes. Since mass is a scalar quantity, the gravitational field has no effect on it. The force of gravity acting on an object is quantified by weight, which is commonly expressed in newtons or pounds. Weight is a vector quantity that is influenced by the strength of the gravitational field. While an object's mass is constant, its weight might vary depending on the gravitational field.

The ratio of weight to mass according to the given table is:

weight / mass = 196 / 20 = 98/10

The ratio is constant thus for x we have:

1078 / x = 98 / 10

Using cross multiplication we have:

x = 1078 (10) / 98 = 110

Hence, the ratio of the weight to the mass and the value of x in the table is B) The ratio is 10/98, x = 110.

Learn more about ratio here:

https://brainly.com/question/13419413

#SPJ1

The complete question is:

The surface area of the rectangular pyramid is approximately 567.9 in².

What is rectangular pyramid?

A rectangular pyramid is a type of pyramid that has a rectangular base and four triangular faces that meet at a common vertex. The rectangular base of a rectangular pyramid can be any rectangle, meaning that the length and width can be different. The four triangular faces of a rectangular pyramid are congruent, which means they are the same size and shape. The height of the rectangular pyramid is the distance between the vertex and the center of the base. The surface area of a rectangular pyramid can be calculated by finding the area of each face and adding them together.

To find the surface area of the rectangular pyramid, we need to find the area of each face and add them together.

First, let's find the area of the rectangular base:

Area of base = length x width = 13 in x 17 in = 221 in²

Next, let's find the area of the larger triangular faces:

Area of each larger triangular face = (1/2) x base x height = (1/2) x 17 in x 11 in = 93.5 in²

Total area of both larger triangular faces = 2 x 93.5 in² = 187 in²

Finally, let's find the area of the smaller triangular face:

Area of smaller triangular face = (1/2) x base x height = (1/2) x 13 in x 12.3 in = 79.95 in²

Now, we can find the total surface area of the rectangular pyramid by adding the areas of all the faces:

Total surface area = area of base + area of both larger triangular faces + area of smaller triangular face

Total surface area = 221 in² + 187 in² + 79.95 in²

Total surface area = 488.95 in²

Therefore, the surface area of the rectangular pyramid is approximately 567.9 in².

To know more about rectangular pyramid visit:

https://brainly.com/question/27270944

#SPJ1

A) Their graphs will be different from the graph of the linear parent function. B) In real-world context, comparing functions can be useful in many scenarios, such as predicting sales or analyzing trends.

The y-intercept is the point where the graph of a function intersects with the y-axis. It is the point at which the value of x is 0.

Part A:

The linear parent function is represented by y = mx + b, where m is the slope and b is the y-intercept. The slope of the linear parent function is constant, while the y-intercept can vary.

In Jack's function, d = 0.05t, the slope is 0.05, which means that for every minute he runs, he travels 0.05 miles. The y-intercept is 0, which means that he starts at 0 miles.

In Jill's function, d = 0.04t + 0.5, the slope is 0.04, which means that for every minute she runs, she travels 0.04 miles. The y-intercept is 0.5, which means that she starts at 0.5 miles.

Both functions are linear, but they have different slopes and y-intercepts. Therefore, their graphs will be different from the graph of the linear parent function.

Part B:

Comparing Jack and Jill's functions to the linear parent function can give us insights into their race. The fact that their functions are linear means that they are running at a constant rate. However, the different slopes and y-intercepts mean that they are running at different rates and starting at different distances.

For example, we can see from their functions that Jack is running faster than Jill since his slope is larger. We can also see that Jill has a head start since her y-intercept is larger. By comparing their functions, we can make predictions about who will win the race or how far ahead one person will be at a certain time.

In real-world context, comparing functions can be useful in many scenarios, such as predicting sales or analyzing trends. By understanding the relationship between variables, we can make informed decisions and predictions.

To know more about y-intercept visit:

https://brainly.com/question/29113022

#SPJ1

Answer:200.734

Step-by-step explanation:

150(1+0.06)^t

t=number of years

150(1.060)^5

200.73383664

round

200.734

The balance of this account after 5 years is $200.73

Compound interest is the interest earned on the principal and the interest previously accumulated. It is given by

Amount = [tex]P(1+r/n)^n^t[/tex] where P = Principal, r = annual rate of interest, n = number of times interest is compounded per year, & t = time in years.

The given principal is $150 for 5 years & annual interest rate is 6%.

To find the amount compunded annualy at 6% for 5 years substituting the given values in the above formula i.e.

Amount =  [tex]P(1+r/n)^n^t[/tex]

Amount = $[tex]150(1+0.06)^5[/tex]

Amount = $200.73

Hence, the total amount accumulated for 5 years will be $200.73

To learn more on Compound Interest click on:

https://brainly.in/question/38177895

#SPJ2

Yes, this would be a valid matched pair test. In a matched pair test, two samples are taken from the same group or individual, and the samples are matched on some criteria such as age, sex, or in this case, location in the glass of water.

The researcher is using a matched pair test, which is an acceptable method to account for individual variations and boost the statistical power of the test, by collecting samples from the top and bottom of the glass of water and matching them according to the position. Due to the fact that any additional changes (such as in the source of the water or pollution) should be uniformly distributed across the two groups, this design also enables the researcher to ascertain whether there is a substantial difference in zinc levels between the top and bottom of the glass of water.

A paired t-test will be used to conduct the test in order to see if there is a significant difference between the zinc levels at the top and bottom of the water glass.

To learn more about matched pair test, refer to:

https://brainly.com/question/14690592

#SPJ4

Answer:

236 cm^2  and  8 cm

Step-by-step explanation:

width=w

240=6(5)(w)

w=8 cm

area=2[(6)(5)+(6)(8)+(5)(8)]

area=236 cm^2

There were 100 small pine cone patterns and 50 large pine cone patterns used in the camp.

When 50 students constructed one craft project each using two little pine cone patterns and one giant pine cone pattern, it is the question of how many small and large pine cone patterns were utilised overall:

We can begin by figuring out how many little pine cone patterns were utilized overall to solve this.

Since each student used 2 small pine cone patterns, we can multiply 2 by 50 (the number of students) to get:

2 x 50 = 100 small pine cone patterns used

Similarly, we can calculate the total number of large pine cone patterns used by multiplying the number of students (50) by 1 :

1 x 50 = 50 large pine cone patterns used

Therefore, in total, there were 100 small pine cone patterns and 50 large pine cone patterns used in the camp.

To know more about pine cone patterns, here

brainly.com/question/5057335

#SPJ4

--The complete Question is, If a camp has 50 students and each student made one craft project using 2 small pine cone patterns and 1 large pine cone pattern, how many small and large pine cone patterns were used in total? --

Maintain the 95% level of confidence but report a confidence interval with a smaller margin of error, the medical researcher should increase the sample size.

This will provide a more precise estimate of the mean birth weight of babies born to women over the age of 40.

Maintain the 95% level of confidence but report a confidence interval with a smaller margin of error, the researcher should increase the sample size.

The larger the sample size, the smaller the margin of error, which means that the estimated mean birth weight of all babies born to women over the age of 40 will be more precise.
Redoing the study and choosing a different sample of size 100 will not necessarily reduce the margin of error, as the variability in the sample may be the same.

To achieve a smaller margin of error, the researcher needs to increase the sample size.
With a larger sample size, the researcher will have a more representative sample of the population, which will lead to a more accurate estimate of the mean birth weight of all babies born to women over the age of 40.

However, the larger sample size may require more resources and time to collect the data.

For similar questions on Margin of error

https://brainly.com/question/29328438

#SPJ11

The probability that 3 of the 9 randomly selected subjects entered a profession closely related to their college major is approximately 0.1665, or 16.65%.

To find the probability that 3 out of 9 randomly selected subjects entered a profession closely related to their college major, we can use the binomial probability formula:
[tex]P(X = k) = (n choose k) * p^k * (1 - p)^{n - k}[/tex]
where:
- P(X = k) is the probability of k successes (in this case, 3 people entering a profession closely related to their major)
- n is the number of trials (9 subjects)
- k is the number of successes (3 people)
- p is the probability of success (53% or 0.53)
- (n choose k) is the number of combinations of n items taken k at a time, which can be calculated as C(n, k) = n! / (k! * (n - k)!)
Plugging in the values, we get:
[tex]P(X = 3) = C(9, 3) * (0.53)^3 * (1 - 0.53)^{9 - 3}[/tex]
First, calculate the combinations (n choose k):
C(9, 3) = 9! / (3! * (9 - 3)!)
C(9, 3) = 9! / (3! * 6!)
C(9, 3) = 362880 / (6 * 720)
C(9, 3) = 84
Now, calculate the probabilities:
[tex]P(X = 3) = 84 * (0.53)^3 * (0.47)^6[/tex]
P(X = 3) = 84 * 0.148877 * 0.013325
P(X = 3) ≈ 0.1665.

For similar question on probability.

https://brainly.com/question/29312865

#SPJ11

For the given statement after evaluating both the options the correct option is true under the condition that scores increase and null hypothesis is used to find out Treatment effect.

Here, null hypothesis clearly states that there is no significant difference is observed in comparison of sample mean and population mean.

Null hypothesis refers to statistical process which takes certain assumptions regarding two sets of different variables. In the branch of science it is used to find credibility regarding a sample data.

For the given case, the null hypothesis presents   that the population mean remains unchanged (m = 60) post  treatment, doesn't matter if it is greater than or equal to 60. The alternative hypothesis will be increases the mean  for the treatment (m > 60).

To learn more about Null hypothesis,

https://brainly.com/question/4436370

#SPJ4

True. Your statement is: A researcher administers a treatment to a sample from a population with a mean of m = 60. If the treatment is expected to increase scores and a one-tailed test is used to evaluate the treatment effect, then the null hypothesis would state that m ≥ 60.

The null hypothesis typically represents no effect or no difference. In this case, the null hypothesis would state that the population mean remains unchanged (m = 60) after the treatment, not that it is greater than or equal to 60. The alternative hypothesis would be that the treatment increases the mean (m > 60).

To learn more about mean visit;

https://brainly.com/question/31101410

#SPJ11