*Visual
*Independent
*Dependent
widte speed rom me and distance 502
A yacht sailed at a steady speed for 0.5 hours, passing a cruise ship that was traveling at 25
kilometers per hour. During that time, the yacht traveled 50 kilometers. What was the yacht's
speed?
Write your answer as a whole number.
kilometers per hour
Submit
The speed of the yacht : 100 km/h
Further explanationLinear motion consists of 2: constant velocity motion with constant velocity and uniformly accelerated motion with constant acceleration
At constant velocity motion:the speed of vo = v = constant
acceleration = a = 0
Δx = vt or x = xo + vt
An equation of constant velocity motion
[tex]\large {\boxed {\bold {x = v \times \: t}}}[/tex]
x = distance = m
v = speed = m / s
t = time = seconds
A yacht sailed at a steady speed for 0.5 hours, and traveled 50 kilometers
so the velocity/speed:
[tex]\tt v=\dfrac{x}{t}\\\\v=\dfrac{50~km}{0.5~h}=\boxed{\bold{100~km/h}}[/tex]
Which of the following properly explains what takes place when light hits polarized film?
A) The intensity of the light is simply dimmed
B)The planes of light become scattered
C)The scattered light has either the horizontal plane or the vertical plane blocked
D)The intensity of the light is brighten
Answer:
C)The scattered light has either the horizontal plane or the vertical plane blocked
Explanation:
When light becomes plane polarized, it means that light is made to vibrate in only one plane.
Light usually vibrate in vertical and horizontal directions but when light becomes polarized, either the vertical or horizontal direction is blocked and it is made to vibrate in only one direction
which of the data sets qualitative data?
Answer:
any data should work as long as you get the question right it should be all fine if you i had this question once and i different sums of data each or each way i did it.
Calculate the energy of a photon with a frequency of 2.36 x 10-19 Hz.
Answer:
Explanation:
energy for photon is calculated in same wasy as for electromagnetic radiation
energy for electromagnetic radiation = hf
where f is the frequency of photon
h is Planck's constant = h = 4.14 × 10−15 eV · s.
thus
energy of photon = 4.14 × 10−15 eV · s * 2.36 x 10-19 Hz
energy of photon = 9.77 * 10−(-15+ -19) eV
energy of photon = 9.77 * 10−34eV answer
What is the product of Na +CaSO4,
Answer:
Na + CaSO4 = Na2SO4 + Ca
Explanation:
single displacement (substitution)
pls help ill mark as brainliest :)
Q9. NH4OH + HBr H2O + NH4Br
is this combustion, synthesis, single reaction, double reaction, decomposition ?
Answer:
I think its a double reaction
Explanation:
a piece of metal has a mass of 1.3 g/cm and a has a volume of 24.9 cm3 what is its mass
Answer:
34.611g
Explanation:
mass of metal = ?
density of metal = 1.39/cm³
volume = 24.9 cm³
density = mass/volume
mass = density × volume
= 1.39g/cm³ × 24.9 cm³
= 34.611g
Differences in states of matter are determined by
particle type
particle arrangement
particle color
distance between particles
Answer:
particle distance
solids are tightly packed
liquids are a little farther apart
and gases are very far
What is 8S8
In need for a quick answer
Answer:
8x8 Inc. is a provider of Voice over IP products. 8x8 products include cloud-based voice, contact center, video, mobile and unified communications for businesses.
Explanation:
how are subtances dissolved ?
Answer: A solute dissolves because its particles interact with the particles of a solvent. Anything that allows more solvent to touch more solute will cause a solute to dissolve more quickly. Small pieces of a substance dissolve faster than large pieces.
the amount of carbWhat is your carbon footprint?
the amount of carbon dioxide you use when recycling
the amount of oxygen put into the atmosphere due to your consumption of fossil fuels
the amount of carbon dioxide and oxygen in the atmosphere at any given time
the amount of carbon dioxide put into the atmosphere due to your consumption of fossil fuelson dioxide put into the atmosphere due to y
Answer:
D
Explanation:
what is the concept of the doppler effect?
A sound wave has a frequency of 20 Hz and a wavelength of 100 m. What is speed of the wave
The speed of a wave can be calculated using this formula:
v = f x λ
Where:
v is the wave speed in metres per second, m/s
f is the frequency in hertz, Hz
λ (lambda) is the wavelength in metres, m
Calculation:
Given:
f = 20 Hz
λ = 100m
Using the equation:
v = f x λ
v = 20 x 100
v = 2000 m/s
Therfore, the speed of the wave is 2000 m/s
A sound wave has a wavelength of 100 m and a frequency of 20 Hz. The wave's speed is 2× 10^3 m/s.
assuming frequency = 20 Hz and wavelength = 100 m
utilized concept: v= = 20×100 = 2×10³ m/s
Why is frequency important?The frequency in physics is the quantity of waves passing a fixed location in a unit of time. It also indicates how many cycles or vibrations a body in periodic motion experiences in a given unit of time.
How would you define sound?A sort of energy created by vibrations is sound. The molecules of the air surrounding an item vibrate as a result.. These molecules vibrate because they collide with nearby molecules, which also vibrate as a result.
To know more about Frequency, visit-
https://brainly.com/question/14316711
#SPJ2
What information does not need to be included a chemical waste label? Select one: Relative amounts of chemical compounds in the container. The date the waste container was filled completely. A description of the experiment the chemicals were used for. Names of the chemical compounds present in the container.
Answer:
A description of the experiment the chemicals were used for.
Explanation:
A chemical waste label is required to provide information about any hazardous waste present in the container. Some details are mandatory to mention of the chemical waste label to prevent any accident while doing the experiment, that includes:
Chemical compound's name present in the container.Composition and physical state of the waste.Hazardous properties of the waste.The date of manufacturing.Amount of chemical compounds filled in the container.A chemical waste label does not mention or describe the experiment for which the chemicals were used for, scientists, teacher or students should have knowledge of the chemical composition by reading their names and evaluate themselves on which chemical should be used for which experiment.
Hence, the correct answer is "A description of the experiment the chemicals were used for."
The correct answer is A description of the experiment the chemicals were used for.
A chemical waste label must contain all the information about any hazardous waste present in the container. It should clearly indicate the composition of the waste, the date of manufacturing and the amount of chemical compounds filled in the container. A chemical waste label does not need to mention the experiment for which the chemicals were used.
Learn more;
https://brainly.com/question/20368258
1. True or False? The scientific method is defined as a method of research
in which a problem is identified, data is gathered, and a hypothesis is
created based off the data, then the hypothesis is tested.
Answer:
true
Explanation:
please mark BRAINLIEST
Elena held a rock weighing 1 N in her hand. The rock has no velocity.
KE________?
KE = 0
Further explanationEnergy is the ability to do work
Energy because its motion is expressed as Kinetic energy (KE) which can be formulated as:
[tex]\large{\boxed{\bold{KE=\frac{1}{2}mv^2}}}[/tex]
So for two objects that have the same speed, the greater the mass of the object, the greater the kinetic energy
The stone in hand is in a motionless state (at rest) so that its velocity (v) = 0, so it has no kinetic energy
But this stone can have potential energy that is gained due to its height
A liquid has a volume of 225 mL and a mass of 150 g. What is its density? Round your answer to 2 decimal places.
Answer:
The answer is 0.67 g/mLExplanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\ [/tex]
From the question we have
[tex]density = \frac{150}{225} = \frac{2}{3} \\ = 0.66666666...[/tex]
We have the final answer as
0.67 g/mL to two decimal placesHope this helps you
What did Edwin Hubble discover about the universe?
O Distant stars are all moving away from us.
O The farthest stars are blueshifted.
O The stars in our galaxy are all moving away from us.
The universe is an unchanging place.
CAN SOMEONE PLEASE HELP ME ASAP PLEASEE ANYBODY LITERALLY ANYONE OUT THERE PLEASE
Which subatomic particle can be shared between separate atoms?
Answer:
Electrons
Explanation:
Atoms can combine together and share electrons between them. Atoms that share electrons are linked to each other in a form, called a molecule that is in a lower energy state than either of the separate atoms alone.
Pls Brainliest! It would mean a lot! ;)
With radiocarbon dating, scientists compare an object's carbon-14 levels with _____. the carbon-14 levels of an object from the same time period carbon-14 levels in the atmosphere the carbon-14 levels in the rock surrounding the object the object's carbon-12 levels
Answer:carbon-14 levels in the atmosphere
Explanation:
When carrying out radiocarbon dating, the level of carbon-14 in a sample is compared with the level of carbon 14 in the atmosphere because, objects exchange carbon-14 with the atmosphere.
Comparison of the activities of carbon-14 in the atmosphere and in the sample gives the age of the sample since the half-life of carbon-14 is a constant.
Which option is an example of a chemical property?
A. boiling point
B. ability to react with oxygen
C. color
D. density
Answer:
boiling point
Explanation:
Option B
A substance absorbed 895 J and caused its temperature to increase by 10 ºC. If the substance has a mass of 27.9 g, what is the substance's specific heat in J/(gºC) ?
1.) 3.21
2.) 4.62
3.) 1,406.25
4.) 249,705
Answer:
i dont get the equation sorry wish i can help
The temperature at which a substance in its solid state melts into the same substance in a liquid is known as
Answer:
0 C
Explanation:
I NEED THESE ANSWERED!!! PLEASEEE!!!!!
A metal sample weighs 56.8 grams. How many ounces does this sample
weigh? (1 lb = 16 oz)
Answer:
2 oz. just multiply 56.8 with 0.03527
Explanation:
Which statement best describes insoluble substances? Insoluble substances remain the same when in water. Insoluble substances become part of the liquid substance. Water does not remain when an insoluble substance is added. Insoluble substances change from solid to liquid states.
Answer:
Insoluble substances remain the same when in water.
Explanation:
When a substance is regarded as insoluble, it means that the substance remains the same in water.
Soluble substances usually form one continuous phase with water when they are added to water (eg when salt is added to water).
However, when camphor is added to water, it does not form a single phase with water. It remains the same in the water and maintains a separate phase from the water. Hence camphor is an insoluble substance.
name the gas evolved when metal carbonates react with acid and state the method
Answer:
the gas evolved is carbon dioxide
Explanation:
for example we can have a look at sodium carbonate reaction with hydrochloric acid
when sodium carbonate reacts with hydrochloric acid, it results in sodium chloride, carbon dioxide and water.
Answer: Carbon dioxide
Choose the coefficient for blank 1 (in front of Rb)
___ Rb + ___ P --> ___ Rb3P
options:
3
1
4
2
Answer:
3
Explanation:
Step 1: RxN
Rb + P → Rb₃P
Step 2: Balance RxN
We will need 3 Rb's on both sides.
3Rb + P → Rb₃P
Protons have about the same mass as:
A. plasma particles
B. neutrons
C. electrons
need help asap
Calculate the frequency for a wavelength of 635 nm.
Answer:
472114107.086614 MHz
Explanation:
f = C/λ
λ: Wavelength in meters
C: Speed of Light (299,792,458 m/s)