Answer:
A residual-current device or residual current circuit breaker,is a device that quickly breaks an electrical circuit to prevent serious harm from an ongoing electric shockA copper wire has a circular cross section with a raduis of 1.25mm. If the wire carries a current of 3.70A, find the drift speed of electron in this wire.
Answer: 0.043mm/s
Explanation:
The drift speed of electron in this wire will ba calculated as:
= I/nqA
= I/nqπr²
= 3.7/[(1.1 × 1^29) × (1.6 × 10^19) × (3.14 × 0.00125²)
= 4.3 × 10^-5
= 0.043mm/s
The drift speed of the electron in this wire is 0.043mm/s.
Please help me with this no wrong answer I am begging you please help me ASAP thanks
Answer: Hope This Helps!
Explanation:
1: The first one is true because, if it was full there would be more weight and you would have to apply more force for it to start moving. But an empty one you don't have to apply so much force to it. (Newtons 2nd Law.)
2: The second one is true because, the skate board has a lot of kinetic energy and when it hits the rocks a collosion occurs where all the enrgy points into the front of the board and the back side lifts of the floor so it flips over the rock.(Newtons 1st Law.)
3: The third one is false because, the road cant push onto the tire the tire can push onto the road though. Additional information: Also the when the tire pushes on the road friction happens and because of the rough surface of the road.(Newtons 3rd Law.)
5kg
P= 210 N
[2]
2 kg
3 kg
5 kg
P = 210 N
M = 0.2
141
1 kg
Answer:
2
Explanation:
ate kinus to plis ffffg
hello please help i’ll give brainliest
Answer:
B. Large mountain ranges
1 Write 7 next to the statements that are true.
Write F next to the statements that are false.
Then write corrected versions of the statements thatare false.
The pressure in a liquid dec reaches with depth.
The upthrust on an object is larger when it is deeper in a pool.
The bottom of a dam is thinner than the top of a dam.
The pressure is bigger at the bottom of a lake because of the weight of water above it
Answer: The pressure in a liquid dec reaches with depth. F
The pressure in a liquid increases with depth.
The upthrust on an object is larger when it is deeper in a pool. 7
The bottom of a dam is thinner than the top of a dam. F
The bottom of a dam is thicker than the top of a dam.
The pressure is bigger at the bottom of a lake because of the weight of water above it. 7
I think these are the answers.
How much power flows through a circuit with 5 amps and 120 volts?
Which is an example of negative acceleration?
A) a snowboarder who increases speed when traveling downhill
B) a biker who maintains a constant speed through a race
C) a skateboarder who reduces speed when moving up a hill
D) a runner who fluctuates speed by increasing and decreasing speed
Answer:
A) a snowboarder who increases speed when traveling downhill
A snowboarder who increases speed when traveling downhill will have negative acceleration.
What is acceleration ?
Acceleration is described as the rate of change of velocity with time.
[tex]a&=\frac{\Delta v}{\Delta t}[/tex]
Here, as the snowboarder is traveling in negative y direction therefore the final velocity will be great than initial velocity with negative sign. It should be noted that velocity and acceleration are vector quantities i.e. depends upon the direction in which they have been applied.
Also negative acceleration is denoted as the situation when the object moves in the direction that is opposite to its direction of velocity.
In the above situation, the force is being applied to travel downhill(speeding up in the negative direction) in the opposite direction which exemplifies negative acceleration.
Thus, option A is the correct answer.
Learn more about "Acceleration" here:
https://brainly.in/question/1251836
#SPJ6
Que fuerza será necesaria aplicar a un cuerpo de 20kg de masa para imprimirle una aceleración a=4m/s²
Answer:
La fuerza que será necesaria aplicar a un cuerpo de 20kg de masa para imprimirle una aceleración a=4m/s² es 80 N.
Explanation:
La segunda ley de Newton, llamada ley fundamental o principio fundamental de la dinámica, plantea que un cuerpo se acelera si se le aplica una fuerza.
De esta manera, esta ley establece que las aceleraciones que experimenta un cuerpo son proporcionales a las fuerzas que recibe. Dicho de otra forma, la aceleración de un cuerpo es proporcional a la fuerza neta que se le aplica. Cuanto mayor es la fuerza que se le aplica a un objeto con una masa dada, mayor será su aceleración.
La segunda Ley de Newton se expresa matemáticamente como:
F = m*a
Donde:
F es la fuerza neta. Se expresa en Newton (N) m es la masa del cuerpo. Se expresa en kilogramos (Kg.). a es la aceleración que adquiere el cuerpo. Se expresa en metros sobre segundo al cuadrado (m/s²).En este caso:
m= 20 kga= 4 m/s²Reemplazando:
F= 20 kg* 4 m/s²
Resolviendo:
F= 80 N
La fuerza que será necesaria aplicar a un cuerpo de 20kg de masa para imprimirle una aceleración a=4m/s² es 80 N.
at what distance from a -5.35*10^-6 C charge will the electric potential be -500 v?
Answer:
Different values of Q will make different values of electric potential V (shown in the image). The electric potential arising from a point charge Q, at a distance r from the charge is observed to be where ε0 is the permittivity of vacuum. VE is known as the Coulomb potential .Explanation:
The distance from the -5.35 × 10⁻⁶ C charge where the electric potential is -500 V is approximately 0.0935 meters or 9.35 cm.
To determine the distance from a charge where the electric potential is -500 V, we can use the formula for electric potential due to a point charge:
V = k × (Q / r)
Where:
V is the electric potential (in volts),
k is the Coulomb's constant (approximately 8.99 × 10⁹ Nm²/C²),
Q is the charge (in coulombs), and
r is distance from the charge (in meters).
Rearranging the formula, we solve for the distance:
r = k × (Q / V)
Substituting the given values into the equation
k = 8.99 × 10⁹ Nm²/C²,
Q = -5.35 ×10⁻⁶ C, and
V = -500 V,
r = (8.99 × 10⁹ Nm²/C²) × (-5.35 × 10⁻⁶ C / -500 V)
Calculating this expression:
r ≈ 0.0935 meters or 9.35 cm
Therefore, the distance from the -5.35 × 10⁻⁶ C charge where the electric potential is -500 V is approximately 0.0935 meters or 9.35 cm.
To know more about electric potential here
https://brainly.com/question/31173598
#SPJ2
What is transformation of energy
Answer:
Energy transformation
Explanation:
Energy transformation means the changing of energy from one type to another.
convert-73°c to kelvin scale
Answer:
200 K
Explanation:
0 °C = 273 K
-73°C = 273 K - 73 K = 200 K
light waves with a frequency of 7.26 x 10^14 HZ lies in the violet region of the visible spectrum. what is the wavelength of this frequency of light?
Answer:
4.13×10⁻⁷ m
Explanation:
Applying
v = λf................... Equation 1
Wherfe v = speed of light, λ = wavelength of light, f = frequency of light.
make λ the subject of the equation
λ = v/f....................... Equation 2
Note: Light is an electromagnetic wave, and all electromagnetic wave moves with thesame speed which is 3×10⁸ m/s.
From the question,
Given: f = 7.26×10¹⁴ Hz
Constant: v = 3×10⁸ m/s
Substitute these values into equation 2
λ = (3×10⁸)/(7.26×10¹⁴)
λ = 4.13×10⁻⁷ m
Re word this paragraph; so Its 'put in my own words' try to mix up the places of each sentences too please!
-
The sun creates three different types of electromagnetic radiation, which is considered harmful to humans. The light created includes X-rays, gamma rays, and ultraviolet light. These rays are harmful because of their high energy values, which are caused by their large frequencies. The gases of Earth's atmosphere absorb the high energy radiation, causing their molecules to move faster, but none of the light radiation reaches Earth's surface. Luckily for us, the high frequency of gamma rays and X-rays, as well as most ultraviolet light, cannot penetrate Earth's atmosphere and does not reach Earth's surface. If those harmful rays did reach Earth's surface it would make the planet plain to earth's
-
Answer:
here you go -
Explanation:
try using the paraphrasing tool website!
The sun makes three unique sorts of electromagnetic radiation, which is considered hurtful to people. The light made incorporates X-beams, gamma beams, and bright light. These beams are unsafe as a result of their high energy esteems, which are brought about by their enormous frequencies. The gases of Earth's air assimilate the high energy radiation, making their atoms move quicker, yet none of the light radiation arrives at Earth's surface. Fortunately for us, the high recurrence of gamma beams and X-beams, also as most bright light, can't enter Earth's environment and doesn't arrive at Earth's surface. In the event that those hurtful beams arrived at Earth's surface it would make the planet plain to earth's
Select ALL that describe what the atmosphere does for the earth.Atmosphere is a layer of gases that surround the earth.
Absorbs energy from sun
Protects and supports life
Recycles water and other chemicals
Protects life from high energy radiation and frigid vacuum of space
Answer:
A, B, C, E
Explanation:
The atmosphere does not recycle water and other chemicals
Throw a paper ball towards a hard wall.
a) Did the wall apply force on the ball? If yes, then what is the name of the force?
b) What are the effects of the force applied by the wall
please help..!
also if possible could you give the explanation too....??
what was the main cause of the near extinction of the black-footed ferret?
A. Climate change
B. Dwindling prairie dog populations
C. Natural predators
D. For hunters hunted them to extinction
Answer:
b
Explanation:
Someone help me with these questions
Answer:
Im not 100% sure so don't completly rely on these answer s
#1 is B
#2 ia B
#3 is A
#4 is A
#5 is A
and i think #6 is A
im 100% sure that 3 and 4 are A tho
Explanation:
A 31.7 kg kid initially at rest slides down a frictionless water slide at 53.2 degrees, how fast is she moving in 3.45 s later?
Answer:
34.55 m/s
Explanation:
The introduction of vaccines to the United States helped
is ammonia a substance
Answer:
yes
Explanation:
it is regulated in United States that is non flamable gas
A 1200 kg car rounds a curve of radius 80 meters banked at an angle of 20°. What speed must the car travel to experience no friction between the tires and the road?
Answer:
if you wanna watch it in English it's called dub
In your own words describe the relationship between pressure, volume and temperature when talking about a gas.
Answer:
The volume of a given gas sample is directly proportional to it's absolute temperature at constant pressure. The volume of a given amount of gas is inversely proportional to its pressure when the temperature is held constant.
Explanation:
everything is perished.........(is it,isn't it, aren't they, are they
Answer:
everything is perished isn't it?
hope it helps.
Answer:
isn't it is the answer of your question
hope it is helpful to you
Why does the pattern of colors repeat in a thin soap film? Please use 2 content related sentences. Need to refer to constructive interference and half wavelength intervals.
Answer:
A colorful interference pattern is observed when light is reflected from the top and bottom boundaries of a thin oil film. The different bands form as the film's thickness diminishes from a central runoff-point. ... So one set of light rays shine into a soap bubble, but two sets of rays come back out again.
do transistors amplfy a.c or d.c
Explanation:
thet amplify DC, because of the voltage ( small current input signal)
Answer:
Yes,by using direct coupling(transistors) amplifier we will amplify low frequency (DC) signals. A transistor is certainly capable of taking a small-current input signal and controlling a high-current output at the same voltage, thereby amplifying the power of the input signal whether it's AC or DC.
Can you give me brainliest?please?
P(A/B) - P(ANB)
P(B)
P(Girl|Sophomore)
Answer:
9/10
Explanation:
If 230 W of power is produced in 10 seconds, how much work is done?
Answer:
Hello There!!
Explanation:
Use this equation:Work done = Force x Distance.
Work done=230W×10s
Work done=2300J
hope this helps,have a great day!!
~Pinky~
[tex]\huge{\textbf{\textsf{{\color{navy}{An}}{\purple{sw}}{\pink{er}} {\color{pink}{:}}}}}[/tex]
Work done = force × distance
work done = 230W×10s
work done = 2300J
Thanks hope it helps.A typical sound wave has a wavelength of 1 meter. The wavelength of green light is about 500 billionths of a meter. Which type of wave will tend to diffract more through a narrow gap that is about 1 centimeter wide? Explain.
Answer: Sound wave diffracts more.
Explanation: Width of gap d is smaller than wavelength λ of the gap.
You can estimate it from equation d sin α = n λ
The constant n is order of diffraction, n = 0,1,2,..
sin α = n λ / d is greater when λ/d is greater.
Sound wave will tend diffract more through a narrow gap that is about 1 centimeter wide.
What is Diffraction?Diffraction is the spreading of waves around obstacles. Diffraction takes place with sound; with electromagnetic radiation, such as light, X-rays, and gamma rays; and with very small moving particles such as atoms, neutrons, and electrons, which show wave like properties.
d sin α = n λ
Width of gap d is smaller than wavelength λ of the gap.
The constant n is order of diffraction, n = 0,1,2,..
sin α = n λ / d
Diffraction is greater when λ/d is greater.
To learn more Diffraction about here
https://brainly.com/question/12290582
#SPJ2
im giving 20 points for this, its the 3 time i ask for help please
Atomic Mass = The sum of protons and neutrons in an atom. (Third option).
Atomic Number - The number of protons in an atom. (First option).
Mass Number - Exact amount of protons and neutrons (Last option).
Protons and Electrons - Charged particles of an atom (Fifth Option).
Protons and Neutrons - Particles in the Nucleus of an atom (Fourth option).
Valence Electons - Outermost particles of a shell. (Second Option).
Hope this helped!
Group 1 on the Periodic Table shares which characteristics?
A. They are all blue.
B. They react with other elements.
C. Almost all are metals.
D. Almost all are soft.
Answer:
b is your answer
Explanation:
Answer:
C
Explanation:
Group one elements share common characteristics. They are all soft, silver metals. Due to their low ionization energy, these metals have low melting points and are highly reactive. The reactivity of this family increases as you move down the table.