Answer:
please give me brainlist and follow
Explanation:
In electronics, a voltage divider (also known as a potential divider) is a passive linear circuit that produces an output voltage (Vout) that is a fraction of its input voltage (Vin). Voltage division is the result of distributing the input voltage among the components of the divider.
You are playing baseball and hit a single, running to first base. Your distance and displacement are
Answer choices:
A. Both 90 feet
B. Both 0 feet
C. Distance 90 feet Displacement 0 feet
D. Distance 0 feet Displacement 90 feet
Answer:
C. Distance 90 feet Displacement 0 feet
An elephant's legs have a reasonably uniform cross section from top to bottom, and they are quite long, pivoting high on the animal's body. When an elephant moves at a walk, it uses very little energy to bring its legs forward, simply allowing them to swing like pendulums. For fluid walking motion, this time should be half the time for a complete stride; as soon as the right leg finishes swinging forward, the elephant plants the right foot and begins swinging the left leg forward.
Answer:
is this the full question?
Explanation:
discuss impact of Newton's second law on roads
Answer:
The second law: When a force is applied to a car, the change in motion is proportional to the force divided by the mass of the car. This law is expressed by the famous equation F = ma, where F is a force, m is the mass of the car, and a is the acceleration, or change in motion, of the car
Given equal time periods, which statement about radioactive waste is correct?
A. Radioactive decay and nuclear fission always generate the same amount of waste.
B. Nuclear fusion generates less radioactive waste than radioactive decay does.
C. Nuclear fusion generates less radioactive waste than nuclear fission does.
D. Nuclear fission generates less radioactive waste than radioactive decay does.
how can we improve natural resources
Answer:
reduce, reuse, and recycle paper,plastic, electricity, glass, fiber
A vertical piston-cylinder device initially contains 0.1 m^3 of air at 400 K and 100 kPa. At this initial condition, the piston is resting on a stop. The piston-cylinder device is connected to a supply line with air at 400 K and a pressure of 500 kPa. The valve between the supply line and the piston-cylinder device is opened and is left open until the pressure in the piston-cylinder device reaches 500 kPa. The piston is observed to start moving when the pressure in the cylinder is 200 kPa and the piston continues to rise until it reaches a second stop. At the second stop, the piston-cylinder volume is 0.2 m^3 . The final temperature and pressure in the piston-cylinder device are 440 K and 500 kPa, respectively. Determine the heat transfer to or from the piston-cylinder device for the filling process Determine heat transfer (kJ) during the entire process.
Answer:
[tex]Q=-38.15kJ[/tex]
Explanation:
From the question we are told that
Piston-cylinder initial Volume of air [tex]v_1=0.1 m^3[/tex]
Piston-cylinder initial temperature [tex]T_1=400k[/tex]
Piston-cylinder initial pressure [tex]P_1= 100kpa[/tex]
Supply line temperature[tex]T_s=400k[/tex]
Supply line pressure [tex]P_s= 500kpa[/tex]
Valve final pressure [tex]P_v=500kpa[/tex]
Piston movement pressure [tex]P_m=200kpa[/tex]
Piston-cylinder final Volume of air[tex]v_2=0.2 m^3[/tex]
Piston-cylinder final temperature [tex]T_2=440k[/tex]
Piston-cylinder final pressure [tex]P_2= 500kpa[/tex]
Generally the equation for conservation of mass is mathematically given by
[tex]Q=m_2 \mu_2-m_1 \mu_1 +W-(m_2-m_1)h[/tex]
where
Initial moment
[tex]m_1=\frac{p_1 V_1}{RT_1}[/tex]
[tex]m_1=\frac{100*0.1}{0.287*400}[/tex]
[tex]m_1=8.7*10^-^2kg[/tex]
Final moment
[tex]m_2=\frac{p_2 V_2}{RT_2}[/tex]
[tex]m_1=\frac{500*0.3}{0.287*440}[/tex]
[tex]m_1=79*10^{-2}kg[/tex]
Work done by Piston movement pressure
[tex]W=Pd[/tex]
[tex]W=P(v_2-v_1)[/tex]
[tex]W=200(0.2-0.1))[/tex]
[tex]W=20000J[/tex]
Heat function
[tex]h=cT_1[/tex]
[tex]h=1.005(400)[/tex]
[tex]h=402[/tex]
Therefore
[tex]Q=(0.792*0.718(440)-0.0871*0.718(400)+20-(0.792-0.087)*402))[/tex]
[tex]Q=-38.15kJ[/tex]
It is given mathematically that the system lost or dissipated Heat of
[tex]Q=-38.15kJ[/tex]
Does anyone know 19 and 20 ??
IF ITS RIGHT YOU WILL GET 5 STARS AND A BRAINLY WITH A LIKE
Answer:
DNA IS SMALLEST
NUCLEUS IS BIGGEST
PLEASE MARK BAiniRINIiEST
During sublimation and deposition, this state of matter is skipped:
A) Solid
B) gas
C) liquid
A researcher is trying to identify whether household substances are basic. Which approach would BEST help the researcher
investigate whether substances are basic?
A. Test each substance with red litmus paper.
B. Test each substance with blue litmus paper.
C. Observe each substance and record its color.
D. Mix each substance with a weak base and record the results.
Answer:
a
Explanation:
because red litmus paper turn blues under base or alkaline condition
Paper clips, nails, and scissors all act as which of the following?
electromagnets
ion magnets
temporary magnets
I think its ion magnets correct me if I'm wrong
It takes 5000 J of work to lift a crate to a height of 5 m in 10 s of time.. Calculate the power.
Answer:
P = 500 W
Explanation:
Given that,
Work done to lift a crate to a height of 5 m is 5000 J
It takes 10 s
We need to find the power of the crate. We know that power is the rate of doing work. Mathematically, it can be given by :
[tex]P=\dfrac{W}{t}\\\\P=\dfrac{5000}{10}\\\\P=500\ W[/tex]
So, the power of the crate is equal to 500 W.
What is the momentum of a 4 kg object moving west at 4 m/s?*
O 12 kg*m/s (east)
O 1.33 kg*m/s (west)
O 16 kg*m/s (east)
16 kg*m/s (west)
Answer:
16kg*m/s west
Explanation:
P=M*V
Momentum= Mass time velocity, plug it into the formula,
M is 4 and V is 4, 4*4=16, and since the object is moving west its going to be west.
basically saying in simpler terms,
16=4*4
What is a mechanical advantage?
Answer:
B
Explanation:
A Mechanical Advantage is when you use a piece of machinery to help you do work, and it is an easy advantage.
A type of organism that makes its own food. __________
The highest taxonomic classification of organisms.__________
The process through which organisms make new organisms of the same kind. _______
The taxonomic classification below domains._________
A type of organism that is made of more than one cell and is more specialized and eukaryotic.__________
A characteristic passed from female and male parents to their offspring.________
FILL IN THE BLANKS PLEASEEE WILL GIVE BRAINLIEST AND 50 POINTS
Answer:
1. An autotroph
2. Domain
3. Reproduction
4. Kingdom
5. Multicellular Organism
6. Genetic trait
Explanation: Took Bio honors 1 & 2
particles q1, q2, and q3 are in a straight line. particles q1 = -5.00 x 10^-6 C, q2 = -5.00 x 10^-6 C. .5 between each what is the net force on q3
Answer:
1.12
Explanation:
Acellus
Answer: +1.12
Explanation:
This answer works for Acellus! :)
A car is traveling south at 70 miles per hour.
A.
acceleration
B.
velocity
C.
speed
D.
centripetal force
Answer:
velocity
Explanation:
velocity includes the direction taken by a person or object
a bullet of mass 120g is fired horizontally into a fixed wooden block with a speed of 20m\s. The bullet is brought to rest in a wooden block in 0.1secs by a constant resistance
calculate the;(I) magnitude of the resistance
(ii) distance moved by the bullet in the wood
Answer:
1) F = 24 N
2) Distance = 1 m
Explanation:
We are given;
Mass; m = 120 g = 0.12 kg
Initial velocity; u = 20 m/s
Final velocity; v = 0 m/s since it came to rest.
Time; t = 0.1 s
We can calculate acceleration from Newton's first equation of motion;
a = (v - u)/t
a = (0 - 20)/0.1
a = -200 m/s²
1) magnitude of the resistance will be;
F = ma
F = 0.12 × (-200)
F = -24 N
Since, we are dealing with the magnitude, we will take the absolute value. Thus, F = 24 N
2) To find the distance moved by the bullet, we know that;
Distance = Average speed × time
Thus;
Distance = ((v + u)/2) × t
Distance = ((0 + 20)/2) × 0.1
Distance = 1 m
GIVING BRAINLIEST PLEASE HELP!!
-if you answer correctly ill give you brainliest which will give you 25pts-
Answer:
A, and D are the answers
Explanation:
The pulley. It is located where the bicycle chain and gears are. The chain is wrapped around the pulley which turns and causes the wheel to turn on its axle.
In the system shown above, the pulley is a uniform disk with a mass of .75 kg and a radius of 6.5 cm. The coefficient of friction between the 5.8 kg mass and the horizontal surface is .25, and the ropes does not slip on the pulley. They system is released from rest. Use work-energy principles to determine the kinetic energy of the (a) 2.8 kg mass and (b) the pulley after the 5.8 kg mass has moved 2.2 meters.
Answer:
i am answering the same question 3rd time
please find the answer in the images attached.
A microphone is attached to a spring that is suspended from the ceiling, as the drawing indicates. Directly below on the floor is a stationary 375-Hz source of sound. The microphone vibrates up and down in simple harmonic motion with a period of 1.80 s. The difference between the maximum and minimum sound frequencies detected by the microphone is 2.75 Hz. Ignoring any reflections of sound in the room and using 343 m/s for the speed of sound, determine the amplitude (in m) of the simple harmonic motion.
Answer:
[tex]0.361\ \text{m}[/tex]
Explanation:
[tex]f_s[/tex] = Frequency of source = 375 Hz
[tex]\Delta f[/tex] = Difference between the maximum and minimum sound frequencies = 2.75 Hz
v = Speed of sound in air = 343 m/s
T = Time period = 1.8 s
[tex]v_m[/tex] = Maximum speed of the microphone
We have the relation
[tex]\Delta f=2f_s\dfrac{v_m}{v}\\\Rightarrow v_m=\dfrac{\Delta fv}{2f_s}\\\Rightarrow v_m=\dfrac{2.75\times 343}{2\times 375}\\\Rightarrow v_m=1.26\ \text{m/s}[/tex]
Amplitude is given by
[tex]A=\dfrac{v_mT}{2\pi}\\\Rightarrow A=\dfrac{1.26\times 1.8}{2\pi}\\\Rightarrow A=0.361\ \text{m}[/tex]
The amplitude of the simple harmonic motion is [tex]0.361\ \text{m}[/tex].
Geothermal energy is an alternative energy source, although it is not resourceful enough to replace more than a minor amount of the Earth’s energy needs. Why is this?
Answer: However, it is not resourceful enough to replace more than a minor amount of the Earth's energy needs. Drilling through the Earth to reach areas hot enough to create steam is possible, but very expensive and difficult. .
Explanation:
which process is the source of most oxygen in the atmosphere
Answer:
photosynthesis
The air that enters human lungs contains about 21 percent oxygen. The process responsible for producing most of the Earth's oxygen is known as photosynthesis. In this process, plants and certain other organisms convert sunlight into oxygen and other products.
Explanation:
Hope it helps! Correct me if I am wrong!
I'm sure about my answer!
If you dont mind can you please mark me as brainlest?
Its ok if you don't want to!
But i hopefully it helps you!
Answer:
Photosynthesis I think
Explanation:
In regions of the cardiovascular system where there is steady laminar blood flow, the shear stress on cells lining the walls of the blood vessels is about 20 N / M2. If the shear strain is about 0.008, estimate the shear modulus for the affected cells.
Answer:
Shear Modulus = 2500 Pa = 2.5 KPa
Explanation:
The shear modulus is defined as the ratio between the shear stress and the shear strain. Hence, the shear modulus, in this case, can be calculated by the use of the following formula:
[tex]Shear\ Modulus = \frac{Shear\ Stress}{Shear\ Strain}\\[/tex]
we have,
shear stress = 20 N/m²
shear strain = 0.008
Therefore,
[tex]Shear\ Modulus = \frac{20\ N/m^2}{0.008}\\\\[/tex]
Shear Modulus = 2500 Pa = 2.5 KPa
10. A jogger runs along a road for a distance of 2700 m. If it takes her 900 seconds
to run that distance, what is her speed?
Answer:
Speed = 3 m/s
Explanation:
Given the following data;
Distance = 2700m
Time = 900 s
To find the speed;
Speed can be defined as distance covered per unit time. Speed is a scalar quantity and as such it has magnitude but no direction.
Mathematically, speed is given by the formula;
[tex]Speed = \frac{distance}{time}[/tex]
Substituting into the equation, we have;
[tex]Speed = \frac{2700}{900}[/tex]
Speed = 3 m/s
Two objects collide. One of the objects deforms upon collision. What type of collision is this?
Select one:
A: Elastic collision, because energy is used to defom the object.
B: Inelastic collision, because energy is conserved.
C: Inelastic collision, because kinetic energy was lost when the object was deformed.
D: Elastic collision, because momentum is conserved.
Answer:
D Elastic collision because momentum is conserved
Explanation:
this is the answer may i be marked brainliest?
A system releases 150 kJ of heat while 10 kJ of work is done on the system by
the surroundings. Calculate the change in internal energy (in kJ).
Answer:
160J OR 140J
Explanation:
Depends on teacher which formula your teacher uses.
U=Q+W OR U=Q-W
Method 1:
U=150+10J=160
U=150-10=140J
Which is one-dimensional
A.
acceleration
B.
all of them
C.
speed
D.
velocity
Answer:
B
Explanation:
They are all one-dimensional
A person starts running from 2 m/s to 6 m/s in 2 seconds.
Calculate the person's acceleration.
Var
Variables:
Solve:
F
Formula:
Answer:
2 m/s²
Explanation:
From the question given above, the following data were obtained:
Initial velocity (u) = 2 m/s
Final velocity (v) = 6 m/s
Time (t) = 2 s
Acceleration (a) =?
The acceleration of the person can be obtained as follow:
v = u + at
6 = 2 + (a×2)
6 = 2 + 2a
Collect like terms
6 – 2 = 2a
4 = 2a
Divide both side by 2
a = 4 / 2
a = 2 m/s²
Therefore, the acceleration of the person is 2 m/s²
Explain how energy that comes from the outside of the Earth system drives the flow of water on surface currents.
Answer:
The ocean and atmosphere are connected. They work together to move heat and fresh water across the globe. Wind-driven and ocean-current circulations move warm water toward the poles and colder water toward the equator. ... The majority of the thermal energy at the Earth's surface is stored in the ocean.
Explanation:
The ocean and atmosphere are connected. They work together to move heat and fresh water across the globe. Wind-driven and ocean-current circulations move warm water toward the poles and colder water toward the equator. ... The majority of the thermal energy at the Earth's surface is stored in the ocean.