what is molarity? match the items in the left column to the appropriate blanks in the sentences on the right.

A specific safety concern when handling the TLC developing solvent used in this experiment is to keep it away from open flames or hot surfaces. Option 2 is correct.

The TLC developing solvent used in this experiment is often a flammable organic solvent such as ethyl acetate or hexane. These solvents have a low flash point, which means they can ignite easily and burn rapidly if exposed to an ignition source such as an open flame or hot surface.

Therefore, it is important to keep the solvent away from open flames or hot surfaces to prevent fires and explosions. In addition, it is recommended to handle these solvents in a well-ventilated area to minimize the risk of inhalation or skin exposure. It is also important to avoid contact with reactive metals, as some solvents can react with metals to form hydrogen gas, which can be flammable or explosive.

Finally, these solvents should not be mixed with water, as they are immiscible and can form separate layers, which can cause splattering or other hazards. Hence Option 2 is correct.

To learn more about TLC developing solvent, here

https://brainly.com/question/17562109

#SPJ4

Answer:

Answer (Detailed Solution Below)

Explanation:

Option 3 : Substance in solid phase has the least entropy.

CH4 has only sigma bonds between the carbon and hydrogen atoms, and no pi bonds.

The answer is (E) CH4.

Pi bonding refers to the sharing of electrons between two atoms that occurs when two atomic orbitals with parallel electron spins overlap. Pi bonds are formed by the sideways overlap of two p orbitals.

In the given options, all except CH4 have pi bonds:

(A) CO2 has two pi bonds between the carbon atom and the oxygen atoms.
(B) C2H4 has a double bond between the two carbon atoms, which consists of one sigma bond and one pi bond.
(C) CN− has a triple bond between the carbon and nitrogen atoms, consisting of one sigma bond and two pi bonds.
(D) C6H6 has six pi bonds due to the delocalized pi electron system in the benzene ring.

In contrast, CH4 has only sigma bonds between the carbon and hydrogen atoms, and no pi bonds.

Visit to know more about Sigma bonds:-

brainly.com/question/31377841

#SPJ11

0.0074 mol of nitronium ion is needed to react with 1 g of acetanilide

To determine the amount of nitronium ion needed for the reaction with 1 g of acetanilide, we will first calculate the moles of acetanilide and then apply stoichiometry.

Given that the molecular mass of acetanilide is 135.17 g/mol, we can calculate the moles of acetanilide:

moles = mass / molecular mass
moles = 1 g / 135.17 g/mol ≈ 0.0074 mol

Now, we need to determine the stoichiometry of the reaction between acetanilide and nitronium ion. Assuming the reaction is a 1:1 ratio (i.e., one mole of acetanilide reacts with one mole of nitronium ion), the amount of nitronium ion needed would be the same as the moles of acetanilide.

Thus, approximately 0.0074 mol of nitronium ion is needed to react with 1 g of acetanilide. Remember to consider the reaction's stoichiometry when applying this calculation to other scenarios or chemical reactions.

Know more about stoichiometry here:

https://brainly.com/question/14420683

#SPJ11  

Precautions when adding water to rock salt: Add water slowly and carefully to avoid splashing ; Precautions during filtration stage: Use filter paper that fits the funnel properly ; Precautions during (i) evaporation to dryness and (ii) crystallization: Avoid overheating solution during evaporation and stirring the solution.

Physical process by which a liquid substance is transformed into  gaseous state is called evaporation.

Precautions and their explanations:

Precautions when adding water to rock salt:

Add water slowly and carefully to avoid splashing or spilling.

Use a stirring rod to dissolve salt crystals completely.

Explanation: Rock salt can be quite reactive with water, and adding too much water too quickly can cause the solution to boil or splatter. Using a stirring rod helps to dissolve salt crystals completely without creating too much agitation.

Precautions during filtration stage:

Use a filter paper that fits the funnel properly and fold it properly.

Avoid touching filter paper with your fingers.

Explanation: The filter paper needs to fit the funnel properly to ensure that all of the liquid is filtered properly.

Precautions during (i) evaporation to dryness and (ii) crystallization:

Avoid overheating solution during evaporation and stirring the solution.

Use a clean glass rod to encourage crystallization and avoid scratching the walls of the container.

Explanation: Overheating the solution can cause the salt to decompose or change its chemical properties. Stirring the solution can also lead to the formation of smaller crystals.

To know more about evaporation, refer

https://brainly.com/question/9339710

#SPJ1

The sample of pure carbon would contain approximately 2.135 x 10²⁴ carbon atoms.

The majority of carbon atoms—98.93%—have masses of 12 atomic mass units. A mass of 13.00 atomic mass units is present in 1.07% of the carbon atoms. 14.) Identify one distinction between the nuclei of carbon-12 and carbon-13 atoms in terms of the subatomic particles that can be discovered there.

First, using the atomic mass of carbon, we must determine how many moles of carbon are present in the sample:

1 mole of carbon atoms = 12.01 g of carbon atoms (atomic mass of carbon)

42.552 g of carbon atoms / 12.01 g/mol = 3.545 moles of carbon atoms

Using Avogadro's number, we can then determine how many carbon atoms are present in the sample:

Number of carbon atoms = 3.545 moles of carbon atoms x 6.022 x 10²³ atoms/mole

Number of carbon atoms = 2.135 x 10²⁴ atoms

To know more about carbon atoms visit:-

https://brainly.com/question/30507533

#SPJ1

The volume of the stock solution is approximately 0.975 liters, to the thousandths place.

To calculate the volume of the stock solution, you can use the dilution formula:

C₁V₁ = C₂V₂

where:
C₁ = concentration of the stock solution (0.400 M KOH)
V₁ = volume of the stock solution (unknown, in liters)
C₂ = concentration of the diluted solution (0.130 M KOH)
V₂ = volume of the diluted solution (3.00 L)

Rearrange the formula to solve for V1:

V1 = C₂V₂ / C₁

Now, plug in the given values:

V₁ = (0.130 M KOH * 3.00 L) / 0.400 M KOH

V₁ ≈ 0.975 L
know more about stock solution here

https://brainly.com/question/25256765#

#SPJ11

We can conclude that the value of A must be less than the value of B. Based on the graph, the value of B is around 0°C. So, we can estimate that the value of A is likely to be around -10°C to 0°C.

What is Temperature?

Temperature is a physical quantity that measures the degree of hotness or coldness of an object or substance. It is a measure of the average kinetic energy of the particles that make up a system.

In simpler terms, temperature is a measure of how fast the atoms and molecules in a substance are moving. When the particles are moving faster, the temperature is higher, and when they are moving slower, the temperature is lower.

Based on the given information, we know that at time 0 minutes, the temperature is labeled as A. Therefore, to find the temperature value of A, we need to look at the y-axis at time 0 minutes.

Since the temperature scale is not given, we cannot determine the numerical value of A directly. However, we can make some observations about the graph to infer the approximate value of A.

Learn more about Temperature from the given link

https://brainly.com/question/26866637

#SPJ1

The total number of joules of heat energy needed to raise the temperature of 10 grams of water from 20°C to 30°C is 418.4 J. The specific heat capacity of water is 4.184 J/g·°C.

To find the total heat energy needed, we can use the formula:

Q = m·c·ΔT

where:

Q = heat energy (in Joules)

m = mass of the water (in grams)

c = specific heat capacity of water (4.184 J/g·°C)

ΔT = change in temperature (in °C)

Substituting the values given, we get:

Q = 10 g × 4.184 J/g·°C × (30°C - 20°C)

Q = 418.4 J

Therefore, the total number of joules of heat energy needed to raise the temperature of 10 grams of water from 20°C to 30°C is 418.4 J.

Learn more about heat energy

https://brainly.com/question/29210982

#SPJ4

At 300 K, some of the donors will ionize, releasing electrons into the conduction band. The concentration of extrinsic conduction electrons can be calculated using the equation [tex]n = N_D * exp(-E_D/kT),[/tex] where n is the concentration of electrons, [tex]N_D[/tex] is the donor concentration, [tex]E_D[/tex] is the binding energy of the donors, k is Boltzmann's constant, and T is the temperature in Kelvin.

(b) At 300 K, some electrons will also be thermally excited into the conduction band, creating intrinsic conduction. The concentration of intrinsic conduction electrons can be calculated using the equation [tex]n_i = N_C * exp(-E_G/2kT)[/tex] , where [tex]n_i[/tex] is the concentration of electrons, [tex]N_C[/tex] is the effective density of states in the conduction band, and [tex]E_G[/tex] is the bandgap energy.

(c) The contribution of intrinsic conduction is generally smaller than that of extrinsic conduction, as the concentration of dopants is usually much higher than the intrinsic carrier concentration at room temperature.

Learn more about electrons ,

https://brainly.com/question/1255220

#SPJ4

The average repeat unit molecular weight for average molecular weight of 229,500 g/mol and a number degree of polymerization of 4,000 is equals to the 57.4 g/mol. So, option(c) is right one.

Polymers are large molecules made up of repeating structural units linked together. The degree of polymerization (DP) is the number of repeating units in the polymer molecule. The average molecular weight is the degree of polymerization (MP) multiplied by the molecular weight of the repeat unit (m) is written as [tex] \bar M_n = (DP)(m)[/tex]

We have a random copolymer produced by polymerization of vinyl chloride and propylene.

Average molecular weight= 229500 g/mol

Number degree of polymerization = 4000

Using the above formula, the average repeat unit molecular weight = 229500 g/mol/ 4000

= 57.37 ~ 57.4 g/mol

Hence, required value is 57.4 g/mol.

For more information about degree of polymerization, visit :

https://brainly.com/question/30751495

#SPJ4

The molar mass of the unknown gas is 27.0 g/mol.

According to the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature. At STP, the pressure is 1 atm, the volume is 2.5 L, and the temperature is 273.15 K.

To find the number of moles of gas present, we can rearrange the ideal gas law equation to solve for n:

n = PV/RT

Substituting the values at STP, we get:

n = (1 atm) x (2.5 L) / [(0.08206 L atm/mol K) x (273.15 K)]

n = 0.1018 moles

The difference in weight between the gas-filled vessel and the evacuated vessel is 2.75 g, which is the weight of 0.1018 moles of the unknown gas.

So the molar mass of the gas can be calculated as:

molar mass = mass / moles

molar mass = 2.75 g / 0.1018 mole

molar mass = 27.0 g/mol

Therefore, the molar mass of the unknown gas is 27.0 g/mol.

Learn more about , the molar mass

https://brainly.com/question/22997914

#SPJ4

The molar mass of the unknown gas is 27.0 g/mol.

According to the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature. At STP, the pressure is 1 atm, the volume is 2.5 L, and the temperature is 273.15 K.

To find the number of moles of gas present, we can rearrange the ideal gas law equation to solve for n:

n = PV/RT

Substituting the values at STP, we get:

n = (1 atm) x (2.5 L) / [(0.08206 L atm/mol K) x (273.15 K)]

n = 0.1018 moles

The difference in weight between the gas-filled vessel and the evacuated vessel is 2.75 g, which is the weight of 0.1018 moles of the unknown gas.

So the molar mass of the gas can be calculated as:

molar mass = mass / moles

molar mass = 2.75 g / 0.1018 mole

molar mass = 27.0 g/mol

Therefore, the molar mass of the unknown gas is 27.0 g/mol.

Learn more about , the molar mass

brainly.com/question/22997914

Systematic name of this structure is 3-ethylpentane.

Chemical compounds known as isomers have identical chemical formulae but have different properties and atom arrangements inside the molecule. The term "isomer" refers to a substance that exhibits isomerism.

Structural isomers are substances with the same molecular formula but distinct atomic configurations. The way the atoms are attached in this instance is quite different, as seen by the different types of chains that are formed (straight versus branched), the placements of the atoms (such as middle versus end of the parent chain), and the presence of functional groups (e.g., aldehydes versus ketones).

For instance, although sharing the same molecular formula (C3H6O), propanal and propanone have very distinct chemical structures. They are structural isomers as a result.

Isomers of Heptane are:

To learn more about isomers, refer:

brainly.com/question/12796779

#SPJ4

The complete question is: The alkane C7H16 exhibits structural isomerism. In fact, 9 structural isomers have this same formula (but different bond arrangements). One such isomeric structure is: What is the correct systematic name for this structure?

Neither A, B, C nor D. The equilibrium position will not be affected by the change in volume.

To determine how the equilibrium of the reaction 2 NO(g) + Cl₂(g) ⇌ 2 NOCl(g) will shift if the volume of the container is decreased by one-half, we first need to calculate the reaction quotient Q.

The balanced chemical equation for the reaction is:

2 NO(g) + Cl₂(g) ⇌ 2 NOCl(g)

At equilibrium, the concentrations of the species are:

[NO] = 0.050 M

[Cl2] = 0.050 M

[NOCl] = 0.50 M

Using these values, we can calculate the value of the reaction quotient Q:

Q [tex]= [NOCl]^2 / ([NO]^2[Cl2])[/tex]= [tex](0.50)^2 / ((0.050)^2 x 0.050)[/tex] = 1000

Now we compare the value of Q to the equilibrium constant Kc:

Kc =[tex][NOCl]^2 / ([NO]^2[Cl2])[/tex] = 2000

Since Q < Kc, we can conclude that the reaction has not yet reached equilibrium and that the forward reaction will proceed to reach equilibrium.

When the volume of the container is decreased by one-half, the concentration of all species will increase due to the decrease in volume. According to Le Chatelier's principle, the reaction will shift in the direction that reduces the total number of moles of gas.

In this case, the reaction produces two moles of gas on the left-hand side and two moles of gas on the right-hand side, so the total number of moles of gas does not change. Therefore, the volume change will not have an effect on the equilibrium position.

Learn more about  equilibrium here:

https://brainly.com/question/30807709

v

#SPJ11

The correct answer is: C. Q = 1000, and the reaction will proceed toward reactants.

To determine which statement is true if the volume of the container is decreased by one-half, we need to calculate the reaction quotient (Q) for the new conditions.

When the volume is decreased by half, the concentrations of all species will double:

NO(g): 0.050 * 2 = 0.100 M
Cl2(g): 0.050 * 2 = 0.100 M
NOCl(g): 0.50 * 2 = 1.00 M

Now, calculate Q using the new concentrations:

Q = [NOCl]^2 / ([NO]^2 * [Cl2])
Q = (1.00)^2 / ((0.100)^2 * (0.100))
Q = 1 / 0.001
Q = 1000

So, Q = 1000. Now, compare Q to Kc:

Q > Kc, meaning the reaction will proceed toward the reactants to reach equilibrium.

To know more about Reaction Quotient:

https://brainly.com/question/24202150

#SPJ11

The amino acid that contains the R groups that are hydrophobic are the non - polar.

The Amino acids are the building blocks of the molecules of the  proteins. These contains the one hydrogen atom and the one amine group, the one carboxylic acid group and the one side chain that is the R group will be attached to the central carbon atom.

The side chains of the non polar amino acids includes the long carbon chains or the carbon rings, which makes them bulky. These are the hydrophobic, that means they repel the water. Therefore the non-polar amino acids are the hydrophobic.

To learn more about amino acid here

https://brainly.com/question/12788134

#SPJ4

The volume of the sample of wood is 110.9 mL.

Volume is the measure of the amount of space which is occupied by an object or the substance. It is usually expressed in units such as liters, milliliters, cubic meters, or cubic centimeters. The volume of a solid can be calculated by measuring its dimensions and using mathematical formulas, while the volume of a liquid can be measured directly using a graduated cylinder or a pipette.

To find the volume of the sample of wood, we can apply the following formula;

Density = Mass/Volume

Rearranging the formula, we get;

Volume = Mass/Density

Substituting the given values, we get:

Volume = 95.1 g / 0.857 g/mL

Volume = 110.9 mL

To know more about volume here

https://brainly.com/question/1578538

#SPJ4

A pure substance (such as H₂O or iron) can only exist in three phases (solid, liquid, and gas) - True.

A kind of matter with a predictable chemical composition and physical characteristics is referred to as a chemical substance. According to certain texts, a chemical compound cannot be physically divided into its component parts without rupturing chemical bonds. Chemical compounds, alloys, and simple substances (substances made up of a single chemical element) are all examples of chemical substances.

To distinguish them from mixes, chemical compounds are frequently referred to as 'pure'. Pure water is a popular illustration of a chemical substance; regardless of whether it is separated from a river or created in a lab, it has the same characteristics and hydrogen to oxygen ratio. Other chemicals that are frequently found in their purest forms are refined sugar (sucrose), gold, table salt (sodium chloride), and diamond (carbon). In reality, though, no material is completely pure, and chemical purity is determined by the chemical's intended application.

Learn more about Pure substance:

https://brainly.com/question/18452279

#SPJ4

The equator of the sun rotates faster than the poles.

The equator of the sun rotates faster than its poles. This is known as differential rotation, and it is due to the fact that the sun is not a solid body, but is composed of gas and plasma. The equatorial regions of the sun rotate faster because they are farther from the center of the sun, where the gravitational pull is stronger, and thus experience less resistance to their motion.

The period of rotation of the equator of the sun is shorter than that of the poles. The equator rotates once every 25.4 days, while the poles rotate once every 36 days.

Learn more about the sun:https://brainly.com/question/17376727

#SPJ1

We need 0.0161 liters of the 2.07 M sulfuric acid solution to make 57 milliliters of a 0.58 M solution of sulfuric acid.

We need to use the formula:

C1V1 = C2V2

Where

We want to find the volume of the 2.07 M sulfuric acid solution needed to make 57 milliliters of a 0.58 M solution. Let's plug in the values we know:

2.07 M * V1 = 0.58 M * 57 mL

Simplifying the equation, we get:

V1 = (0.58 M * 57 mL) / 2.07 M

V1 = 16.0874 mL

To convert the volume to liters, we divide by 1000:

V1 = 16.0874 mL / 1000 mL/L

V1 = 0.0161 L

Therefore, we need 0.0161 liters of the 2.07 M sulfuric acid solution to make 57 milliliters of a 0.58 M solution of sulfuric acid.

Learn more about concentration here : brainly.com/question/28564792

#SPJ1

The volume of 4.50 moles of nitrogen gas at STP is approximately 101 L. So, the correct answer is 101 L.

At STP (standard temperature and pressure), the volume of one mole of any gas is 22.4 liters. Therefore, to find the volume of 4.50 moles of nitrogen gas at STP, we can simply multiply the number of moles by the molar volume:

At STP (Standard Temperature and Pressure), the volume of 4.50 moles of nitrogen gas (N2) can be calculated using the ideal gas law:

PV = nRT

Where P is the pressure (which is 1 atm at STP), V is the volume, n is the number of moles, R is the gas constant, and T is the temperature (which is 273.15 K at STP).

Rearranging this equation to solve for V, we get:

V = (nRT)/P

Substituting the values for n, R, P, and T, we get:

V = (4.50 mol x 0.08206 L atm K^-1 mol^-1 x 273.15 K)/1 atm

V = 101.3 L

For such more questions on STP:

https://brainly.com/question/27100414

#SPJ11

The number of moles of acid and base that react depends on the stoichiometry of the chemical reaction and the amounts of reactants used

Without additional information about the chemical reaction or system being referred to, we cannot determine the number of moles of acid and base that reacted.

If we assume that the orange spheres represent sulfate ions in a specific reaction, then we would need to know the stoichiometry of the reaction to determine the number of moles of acid and base that reacted.

For example, if the reaction involved sulfuric acid ([tex]H_2SO_4[/tex]) and sodium hydroxide (NaOH) and the orange spheres represent sulfate ions ([tex](SO_4)^{2-[/tex]), then the balanced chemical equation would be:

[tex]H_2SO_4 + 2NaOH - > Na_2SO_4 + 2H_2O[/tex]

In this case, we would need to know the amount of sodium hydroxide used to determine the number of moles of acid and base that reacted. If we know the number of orange spheres representing sulfate ions and the amount of sodium hydroxide used, we can determine the moles of acid and base that reacted.

For such more questions on Stoichiometry:

https://brainly.com/question/30417834

#SPJ11

The theoretical yield of phenacetin is 0.17922 g. However, the actual yield may be lower due to factors such as incomplete reaction, loss during purification, or experimental error.

To calculate the theoretical yield of phenacetin, we need to first determine the limiting reagent. The limiting reagent is the reactant that will be completely consumed in the reaction, thus limiting the amount of product that can be produced.

First, we need to convert the volume of bromoethane given in milliliters to grams, using its density:

0.12 ml x 1.47 g/ml = 0.1764 g bromoethane

Next, we can use the molar masses of p-acetamidophenol and bromoethane to determine the number of moles of each:

moles p-acetamidophenol = 0.151 g / 151.16 g/mol = 0.001 mol

moles bromoethane = 0.1764 g / 108.97 g/mol = 0.00162 mol

Since the reaction requires a 1:1 molar ratio of p-acetamidophenol to bromoethane, and the number of moles of p-acetamidophenol is smaller than the number of moles of bromoethane, p-acetamidophenol is the limiting reagent.

The theoretical yield of phenacetin can be calculated using the molar mass of phenacetin and the number of moles of p-acetamidophenol:

moles phenacetin = 0.001 mol p-acetamidophenol

mass phenacetin = 0.001 mol x 179.22 g/mol = 0.17922 g

For such more questions on Phenacetin:

https://brainly.com/question/29460577

#SPJ11

The formation of ions is an essential process in chemistry and is involved in many chemical reactions and compounds.

Atoms are composed of protons, neutrons, and electrons. The number of protons in an atom determines its atomic number and the element it represents. The electrons in an atom occupy different energy levels or shells, and these electrons participate in chemical reactions. The outermost shell of electrons, called the valence shell, is particularly important in chemical reactions because it determines the chemical properties of the atom.

When an atom gains or loses electrons, it becomes charged and is called an ion. The process of gaining or losing electrons is called ionization. When an atom loses one or more electrons, it becomes a positively charged ion called a cation. Cations have a smaller number of electrons than protons and have a net positive charge. For example, when the element sodium (Na) loses one electron, it becomes a sodium ion (Na+).

On the other hand, when an atom gains one or more electrons, it becomes a negatively charged ion called an anion. Anions have a larger number of electrons than protons and have a net negative charge. For example, when the element chlorine (Cl) gains one electron, it becomes a chloride ion (Cl-).

The formation of ions is a fundamental process in many chemical reactions. Ions can combine with each other to form ionic compounds, which are compounds composed of ions held together by electrostatic forces. For example, sodium ions (Na+) and chloride ions (Cl-) can combine to form sodium chloride (NaCl), which is common table salt.

Overall, the formation of ions is an essential process in chemistry and is involved in many chemical reactions and compounds.

Visit to know more about Compound:-

brainly.com/question/26487468

#SPJ11

The pH of the solution after 23.0 mL of 0.25 M HCl have been added to the 35.0 mL of 0.20 M LiOH is 12.74.


1. Calculate the initial moles of LiOH and HCl:
  LiOH: 35.0 mL * 0.20 mol/L = 7.00 mmol
  HCl: 23.0 mL * 0.25 mol/L = 5.75 mmol

2. Determine the limiting reactant and find the moles of unreacted LiOH:
  Since HCl is the limiting reactant, subtract its moles from LiOH moles:
  7.00 mmol - 5.75 mmol = 1.25 mmol of unreacted LiOH

3. Calculate the new concentration of LiOH in the solution:
  Total volume: 35.0 mL + 23.0 mL = 58.0 mL
  New concentration: 1.25 mmol / 58.0 mL = 0.02155 mol/L

4. Calculate the pOH of the solution:
  pOH = -log10(0.02155) = 1.66

5. Find the pH of the solution:
  pH = 14 - pOH = 14 - 1.66 = 12.74

To know more about pH click on below link:

https://brainly.com/question/491373#

#SPJ11

At the given temperature, the equilibrium constant K for the reaction is 0.5625 mol/L.

The balanced chemical equation for the reaction is:

2NH₃(g) ⇌ 3H₂(g) + N₂(g)

The equilibrium expression for the reaction is:

K = [H₂]³[N₂] / [NH₃]²

Given that 5.0 moles of NH₃ were introduced into a 5.0 L reaction chamber, the initial concentration of NH₃ is:

[NH₃]₀ = 5.0 mol / 5.0 L = 1.0 mol/L

At equilibrium, 80.0% of the NH₃ had reacted, which means that 20.0% of NH₃ remains. Therefore, the equilibrium concentration of NH₃ is:

[NH₃] = 0.20 x 1.0 mol/L = 0.2 mol/L

The equilibrium concentrations of H₂ and N₂ can be calculated from the balanced equation:

[H₂] = (3/2) x [NH₃] = 0.3 mol/L

[N₂] = [NH₃] / 2 = 0.1 mol/L

Substituting these values into the equilibrium expression gives:

K = [H₂]³[N₂] / [NH₃]²

K = (0.3 mol/L)³ x (0.1 mol/L) / (0.2 mol/L)²

K = 0.5625 mol/L

Therefore, the equilibrium constant K for the reaction at the given temperature is 0.5625 mol/L.

Find out more on equilibrium constant here: https://brainly.com/question/19340344

#SPJ1

(a) If one of the reaction products was the then unknown neutron, what was the other product is the C -12.

(b) The q-value of this reaction is the 5.9 × 10⁸ J.

The James Chadwick was discovered the neutron during the experiment involving the nuclear reaction in that the beryllium, bombarded with the alpha particles. The equation of the reaction is as :

⁴Be₉  +  ²He₄  ---->  ⁶C₁₂  +  ⁰n₁

(a) If one of the reaction products was the then unknown neutron, what was the other product is the C -12.

(b) The q-value of this reaction is as :

q = mc²

Where,

The m is the mass

The c is the speed of the light.

m = 4.002603 + 2.014102

m = 1.988501

q = 1.988501  × 3 × 10⁸

q = 5.9 × 10⁸ J

To learn more about James Chadwick here

https://brainly.com/question/14559793

#SPJ4

The heat capacity of 28.4 g of water is 118.8976 J/°C. The closest option to this answer is option b) 119 J/°C.

To calculate the heat capacity of 28.4 g of water, we need to use the formula:

Heat capacity = mass x specific heat

where mass is given as 28.4 g and specific heat of water is given as 4.184 J/g.°C.

So, substituting the values in the formula, we get:

Heat capacity = 28.4 g x 4.184 J/g.°C
Heat capacity = 118.8976 J/°C


To calculate the heat capacity of 28.4 g of water, you need to multiply the mass of water (m) by its specific heat (c). The formula for heat capacity (Q) is:

Q = m × c

Given:
m = 28.4 g
c = 4.184 J/g.°C

Substitute the values and perform the calculation:

Q = 28.4 g × 4.184 J/g.°C = 118.8 J/°C

The closest answer among the given options is:

b) 119 J/°C

To learn more about mass of water click here

brainly.com/question/26789700

#SPJ11

The chemical symbol for the ion with an atomic anion and a charge of -1, and electron configuration of 2s22p5 is Cl⁻. The Cl⁻ ion has 18 electrons.

This is because the electron configuration matches that of the element chlorine, which is found in group 7 of the periodic table. The Cl⁻ ion is formed when chlorine gains an extra electron to fill its valence shell and achieve a stable octet configuration.

The Cl⁻ ion has 18 electrons in total, as it has gained one extra electron compared to the neutral chlorine atom. The ion now has a full outer shell with 8 electrons, making it stable and less reactive than its neutral counterpart.

The Cl⁻ ion is commonly found in nature, particularly in the form of sodium chloride (NaCl) or table salt. The Cl⁻ ion is also used in various chemical processes, such as in the production of bleach and other disinfectants. Overall, the Cl⁻ ion plays an important role in many chemical reactions and is essential for maintaining the balance of charges in various compounds.

know more about electron configuration here

https://brainly.com/question/29757010#

#SPJ11

The number of moles of H₂ that can be produced from x grams of Mg is (x / 24.31)

The balanced chemical equation for the reaction between Mg and HCl is,

Mg + 2HCl → MgCl₂ + H₂

This equation shows that 1 mole of Mg reacts with 2 moles of HCl to produce 1 mole of H₂. Therefore, the number of moles of H₂ that can be produced from x grams of Mg can be calculated as follows:

Calculate the number of moles of Mg in x grams:

Number of moles of Mg = mass of Mg / molar mass of Mg

Number of moles of Mg = x / 24.31

Use the mole ratio between Mg and H₂ to calculate the number of moles of H₂ produced:

Number of moles of H₂ = Number of moles of Mg × (1 mole of H₂ / 1 mole of Mg)

Number of moles of H₂ = (x / 24.31) × (1/1)

To know more about moles, here

brainly.com/question/26416088

#SPJ4