Answer:
the answer is A
Explanation:
The base increases Hydroxide ions in a solution e.g NaOH
Answer:
A
Explanation:
what happens to halogens on going top to bottom in their group
they remain as they are and don't change their type
3. Components in a heterogeneous mixture are not in the same phase or the composition of the mixture is
a) uniform
b) transparent
c) uneven
4. Mixing sand and salt in water then passing it through a filter separates out the sand because salt
in water and sand does not.
a) reacts
b) dissolves
c) disappears
Answer:
c
Explanation:
Nevada's annual precipitation averages between 21 and 24 cm. In comparison,Washington state averages between 96 and 97 cm of precipitation per year. Which of these factors has the greatest impact on the difference in precipitation between these two states?
Answer:
Mountain ranges and prevailing winds.
Explanation:
Mountain ranges and prevailing winds are the factors that is responsible for the difference in the precipitation between Nevada and Washington states. The Washington state is located along the coastal region of pacific ocean and having more mountain ranges which causes more rainfall in that region while on the other hand, Nevada state comprise of plateau, basins and far away from the ocean which is the main cause of lower rainfall as compared to Washington state.
11) How many grams are in 2.3 moles of magnesium chloride, MgCl,?
Answer:
218.98 grams
Explanation:
Given that,
No. of moles, n = 2.3
The molar mass of magnesium chloride is 95.211 g/mol.
We need to find the mass of 2.3 moles of magnesium chloride.
We know that,
No. of moles = given mass/molar mass
Let m be the given mass. So,
[tex]m=n\times M\\\\=2.3\times 95.211 \\\\=218.98\ g[/tex]
So, the required mass is equal to 218.98 grams.
Which of the following statements correctly describes the relationship between volume and temperature( moles and pressure of gas are constant)
Answer:
pressure of gas are constant describe the relationship between moles and temprature
The statements correctly describes the relationship between volume and temperature is pressure of gas are constant.
What is pressure ?The force delivered perpendicularly to an object's surface per unit area across which that force is dispersed is known as pressure. In comparison to the surrounding pressure, gauge pressure is the pressure. Pressure is expressed using a variety of units.
The volume of a gas is directly proportional to the number of moles of gas when both temperature and pressure are constant. The pressure of a gas is directly proportional to the number of moles of gas when both temperature and volume are constant.
In layman's words, the volume of a fixed mass of gas is exactly proportional to temperature at constant pressure.
Thus, If the pressure and temperature remain constant, the volume of a gas is directly proportional to the number of moles in the gas.
To learn more about the pressure, follow the link;
https://brainly.com/question/28169433
#SPJ12
Identify three sources of point-source pollution.
Is the formation of CO2(g) from its elements endothermic or exothermic?
Exothermic because the ΔH is negative.
Endothermic because the ΔH is negative.
Endothermic because the ΔH is positive.
Exothermic because the ΔH is positive.
Answer: Exothermic because the ΔH is negative.
Explanation:
The standard enthalpy of formation or standard heat of formation of a compound is the change of enthalpy during the formation of 1 mole of the substance from its constituent elements, with all substances in their standard states.
[tex]C(s)+O_2(g)\rightarrow CO_2(g)[/tex]
Exothermic reactions are those reactions in which heat is released and [tex]\Delta H[/tex] is negative.Endothermic reactions are those reactions in which heat is absorbed and [tex]\Delta H[/tex] is positive.
The reaction is exothermic as the heat is released during the formation of [tex]CO_2[/tex] as heat of formation of [tex]CO_2[/tex] is negative.
A solution with a pOH level of 9.2 would be considered as a basic, acidic, or neutral.
Answer:
It would be Basic.
Explanation:
The higher the number, the more basic it is.
Answer:
its basic solution
Explanation:
b/c the pH value greater than7 base
follow me thank you enjoy younow nice study
How many grams of BaCl2 can be made from 6 moles of Ba?
Answer:
823.98
Explanation:
Since there is only one Ba per atom you simply times 1 by 6 to get the number of mols of Ba per atom, then you times this by the atomic mass of Ba on the periodic table
The amount of heat energy needed to heat 200 g of water from 15 °C to its boiling point, and boil it, is
can you explain it further
A given sample of gas has a volume of 5.20 L at 60.°C and 1.00 atm pressure. Calculate its pressure if the volume is changed to 6.00 L and the temperature to 27°C (assume the amount of gas does not change)
Answer:
0.78 atm
Explanation:
Applying general gas equation
PV/T= P'V'/T'................ Equation 1
Where P = initial pressure, T = Initial temperature, V = Initial Volume, P' = Final pressure, V' = Final Volume, T' = Final Temperature.
make P' the subject of the equation
P' = PVT'/TV'.............. Equation 2
From the question,
Given: P = 1.00 atm, V = 5.20 L, T = 60°C = (273+60) = 333K, V' = 6.00 L, T' = 27°C = (27+273)K = 300 K
Substitute these values into equation 2
P' = (1×5.2×300)/(333×6)
P' = 1560/1998
P' = 0.78 atm.
what is the nature of salt which is formed by the combination of weak acid and strong base And have a great day ❤️
The complete
conversion of 90.0
grams of hydrogen to
ammonia would require
how many moles of
nitrogen gas?
Answer:
15moles
Explanation:
The balanced equation of this reaction is as follows:
N2 + 3H2 → 2NH3
Molar mass of H2 = 2g/mol
mole = mass/molar mass
mole = 90/2
mole = 45moles.
Based on the above balanced equation, 1 mole of nitrogen gas (N2) reacts with 3 moles of hydrogen gas (H2)
Hence, 45moles of hydrogen gas will produce (45 × ⅓) = 15moles of nitrogen gas (N2).
Answer:
Its 14.9 for those who are doing the escape room :)
Explanation:
(Answer ASAP)
In which state(s) of matter could a substance have thermal energy?
A) Only liquids and gases
B) Only liquids and solids
C) Only liquids
D) Liquids, solids, and gases
plz help me.....im new here
Answer:
Fe2S3
Explanation:
Answer:
Option 3rdFe2S3
Explanation:
As, the ionic valency of Iron (Fe) that is + 3 interchanges with the ionic valency of Sulphide that is - 2 to form-
Fe2S3
DESPERATE!!!!! What is the molar mass of an unknown gas that has a density of 2.29 g/L at a pressure of 0.75 atm and a temperature of 88. degrees Celsius?
Answer:
The molar mass of the gas is 90.4g/mol
Explanation:
To solve this question we have to use the equation:
d = PM / RT
Where d is density of the gas = 2.29g/L
P is pressure = 0.75atm
M is molar mass of the gas = ??
R is gas constant = 0.082atmL/molK
T is absolute temperature = 88°C + 273.15 = 361.15K
Solving for M:
dRT / P = M
2.29L*0.082atmL/molK*361.15K / 0.75atm = M
90.4g/mol = M
The molar mass of the gas is 90.4g/mol
when pressure is kept constant then the temperature varies with volume
a. directly
b. inversely
c. none of these
d. both a and b.
Answer:
A
Explanation:
How many grams of Fe2O3 are formed when 51.3 grams of iron, Fe, react completely with oxygen, O2? 4 Fe + 3 O2 --> 2 Fe2O3
The Fe is our limiting reactant here. First, convert the mass of Fe given to moles of Fe by dividing mass by the molar mass:
(51.3 g Fe)/(55.845 g/mol) = 0.9186 mol Fe.
According to the balanced equation, 2 moles of Fe2O3 are produced for every 4 moles of Fe that are consumed. In other words, half as many moles of Fe2O3 will be produced as there are Fe that react:
(0.9186 mol Fe)(2 mol Fe2O3/4 mol Fe) = 0.4593 mol Fe2O3.
Finally, convert the moles of Fe2O3 back to grams by multiplying by the molar mass of Fe2O3:
(0.4593 mol Fe2O3)(159.6882 g/mol) = 73.3 g Fe2O3.
So, 73.3 grams of Fe2O3 are formed.
what are two products that contain ammonia?
If 35.4 liters of hydrogen gas are used, how many liters of nitrogen gas will be needed for the above reaction at STP?
Answer:
ujdbdbfbf fbFbsygtsjysnsgndhngsnsgnafbfa
A sample of hydrogen gas has a volume of 145 mL when measured at 44
degrees C and 1.47 atm. What volume would the hydrogen sample occupy
at STP?
Answer:
[tex]186.01\ \text{mL}[/tex]
Explanation:
[tex]P_1[/tex] = Initial pressure = 1.47 atm
[tex]P_2[/tex] = Final pressure = [tex]10^5\ \text{Pa}[/tex]
[tex]T_1[/tex] = Initial temperature = [tex]44^{\circ}\text{C}[/tex]
[tex]T_2[/tex] = Final temperature = [tex]273.15\ \text{K}[/tex]
[tex]V_1[/tex] = Initial volume = 145 mL
[tex]V_2[/tex] = Final volume
We have the relation
[tex]\dfrac{P_1V_1}{T_1}=\dfrac{P_2V_2}{T_2}\\\Rightarrow V_2=\dfrac{P_1V_1T_2}{T_1P_2}\\\Rightarrow V_2=\dfrac{1.47\times 101325\times 145\times 273.15}{(44+273.15)\times 10^5}\\\Rightarrow V_2=186.01\ \text{mL}[/tex]
Final volume of the sample is [tex]186.01\ \text{mL}[/tex].
HURRY ILL GIVE BRAINLIEST!
Match the cause to its effect.
Answer:
Cattles are giving nutrition supply throughout the year----some animals require nutrient enhancement for health
calves are given colostrum at birth----newborns require antibodies from their mothers
I dont want to write, so you know what the last option is
Explanation:
:) hope this helps
One use of CaCl2 is for salting roads in the winter. How much would the freezing point of water decrease if a 3.23 molal (m) solution of CaCl2 were applied? (Kf = 1.86°C/(mol/kg) for water and i = 3 for CaCl2.)
Answer:
Freezing point of water will decrease to -18.02°C
Explanation:
We start from the formula for freezing point depression, one of the colligative properties.
ΔT = Kf . m . i
ΔT = Freezing T° of pure solvent - Freezing T° of solution
m = molality
Kf = Cyoscopic constant (specific for each solvent)
i = numbers of ions dissolved (Van't Hoff factor)
CaCl₂ → Ca²⁺ + 2Cl⁻ i = 3
We replace each data:
0°C - T° F) = 1.86°C/m . 3.23 m . 3
T°F = - 18.02°C
why would a metal house not be a good idea in Florida or Alaska?
Answer: Maybe, It could be a good and bad idea.
Explanation:
This is beacuse Metal does not absorb and can block sunlight.
What causes the ocean tides to change from high tide to low tide?
A scientist is investigating which type of medicine would dissolve faster, a solid pill or a scoop of powder. Which hypothesis
should the scientist develop given prior knowledge about surface area?
A. Solid pills have more surface area and will take longer to dissolve.
B. Powders have less surface area and will dissolve faster.
C. Solid pills have less surface area and will not dissolve.
D. Powders have more surface area and will dissolve faster.
B.
because a solute with a smaller surface area will dissolve faster
Calculate the [H3O+] of an aqueous solution that is 1.94 x 10-7 Min OH.
Enter your answer in scientific notation. Be sure to answer all parts.
_x 10^_M
whats another name for body cells (not sex cells) that are produced by mitosis?
Answer: Diploid Cells (?)
Explanation:
PLEASEEEE HELPPP??????
Answer:
(B) Grasses to Grasshoppers to Birds to Foxes
Explanation
When 1 mol of Zn reacts with 0.8 mol of HCI, which of the following will be true?
Answer:
Zn is the excess reagent
Explanation: