Answer:
The energy possessed by a body by the virtue of its position is called potential energy.
1 point
Calculate the [H+] in a solution with a pH of 3.71, and identify the solution
as acidic, basic or neutral. *
1.9x10^-4 M ; acidic
5.12x10^-10; acidic
02.4x10^-3 M ; basic
Answer:
I don't have any idea of this question
What is the [OH-] in a solution that has a pH = 9.23? *
O 1.7x10^5
O 8.2x10^-9
1.7x10^--5 M.
Answer: 1.7x10^-5
Explanation:
pH + pOH = 14
14 - pH = pOH
14 - 9.23 = 4.77
pOH =4.77
[OH-] = 10^-pOH
= 10^-4.77
= 1.698243x10^-5
= 1.7x10^-5
HELP!! ASSIGNMENT DUE TODAY! PLEASE HELP!!! I'LL GIVE 21 POINTS!!!!
Respiration occurs in the cytoplasm and _________ of cells.
mitochondria
im not 100% sure but it makes sense
What is the pH of a solution that is 100x more acidic than a solution with a pH of 5?
Answer:3
Explanation:
What type of reaction is this?
Answer:
Decomposition
8. What is involved in building and running the mine
Answer:
Explanation:
minimizing environmental effects.
ensuring public health and safety.
preserving water quality.
establishing new landforms and vegetation.
removing waste and hazardous material.
stabilizing land to protect against erosion.
For a constant waves speed,wavelength,of the wave increases with a(n)______
Answer:
higher frequency
Explanation:
Which of the following solution(s) would be a buffer? Select all that apply.
a. 100.0 mL of a solution that contains 0.100 M benzoic acid and 0.100 M potassium benzoate
b. 100.0 mL of a 0.100 M propanoic acid to which 50.0 mL of 0.100 M sodium hydroxide has been added
c. 100.0 mL of a 0.100 M formic acid solution
d. 100.0 mL of a solution that contains 0.100 M hydrochloric acid and 0.100 M sodium chloride
e. 100.0 mL of a 0.100 M solution of acetic acid in which 0.100 g of sodium acetate is dissolved
As a buffer is defined as the aqueous mixture of a weak acid and its conjugate base. Or a weak base and its conjugate acid. Thus:
a, b and e would be a buffer.The benzoic acid is a weak acid, its conjugate base is the benzoate ion that comes from potassium benzoate. Thus: a is a buffer.
Propanoic acid (weak acid) reacts with a strong base as sodium hydroxide producing its conjugate base (propanoate ion). Thus, b is a buffer.
Formic acid is a weak acid but its conjugate base, formate ion is not present in the solution. Thus, c is not a buffer.
Hydrochloric acid is a strong acid and sodium chloride a salt. Thus, d is not a buffer.
Acetic acid is a weak acid, and its conjugate base, acetate ion (That comes from sodium acetate) is present in the solution. Thus, e is a buffer.
Foods that are basic can be identified by what taste
Explanation:
sweet,sour,salty, savoury
Answer: bitter
Explanation:
List the following elements from increasing electronegativity: boron, magnesium, calcium, chlorine, argon
Answer:
The list of elements from increasing electronegativity: Calcium < magnesium < chlorine < argon < boron.
Explanation:
In the periodic table if you move from left to right there would be an increase in the electronegativity of the elements. If you move from the bottom to the top of the groups in the periodic table the electronegativity increases and if u move to the bottom from down its decreases.
Calcium is in the 2nd group below magnesium so calcium is the least electronegative among given elements then magnesium and then chlorine as it is top of magnesium then argon, as it is right to the chlorine, and boron has the most electronegativity as it is above rest of the elements.
Students place paper clips on a desk and then hold a magnet under the desk. What evidence would BEST show that the
magnetic field was able to pass through the desk?
O A The top of the desk is made of a kind of plastic.
OB. The paper clips move when the magnet is moved under the desk.
OC. The magnet they are using is the largest one in the classroom.
OD. The students were able to pick up these paper clips with a magnet.
Answer:
B
Explanation:
got it right on test
Answer:
Yes the correct answer is B
Explanation:
Have a good day!!!
6. Too much rainwater can cause a slope or hillside to collapse through a process called a
(6 Points)
mudslide
snowslide
o avalanche
storm
Answer:
mudslide
Explanation:
a mass of mud and other earthy material that is falling or has fallen down a hillside or other slope
A 2.25 mol sample of oxygen occupies 1.80 L at 25.0°C. What volume will
it occupy with 3.7 moles?
Answer:
2.96 L
Explanation:
We apply the Ideal Gases Law to determine this:
P . V = n . R . T
Firstly we need to know the pressure for the 2.25 moles
P . 1.80L = 2.25 mol . 0.082 L.atm/mol.K . 298K
(We convert T°C to T°K, 25°C + 273 = 298K)
P = (2.25 mol . 0.082 L.atm/mol.K . 298K) / 1.80L
P = 30.5 atm
So now, we apply the pressure value for the new conditions:
30.5 atm . V = 3.7 mol . 0.082 . 298K
V = (3.7 mol . 0.082 . 298K) / 30.5atm = 2.96 L
Which term describes the following group of planets: Jupiter, Saturn, Uranus, and
Neptune?
Answer:
Gas giants.
Explanation:
Jupiter, Saturn, Uranus, and Neptune are the gas giants of our solar system.
If anyone is taking Integrated Physics and Chemistry (2014) on sos can u pls help me w something !! Thanks
I am so sorry i cant help but good luck
When a strong acid is placed into water, what percentage of hydrogen ions (H+) will dissociate into the solution?
K,Co, is added to a volume of distilled water. Which of the following statements is correct? (1) The freezing and boiling points increase. (2) The freezing and boiling points decrease. (3) The freezing point increases and the boiling point decreases. (4) The freezing point decreases and the boiling point increases
"Reduce, reuse, recycle." Give examples of how one or more of
these ideas can be applied to the issues and practices of hydraulic
fracturing for the acquisition of shale gas.
Answer:
Examples of how the ideas can be applied to the issues and practices of hydraulic fracturing for the acquisition of shale gas are;
Reuse; The produced water in obtained from oil and gas well production are reused for fracking, drilling, and if the water is good enough, it can be used for farming
Reduce; The use of recycled brine and water in drilling and fracking process reduces the application of freshwater in the those processes and reduces pollution of natural water sources
Recycle; Recycling involves creating products from waste. In the hydraulic fracturing process approximately 13 percent of the water produced and the flowback water are recycled to be used more than once thereby reducing the net consumption of freshwater
Explanation:
In hydraulic fracturing, also known informally as fracking, is the drilling method used in oil and gas well development process that makes use of water sand and chemical injection through the well bore to open and widen cracks in the bedrock formations in the areas around the wellbore.
250J of heat was added to a 2 g block of metal. The temperature of the metal was increased by 139.4K. What is the specific heat capacity of the metal?
Use the below equation to calculate specific heat capacity.
Include three decimal places and do not use units in your answer.
cmetal = Q/mΔT
Answer:
0.897
Explanation:
1. Scientists measured the spot size of guppies (small fish) in two different populations. Which
population has more guppies with large spots?
a
They both have the same number of guppies with large spots.
b
The population in Brazil has more guppies with large spots.
С
The population in Venezuela has more guppies with large spots.
d
These bar graphs do not show which population has more guppies with large spots.
Answer: the answer is C
Explanation:
as- The salt left in the evaporating
basin is often a little dirty
suggest what you could do to
get cleaner salt
Answer:
Pour the filtrate into an evaporating basin. Heat the salt solution gently until it starts to decrepitate .keep eye protection on and do not get too close. Turn off the Bunsen burner and let the damp salt dry in the dish
In evaporation particles of water take energy in the form of sunlight from the surrounding and then convert into vapor phase. Therefore heating is the only technique for getting pure salt.
What is evaporation?Evaporation is a physical process in which the water in liquid state converts to gaseous state at the temperature below its boiling point. Evaporation happens before the boiling process.
Evaporation causes cooling effect in the surrounding. During summer when water is kept in earthen pot water cools, this is because of the evaporation process.
Evaporation is affected by temperature. As the temperature increases the rate of evaporation increases and hence in summer there is more evaporation and hence there is lot more water in air.
Pour the filtrate into an evaporating basin. Heat the salt solution gently until it starts to decrepitate .Turn off the Bunsen burner and let the damp salt dry in the dish.
Therefore heating is the only technique for getting pure salt.
To know more about evaporation, here:
https://brainly.com/question/8169606
#SPJ2
Balance the following reaction
HgO → _ Hg +_ 02
Answer:
reeeeeeeeeeeeeeeeeeeee
Explanation:
cancer
How many moles of CO2 gas will be produced in the reaction between baking soda (sodium hydrogen carbonate) and vinegar (acetic acid) if 6 mol of baking soda is reacted in excess vinegar?
Answer:
[tex]6molCO_2[/tex]
Explanation:
Hello there!
In this case, according to the described reaction, we can set up the chemical equation as shown below:
[tex]NaHCO_3+CH_3COOH\rightarrow CO_2+H_2O+CH_3COONa[/tex]
We can evidence the 1:1 mole ratio of baking soda (NaHCO3) to CO2 and therefore the produced moles of latter are calculated as shown below:
[tex]6molNaHCO_3*\frac{1molCO_2}{1molNaHCO_3} \\\\6molCO_2[/tex]
Best regards!
A student measures out 5 mL of calcium chloride solution into a small container and 5 mL of sodium carbonate solution in another small container. The total mass of both chemicals and the containers they are in is 15.5 g. When the student combined the two clear liquids, a gooey, cloudy precipitate formed. What would the total mass of the products and the two containers be after this reaction took place?
Answer:
15.5g
Explanation:
"The total mass of both chemicals and the containers they are in is 15.5 g." After a chemical reaction, by conservation of mass, the total mass of the products and the two containers after reaction is the same at 15.5g.
Answer:
15.5
Explanation:
in a chemical reaction, mass is conserved
so mass after reaction = mass before reaction = 15.5 g
Science there’s a picture
Answer:
D)
Explanation:
seems like the most logical option out of all listed.
Look at each Lewis Dot Diagram for the following elements. How many electrons are needed to fill the outer shell?
The number of electrons are needed to fill the outer shell of the given figures are 4,1 & 3 respectively.
What is Lewis dot structure?Lewis dot structure shows the boding within the molecule by showing the number of electrons and lone pairs present in each atoms present in that molecule.
As we know that bonding in any molecule takes place to complete the octet configuration of outer most shell and get stability.
In the figure (1), 4 electrons are shown in the outer shell then we need 4 electrons to complete the octet.In the figure (2), 7 electrons are shown in the outer shell then we need 1 electron to complete the outer most shell to complete the octet.In the figure (3), 5 electrons are shown in the outer shell then we need 3 electrons to complete the outer most shell to complete the octet configuration.Hence required no. of electrons are 4,1 & 3 respectively.
To know more about Lewis dot structure, visit the below link:
https://brainly.com/question/6605265
PLEASE HELP!!!! Assuming a lacrosse ball weighs 5.5 ounces and is made of mainly rubber which has a mass of 82.2 g/mol, how many particles are in a lacrosse ball?
Can someone help me out with why is the outer core of Earth is important in you’re own words?! A mini paragraph plsss
Answer:
the outer core is important because the outer core is responsible for earth's magnetic field which protects earth from harmful particles that comes from sun and also contains some natural metal like nikle and iron.
is this much paragraph enough comment down below..
hope this helps you ☺️☺️
HF + NaOH ---> NaF + H2O
If you need 1785 g of NaF (sodium Fluoride) how many grams of HF (hydrofluoric acid) do you need?
Answer:
so calculate moles of 1785 g of NaF
this is something = 1785/41.98 =42.52 moles
now one moles of HF is forming one mole of NaF so to get 42.52 moles of NaF we need 42.52 moles of HF
mass = moles × molar mass
mass of HF = 42.52×20.01
mass of HF = 850.82 g
so the conclusion is if you need 1785 g of NaF (sodium Fluoride) you need 850.82 grams of HF (hydrofluoric acid) !!!
I d k it's right or wrong but i tried to solve it, please let me know is it correct or not!!
GAS LAW:
If 2.2 liter of hydrogen are heated from 0 degrees celsius to 95 degrees celsius at the constant pressure what is the new volume?
Answer:
bh yftd5xsdcfvgbhnjm
Explanation: