What is stated in the 1st Law of Motion?

The time taken by the runner to do the work is 1.42 seconds.

Given the data in the question;

Power can be simply referred to as the quantity of energy transferred per unit time.

It is expressed as;

[tex]P = \frac{W}{t}[/tex]

Where W is work done and t is time elapsed.

To determine the time it took the runner to do the work, we substitute our given values into the expression above.

[tex]P = \frac{W}{t} \\\\t = \frac{W}{P} \\\\t = \frac{457J}{321W} \\\\t = \frac{457 kgm^2/s^2}{321 kgm^2/s^3}\\\\t = 1.42s[/tex]

Therefore, the time taken by the runner to do the work is 1.42 seconds.

Learn more about Power and Work: https://brainly.com/question/2962104

Answer:

Radio

Explanation:

X-rays is 10 x 10^-10

radio is 10⁴

Answer:

crush

Explanation:

because the body come into contact

The percent of the silo filled with corn at 10 hours is 90.98%.

Silos are used in order to maximize the grain storage life and preserve them. They are round and tall towers with high capacity for commercial or industrial purposes.  

As the silo is in shape of cylinder, volume of the cylinder is

V = πr²h

where r = d/2 = 19/2 =9.5 ft

and h = 32 ft

Substitute the values, we get the volume of silo,

V = 3.14 x (9.5)² x 32 = 9068.32 ft³

The silo is filled with the constant rate. After 10 hours, in silo, the amount of corn will be gone doubled as compared to that of in 5 hours.

Amount of corn after 10 hours = 4125 x 2 = 8250 ft³

Percentage of silo filled in 10 hours = (amount after 10 hrs / total amount) x 100

Substitute the values, we get

=(8250 /9068.32 ) x 100 %

=90.98 %

Thus, the percent of the silo filled with corn at 10 hours is 90.98%.

Learn more about silo.

https://brainly.com/question/15781978

#SPJ4

It is very important for your measurements that the track is level because unlevel track change the acceleration of an object.

A non-level track leads to bring change in the acceleration of an object which leads to different value of experiment.

So we can conclude that it is important for your measurements that the track is level because unlevel track change the acceleration of an object.

Learn more about track here: https://brainly.com/question/25705738

The track must be level for your measurements because an unlevel track changes the acceleration of an object.

It is defined as the numerical quantity that gives an idea about object length, width, and many more. It can be used to compare two objects.

The non-level track causes changes in an object's acceleration, resulting in various experiment values.

As a result, we can deduce that now the levelness of the track is critical for your measurements, as an uneven track changes an entity's acceleration.

Thus, the track must be level for your measurements because an unlevel track changes the acceleration of an object.

Learn more about the measurements here:

brainly.com/question/4725561

#SPJ4

Answer:

Explanation:

You need to consider the index of refraction.

index of refraction of air: 1.00

index of refraction of water: 1.33

Index of refraction of steel: 2.75681

If the sound wave passed from air into water, it passes from a lower index to a higher index of refraction.

As the wave travels into the more dense medium (higher n), it slows down. Therefore from air to water (lower to higher) it slows down, and from water to steel (n of steel is higher that n of water) therefore it slows down even more.

Answer:

See below ↓

Explanation:

Assuming the motion of a simple pendulum, the time period is given by

The values we have

Solving

The acceleration of the runner in the given time is 2.06m/s².

Given the data in the question;

Since the runner begins from rest,

Acceleration of the runner; [tex]a = \ ?[/tex]

Velocity is the speed at which an object moves in a particular direction.

Acceleration is simply the rate of change of the velocity of a particle or object with respect to time. Now, we can see the relationship from the First Equation of Motion

[tex]v = u + at[/tex]

Where v is final velocity, u is initial velocity, a is acceleration and t is time elapsed.

To determine the acceleration of the runner, we substitute our given values into the equation above.

[tex]v = u + at\\\\13.4m/s = 0 + (a * 6.5s)\\\\13.4m/s = a * 6.5s\\\\a = \frac{13.4m/s}{6.5s}\\ \\a = 2.06m/s^2[/tex]

Therefore, the acceleration of the runner in the given time is 2.06m/s².

Learn more about Equations of Motion: https://brainly.com/question/18486505

Answer:

The energy of a mechanical wave can travel only through matter. The matter through which the wave travels is called the medium (plural, media). The medium in the water wave pictured above is water, a liquid. But the medium of a mechanical wave can be any state of matter, even a solid.

Explanation:

Brainlest pls if can thank you ! i hope its helped

Answer: A

Explanation:

Work is defined as the inner product between the force vector and the distance traveled. Due to the energy-work theorem, the total work done is equal to the change in kinetic energy. But since there is friction, we must also take into account that frictional force. The frictional force opposes the motion of the object, and will take away energy from the object in the form of heat. Therefore, we must subtract the amount of energy done by friction from the total kinetic energy.

For your case, the answer would be A. Although, that is technically incorrect. The car does not gain energy due to friction.

Answer:

No

Explanation:

I dont know please help

Answer:

ultraviolet waves

Explanation:

Our Sun emits light at all the different wavelengths in electromagnetic spectrum, but it is ultraviolet waves that are responsible for causing our sunburns.

Objects with the same charge repel each other, and objects with opposite charges attract each other

According to Coulomb, the electric force for charges at rest has the following properties: Like charges repel each other; unlike charges attract. Thus, two negative charges repel one another, while a positive charge attracts a negative charge. The attraction or repulsion acts along the line between the two charges.

Learn more about charges here: https://brainly.com/question/25922783

The entropy at constant pressure is always greater than that at constant volume and the change in entropy for the two processes is greater for gas B.

According to the second law of thermodynamics, entropy in the isolated system always stays the same or increases.

Since gas does work in isobaric (constant pressure) change processes, the entropy at constant pressure will be greater than that at constant volume.

Thus, for gas A the process is carried out at constant volume while for gas B that is carried out at constant pressure. The change in entropy is greater for gas B.

Learn more about work done by gas at constant pressure here: https://brainly.com/question/11982158

Different patterns we observe in earth’s surface temperature due to angle, distance from the sun, latitude of the place and ocean currents.

The Earth's surface experiences a range of temperature due to different conditions such as angle of the sun, distance from the sun, the latitude of the place, distance from the sea, altitude of the place and ocean currents.

So we can conclude that different patterns we observe in earth’s surface temperature due to angle, distance from the sun, latitude of the place and ocean currents.

Learn more about temperature here: https://brainly.com/question/25677592

Explanation:

i think is per the International System of Units is Kelvin which is represented by the symbol K.

Answer:

I think is o or mavey it could be D

Answer:

Answer:

1. Why does a magnet exert force on another magnet when the two magnets are not in contact? The magnetic field from north to south increases when they're closer together, and when they repel the repelling force increases as well. This is all due to the magnetic field.

Correct me if I'm wrong, Hope this helps

Favor(Brainliest)

#Carryonlearning

Answer:

If the Lego building is shaken side to side, it will withstand up to 60 seconds because front to back will cause the top of the building to collapse.

first we need omega

Hence

[tex]\\ \rm\rightarrowtail \omega=\dfrac{2\pi}{T}=2\pi[/tex]

Now

Total energy:-

[tex]\\ \rm\rightarrowtail \dfrac{1}{2}m\omega ^2A^2[/tex]

[tex]\\ \rm\rightarrowtail \dfrac{1}{2}(1)(2\pi)^2(1)^2[/tex]

[tex]\\ \rm\rightarrowtail \dfrac{1}{2}(4\pi ^2[/tex]

[tex]\\ \rm\rightarrowtail 2\pi ^2[/tex]

[tex]\\ \rm\rightarrowtail 2(3.14)^2[/tex]

[tex]\\ \rm\rightarrowtail 19.72J[/tex]

In the motion of the medium particles in a longitudinal wave, the medium vibrates parallel to the direction of the wave.

A longitudinal wave is a wave that is transversing along the length. When the displacement of medium and travel of wave is the same in that condition wave is known as the longitudinal wave.

It requires some medium to travel. A mechanical and sound wave is an example of a longitudinal wave.

Hence in the motion of the medium particles in a longitudinal wave, the medium vibrates parallel to the direction of the wave.

To learn more about the longitudinal wave refer to the link;

https://brainly.com/question/8497711

Answer:

d the medium vibrates parallel to the direction of the wave.

Explanation:

Answer:

Gases that are very good at absorbing long wave photons of infrared light

Explanation:

Answer:

both

Explanation:

gravity is the same for both

A ball rolls down an inclined plane, starting from rest. if the total time it takes to reach the end of the inclined plane is t, how much time has elapsed when it is halfway down the incline 0.5t

An inclined plane is a straightforward device with a sloping surface that is used to lift heavy objects. When friction is taken into account, the force needed to move an object up an incline is less than the weight being raised. The needed force is closer to the real weight the higher the slope or incline.

The inclined plane is the most basic of all simple machines because nothing needs to move for it to function. In order to save effort, you have to move objects farther when using an inclined plane. A variety of techniques can be used to create an inclined plane. It can be as simple as a log leaning against a tree in the woods or a piece of wood placed on the edge of a stair.

To learn more about the inclined plane please visit

brainly.com/question/14983337

#SPJ2

Answer:

yes

true

Explanation:

because earth is rotation

Answer:

t = 562.44 Newton centimeters

or

t = 5.62 Newton meters

Explanation:

The eqaution for torque is:

t = rFsin(θ)

We are given r, f, and θ.

Fill in what we know.

t = 25*35*sin(40)

t = 562.44

t = 562.44 Newton centimeters

or

t = 5.62 Newton meters

A metal bar is in the xy-plane with one end of the bar at the origin, [tex]\[r = (3.87 \, \text{m}) \mathbf{i} + (3.21 \, \text{m}) \mathbf{j}\][/tex], [tex]\theta\approx 55.16^\circ\][/tex], magnitude of torque is 22.58 Nm.

a) Position Vector r can be calculated as:

Given:

[tex]\(x = 3.87 \, \text{m}\)[/tex]

y = 3.21 m

The position vector r for the point where the force is applied is:

[tex]\[r = (3.87 \, \text{m}) \mathbf{i} + (3.21 \, \text{m}) \mathbf{j}\][/tex]

b) Magnitude of Torque can be calculated as:

Magnitude of r:

[tex]\[|r| = \sqrt{(3.87 \, \text{m})^2 + (3.21 \, \text{m})^2} \approx 5.019 \, \text{m}\][/tex]

Magnitude of F:

[tex]\[|F| = \sqrt{(6.82 \, \text{N})^2 + (-3.24 \, \text{N})^2}\\\\ \approx 7.610 \, \text{N}\][/tex]

Calculate the dot product of r and F:

[tex]\[r \cdot F = (3.87 \, \text{m}) (6.82 \, \text{N}) + (3.21 \, \text{m}) (-3.24 \, \text{N})\\\\ \approx 16.658 \, \text{N} \cdot \text{m}\][/tex]

Calculate the angle [tex]\(\theta\)[/tex] using the dot product and magnitudes:

[tex]\[\cos(\theta) = \frac{r \cdot F}{|r| \cdot |F|} \\\\= \frac{16.658 \, \text{N} \cdot \text{m}}{(5.019 \, \text{m})(7.610 \, \text{N})}\\\\ \approx 0.5526\][/tex]

[tex]\[\theta \approx \cos^{-1}(0.5526)\\\\ \approx 55.16^\circ\][/tex]

Now calculate the magnitude of the torque using the sine of the angle:

[tex]\[|\tau| = |r| \cdot |F| \cdot \sin(\theta)\\\\ = (5.019 \, \text{m}) (7.610 \, \text{N}) \sin(55.16^\circ)\\\\ \approx 22.58 \, \text{N} \cdot \text{m}\][/tex]

c) Direction of Torque:

According to the right-hand rule, the torque points either into or out of the plane formed by r and F. Its direction is perpendicular to that plane. The sign of the angle determines the precise orientation.

In this case, since [tex]\(\theta \approx 55.16^\circ\)[/tex] is positive (counterclockwise rotation), the torque points out of the plane formed by r and F.

Thus, the direction of the torque is outward from the xy-plane.

For more details regarding torque, visit:

https://brainly.com/question/30338175

#SPJ12

Your question seems incomplete, the probable complete question is:

A metal bar is in the xy-plane with one end of the bar at the origin. A force F=(6.82)i+ -3.24j is applied to the bar at the point x=3.87m , y=3.21m .

What is the position vector r for the point where the force is applied?

a Express your answer in terms of the unit vectors i and j .

b What are the magnitude of the torque with respect to the origin produced by F?

c What are direction of the torque with respect to the origin produced by F?

Thermal energy is involved when water changes from one phase to the next. Option A is correct.

Latent heat is the heat needed for the phase change . When the temperature remains constant during melting or boiling, the added energy is employed in the phase change process.

The total number of water particles remains constant when water changes states throughout the water cycle.

When water alterations from one phase to the next, thermal energy is involved. Latent heat is the storage of thermal energy.

Hence, option A is correct.

To learn  more about the latent heat, refer;

https://brainly.com/question/87248

#SPJ2

Answer:

2 kg

Explanation:

K.E. = 1/2 m v^2

81   = 1/2  m (9^2)

1 = 1/2 m

m = 2 kg

The answers to your questions are as listed below

A) The total momentum of the system is :  < - 167, 133, 87 >   kg m/s

B) Velocity of the center of mass of this system : < - 10.44 , 8.31, 5.44 > m/s

C) Total kinetic energy of the system : 5159.5 J  

D) Translational kinetic energy of the system :  1660.84 J

E) kinetic energy relative to the center of mass : 3498.66 J

Given data :

m₁ = 4 kg ,   V₁ = < 10, -5, 15 > m/s

m₂ = 9 kg,   V₂ = < -15, 5, -3 > m/s

m₃ = 3 kg    V₃ = < -24, 36, 18 > m/s.

Total momentum = Σ mv

= < 4*10 + 9*(-15) + 3*(-24), 4*(-5) + 9*5 + 3*36, 4*15 + 9 (-3) + 3*18 >

= < - 167, 133, 87 >   kg m/s

Velocity = < - 167 / 16 , 133/ 16, 87/ 16 >

              =  < - 10.44 , 8.31, 5.44 > m/s

Total Kinetic energy = 1/2 m₁v₁² + 1/2 m₂v₂²  + 1/2 m₃v₃²  --- ( 1 )

where : v² = v₁² + v₂² + v₃²

therefore

Total kinetic energy = 700 + 1165.5 + 3294

                                  = 5159.5 J  

Translational kinetic energy ( Kcm ) = 1/2 ( m₁ + m₂ + m₃ ) * Velocity²

                                                           = 1/2 ( 16 ) * (  - 10.44² + 8.31² + 5.44² )

Hence translational kinetic energy = 1660.84 J

E) The Kinetic energy of the system relative to the center of mass

Krel = Ktotal - Kcm

       = 5159.5 - 1660.84

       = 3498.66 J

Hence we can conclude that the answers to your questions are as listed above.

Learn more about Translational kinetic energy :https://brainly.com/question/25959744