what is the answer for 239.3 x 55

The missing value is approximately 64.12 degrees, which is closest to option D: 21.25 using inverse cos.

The inverse cosine (or arccosine) of both sides of the equation must be taken in order to locate the missing value in the equation cos = 7/18 to the closest tenth. We will then be able to convert the value of to degrees and round it to the closest hundredth using the value of the radian that is produced.

cos θ = 7/18

= arccos(7, 18, 7)

A 1.1181 radian angle

We can use the conversion factor /180 to convert radians to degrees.

θ = 1.1181 × 180/π

64.12 degrees.

As a result, the figure that is lacking is roughly 64.12 degrees, which is closest to choice D: 21.25.

Due to the periodic nature of the cosine function, there are often two solutions when determining the inverse cosine of a value. But, since the problem states that we should round to the closest hundredth, which suggests a single answer, we can disregard the second option in this instance. By reinserting the value we discovered into the original equation and making sure it equals 7/18, we can further confirm that the result is accurate.

Learn more about cos here:

https://brainly.com/question/16498526

#SPJ1

The plant is growing 0.89 feet per month.

To calculate how much a plant grows per month, you need to first convert the measurements into one unit of measurement.

Since the plant is growing 2/3 of a foot every 3/4 of a month,

we can first convert the fractions of a foot and a month into decimal equivalents.

2/3 of a foot is 0.67 feet, and 3/4 of a month is 0.75 months.

We can then calculate the amount of growth per month by dividing the amount of growth per 3/4 of a month by the amount of time that is 3/4 of a month (0.75).

The equation is 0.67 feet / 0.75 months = 0.89 feet per month.

For similar question on fractions.

https://brainly.com/question/78672

#SPJ11

Answer: 40/7 or 5.7

Step-by-step explanation:

using angle bisector theorem we get,

x/5 = 8/7

Upon substituting our given values in above equation, we will get:

x/5 X 5 = 8/7 X 5

x = 40/7 or 5.7

Answer:

3.3

Step-by-step explanation:

Angle bisector theorem: In a triangle, the angle bisector of any angle will divide the opposite side in the ratio of the sides containing the angle.

       [tex]\dfrac{x}{8-x}=\dfrac{5}{7}[/tex]

Cross multiply,

    x *7 = 5*(8 - x)

        7x = 40 - 5x

   7x + 5x = 40

        12x   = 40

             [tex]x = \dfrac{40}{12}\\\\x = 3.3[/tex]

The percent error for Jason's measurement is 7.14%. This means that his measurement was off by 7.14% compared to the actual value.

Percent error is a measure of the difference between an actual value and an estimated or measured value, expressed as a percentage of the actual value. It is used to evaluate the accuracy of measurements or calculations.

To calculate the percent error for Jason's measurement, we first need to find the absolute error, which is the difference between his measurement and the actual value:

Actual value minus measured value equals absolute error.

Absolute error = |14 - 13|

Absolute error = 1 inch

Next, we can use the formula for percent error:

(Absolute error / Actual Value) x 100% equals the percent of error.

Percent error = (1 / 14) x 100%

Percent error = 0.0714 x 100%

Percent error = 7.14%

Therefore, the percent error for Jason's measurement is 7.14%. This means that his measurement was off by 7.14% compared to the actual value.

To know more percent error visit:

https://brainly.com/question/30545034

#SPJ1

The probability of selecting 46 students out of a college population where 65% still need to take another math class is 0.05433 or 5.433%.

The probability of selecting 46 students out of a college population of which 65% still need to take another math class can be calculated using the binomial probability formula. To calculate the probability, the following information is needed:

Using the binomial probability formula, we can calculate the probability of selecting 46 students out of a college population where 65% still need to take another math class as follows:

[tex]P(X=46) = (N!/((N-r)! * r!)) * (p^r) * (1-p)^(N-r)[/tex]

[tex]= (100!/((100-46)! * 46!)) * (0.65^46) * (1-0.65)^(100-46)[/tex]
[tex]= 0.05433[/tex]

Therefore, the probability of selecting 46 students out of a college population where 65% still need to take another math class is 0.05433 or 5.433%.

See more about binomial probability at: https://brainly.com/question/14984348

#SPJ11

the answer is A: 63 square units

Answer:

A (Im not entirely sure if this is correct)

Step-by-step explanation:

how I got this answer is: I found the area of the two triangles which was 12.5 (because the area of a triangle is 1/2(b*h) and the base is 3 and the height is 7 then you divide that by two) and I added them up to get 21. Then you would multiply 3 by two because a triangle is half of a rectangle and you would do b*h for a rectangle area and then multiply that by 7 ot get 42 and you would add taht to 21 to get 63

The college instructor is most concerned with equity standards.

Equity standards are when an instructor adjusts grades to ensure fairness to all students regardless of their individual performances.

This means that if a class as a whole does not do as well as last year, the instructor will alter the distribution of grades so that the overall grades reflect the effort put in by the class.

For example, if the class average is a C, the instructor may raise some grades to a B or even A in order to ensure that the grades are fair to all students in the class.

To know more about Equity standards click on below link:

https://brainly.com/question/11138125#

#SPJ11

The missing side length for the triangle is given as follows:

[tex]x = \frac{16\sqrt{3}}{3}[/tex]

The three trigonometric ratios are the sine, the cosine and the tangent, and they are defined as follows:

For the angle of 60º on the triangle, we have that:

The tangent of 60º is equals to the square root of 3, hence the value of x is obtained as follows:

tan(60º) = 16/x

[tex]\sqrt{3} = \frac{16}{x}[/tex]

[tex]x = \frac{16}{\sqrt{3}} \times \frac{\sqrt{3}}{\sqrt{3}}[/tex]

[tex]x = \frac{16\sqrt{3}}{3}[/tex]

The triangle is given by the image presented at the end of the answer.

More can be learned about trigonometric ratios at brainly.com/question/24349828

#SPJ1

The equation that represents the total area of the pool and deck is: A(x) = 2x² + 24x + 64.

In algebra, a binomial is a polynomial that consists of two terms connected by either an addition or a subtraction operator. A binomial can be written in the form (ax + b) or (ax - b), where "a" and "b" are constants and "x" is a variable.

Binomials are used in a variety of algebraic operations, such as factoring, expanding, and solving equations. They also appear in binomial probability distributions and binomial theorem.

Let's start by drawing a diagram to visualize the problem:

___________      

|                       |    4 ft

|   _________|_________

|   |                   |                    |

|   |                   |                    |

|  |                    |                    |   2x

|  |                    |                    |

|  |_________|_________ |

|                       |    4 ft

|__________ |

      2w

The rectangular pool is twice as wide as it is long, so we can let the length be x, and the width be 2x.

The deck around the pool is 4 feet wide on each side, so the total width of the pool and deck is (2x + 8), and the total length is (x + 8).

Therefore, the total area of the pool and deck can be represented as:

(2x + 8)(x + 8)

Expanding the expression, we get:

2x² + 24x + 64

So the equation that represents the total area of the pool and deck is:

A(x) = 2x² + 24x + 64

where A(x) is the area of the pool and deck, and x is the length of the pool.

To know more about expression visit:

https://brainly.com/question/29492703

#SPJ1

Based on the given information, the scout should choose Player A if they are looking for consistency.

What are range and standard deviation?

Range is the difference between the highest and lowest scores in the set.

Standard deviation measures how spread out the scores are from the mean.

To determine which player is more consistent, we need to look at the variability in their scores. One way to measure variability is to calculate the range and the standard deviation of each player's scores.

The smaller the range, the more consistent the player's scores are.

A smaller standard deviation indicates that the scores are closer together, which means the player is more consistent.

Using the data provided, we can calculate the range and standard deviation for both players:

Player A:

Range = 21 - 0 = 21

Standard deviation = 5.70

Player B:

Range = 48 - 3 = 45

Standard deviation = 10.89

From these calculations, we can see that Player A has a smaller range and a smaller standard deviation, which means that their scores are more consistent than Player B's. Therefore, the scout should choose Player A if they are looking for consistency.

To know more about the range and standard deviations visit:

brainly.com/question/14801621

#SPJ1

The expression 2(10+12) can be rewritten as 44 using the distributive property of multiplication over addition.

The distributive property is a fundamental property of arithmetic that relates multiplication to addition and subtraction. The distributive property of multiplication over addition states that for any numbers a, b, and c

a( b + c ) = ab + ac

Using this property, we can rewrite the expression 2(10+12) as

2( 10 + 12 ) = 2(10) + 2(12)

Here, we have distributed the factor of 2 over the terms inside the parentheses, using the distributive property. This gives us:

2(10+12) = 20 + 24

Simplifying further, we get

2(10+12) = 44

Learn more about distributive property here

brainly.com/question/6276874

#SPJ4

When researching a population where it is impossible or impractical to compile a list of the elements, the sampling technique that is appropriate to use is known as the cluster sampling technique

Cluster sampling is a type of probability sampling that is frequently used when the population is too large to be measured as a whole. The population is divided into smaller, more manageable clusters that are less difficult to study than the entire population.Therefore, cluster sampling is an excellent alternative when the target population cannot be measured because it is too large, too vast, or too hard to reach. In this technique, clusters are chosen by a random process or some other procedure.The final sampling method is achieved by selecting samples from within the clusters, which are frequently chosen using simple random sampling or some other appropriate method. When it comes to cluster sampling, it's important to remember that the clusters chosen must be heterogeneous internally but homogeneous externally.

Learn more about cluster sampling technique:https://brainly.com/question/11003935

#SPJ11

Answer:

Interpolation and extrapolation are two methods used to estimate data points within or beyond a given set of values.Interpolation is the process of estimating a data point within the given range of values, based on the relationship between the known data points. For example, suppose we have the following data points: (1, 3), (2, 5), and (4, 9). If we want to estimate the value of y for x = 3, we can use interpolation to calculate it based on the trend of the data points within the given range. In this case, we can see that the slope of the line between (2, 5) and (4, 9) is the same as the slope of the line between (1, 3) and (2, 5). Therefore, we can estimate the value of y for x = 3 to be 7, using the trend of the known data points.Extrapolation, on the other hand, is the process of estimating a data point beyond the given range of values, based on the trend of the known data points. For example, suppose we have the same data points as before: (1, 3), (2, 5), and (4, 9). If we want to estimate the value of y for x = 5, we can use extrapolation to calculate it based on the trend of the known data points. In this case, we can see that the slope of the line between (2, 5) and (4, 9) is the same as the slope of the line between (1, 3) and (2, 5). Therefore, we can estimate the value of y for x = 5 to be 11, assuming that the trend of the known data points continues beyond the given range.Here is a graph that shows both interpolation and extrapolation:

{graph attached below}

In the graph, the blue dots represent the known data points. The red line represents the trend of the known data points, which can be used for interpolation and extrapolation. The green dot represents an interpolated data point, while the purple dot represents an extrapolated data point.In summary, interpolation and extrapolation are similar in that they both involve estimating data points based on the trend of the known data points. However, they differ in that interpolation estimates data points within the given range of values, while extrapolation estimates data points beyond the given range of values.

hope this helps!

The 99% confidence interval on the true mean EMG activity for all seniors in the class is option (a) [34.7296, 36.8704]

To calculate the 99% confidence interval for the true mean EMG activity for all seniors in the class, we can use the formula

CI = X ± Zα/2 (σ/√n)

where

X = sample mean = 35.8

Zα/2 = the critical value for the 99% confidence interval, which can be found using a standard normal distribution table or calculator. For a two-tailed test, α/2 = 0.005, so Zα/2 = 2.576.

σ = sample standard deviation = 2.5

n = sample size = 40

Substituting these values into the formula, we get

CI = 35.8 ± 2.576 (2.5/√40) = [34.7296, 36.8704].

Therefore, the correct option is (a) [34.7296, 36.8704]

Learn more about confidence interval here

brainly.com/question/24131141

#SPJ4

Answer: 1287

Step-by-step explanation:

0.4

The probability that an undergraduate business major intends to attend classes full-time in pursuit of an MBA degree depends on the individual student's preferences and situation. Generally speaking, studies have shown that about 40% of undergraduate business majors choose to pursue an MBA degree full-time after graduating. Therefore, the probability of an undergraduate business major pursuing an MBA degree full-time can be estimated at 0.4.

Learn more about probability.

brainly.com/question/30034780

#SPJ11

The answer choice that is the most appropriate is B. A one-sample z-interval for estimating a population proportion

This is the most appropriate method because you are trying to estimate the proportion of all registered voters who have a favorable impression of Candidate A based on the sample data.

A one-sample z-interval is used when you want to estimate a population proportion using a sample proportion.

To calculate the one-sample z-interval for estimating a population proportion, you can use the following formula:

Confidence Interval = p ± Z * sqrt((p * (1 - p)) / n)

where:

Using this method, you will calculate a confidence interval that estimates the true proportion of registered voters who have a favorable impression of Candidate A, based on the sample data.

This is the most appropriate method because it focuses on estimating a single population proportion and incorporates the sample data and sample size into the calculation.

Read more about random samples here:

https://brainly.com/question/29444380

#SPJ1

Probability of

=0.0403.

The probability that exactly two of the 14 students selected with replacement will wear wrist watches is 3/30 * 2/29 * 27/28 * 26/27 = 0.0437.

The probability that exactly two of the 14 students selected without replacement will wear wrist watches is 3/30 * 2/29 * 26/28 * 25/27 = 0.0403.

Learn more about probability

brainly.com/question/28336521

#SPJ11

The coordinates for the dilated triangle is obtained as A'(-1, 8), B'(-7, 6), and C'(-7, -4).

What is dilation?

Resizing an item uses a transition called dilation. Dilation is used to enlarge or contract the items. The result of this transformation is an image with the same shape as the original. However, there is a variation in the shape's size. The initial shape should be stretched or contracted during a dilatation.

The coordinates point of the triangle is given as -

A (-1,6)

B (-4,5)

C (-4,0)

To dilate triangle ABC by a scale factor of 2 about the point (-1, 4), we can follow these steps -

Translate the triangle so that the center of dilation is at the origin.

We can do this by subtracting (-1, 4) from each vertex -

A' = (-1, 6) - (-1, 4) = (0, 2)

B' = (-4, 5) - (-1, 4) = (-3, 1)

C' = (-4, 0) - (-1, 4) = (-3, -4)

Dilate the translated triangle by multiplying the coordinates of each vertex by the scale factor of 2 -

A'' = 2(0, 2) = (0, 4)

B'' = 2(-3, 1) = (-6, 2)

C'' = 2(-3, -4) = (-6, -8)

Translate the dilated triangle back to its original position by adding (-1, 4) to each vertex -

A'B'C' = A'' + (-1, 4) = (-1, 8)

B'' + (-1, 4) = (-7, 6)

C'' + (-1, 4) = (-7, -4)

Therefore, the coordinates of the dilated triangle A'B'C' are (-1, 8), (-7, 6), and (-7, -4).

To learn more about dilation from the given link

https://brainly.com/question/3457976

#SPJ1

The probability of rolling a sum of 7 or less on two dice is 11/36. This can be expressed as a decimal number rounded to four decimal places as 0.3056.

We need to look at the possibilities when rolling two dice. Each die has six sides, which means the total number of outcomes when rolling two dice is 36. There are 11 combinations of two dice that produce a sum of 7 or less: (1,1), (1,2), (1,3), (1,4), (1,5), (1,6), (2,1), (2,2), (2,3), (3,1), (3,2). So, 11/36 can be simplified to 1/4, or 0.3056.

To understand this in a more visual way, you can draw a table and use colored dots to indicate the possible combinations. This will show you that out of 36 total possibilities, 11 of them produce a sum of 7 or less.

In summary, the probability of rolling a sum of 7 or less on two dice is 11/36, which can be expressed as a decimal number rounded to four decimal places as 0.3056.

For more such questions on Probability.

https://brainly.com/question/27279592#

#SPJ11

Changing the value of "a" in the quadratic function affects the vertical stretch or compression and the direction of the opening of the parabola, compared to the graph of the quadratic parent function.

What is function?

A relationship or expression involving one or more variables

The function g(x) = 6x^2 is a quadratic parent function, which means it is the simplest form of a quadratic function.

When we change the value of "a" in the general form of a quadratic function:

f(x) = ax^2 + bx + c

we change the shape of the graph of the function. Specifically, changing the value of "a" stretches or compresses the graph vertically, and changes the direction of the opening of the parabola.

If "a" is positive, the parabola opens upwards, and if "a" is negative, the parabola opens downwards. The larger the absolute value of "a", the more stretched or compressed the parabola becomes.

In the case of g(x) = 6x^2, "a" is positive and equal to 6, which means the graph is stretched vertically by a factor of 6 compared to the parent function. The parabola opens upwards and is narrower than the parent function.

If we were to change the value of "a" to a different positive value, for example "a" = 3, the graph would still open upwards but would be less stretched than g(x) = 6x^2. On the other hand, if we were to make "a" negative, for example "a" = -6, the graph would open downwards, and be a reflection of the graph of g(x) = 6x^2 about the x-axis.

In summary, changing the value of "a" in the quadratic function affects the vertical stretch or compression and the direction of the opening of the parabola, compared to the graph of the quadratic parent function.

To learn more about Function, click on the link:

https://brainly.com/question/4379163

#SPJ1

The mean absolute deviation (MAD) of the given set of data is 3.875.

To calculate the mean absolute deviation, we first need to find the mean of the data set by adding up all the numbers and dividing by the total number of values:

Mean = (12 + 10 + 12 + 6 + 8 + 4 + 2 + 12) / 8

Mean = 8

Next, we find the absolute deviation of each number from the mean. To do this, we subtract the mean from each number and take the absolute value:

|12 - 8| = 4

|10 - 8| = 2

|12 - 8| = 4

|6 - 8| = 2

|8 - 8| = 0

|4 - 8| = 4

|2 - 8| = 6

|12 - 8| = 4

Then, we find the mean of the absolute deviations:

Mean absolute deviation = (4 + 2 + 4 + 2 + 0 + 4 + 6 + 4) / 8

Mean absolute deviation = 26 / 8

Mean absolute deviation = 3.875

Therefore, the mean absolute deviation of the given set of data is 3.875.

Learn more about Mean absolute deviation:

https://brainly.com/question/447169
#SPJ4

Complete Question:

what is the mean absolute deviation of the following set of data 12 10 12 6 8 4 2 12.

The domain for n in the arithmetic sequence is the one in the first option:

all integers where n ≥1

We have a arithmetic sequence defined by the general formula:

aₙ  = 4 - 3*(n - 1)

And we want to find the domain for the possible values of n that we can use in that formula.

Remember that the terms of a sequence are defined as:

a₁, a₂, a₃,...

So the values of n are positive whole numbers, in this case the first one is n = 1.

a₁ = 4 + 3*(1 - 1)

a₁ = 4

And then we can keep using any positive integer, then the correct option is:

all integers where n ≥1

Learn more about sequences at:

https://brainly.com/question/6561461

#SPJ1

The value of angle CI is equal to 40 for the triangle.

What is geometry?

Geometry is one of the oldest branches of mathematics, along with arithmetic. It is concerned with spatial properties such as figure distance, shape, size, and relative position.

Mathematical symbols can be used to represent numbers (constants), variables, operations, functions, brackets, punctuation, and grouping. They can also denote the logical syntax's operation order and other properties.

Given that I is the incenter of the triangle AI = 3x+7, BI = 5x-11, and CI = 52-2x.

The value of BI will be calculated as,

AI = BI

3x + 7 = 5x - 11

2x = 18

x = 6

Now for the value of angle CI:

CI = 52 - 2x

CI = 52 - 2 x 6

CI = 52 - 12

CI = 40

Therefore, the value of angle CI is equal to 40 for the triangle.

To know more about geometry follow:

brainly.com/question/29006565

#SPJ1

The required sides of kite are √61, √61, √221 and √221 units.

According to the Pythagoras theorem, the square of the hypotenuse in a right-angled triangle equals the total of the squares of the other two sides. The formula for this theorem is c² = a² + b², where c is the hypotenuse and a and b are the triangle's two sides. Pythagoras theory triangles are another name for these triangles.

In ΔAOD

AD = [tex]\sqrt{5^2+6^2} = \sqrt{61}[/tex] units

In ΔAOB

AB = [tex]\sqrt{5^2+6^2} = \sqrt{61}[/tex] units

In ΔBOC

BC = [tex]\sqrt{5^2+14^2} = \sqrt{221}[/tex] units

In ΔDOC

DC = [tex]\sqrt{5^2+14^2} = \sqrt{221}[/tex] units

Thus, required sides of kite are √61, √61, √221 and √221 units.

To know more about Rhombus visit:

brainly.com/question/27870968

#SPJ1

Answer:

1440000

Step-by-step explanation:

Since for every mile, there are 12 people, we have 120000 miles. If we multiply 12 by 120000, we get 1440000.

Answer:

$510,000

Step-by-step explanation:

Since we are rounding to the nearest thousand, we can use the hundreds place to determine the if we need to round down or up.

Remember, 4 or less, round down. 5 or more, round up.

Since the hundreds digit is 4, we do not need to round.

We only need to change the rest of the digits to 0.

So, our answer would be $510,000.

The result of 6x6x6x6x6x6x6 divided by 6x6x6x6x6x6 in index form is 6.

In index form, 6x6x6x6x6x6x6 divided by 6x6x6x6x6x6 can be written as:

(6⁷) / (6⁶).To divide two exponential expressions with the same base (in this case, 6), we can subtract the exponents:

6⁽⁷⁻⁶⁾ = 6¹ = 6.

Index form, also known as exponential form, is a way of writing numbers or expressions using exponents. In index form, a number is expressed as a base raised to a power or exponent.

Find out more about exponent

brainly.com/question/30066987

#SPJ4

Answer:  The area of the smaller circle is [tex]65.6cm^{2}[/tex].

Step-by-step explanation:

A = [tex]\pi r^{2}[/tex], r is the radius.

1. Find out the diameter of the small circle.

[tex]\frac{1}{3}(27)= 9[/tex]

2) Find out the radius, r.

[tex]radius = \frac{diameter}{2} =\frac{9}{2} =4.5[/tex]

3) We plugin r = 4.5 into the formula to solve the area of the smaller circle.

[tex]A=\pi r^{2}=\pi (4.5)^{2} =65.6cm^{2}[/tex]