what is the answer?!​

Answer:

Technician A

Explanation:

Technician A is correct because, the hand force required is not supposed and even should not exceed 80 lb.

On the other hand, the foot force limit is even higher at 100 lb. Thus, the required foot force break should not exceed 100 lb. We are given 80 lb in the question, which is quite less than 100 lb. It could exceed 80, but must not exceed 100. Thus only Technician A is correct among them both.

Answer:

7) Oven, toaster. 8) Fire, gas stove. 9) Television? No.. umm.. generator, yeah a generator 10) photosynthesis

Explanation:

Answer:

S=5.83...

Explanation:

s=d/t

Speed=distance/time

s=35/10

s=5.83...

Answer:

the path the object follows is called its trajectory so A. trajectory

Answer:

The correct option is;

c. 12.8 cm

Explanation:

The given parameters are;

The length of each spring = 12 m  = 0.12 m

Given that the masses and the springs are vertically oriented, we have;

The mass on the first spring = 3 × 6.4 = 19.2 kg

The weight on the first spring = 19.2 kg × 9.81 m/s² = 188.352 N

The extension of the first spring = 188.352 N/7,800 N/m ≈ 0.02415 m

The mass on the second spring = 2 × 6.4 = 12.8 kg

The weight on the second spring = 12.8 kg × 9.81 m/s² = 125.568 N

The extension of the second spring = 125.568 N/7,800 N/m ≈ 0.016098 m

The mass on the third spring = 1 × 6.4 = 6.4 kg

The weight on the third spring = 6.4 kg × 9.81 m/s² = 62.784 N

The extension of the third (bottom) spring = 62.784 N/7,800 N/m ≈ 0.00805 m

The total length of the bottom spring = Original length of the bottom spring + Extension of the bottom spring

The total length of the bottom spring ≈ 0.12 m + 0.00805 m = 0.12805 m

The total length of the bottom spring ≈ 0.12805 m ≈ 12.81 cm

The bottom spring will be approximately 12.81 cm long.

Answer:

[tex]average power = 416.67 \: W

[/tex]

Explanation:

[tex]are \: you \: sure \: this \: is \: a \: man \: or \: robot?......haha. \\ the \: average \: power \: is \: given \: by : \\ p_{(a.v)} = \frac{w}{t} \: but \: work \: or \: energy \: expanded \: is \: given \: by : \\ w = \: fs = mgs \: \: therfore, \: p_{(a.v)} = \frac{mgs}{t} \\ note \: the \: followng : \\ p_{(a.v)} = average \: power, \\ w = work \: done \: or \: energy \: expanded, \\ f = force \: due \: to \: gravity \: = weight = mg, \\ s = distance = height = 2m \times 25 \: lifts, \: m = mass = 50kg, \\ \: g \: = \: acceleration \: due \: to \: gavity = 10 {m(s)}^{ - 2} and \: t = time = 60s.

\\ so \: what \: now, ok \: lets \: find \: p_{(a.v)} . \\ p_{(a.v)} = \frac{mgs}{t}= \frac{50 \times 10 \times 50}{60} = 416.66666667 \: watts.[/tex]

Answer:

A is the answer because if you multiply 8 and 2 the period of wave frequency is 16Hz long.

Explanation:

Answer:

B 0.125 its a simple conversion

Answer:

The net external force on the apple is 9.18 N and the direction of net force is 82.6°.

Explanation:

Given that,

Force of gravity = 9.11 N

Force of wind = 1.18 N

We need to calculate the net external force on the apple

Using formula of net force

[tex]F'=\sqrt{(9.11)^2+(1.18)^2+2\times1.18\times9.11\cos90}[/tex]

[tex]F'=9.18\ N[/tex]

We need to calculate the direction of net force

Using formula of direction

[tex]\theta=\tan^{-1}(\dfrac{9.11}{1.18})[/tex]

[tex]\theta=82.6^{\circ}[/tex]

Hence, The net external force on the apple is 9.18 N and the direction of net force is 82.6°.

The magnitude of the net external force on the apple is 9.19 N and the direction of the net external force is 82.6⁰.

The given parameters;

The magnitude of the net external force on the apple is calculated as follows;

[tex]F= \sqrt{F_y^2 + F_x^2} \\\\F= \sqrt{9.11^2 + 1.18^2} \\\\F = 9.19 \ N[/tex]

The direction of the net external force on the apple is calculated as follows;

[tex]\theta = tan^{-1}(\frac{F_y}{F_x} )\\\\\theta = tan^{-1}(\frac{9.11}{1.18} )\\\\\theta = 82.6 \ ^0[/tex]

Thus, the magnitude of the net external force on the apple is 9.19 N and the direction of the net external force is 82.6⁰.

Learn more here:https://brainly.com/question/816252

¡Hellow!

For this problem, lets recabe information:

v (Velocity) = 10 m/s

a (Aceleration) = 1 m/s²

t (Time) = 1/4 min = 25 s

d (Distance) = ?

v' (Final velocity) = ?

First, for calculate distance, lets applicate formula:

                                        [tex]\boxed{\boxed{\text{d = Vo * t + (a * t}^{2})\text{ * 0,5} } }[/tex]

Lets replace according we information and let's resolve it:

d = 10 m/s * 25 s + (1 m/s² * (25 s)²) * 0,5

d = 250 m + (625 m) * 0,5

d = 2,5 m + 312,5 m

d = 314 meters.

Now, for calculate final speed, lets applicate formula:

                                                 [tex]\boxed{\boxed{\text{v' = v + a * t} } }[/tex]

Lets replace according we information and let's resolve it:

v' = 10 m/s + 1 m/s² * 25 s

v' = 10 m/s + 25 m/s

v' = 35 m/s

¿Good Luck?

Att: That guy who use the "ñ".

Answer:

(a). The change in electric potential energy is 8.3 μJ.

(b).  The second particle moves away from the source charge.

Explanation:

Given that,

Charge of first particle = -8.8 nC

Charge of second particle = -4.3 nC

Distance = 0.11 m

They are released and the second particle moves 0.030 m,

(a). We need to calculate the change in electric potential energy

Using formula of potential energy

[tex]U=\dfrac{Kq_{1}q_{2}}{d}[/tex]

Change in potential energy

[tex]\Delta U=\dfrac{kq_{1}q_{2}}{d_{2}}-\dfrac{Kq_{1}q_{2}}{d_{1}}[/tex]

Put the value into the formula

[tex]U=\dfrac{9\times10^{9}\times(8.8\times10^{-9}\times4.3\times10^{-9})}{0.030}-\dfrac{9\times10^{9}\times(8.8\times10^{-9}\times4.3\times10^{-9})}{0.11}[/tex]

[tex]\Delta U=0.000008256\ J[/tex]

[tex]\Delta U=8.3\ \mu J[/tex]

(B). We need to find the second particle move toward or away from the source charge

We know that,

Both charges are same, so the second particle will be repul from the source charge.

So, The second particle moves away from the source charge.

Hence, (a). The change in electric potential energy is 8.3 μJ.

(b).  The second particle moves away from the source charge.

Answer:

weight of truck in kg, height of person in meter m, amount of water in kiloliter kl, length of eyelash in mm

Answer:

Same as loop #2

Explanation:

The magnitude of emf in loop #1 is the same as that of loop #2

Answer:

0 N

Explanation:

Net force = mass × acceleration

∑F = ma

The velocity is constant, so the acceleration is 0.  Therefore, the net force is 0.

The net force acting on the bike is 0 N.

Net force is the sum of all forces acting on an object. The net force can be calculated using Newton's second law, which states that F = ma, where: F is the net force. m is the mass of the object. a is acceleration.

The velocity is constant, so the acceleration is 0.  Therefore, the net force is 0 N.

To know more about Net force here

https://brainly.com/question/13408780

#SPJ2

Answer:

A. 0 m.

B. 6 m.

Explanation:

Displacement is final position to initial position in the shortest length possible, if you end at your initial position then your displacement is basically 0.

Since the book traveled along the perimeter of a table of 1m and 2m then its perimeter is a total of 6m, which is basically how far the book traveled.

Answer:

Its a D.

Explanation:

Answer:

Explanation:

The work done by an object can be found by using the formula

From the question

force = 5N

distance = 20m

We have

workdone = 5 × 20

We have the final answer as

Hope this helps you

Answer:

Mass = 1450kg

Explanation:

P = M * V (where p is momentum, m is mass and v is velocity)

29000 = 20 * M

M = 29000 / 20

M= 1450 kg

Cycling

Walking

Shopping

Exercising

Dancing

Playing physical games

Sport

Cooking

Working around the house

Gardening

Hope this helps:D

Answer: Explanation:

If the net force on an object is doubled, its acceleration will double If the mass of an object is doubled, the acceleration will be halved .

In Newton’s second law, if the net force acting on object doubles then either acceleration is double or mass is double.

A force is an effect that can alter an object's motion according to physics. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.

According to Newtons second law force is product of mass and acceleration.

F = ma

In Newton’s second law, if the net force acting on object doubles then either acceleration is double or mass is double.

To learn more about force refer to the link:

brainly.com/question/13191643

#SPJ2

Answer:

The object starts away from the origin and then moves toward the origin at a constant velocity. Next, it stops for one second. Finally, it moves away from the origin at a greater constant velocity.

Explanation:

Sample Response: The object starts away from the origin and then moves toward the origin at a constant velocity. Next, it stops for one second. Finally, it moves away from the origin at a greater constant velocity.

What did you include in your description? Check all that apply.

The object starts away from the origin.

The object moves toward the origin at a constant velocity.

The object stops for one second.

The object moves away from the origin at a greater constant velocity.

The circled vectors represent speed.

The is the ratio of distance traveled to time of motion. Speed is a scalar quantity because it has only only magnitude.

From the map, as the magnitude (size) of the green arrows changes, the size of the circled arrows changes accordingly.

Also, the direction of the circled arrow was constant for both top and bottom arrows.

Velocity changes with direction BUT speed does not change with direction, and has a complete meaning with only magnitude.

Thus, the circled vectors represent speed.

Learn more about speed here: https://brainly.com/question/6504879

Explanation:

the weight of the people inside the bus

Answer:

Explanation:

16=m(2)*2

16=m4

m=16÷4

m=4

Answer:

To make the  lifting more efficient. It lets there be less taxing and saves a ton of energy!!

Explanation:

Answer:

1) The forces acting on the puck are the forces applied by the two players in their bid to push the puck in the opposite direction

2) The puck does not move because the forces applied by the two players are equal and opposite

3) A player can get the puck to move in the direction they want by increasing the force acting in the direction they want the puck to move

Explanation:

Answer:

0.5

Explanation:

D = M / V

You divide 300g by 600ml and you get 0.5

(✿◠‿◠)

la respuesta es

0.5

espero que te sirva

:-)

Answer:

8 x 10^-12

Explanation:

Radius = 4 x 10^-3nm = 4 x 10^-12 m

by the formula,

                        diameter = 2 x radius

                        diameter = 2 x (4 x 10^-12)

                        diameter = 8 x 10^-12 m

Answer:

The velocity is not uniform

Explanation:

The velocity is not uniform, since the vehicle is increasing its speed to a value of 4 [m/s] in a time of 4 [s], that is, the vehicle is accelerating to increase its velocity, so when there is acceleration the velocity can not be constant or uniform.

Vf = Vo +(a*t)

where:

Vf = final velocity = 4 [m/s]

Vo = initial velocity = 0

a = acceleration [m/s²]

t = time = 4 [s]

a = (4 - 0)/4

a = 1 [m/s²]