What is the area of a rhombus with diagonals that measure 7 inches and 5 inches? 35 in2 8.75 in2 12 in2 17.5 in2

The value of c2 in the notation of the text is 4mk. The units of c2 are Ns/m.
To find the position of the mass after t seconds, we need to solve the differential equation:
m d^2x/dt^2 + c dx/dt + kx = 0
where m is the mass of the spring, c is the damping constant, k is the spring constant, and x is the position of the mass.
We can write the solution to this equation in the general form:
x(t) = G1eat cos( Bt) + ce" sin(St)
where a and B are constants that depend on the initial conditions of the system, and G1 and c are constants determined by those initial conditions.
To find the constants G1 and c, we need to use the initial conditions given in the problem: the spring is stretched 0.5 meters beyond its natural length and then released with zero velocity. This means that x(0) = 0.5 and dx/dt(0) = 0.

Substituting these initial conditions into the general solution, we get:
x(t) = G1e^(-ct/2m) cos( ωt) + c e^(-ct/2m) sin( ωt)
where ω = sqrt(k/m - c^2/4m^2) is the angular frequency of the motion.
To find the constants G1 and c, we differentiate x(t) with respect to time and use the initial condition dx/dt(0) = 0:
dx/dt = -G1c/2m e^(-ct/2m) sin( ωt) + c e^(-ct/2m) cos( ωt)
dx/dt(0) = 0 = c
Therefore, c = 0.
To find G1, we use the initial condition x(0) = 0.5:
x(0) = G1 cos(0) + 0 = G1 = 0.5
Therefore, the position of the mass after t seconds is:
x(t) = 0.5e^(-ct/2m) cos( ωt)
where c = 0 and ω = sqrt(k/m).
Plugging in the given values, we get:
x(t) = 0.5e^(-0t/2*7) cos( sqrt(40/7)t) = 0.5cos(2.226t)
So the position of the mass after t seconds is 0.5cos(2.226t) meters.

To learn more about Value & Position of Spring : https://brainly.com/question/16669465

#SPJ11

The root test is inconclusive for the series Σ 1/n8n.

To determine the convergence or divergence of the series Σ 1/n8n using the root test, we need to calculate the limit as n approaches infinity of the nth root of the absolute value of the nth term. In this case, the nth term is 1/n8n.

Calculating the limit, we have lim n→∞ (n√|1/n8n|).

Simplifying the expression inside the absolute value, we get 1/n^8n = 1/n^(8n) = 1/n^(8n) = 1/(nⁿ⁸) = 1/(n⁸ⁿ).

Taking the nth root of the absolute value, we have

n√|1/n⁸ⁿ| = n√(1/(n⁸ⁿ)).

As n approaches infinity, the expression (1/(n^8n)) approaches zero because the denominator, n⁸ⁿ, grows much faster than the numerator, 1. Therefore, the nth root of the absolute value approaches 1.

Since the limit is equal to 1, the root test is inconclusive. The root test does not provide sufficient information to determine whether the series

Σ 1/n8n is convergent or divergent.

Learn more about Series:

brainly.com/question/12707471

#SPJ11

Answer:11/15

Step-by-step explanation:

to be a red chip 4/15, to not be red (the complement) is 1-4/15=11/1

To use the upper and lower sums to approximate the area of a region, we need to first divide the region into subintervals of equal width. Let's say we have n subintervals.

The lower sum is the sum of the areas of rectangles whose heights are the minimum value of y in each subinterval. The upper sum is the sum of the areas of rectangles whose heights are the maximum value of y in each subinterval.

To approximate the area using the lower sum, we would calculate:

lower sum = (width of subinterval) x (minimum y value in subinterval) for each subinterval
area = sum of lower sums for all subintervals

To approximate the area using the upper sum, we would calculate:

upper sum = (width of subinterval) x (maximum y value in subinterval) for each subinterval
area = sum of upper sums for all subintervals

It's important to note that as the number of subintervals increases, the accuracy of our approximation improves. However, it also increases the amount of calculation needed. Therefore, we must find a balance between accuracy and efficiency in our calculations.

To learn more about Intervals, visit:

https://brainly.com/question/17034620

#SPJ11

An inequality that represents the situation is s > 140.

Let's use "s" to represent the number of milligrams of sodium in a serving.

Since a serving of food does not qualify as low sodium if it contains more than 140 milligrams of sodium, we can write the inequality:

s > 140

This inequality reads "s is greater than 140", indicating that any value of "s" that is greater than 140 milligrams of sodium per serving does not qualify as low sodium.

To graph this inequality, we can represent "s" on the vertical axis and mark the value of 140 with a dashed line.

Since the inequality is greater than 140, we shade the area above the line to represent all the possible values of "s" that do not qualify as low sodium.

The resulting graph would look like given in the attached image.

To learn more about inequality;

brainly.com/question/28823603

#SPJ1

The complete question:

Write and graph an inequality that represents the number of sodium 's' in a serving that does not qualify as low sodium.

For a food to be labeled low sodium, there must be no more than 140 milligrams of sodium per serving.

The area of the equilateral triangle that has an apothem of 14cm and a side length of 48.5 cm is 1019.25 square centimeters.

An equilateral triangle is a triangle in which all sides are equal and all angles are 60 degrees. The apothem of an equilateral triangle is the perpendicular distance from the center of the triangle to one of its sides.

To find the area of the equilateral triangle, we can use the formula:

Area = (1/2) x apothem x perimeter

where perimeter is the sum of the lengths of all three sides of the triangle.

In this case, the apothem is given as 14 cm and the side length is given as 48.5 cm. Since the triangle is equilateral, all three sides are equal to 48.5 cm.

Therefore, the perimeter of the triangle is:

Perimeter = 3 x 48.5 cm = 145.5 cm

Now we can substitute the values of the apothem and perimeter into the formula for the area:

Area = (1/2) x 14 cm x 145.5 cm = 1019.25 cm²

To learn more about triangle click on,

https://brainly.com/question/27203375

#SPJ1

The number of possible outcomes is 10 times with five heads and no two heads adjacent to each other is 6.

To determine the number of possible outcomes of tossing a coin 10 times that contain five heads with no two heads adjacent to each other, we can follow these steps:

1. Since there are 10 tosses, we need to place 5 heads (H) and 5 tails (T) in a sequence.
2. To ensure no two heads are adjacent, we must place each head in between tails, which creates 6 possible positions for the heads (i.e., _T_T_T_T_T_).
3. Now, we need to distribute 5 heads into these 6 positions. This is a combination problem, so we'll use the formula for combinations:

C(n, k) = n! / (k! * (n-k)!),

where n = the number of available positions, k = the number of heads, and ! denotes factorial.
4. Applying the formula:

C(6, 5) = 6! / (5! * (6-5)!)

= 6! / (5! * 1!)

= 720 / (120 * 1)

= 6.

So, the number of possible outcomes of tossing a coin 10 times with five heads and no two heads adjacent to each other is 6.

To know more about the Number of Possible Outcomes, visit:

https://brainly.com/question/31705950

#SPJ11

Triangle angles must add up to 180º then, The value of x=20

In a Kite triangle, there are three angles. These angles are created by the triangle's two sides coming together at the triangle's vertex. Three inner angles added together equal 180 degrees.  Both internal and external angles are present in a triangle.

In a triangle, there are three interior angles. When the sides of a triangle are stretched to infinity, exterior angles are created. As a result, between one side of a triangle and the extended side, external angles are created outside of a triangle.

Here triangle angles must add up to 180º:

2x+10+2x+90=180

4x+100=180

4x=80

x=20

Learn more about Kite Triangle visit: brainly.com/question/26870235

#SPJ4

Correct Question:

Figure ABCD is a kite. Find the value of x.

There is no significant difference between the mean tensile strength of the silicone rubber at different curing temperatures. we should be cautious in interpreting the results of the ANOVA test and consider other factors such as the practical significance of the differences in tensile strength.

(a) To test the hypothesis that curing temperatures affect the tensile strength of the silicone rubber, we can perform an analysis of variance (ANOVA). ANOVA is used to compare the means of two or more groups and determine if there is a significant difference between them.

We can use the following null and alternative hypotheses:

Null Hypothesis (H0): The mean tensile strength of the silicone rubber is the same at all curing temperatures.

Alternative Hypothesis (HA): The mean tensile strength of the silicone rubber is different at least for one curing temperature.

We can use the ANOVA test to determine if there is a significant difference between the means of the groups. The ANOVA table is shown below:

Source | SS | df | MS | F

Between | 0.014 | 2 | 0.007 | 3.06

Within | 0.118 | 18 | 0.007

Total | 0.132 | 20

The F-statistic for the ANOVA is 3.06 and the p-value is 0.068. Since the p-value is greater than 0.05, we fail to reject the null hypothesis. Therefore, we can conclude that there is no significant difference between the mean tensile strength of the silicone rubber at different curing temperatures.

(b) The box plots of the data are shown below:

       +-----+-----+-----+

       |  25 |  40 |  55 |

       +-----+-----+-----+

       |     |     | 2.03|  -

       |     | 2.22|     |  -

       |     |     | 2.07|  -

       | 2.09| 2.14|     |  -

       | 2.10| 2.18|     |  -

       |     |     | 2.03|  -

       | 2.01| 2.11| 2.15|  -

       |     | 2.05|     |  -

       | 2.02| 2.18|     |  -

       +-----+-----+-----+

The box plots do not support the conclusion of the ANOVA test. The box plots show that the median and interquartile range for the tensile strength at 55°C are lower than those at 25°C and 40°C. This suggests that the mean tensile strength at 55°C may be lower than at 25°C and 40°C. However, the ANOVA test failed to reject the null hypothesis of equal means. This discrepancy may be due to the small sample size and the variability of the data. Therefore, we should be cautious in interpreting the results of the ANOVA test and consider other factors such as the practical significance of the differences in tensile strength.

Learn more about ANOVA test,

https://brainly.com/question/30459773

#SPJ11

if a function is ODD, it has symmetry to the y=x line or namely the origin.

if a function is EVEN, it has symmetry to the y-axis, or namely the x = 0 line.

the line above, moves from right to left, hits the y-axis and then begins to mirror the right-side, so it has symmetry with relation to the y-axis, namely is EVEN.

Answer:C. μ = 5

Step-by-step explanation:Option A (X = 5) and option D (X = 4.5) are incorrect because X represents a single value or observation, not a population parameter. Option B (μ = 4.5) is also incorrect because the question states that the mean of the population is 4.5, but we are looking for the equation that describes the population parameter which is the true mean of the entire population.

This information can help provide a more comprehensive understanding of the factors that contribute to the incidence of HIV in newborns.

The appropriate method of data collection for this scenario is observation. This involves collecting data by observing the births and recording the relevant information. It is not possible to conduct an experiment in this scenario since it is unethical to intentionally expose newborns to HIV.

The sampling technique that can be used in this scenario is stratified random sampling. The population can be stratified based on different factors such as the age of the mother, race/ethnicity, and socioeconomic status. Stratified sampling ensures that the sample is representative of the entire population, which is important in making accurate estimates.

In addition to observation and stratified random sampling, it may also be necessary to use surveys to collect additional information about the mothers and their infants, such as their demographic characteristics, medical history, and access to healthcare. This information can help provide a more comprehensive understanding of the factors that contribute to the incidence of HIV in newborns.

To learn more about socioeconomic visit:

https://brainly.com/question/2960570

#SPJ11

Claim: Youth voting can be beneficial for democracy and civic engagement.

Evidence: Only 6 percent of countries allow 16 year olds to vote which indicates is potential for more countries to explore this option.

Based on evidence, the author's third and final claim is that youth voting can be beneficial for democracy and civic engagement as its shows that allowing 16 and 17 year old to vote has been associated with higher voter turnout and increased civic engagement among young people.

The fact that only 6 percent of countries currently allow 16 year olds to vote suggests that there is potential for more countries to explore this option.

Read more about voting practice

brainly.com/question/30598697

#SPJ1

For the first question, the rope is 64 inches.

For the second question, the average gallons of water in the buckets is 4.725 gallons.

For the third question, the most commonly occurring number is called the mode.

To convert feet to inches, you multiply by 12. So 5 feet x 12 = 60 inches. Then you subtract the 4 inches that were cut, giving you 60 - 4 = 56 inches.

To find the average, you add up all the amounts of water and then divide by the number of buckets. So 3.2 + 4.6 + 0.3 + 9.8 = 18.9. Then you divide 18.9 by 4 to get 4.725 gallons.

For the third question, the most commonly occurring number is called the mode. So in this list, the mode is 6 because it appears most frequently.

Learn more about Averages:  https://brainly.com/question/27193544

#SPJ11

99.8% confidence interval with a margin of error of 0.02, using the estimated proportion of 0.31 from the previous poll.

To find the sample size needed to construct a confidence interval for a proportion with a specified margin of error, we use the following formula:

n = (z^2 * p * q) / E^2

where:

n is the sample size

z is the z-score corresponding to the desired level of confidence (99.8% in this case)

p is the estimated proportion from the previous poll (0.31 in this case)

q = 1 - p

E is the desired margin of error (0.02 in this case)

First, we need to find the value of z for a 99.8% confidence level. Using a standard normal distribution table, we can find that the z-score for a 99.8% confidence level is approximately 2.967.

Substituting the given values into the formula, we have:

n = (2.967^2 * 0.31 * 0.69) / 0.02^2

n = 1202.19

Rounding up to the nearest whole number, we need a sample size of n = 1203 to construct a 99.8% confidence interval with a margin of error of 0.02, using the estimated proportion of 0.31 from the previous poll.

To learn more about poll visit:

https://brainly.com/question/28844387

#SPJ11

The ratio of the area of a regular hexagon to the area of an equilateral triangle is 3/2.

The area of a regular hexagon is given by:

A[tex]_{H}[/tex] = (3√3)/2 · a²

where a is the length of the side of the hexagon.

a = 1 unit:

A[tex]_{H}[/tex] = (3√3)/2 · 1²

A[tex]_{H}[/tex] = (3√3)/2 unit²

The area of an equilateral triangle is given by:

A = (√3)/4 · b²

where b is the length of the side of the triangle.

b = 2 units:

A = (√3)/4 · 2²

A = (√3)/4 · 4

A = √3 unit²

ratio = A[tex]_{H}[/tex]/A

ratio = [(3√3)/2] / √3

ratio = 3/2  

Learn more about area on:

brainly.com/question/463363

#SPJ1

Your answer: (D) Regions with a higher percentage of seat belt usage tend to have lower numbers of highway deaths due to failure to wear seat belts.

In this context, "negative" means that there is an inverse relationship between the number of highway deaths due to failure to wear seat belts and the percentage of seat belt usage. Option (B) correctly states that the correlation is negative. Option (C) is incorrect because it suggests a comparison between two regions.

whereas the regression equation predicts the number of deaths based on seat belt usage within a given region. Option (D) is correct and states that regions with higher seat belt usage tend to have lower numbers of deaths. Option (A) and (E) are incorrect because they do not accurately describe the negative association between the variables.

Learn more about Percentage:

brainly.com/question/14801224

#SPJ11

To better understand the algorithm, it would be helpful to see the complete code and understand how it iteratively compares items to find the desired item a.

The algorithm you provided is incomplete, so I cannot provide a complete answer. However, based on the information provided, the algorithm selects an item a randomly from the set S and then iteratively compares it to other items in S. The goal is to find an item a such that at least n/4 items are smaller than a and at least n/4 items are greater than a.

This algorithm is an example of a randomized approximate median algorithm, which finds an item close enough to the median of a set of numbers. While it may not always find the exact median, it provides a good approximation and runs in linear time.

To better understand the algorithm, it would be helpful to see the complete code and understand how it iteratively compares items to find the desired item a.

learn more about algorithm

https://brainly.com/question/20270335

#SPJ11

Answer:

24

Step-by-step explanation:

Answer: Hence, Diameter = 2 × 12 = 24 cm. Q.:

Step-by-step explanation:

The actual error is:
|4194 - 4787.9476| = 593.9476
Since the bound for the error is 0.371, which is much smaller than the actual error of 593.9476, we can say that the Composite Simpson Rule with n=4 provides a very good approximation to the integral.

Sure! We can approximate the integral ∫10.5x4 dx using the Composite Simpson Rule with n=4.

First, let's split the interval [1,4] into 4 subintervals of equal width:

h = (4-1)/4 = 0.75

x0 = 1, x1 = 1.75, x2 = 2.5, x3 = 3.25, x4 = 4

Next, we need to evaluate the function at the endpoints and midpoints of each subinterval:

f(x0) = f(1) = 10.5(1)^4 = 10.5
f(x1) = f(1.75) = 10.5(1.75)^4 = 100.2842
f(x2) = f(2.5) = 10.5(2.5)^4 = 528.125
f(x3) = f(3.25) = 10.5(3.25)^4 = 1841.7969
f(x4) = f(4) = 10.5(4)^4 = 3360

Now, we can apply the Composite Simpson Rule formula:

∫10.5x4 dx ≈ h/3 [f(x0) + 4f(x1) + 2f(x2) + 4f(x3) + f(x4)]

≈ 0.75/3 [10.5 + 4(100.2842) + 2(528.125) + 4(1841.7969) + 3360]

≈ 4787.9476

To find a bound for the error using the error formula, we can use the following formula:

|E| ≤ K*h^4*(b-a)/180

where K is a constant, h is the width of each subinterval, and (b-a) is the length of the interval.

Since f''''(x) = 840, we can use K = 840.

|E| ≤ 840*(0.75)^4*(4-1)/180

≈ 0.371

To compare this to the actual error, we can find the exact value of the integral using the antiderivative:

∫10.5x4 dx = 10.5(1/5)x^5 + C

evaluated from x=1 to x=4:

= 10.5(1/5)(4^5 - 1^5)

= 4194

The actual error is:

|4194 - 4787.9476| = 593.9476

Since the bound for the error is 0.371, which is much smaller than the actual error of 593.9476, we can say that the Composite Simpson Rule with n=4 provides a very good approximation to the integral.

Learn more about "Composite Simpson Rule": https://brainly.com/question/30887746

#SPJ11

The angle between the kayakers is approximately 92 degrees when rounded to the nearest degree.

The correct option is (D)

We have:

One kayaker pulls with a force vector F sub 1 equals open angled bracket 180 comma 160 close angled bracket comma and the other kayaker pulls with a force vector F sub 2 equals open angled bracket 123 comma negative 128 close angled bracket period.

F sub 1 dot F sub 2 = ||F sub 1|| ||F sub 2|| cos(theta)

where "dot" represents the dot product, "|| ||" represents the magnitude of the vector, and theta is the angle between the two vectors.

We have to find the magnitudes of the two vectors:

||F sub 1|| = [tex]\sqrt{180^2+160^2}=236.13[/tex]

||F sub 2|| = [tex]\sqrt{123^3+(-128)^2}=174.13[/tex]

Now, we have to find the dot product:

F sub 1 dot F sub 2 = (180)(123) + (160)(-128) = -49920

Now we can solve for the angle theta:

-49920 = (236.13)(174.13) cos(theta)

cos(theta) = -0.156

Using the inverse cosine function, we find that:

theta = 91.89 degrees

As a result, rounded to the nearest degree, the angle between the kayakers is approximately 92 degrees.

Learn more about Magnitude at:

https://brainly.com/question/15681399

#SPJ1

The local extreme value is -n * e^(-1).

To get the local minimum and maximum points, we need to follow these steps:
The first derivative (g'(x)) of the function g(x) = nx * e^x.
Using the product rule, we have:
g'(x) = (n * e^x) + (nx * e^x)
The critical points by setting the first derivative equal to zero:
0 = (n * e^x) + (nx * e^x)
Solve for x to find the critical points:
0 = e^x (n + nx)
0 = n + nx
Since e^x is never equal to zero, the only solution is when n + nx = 0:
x = -1
The second derivative (g''(x)) to determine if the critical point corresponds to a local minimum or a local maximum:
g''(x) = (n * e^x) + (n^2 * e^x)
Plug the critical point x = -1 into the second derivative and check its sign:
g''(-1) = n * e^(-1) + n^2 * e^(-1)
Since e^(-1) is positive, the sign of g''(-1) will be determined by n(1 + n). If n > 0, g''(-1) > 0 and we have a local minimum. If n < 0, g''(-1) < 0 and we have a local maximum.
So, the function g(x) = nx * e^x has a local minimum or a local maximum at the point x = -1, depending on the value of n. To get the corresponding local extreme value, plug x = -1 into the original function:
g(-1) = n(-1) * e^(-1)
The local extreme value is -n * e^(-1).

Learn more about local extreme value here, https://brainly.com/question/29298072

#SPJ11

Based on the information, there is not sufficient evidence to conclude that tablets contain the right amount of active ingredients.

H0: µ = 320 versus Ha: µ ≠ 320

This is a two tailed test.

The test statistic formula is given as below:

t = (x - µ)/[S/✓(n)]

n = Sample size = 36 n = Population mean = 320 x = Sample mean = 319 S = Sample Standard deviation = 3

We have = Level of significance = 0.09 from the given data.

df = n - 1 = 35

1.7436 is the critical value.

[Using a t-table, we can determine this value.]

The P-value is 0.0533.

P-value = 0.09.

So, we reject the null hypothesis. There is not sufficient evidence to conclude that tablets contain the right amount of active ingredients.

Learn more about hypothesis on

https://brainly.com/question/606806

#SPJ1

The probability that the a point will fall on the red-shaded square to nearest hundredth is 0.56

A probability is a number that reflects the chance or likelihood that a particular event will occur. The certainty of an event is 1 which is equivalent to 100% in decimal.

Probability = sample space / total outcome

sample space = area of shaded part

total outcome = area of the whole shape.

area of the shaded part = 3×3 = 9

area of the whole shape = 4×4 = 16

Therefore the probability that a point will fall in the shaded area = 9/16

= 0.56( nearest hundredth)

learn more about probability from

https://brainly.com/question/24756209

#SPJ1

Answer:

0.56

Step-by-step explanation:

just got it right

Answer:

as the dimensions or shape of the parking lot.

15 and 16

Step-by-step explanation:

The statements that is correct is: C. Both functions are decreasing and have different rates of change.

A function is said to be decreasing if the value of y decreases for every value of x that increases.

In the first function given, as x values increased from 3 to 4, the y value decreases from 3 to 0. So it is a decreasing function.

Rate of change = 3 - 0 / 3 - 4

= 3/-1

= -3.

In the second function, as x values increases from -4 to 0, the y value decreases from 0 to -1. It is also a decreasing function.

Rate of change = change in y / change in x = 0 - (-1) / -4 - 0

= 1/-4

= -1/4.

Therefore, they both have the same rate of change.

Learn more about decreasing function on:

https://brainly.com/question/29745804

#SPJ1

The whole number that 3 is 1/2 of is 6 in the given case.

A whole number is a number that is not a fraction, decimal or negative number. It is a positive integer or zero. Examples of whole numbers are 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, and so on. Whole numbers are used in many areas of mathematics, including arithmetic, algebra, and number theory.

To find the answer, we can use the relationship between a part and a whole expressed as a fraction. We know that:

3 = (1/2) x whole number

To solve for the whole number, we can isolate it by multiplying both sides of the equation by the reciprocal of (1/2), which is 2:

3 x 2 = (1/2) x 2 x whole number

6 = whole number

Therefore, the whole number that 3 is 1/2 of is 6.

To know more about whole number,  here

https://brainly.com/question/461046

#SPJ4

if 3 is 1/2 of a whole number, what is the whole number?

To find the length of BC in the given right triangle ABC with AC = 48 and DC = 28, we used the Pythagorean theorem twice and simplified the equations to get BC² = 1520. Taking the square root, we got BC = 4√(95).

We are given a right triangle ABC with an altitude BD drawn to hypotenuse AC. We are also given that AC = 48 and DC = 28, and we need to find the length of BC.

To find the length of BC, we can use the Pythagorean theorem, which states that in a right triangle, the sum of the squares of the two shorter sides (the legs) is equal to the square of the length of the hypotenuse.

In this case, we have

AB² + BD² = BC² (using the Pythagorean theorem for triangle ABD)

AC² - DC² = BC² (using the Pythagorean theorem for triangle ADC)

Substituting AC = 48 and DC = 28, we get

AB² + BD² = BC²

48² - 28² = BC²

Simplifying, we get

AB² + BD² = BC²

(48 + 28)(48 - 28) = BC²

76 × 20 = BC²

BC² = 1520

Taking the square root of both sides, we get

BC = √(1520) = 4√(95)

Therefore, the length of BC in simplest radical form is 4√(95).

To know more about Pythagorean theorem:

https://brainly.com/question/14930619

#SPJ1

The interquartile range (IQR) is a more appropriate measure of dispersion than the range for the chess club's tournament play data, as it considers the middle 50% of the data and gives a better representation of the overall variability in the distribution.

When we are interested in describing the variability or spread of data distribution, we typically use a measure of dispersion or spread. The most commonly used measures of dispersion are the range, the interquartile range (IQR), variance, and standard deviation.

In the case of the chess club's tournament play, we have a list of the number of games won by each member. To calculate the range, we simply subtract the minimum value from the maximum value. However, the range is a very crude measure of dispersion because it only considers the two extreme values and ignores the rest of the data.

A more appropriate measure of dispersion, in this case, would be the interquartile range (IQR), which is defined as the difference between the 75th percentile and the 25th percentile of the data. The IQR gives us a better sense of the spread of the middle 50% of the data, which is more representative of the overall variability in the data distribution.

To learn more about data distribution

https://brainly.com/question/19990551

#SPJ4