What is the best description of the destructive interference of light?

A. The crest of one wave overlaps with the trough of another.

B. The crests of two waves intersect.

C. A longitudinal wave meets a transverse light wave.

D. A mechanical wave meets an electromagnetic wave.

Answer:

vₓ = 63.07 m/s

Explanation:

The horizontal vector component of the velocity can be found by the following formula:

[tex]v_x = vCos\theta[/tex]

where,

vₓ = horizontal vector component of velocity = ?

v = magnitude of velocity = 77 m/s

θ = angle with x-axis = 35°

Therefore,

[tex]v_x = (77\ m/s)Cos\ 35^o[/tex]

vₓ = 63.07 m/s

Answer:

Current = 0.6 A

Explanation:

Given that,

Three resistors 2 ohms, 3 ohms and 5 ohms are connected in series with a battery of voltage 6 V.

In series combination of resistors, the current through each resistor is the same while the voltage divides.

The equivalent resistance in this case is given by :

[tex]R_{eq}=R_1+R_2+....[/tex]

Put all the values,

[tex]R_{eq}=2+3+5\\\\R_{eq}=10\ \Omega[/tex]

Let I be the current. Using Ohm's law,

[tex]V=IR\\\\I=\dfrac{V}{R}\\\\I=\dfrac{6}{10}\\\\I=0.6\ A[/tex]

So, the current through each resistor and the current through the battery is equal to 0.6 A.

Answer:

Explanation:

same idea as before Liam,  first, find the parallel resistance in 35 || 20

(35*20)  / (35+20)  = 700 / 55  = 12.727272 ohms

now add the  12.727272 + 15 = 27.727272 ohms total resistance

V = IR

10 = I *    27.727272

10 / 27.727272 = I

0.360655 = I

V = IR  (again, but across the 15 ohm resistor)

V =     0.360655 * 15      

V = 5.4098                

Answer:

Option A. 1 bar = 1 atm

Explanation:

Pressure has various units of measurement. Each unit of measurement can be converted to other units of measurement. For example:

1 atm = 1 bar

1 atm = 760 mmHg

1 atm = 760 torr

1 atm = 1×10⁵ N/m²

1 atm = 1×10⁵ Pa

With the above conversion scale we can convert from one unit to the other.

Considering the question given above, it is evident from the coversion scale illustrated above that only option A is correct.

Thus,

1 bar = 1 atm

Answer: suppressed; chemotherapy

Explanation:

Chemotherapy is typically a drug treatment whereby powerful chemicals are used to kill the fast growing cells in ones body. Chemotherapy is usually used in the treatments of cancer.

Research revealed that patients who received chemotherapy in a hospital setting subsequently experienced

a (suppressed) immune response when they again visited the hospital. In this example, the (chemotherapy) would be classified as the US.

Answer:

Continental slope

Answer: The answer is Seamount. A seamount is  a submarine mountain located  on oceanic crust near mid-ocean. The image shows a very long seamount in Massachusetts and that is formed by volcanic activity in New England Seamounts.

Answer:

b.      

If you disconnect the wire, the magnetic field disappears and the nail is no longer a magnet. ... The current flowing through the wire makes the wire hot and drains the battery quickly.

Explanation:

Answer:

In marine ecosystems, climate change is associated with concurrent shifts in temperature, circulation, stratification, nutrient input, oxygen content, and ocean acidification. There are also strong linkages between climate and species distributions, phenology, and demography.

Explanation:

Mark her brainliest

Respuesta:

a) 12.3 m/s²

b) 153.75 m

c) 36.9 m/s

Explicación:

Paso 1: Información provista

Paso 2: Calcular la aceleración (a) del cochecito

Usaremos la segunda ley del movimiento de Newton.

F = m × a

a = F/m = 8 N / 0.650 kg = 12.3 m/s²

Paso 3: Calcular el espacio recorrido (x) en 5 segundos (t).

Usaremos la siguiente fórmula cinemática para un movimiento rectilineo uniformemente acelerado.

x = 1/2 × a × t²

x = 1/2 × 12.3 m/s² × (5s)² = 153.75 m

Paso 4: Calcular la velocidad (v) a los 3 segundos si parte del reposo

Usaremos la siguiente fórmula cinemática para un movimiento rectilineo uniformemente acelerado.

v = a × t

v = 12.3 m/s² × 3 s = 36.9 m/s

Los cálculos dados serían los siguientes:

a). Aceleración = 12,3 m / s ^ 2

B). Distancia recorrida en 5 segundos = 153,75 m

C). Velocidad en 3 segundos = 36,9 m / s

Dado que,

Fuerza aplicada = 8N

Peso de la silla de paseo en gramos = 650g

a). To find the aceleración,

[tex]F = m[/tex] × [tex]a[/tex]

[tex]a = F/m[/tex]

[tex]= 8 N/0.650 kg[/tex]

[tex]= 12.3 m/s^2[/tex]

Now,

b). :-espacio recorrido en 5 segundos y

Using the Kinematic formula:

[tex]x = 1/2[/tex] × [tex]a[/tex] × [tex]t^2[/tex]

[tex]x = 1/2[/tex] × [tex]12.3 m/s^2[/tex] × [tex](5s)^2[/tex]

= 153.75 m

c). Using the same formula,

velocidad a los 3 segundos si parte

[tex]v = a[/tex] × [tex]t[/tex]

[tex]v = 12.3 m/s^2[/tex] × [tex]3 s[/tex]

= 36.9 m/s

Learn more about "Acceleration" here:

brainly.com/question/3046924

Answer:

mark me as the brainly plss

Answer:

0.175g

Explanation:

A = A02^-(t/hl)

= (5.6g)2^-(750/150)

= 0.175g

Answer:

a. Increases

b. Two objects that have opposite charges

Explanation:

a. As the amount of charge on two objects increases, the strength of the electrical force between the objects increases. decreases. varies. remains the same.

According to Coulomb's law, the electrical force, F between two charges q and Q is directly proportional to the product of the charges.

So, F ∝ qQ

So, if q and Q increase, their product increases and thus, the strength of the electrical force between them increases.

So, if the amount of charge of two objects increases, the strength of the electrical force between the objects increases.

b. For which pair of objects would adding the same amount of electrons to each object result in a decrease in the electric force? two positively charged objects two negatively charged objects two objects that have no charge two objects that have opposite charges

Since according to Coulomb's law, the electrical force, F between two charges q and Q is directly proportional to the product of the charges.

So, F ∝ qQ

If the same amount of electrons are added to both charges and the charges are opposite in sign, the magnitude of one charge  increases while that of the other charge decreases. so the product qQ decreases and thus F decreases.

So, the electric force decreases when the same amount of electrons is added to two objects that have opposite charges.

Answer:

A increases

Explanation:

Answer: space race automobiles

Explanation:

they were used in space to get to planets

Answer:

90.15K

Explanation:

The formula is x°C + 273.15 = yK

Answer:

(-183°C) = 90.15K

Explanation:

-183°C is given

Now,

K = °C + 273

K = (-183) + 273.15

K = 90.15

Thus, (-183°C) = 90.15K

-TheUnknownScientist

Answer:

kinetic energy

Explanation:

it is most common

Answer:

a convex lens forms a larger, virtual image

Explanation:

The ray diagram shows that a convex lens forms a larger, virtual image. So, option a is correct.

A convex is defined as a lens in which the reflecting surface is bent inwards. It is thicker in the middle and thinner at the edges.

Here,

The convex lenses are the type of lens that can converge the beam of light coming from outside and reflect the rays and focus them on a point at the other side.

Convex lens is also known as a converging lens.

The image of the object here is formed on the opposite side of the object, so it is a virtual image that has been formed here.

The size of the image formed here is larger when compared to the size of the object. Thus larger image formed.

Thus the convex lens formed a larger and virtual image of the object here.

Hence,

The ray diagram shows that a convex lens forms a larger, virtual image. So, option a is correct.

To learn more about, convex lens, click:

https://brainly.com/question/12213784

#SPJ7

Answer:

vibrates, and they carry energy from one place to another. Look at the sound wave and the water wave. vibrating electric charges and can travel through space where matter is not present. to particle, electromagnetic waves travel by transferring energy between vibrating electric and magnetic fields.

Answer:

205N

Explanation:

The net force (F) is the difference between the applied force([tex]F_{A}[/tex]) and the kinetic frictional force([tex]F_{R}[/tex]). i.e

F = [tex]F_{A}[/tex] - [tex]F_{R}[/tex]    -----------------(i)

Note that;

[tex]F_{R}[/tex] = μmg

Where;

μ = coefficient of kinetic friction

m = mass of the body

g = acceleration due to gravity = 10m/s²

Equation (i) then becomes;

F = [tex]F_{A}[/tex] - μmg        -------------------(ii)

Given from question;

m = mass of motorcycle = 150kg

μ = 0.03

[tex]F_{A}[/tex] = 250N

Substitute these values into equation (ii) as follows;

F = 250 - (0.03 x 150 x 10)

F = 250 - (45)

F = 205N

Therefore, the net force applied to the motorcycle is 205N

Answer:

Amplitude

Explanation:

The lower the amplitude, the lower the frequency.

Answer:

kg*m/2

Explanation:

hope this helps just did it

Answer:

c

Explanation:

Answer:

a. heat your telescope, so its delicate optics are not cold

Explanation:

If star is just born and giving off  faint radiation in infrared. These radiation would be long range infra red radiation as the star is just born having less surface temperature.

In order to locate the star through telescope, it must be positioned at higher altitudes so that water vapor is minimum. The radiation from other heating objects might alter the light coming through the cosmos. Therefore, it is mandatory to shield the telescope from foreign radiations.

For the same reason mentioned above the telescope must have cold surroundings. Moreover, optics of the telescope must also be kept free from dust and dirt for clear vision.

However, Heating of telescope in order to safe optics from cold must not be done. This would change the wavelength of long range infra red radiations from star and hence, its location.

Answer:

7. 5 pa

8. 5 pa

9. 5 pa

10. 75 pa

11. 25 N

Explanation:

7.

P = F/ A

= 15 / 3

= 5 pa

8.

P = F/ A

= 35 / 7

= 5 pa

9.

area of floor = l × b

= 1 × 4

= 4m^ 2

P = F / A

= 20 / 4

=5 pa

10.

area in m^2 = 400/100 = 4m^2

P = F/A

= 300 / 4

= 75 pa

11.

F = P×A

= 25×1

= 25 N

Answer:

Gravitational

Explanation:

When studying atoms, scientists can ignore the  gravitational force between charged particles that make up the atoms because it is many millions of times smaller than other forces in the atom.

Answer:

Gravitational

Explanation:

Answer:

150J

Explanation:

Pi = Pf + Kf

200 = 50 + Kf

---> Kf = 150J

The kinetic energy of the swing at its lowest point is 150 J.

Energy is the ability or capability to do tasks, such as the ability to move an item (of a certain mass) by exerting force. Energy can exist in many different forms, including electrical, mechanical, chemical, thermal, or nuclear, and it can change its form.

Given in the question the potential energy of a swing is 200 J at its highest point and 50 J at its lowest point

Pi = Pf + K E

200 = 50 + K E

K E = 150 J

The kinetic energy of the swing at its lowest point is 150 J.

To learn more about energy refer to the link:

brainly.com/question/1932868

 #SPJ2

Answer:

heat and power

Explanation:

is the simultaneous production of electricity and heat both of which are used

Explanation:

A weather front is a boundary separating air masses of several characteristics eg. Air density, wind and humidity. Disturbed weather often arises from these differences

Answer:

Explanation:

Considering that this is parabolic motion, we know that the time the ball is in the air begins the instant it leaves the ground, reaches up to its max height, and then begins falling until it reaches the ground. Duh, right? Some important things happen during this trip. There are a few things we need to know in order to even begin the problem. Parabolic motion has x and y coordinates because it is 2-dimmensional; the acceleration in the x dimension is not the same as the acceleration in the y dimension; the velocity of an object at its max height is always 0; the time it takes to reach its max height (where the max height is half the distance the object travels) is half the time it takes to make the whole trip. Yikes. That's a lot to know and much to remember! Don't you just LOVE physics!?

For a. the hang time is the time the ball was in the air. Some of that stuff we talked about above is pertinent to solving this problem. We know that the velocity of the ball is 0 at its max height, and we also know that if we find the time it takes to reach its max height, we can double that number to find how long it was in the air for the whole trip. Use the one-dimensional equation

[tex]v=v_0+at[/tex] to find out how long it took to reach the max height. Even though we don't yet know the max height, we DO know that the velocity at that point is 0. BUT before we do that, since we are working in the y-dimension only, it would behoove us (benefit us) to find the velocity particular to this dimension. We are going to answer c. first, then backtrack.

c. wants the initial vertical velocity. That is found in the magnitude of the "blanket" or generic velocity times the sin of the angle, namely:

[tex]V_y=25sin(45)[/tex] so

[tex]V_y=[/tex] 18 m/s Now we can use that as the initial upwards velocity in part a:

[tex]v=v_0+at[/tex] and filling in:

0 = 18 + (-9.8)t and

-18 = -9.8t so

t = 1.8 seconds. But remember, this is only half the time it was in the air. The whole trip, then, takes 2(1.8) which is

t = 3.6 seconds

That's a and c. Now for b:

b. asks for the x component of the velocity:

[tex]V_x=Vcos\theta[/tex] which works out to be the same as the vertical velocity, since the sin and cos of 45 degrees is the same:

[tex]V_x=25cos45[/tex] and

[tex]V_x=[/tex] 18 m/s

Onto d:

d. wants the max height. Remember, it took 1.8 seconds to get to the max height, so using yet another one-dimensional equation:

Δx = v₀t + [tex]\frac{1}{2}at^2[/tex] where Δx is the displacement, v₀ is the initial upwards velocity, a is the pull of gravity, and t is the time it takes to reach that max height (Δx, our unknown). Filling in:

Δx = [tex]18(1.8)+\frac{1}{2}(-9.8)(1.8)^2[/tex] and if you do the rounding correctly, you'll end up with this:

Δx = 32 - 16 so

the max height, Δx, is 16 meters.

e. wants the range. That translates to the distance the ball traveled. This is found in a glorified version of d = rt, where d is displacement, r is velocity, and t is...well, time (that doesn't change):

Δx = vt so

Δx = 18(3.6) remember that the ball was in the air for a total of 3.6 seconds, so

Δx = 65 meters.

Phew!!!!! That's a lot! I suggest you learn your physics or this will make you insane by the end of the course!

Answer:

3

Explanation: