Final temp = 108.05.
What is Density? The relationship between a substance's mass and the amount of space it occupies is known as its density (volume). The density of a substance is determined by the mass, size, and arrangement of its atoms. Density (D) is defined as the product of a substance's mass and volume.For instance, a block of the harder, lighter element gold (Au) will be denser than a block of the heavier element lead (Pb) (Au). Styrofoam blocks are less dense than bricks. Mass per unit volume serves as its definition.Definition of density: A material's density is determined by how closely it is packed. As the mass per unit volume, it has that definition.What is the boiling point of the automobile radiator fluid prepared by mixing 1.09 l of ethylene glycol (hoch2ch2oh, density = 1.114 g/ml) with 1.16 l of water (density = 1.000 g/ml)?
Delta T = 1*.52*1000*1.114*1000/1160*62
=8.05 deg C
final temp = 108.05
To learn more about Density, refer to:
https://brainly.com/question/1354972
#SPJ4
consider the reaction . how much carbon dioxide (co2) is produced in the complete combustion of 100.0 g of methane (ch4)? c
The mass of CO2 produced is 275 g.
What is combustion?The term combustion refers to the situation in which a substance is burnt in oxygen. We have to first write down the equation of the reaction as follows;
[tex]CH_{4} + 2O_{2} ---- > CO_{2} + 2H_2}O[/tex]
Number of moles of methane = 100.0 g / 16 g/mol = 6.25 moles
Now;
1 mole of methane produces 1 mole CO2
6.25 moles of methane produces 6.25 moles of CO2
Mass of CO2 = 6.25 moles * 44 g/mol
= 275 g
Learn more about combustion:https://brainly.com/question/15117038
#SPJ4
Taking into account the reaction stoichiometry, 275 grams of CO₂ are formed in the complete combustion of 100.0 g of methane.
Reaction stoichiometryIn first place, the balanced reaction is:
CH₄ + 2 O₂ → CO₂ + 2 H₂O
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
CH₄: 1 moleO₂: 2 molesCO₂: 1 mole H₂O: 2 molesThe molar mass of the compounds is:
CH₄: 16 g/moleO₂: 32 g/moleCO₂: 44 g/moleH₂O: 18 g/moleThen, by reaction stoichiometry, the following mass quantities of each compound participate in the reaction:
CH₄: 1 mole ×16 g/mole= 16 gramsO₂: 2 moles ×32 g/mole= 64 gramsCO₂: 1 mole ×44 g/mole= 44 gramsH₂O: 2 moles ×18 g/mole= 36 gramsMass of CO₂ formedThe following rule of three can be applied: if by reaction stoichiometry 16 grams of CH₄ form 44 grams of CO₂, 100 grams of CH₄ form how much mass of CO₂?
mass of CO₂= (100 grams of CH₄× 44 grams of CO₂)÷ 16 grams of CH₄
mass of CO₂= 275 grams
Finally, 275 grams of CO₂ are formed in the complete combustion of 100.0 g of methane.
Learn more about the reaction stoichiometry:
brainly.com/question/24741074
brainly.com/question/24653699
#SPJ4
james chadwick discovered this particle, which was the last of the subatomic particles to be characterized.
James chadwick discovered this particle neutron also neutrino called as is last of the subatomic particles to be characterized.
In 1932 james chadwick announced that the core also contained a new uncharged particle, which he called the neutron. neutron is also called neutrino he proved the existence of neutrons elementary particles devoid of any electrical charge. james chadwick was an English physicist who was awarded the 1935 Nobel prize in physics for his discovery of the neutron in 1932.
Know more about last of the subatomic particles
https://brainly.com/question/28537523
#SPJ4
If the solutions of nabr and hg(no3)2 are mixed, how many precipitation reactions will there be?
If the solutions of NaBr and Hg(NO₃)₂ are mixed, there will be one precipitation reaction.
What is a Precipitation Reaction?When dissolved substances react, one (or more) solid products are created, which is termed a precipitation reaction. These kinds of reactions, which are also occasionally known as double displacement, double replacement, or metathesis reactions, frequently involve the exchange of ions between ionic compounds in aqueous solutions.The development of a solid form residue known as the precipitate occurs during precipitation reactions, which are typically double displacement processes.Additionally, when two or more solutions containing various salts are mixed, these reactions take place, resulting in the creation of insoluble salts that precipitate out of the solution.The precipitation reaction of the given reaction is
NaBr + Hg(NO₃)₂ ⇒ HgBr₂ + NaNO₃.
Learn more about precipitation reaction with the given link
https://brainly.com/question/24158764
#SPJ4
describe how private citizens have a voice in which projects the federal government will fund.
Explanation:
Two main ways, free elections, casting your vote for the candidate supporting your goals. Second, Lobbying the sitting gov.
A student compares the boiliing point of a substance having different intermolecular forces. which dependent variable did the student most likely use?
When the student compares the boiling point of a substance having different intermolecular forces, the dependent variable which the student most likely to use is the boiling point.
The dependent variable is the variable in an experiment which is to be measured or to be tested, whereas the independent variable is the variable which is changed or has been controlled during the experiment. The independent variable is most likely used to test the effects produced by the dependent variable.
The dependent variable which the student used in experiment is the boiling point because heat supplied determines whether substance is boiled or not boiled on the basis of the intermolecular forces present in them.
The independent variable is responsible for the changes during an experiment and it does not rely on the results of experiment.
To learn more about the independent variable,
brainly.com/question/28361562
#SPJ4
A sample of 100 "Eggium" (Eg) atoms are taken where 30 have a mass of 15, 40
have a mass of 16, 20 have a mass of 17, and 10 have a mass of 18. What is the
percent abundance of Eg-17?
A 10%
B 20%
C 30%
D 40%
F 80%
*
The percentage abundance of Eg-17 is 20% (Option B)
Data obtained from the questionThe following data were obtained from the question:
Total sample = 100 Amount of Eg-15 = 30Amount of Eg-16 = 40Amount of Eg-17 = 20Amount of Eg-18 = 10Percentage abundance of Eg-17 =?How to determine the pecentage abundance of Eg-17The pecentage abundance of Eg-17 can be obtained as illustrated below:
Percentage abundance of Eg-17 = (Amount of Eg-17 / total) × 100
Percentage abundance of Eg-17 = (20 / 100) × 100
Percentage abundance of Eg-17 = 0.2 × 100
Percentage abundance of Eg-17 = 20%
Thus, the percentage abundance of Eg-17 is 20% (Option B)
Learn more about percentage abundance:
https://brainly.com/question/14988832
#SPJ1
a compound contains only c, h, and n. combustion of 35.0 mg of the compound produces 53.0 mg co2 and 32.6 mg h2o. what is the empirical formula of the compound?
Consequently, the compound and empirical formula will be:
Methanediamine, CH₃N.
How to determine the mass of Carbon
Mass of CO₂ = 53 mg
Molar mass of CO₂ = 44 g/mol
Molar of C = 12 g/mol
Mass of C =?
Mass of C = (12 / 44) × 53
Mass of C = 14.45 mg
How to determine the mass of H
Mass of H₂O = 32.6 mg
Molar mass of H₂O = 18 g/mol
Molar of H = 2 × 1 = 2 g/mol
Mass of H =?
Mass of H = (2 / 18) × 32.6
Mass of H = 3.62 mg
How to determine the mass of N
Mass of compound = 35 mg
Mass of C = 14.45 mg
Mass of H = 3.62 mg
Mass of N =?
Mass of N = (mass of compound) – (mass of C + mass of H)
Mass of N = 35 – (14.45 + 3.62)
Mass of N = 16.93 mg
How to determine the empirical formula
C = 14.45 mg
H = 3.62 mg
N = 16.93 mg
Empirical formula =?
Divide by their molar mass
C = 14.45 / 12 = 1.204
H = 3.62 / 1 = 3.62
N = 16.93 / 14 = 1.209
Divide by the smallest
C = 1.204 / 1.204 = 1
H = 3.62 / 1.204 = 3
N = 1.209 / 1.204 = 1
Thus, the empirical formula of the compound is CH₃N
What is empirical formula?An empirical formula is a compound's chemical formula that only specifies the ratios of the elements it contains and not the precise number or arrangement of atoms. The element in the compound with the lowest whole number ratio would be this one.
An empirical formula is used to indicate the simplest whole-number ratio of the various atoms in a molecule.
The precise number of various atom types present in a compound's molecule is indicated by the molecular formula.
Empirical formulae are beneficial since figuring out the molecular formula can be immensely aided by knowing the relative amounts of each constituent in a molecule.
To learn more about empirical formula from the given link:
brainly.com/question/14044066
#SPJ4
A 5.5 l sample of a 0.25 m hno3 solution is mixed with 1.2 l of a 0.34 m hcl solution. what is the ph of the mixture?
The pH of the solution is 0.57.
What is the pH?We need to obtain the pH of the solution. The pH is the negative logarithm of the hydrogen ion concentration of the solution. Let us now see the method to obtain the hydrogen ion concentration of the mixture.
Volume of nitric acid = 5.5 l
Concentration of nitic acid = 0.25 m
Volume of HCl = 1.2 l
Concentration of HCl = 0.34 m
Number of moles of nitric acid = 0.25 m * 5.5 l = 1.375 moles
Number of moles of HCl = 0.34 m * 1.2 l = 0.408 moles
Total number of moles of hydrogen ions = 1.375 moles + 0.408 moles = 1.783 moles
Concentration of hydrogen ions = 1.783 moles/ 5.5 L + 1.2 L
= 0.266 M
pH of the solution = - log(0.266 M)
= 0.57
Learn more about pH:https://brainly.com/question/15289741
#SPJ1
Lauryn serves a volleyball with a mass of 2.1 kg. The ball leaves her hand with a speed of 30 m/s. Find the energy of the ball.
Answer: 1/2 X 2.1 kg X 30m/s^2 = 945 Joules
Explanation:
20 points
What is true about most of the mass in the universe?
It was created in the last 30,000 years.
It is invisible to astronomers.
It has already decayed into pure energy.
It is made of nitrogen atoms
What is true about the mass in the universe is that It is invisible to astronomers. Option B
What is dark matter?Matter is anything that has weight and occupy space. The term dark matter has to do with a type of matter that does exist in outer space but is made up of non luminous material formed by interaction between the particles of matter. This particles are known the neither absorb or emit light at all frequencies.
An astronomer is a scientist who has been trained to study the outer space. What we mean by a non luminous body is a body that does not produce light. Not all matter in the universe could allow light to pass through them. Its only the matter that can allow light to pass through them whose mass could be measured.
The earth is largely composed of this dark matter that can not be seen because they are not transparent to light hence what is true about the mass in the universe is that It is invisible to astronomers. Option B
Learn kore about dark matter:https://brainly.com/question/4444128
#SPJ1
The density of steel is about 8.0g/cm³ and the density of water is 1.0 g/cm³ . If the mass of steel used for the ship is 50,000 kg, what would the volume need to be for the ship to float on water?
In order for the ship to float, the volume of the ship must be equal to or greater than 50,000,000 cm³.
What would be the volume of the ship in order for it to float on water?According to the principle of floatation, a body will float in a liquid if it displaces a weight of liquid equal to its own weight.
Therefore, for the ship to float in water, it must displace a weight of water at least equal or greater than its own weight.
Considering the data given:
The density of steel = 8.0g/cm³
the density of water is 1.0 g/cm³
the mass of steel used for the ship = 50,000 kg
Based on the principle of floatation, mass of water to be displaced is equal to the mass of the ship.
Mass of water to be displaced = 50000 kg
Mass of water to be displaced in g = 50,000,000 g
Volume of 50000000 g of water = 50,000,000 g * 1.0 g/cm³
Volume of 50000000 g of water = 50,000,000 cm³
Therefore, volume of the ship must be equal to or greater than 50,000,000 cm³ for the ship to float.
Learn more about principle of floatation at: https://brainly.com/question/17032479
#SPJ1
arrange the following amines in order of decreasing water solubility, putting the most soluble amine first.
Amines in order of decreasing water solubility, putting the most soluble amine first is 2, 1, 3.
What is the solubility of amine in water?
Hydrogen bonding between water molecules and lower aliphatic amines are possible. These amines are therefore water soluble.
The molar mass of amines increases with an increase in the size of the hydrophobic alkyl component. Its solubility in water is often reduced as a result. Higher amines cannot be dissolved in water. Alcohol, benzene, and ether are examples of organic solvents that easily dissolve amines.
To learn more about solubility of amines click the given link
https://brainly.com/question/19738583
#SPJ4
A box measures 9.00 cm by 3.15 cm by 6.03 cm. Using the formula that Volume = L x W
x H, state its volume in cm³ with the proper number of significant figures
Answer:3
Explanation:
3
The density of lead is 11.4g/cm^3. the mass of a lead ball with a radius of .50mm is?
The mass of a lead ball with a radius of .50mm is 5.9714226×[tex]10^{6}[/tex] g
A substance's density is defined as its mass per unit of volume. Density is most frequently represented by the symbol, however Latin letter D may also be used. The formula for density is mass divided by volume.
ρ = m/v
For, v = 4/3π[tex]r^{3}[/tex]
v = 4/3×3.14×[tex]50^{3}[/tex]
v = 523,809 [tex]cm^{3}[/tex]
As, density = mass / volume
11.4 = mass / 523,809
mass = 5971422.6 g
mass = 5.9714226×[tex]10^{6}[/tex] g
So, the mass of a lead ball with a radius of .50mm is 5.9714226×[tex]10^{6}[/tex] g
Learn more about mass here:
https://brainly.com/question/6107689
#SPJ4
in order to grow reproduce, what do you think yeast needs?
Answer:
Yeast reproduce asexually by a process called budding. Yeasts need alot of oxygen for growth.
Explanation:
In order to drive to the new camp the team can only drive during the day to avoid the
zombie's wake period. There are currently 11 safe hours in which to drive. The water rig
the team is driving will over heat at 40 miles an hour so they agreed to only drive 35
mph. How many miles will the team be driving?
The number of miles the team will be driving is 385 miles
What is speed?Speed is the distance travelled per unit. Mathematically, it can be expressed as:
Speed = distance / time
With the above formula, we can obtain the distance the team will drive. Details below
How to determine the distance the team will driveThe following data were obtained from the question:
Time = 11 hourSpeed = 35 mphDistance =?Speed = distance / time
Cross multiply
Distance = speed × time
Distance = 35 × 11
Distance = 385 miles
Learn more about speed:
https://brainly.com/question/680492
#SPJ1
6. Makes sure that oxygen is absorbed into
the blood.
a. Circulatory System
b. Digestive System
c. Respiratory System
d. Excretory System
Which two phase transitions can liquid undergo? (2 answers)
A. melting
B. depostion
C. vaporization
D. freezing
E. sublimation
Solid iron(iii) oxide reacts with hydrogen gas to form solid iron and liquid water. express your answer as a chemical equation. identify all of the phases in your answer.
The balanced chemical equation for the reaction between cast-iron (III) oxide and hydrogen gas to form solid iron and liquid water is:
Fe₂O₃(s) + 3 H₂(g) ⇒ 2 Fe(s) + 3 H₂O(l)
Let's consider the unbalanced equation that happens when solid iron (III) oxide reacts with hydrogen gas to form solid iron and liquid water. this is often a redox reaction.
Fe₂O₃(s) + H₂(g) ⇒ Fe(s) + H₂O(l)
We can balance it using the trial and error method. First, we'll balance O atoms by multiplying H₂O by 3.
Fe₂O₃(s) + H₂(g) ⇒ Fe(s) + 3 H₂O(l)
Then, we balance H atoms by multiplying H₂ by 3.
Fe₂O₃(s) + 3 H₂(g) ⇒ Fe(s) + 3 H₂O(l)
Finally, we get the balanced equation by multiplying Fe by 2.
Fe₂O₃(s) + 3 H₂(g) ⇒ 2 Fe(s) + 3 H₂O(l)
The balanced chemical equation for the reaction between cast-iron (III) oxide and hydrogen gas to form solid iron and liquid water is:
Fe₂O₃(s) + 3 H₂(g) ⇒ 2 Fe(s) + 3 H₂O(l)
What is the balance formula equation?A balanced equation is an equation for a reaction in which the number of atoms for each element in the reaction and the total charge is the same for both the reactants and the products. In other words, the mass and therefore the charge are balanced on both sides of the reaction
learn more about balancing chemical equations here: brainly.com/question/7181548
#SPJ4
Atoms of what class of elements are used to absorb electrons in electron-dense stains?
The elements of heavy metals are used to absorb electrons in electron-dense stains.
What are heavy metals?A heavy metals are generally defined as metals with relatively high densities, atomic weight and atomic number.
They toxic and poisonous in nature. They occurs naturally and are very essential to life.
Arsenic, cadmium, lead, copper, nickel and mercury are the most commonly used heavy metals.
Electron staining means to absorb heavy metals of high scattering power to biological specimens which exhibit a small scattering power for electrons.
Thus, the elements of heavy metals are used to absorb electrons in electron-dense stains.
To learn more about heavy metals, refer to the link below:
https://brainly.com/question/3937595
#SPJ4
Consider two samples of water of equal mass; one that is at 20. 0 °c and the other is at 30. 0 °c. Please compare the volume of these two water samples, and explain how you determined this conclusion.
The volume of water at 30°C will be more than the volume of water at 20 °C because of the property of thermal expansion.
We generally observe that objects around us expand on heating.
Expansion due to heating is known as thermal expansion. It is of the following 3 types-
Increase in Length - Linear ExpansionIncrease in Area - Area ExpansionIncrease in Volume - Volume ExpansionWhen a liquid like water is heated from a lower temperature to a higher temperature its volume expands which means that it undergoes volume expansion.
Thus, The volume of water at 30°C will be more than the volume of water at 20°C because of the property of thermal expansion.
To know more about "thermal expansion", refer to the following link:
https://brainly.com/question/14092908?referrer=searchResults
#SPJ4
How many hudrogen bonds exist between this dna strand and its complementary stang?
The Guanine-Cytosine base pair is joined by three hydrogen bonds, the Adenine-Thymine base pair is bound together by two hydrogen bonds.
What is DNA?
Deoxyribonucleic acid (DNA) is an organic molecule that has instructions for protein production and genetic data. Every cell in an organism contains it to some extent. DNA is an essential component of reproduction, and it is through the transmission of DNA from a parent or parents to offspring that genetic inheritance is transmitted.
The double helix form of DNA is made up of two connected strands that spiral around one another to resemble a twisted ladder. The backbone of each strand is composed of alternating deoxyribose and phosphate groups. Adenine (A), cytosine (C), guanine (G), or thymine are the four bases that are joined to each sugar.
To learn more about DNA click the given link
https://brainly.com/question/16099437
#SPJ4
which of the following statements are true about the properties of both molecular and ionic compounds? select all that apply.
They are neutrally charged
They typically do not conduct electricity in solid state
Molecular compounds are formed when elements share electrons in a covalent bond to form molecules.Ionic compounds are formed by the strong electrostatic interactions between the ions.Ionic compounds have high boiling and meltin point and electrical conductivity than covalent compounds.Eventhough,the molecular compounds and ionic compounds have some similarities in their properties.They both are electrically neutral.The molecules formed due to both molecular and ionic compound are electrically neutral.In ionic bonding,the two charges join and cancel each other out,and in covalent bonding,two electrically neutral components come together.So,both the compounds are electrically neutral.Ionic compounds conducts electricity in aqueous or molten solution,it is because of their ions are very free to move.Ionic compounds do not conduct electricity in solid state.Molecular or covalent compounds do not conduct electricity either in pure form or when dissolved in water.Molecular compounds do not conduct electricity because they do not transfer electrons unless they reacts.To know more about molecular compounds visit : https://brainly.com/question/23088724
#SPJ4
which of the following formulas represents a carbohydrate? which of the following formulas represents a carbohydrate? c3h7no2 c55h98o6 c10h16n5o13p3 c8h16o8
The formula that represents a carbohydrate is C8h16C8.
Carbohydrates contain carbon, hydrogen, and oxygen and have a hydrogen-to-oxygen ratio of 2:1
What is a carbohydrate?
Carbohydrates are a kind of macronutrient found in many foods and beverages. Most carbohydrates occur naturally in plant-based foods, like grains.
To know more about carbohydrates go to the given link:
https://brainly.com/question/336775
#SPJ4
to use tlc, it is necessary to be able to see where the spots are after eluting and drying the plate. which of the following are possible ways to see where the compounds are on the plate. most compounds make complexes when exposed to iodine vapor, and the iodine is intensely colored. some compounds are naturally colored, so you just need to look.
To use tlc, it is necessary to be able to see where the spots are after eluting and drying the plate.
What is TLC?
Non-volatile mixtures can be separated using the chromatography technique known as thin-layer chromatography (TLC). On a piece of glass, plastic, or aluminium foil that has been covered with a thin layer of an adsorbent substance—typically silica gel, aluminium oxide (alumina), or cellulose—thin-layer chromatography is carried out.
As a quick and non-destructive technique, using UV light to identify spots (compounds) on a TLC plate is quite popular. UV light is significantly absorbed by aromatic systems and highly conjugated systems. The majority of TLC plates include zinc sulphide, which gives them a green appearance when exposed to short-wavelength UV.
Iodine sublimes and reacts with the compounds on the TLC plate when the plate is placed in the chamber and covered, producing yellow-brown blotches (Figure 2.33d). Iodine interacts with numerous chemical molecules to produce colourful complexes, which causes the colouring. About half of the possible chemicals will work with this stain.
To learn more about TLC from the given link below,
https://brainly.com/question/24082436
#SPJ4
Compared with a mercury barometer, the column height for an alcohol barometer would be?
An alcohol barometer would have a higher column height when compared to a mercury barometer. If the Magdeburg hemispheres were 2 km above the sea, it would be simpler to separate them. Two pistons make up a hydraulic device, one with a tiny cross-section area and the other with a larger cross-section area.
Give An explanation of a mercury barometerBarometric pressure, commonly known as air pressure or atmospheric pressure, is measured by a device called a mercury barometer using the various physical properties of mercury contained in a tube. Barometers are helpful instruments for weather forecasting since they can be used to predict impending changes in the weather. For instance, when the barometric pressure falls, it may indicate the impending arrival of storms, rain, or wind. On the other side, a rise in atmospheric pressure could suggest that dry, fair weather may start to develop soon. There is no assurance that the weather will behave as predicted, despite the fact that barometer reading interpretation is a fairly precise science.
Learn more about mercury barometer here:-
https://brainly.com/question/16982367
#SPJ4
to what temperature must a sample of helium gas be cooled from 22.2 oc to reduce its volume from 1.00 l to 100 cm
Helium gas must be cooled from 22.2°C to 2.22°C in order to decrease its volume from 1L to 100cm.
22.2°C = 1L
x = 0.1L
x = 2.22°C
What is helium gas?
Helium (He) is a chemical element and noble gas in Group 18 of the periodic chart. Helium is the second-lightest element after hydrogen, a colorless, odorless, and tasteless gas that turns into a liquid at 268.9 °C (452 °F).
Along with other natural gases, helium gas is found beneath the crust of the Earth. Natural gas is processed to obtain commercial helium when the helium concentration is more than 0.3%.
To learn more about helium gas click the given link
https://brainly.com/question/8040766
#SPJ4
write and explain ten careers opportunity in chemistry
Chemistry careers range in nature, pay, and educational requirements;
Chemical analyst
An analytical chemist analyses the composition and quantity of substances as well as how these elements may behave and interact with one another.
Which nation offers the finest jobs in chemistry?Germany is the #1 destination for chemistry students looking to study abroad since it is known for its accommodating attitude toward foreign students. Due to Germany's dominance in Europe's chemical industry, several institutions there offer specialised courses designed for graduates who want to get into the workforce.
MSc. which the industries desire. For their senior scientist positions, most firms demand Ph.D. and post-doctoral fellows.
Engineer, Chemical
Designing and creating new goods from raw materials and changing materials' states are specialties.
as in the production of plastic from oil. Chemical engineers may work in practically any business, helping to create cutting-edge, high-end goods like biocompatible implants and ultra-strong materials.
learn more about Chemistry careers refer
https://brainly.com/question/17510922
#SPJ9
If a 500 ml sample of water contains 2.6 x 10-6 g of iron, what is the concentration of iron in ppb?
a. 5.2 ppb
b. 5.2 x 10-7 ppb
c. 5200 ppb
d. 5.2 x 10-3 ppb
The concentration of iron in ppb is 5.2 ppb
In atmospheric chemistry, PPM( parts per million) and PPB( parts per billion) units are used to express the concentration of gases. PPB stands for parts per billion, while PPM stands for parts of gas per million parts of air.
2.6 × 10⁻⁶ grams of iron in 500 ml of water.
Now, converting milliliter into liter:
500 mL = 500 mL × ( 1L / 1000 mL ) = 0.5 L
Now for ppm, mass must be in mg.
2.6 × 10⁻⁶ grams = 2.6 × 10⁻⁶ grams × ( 1000 mg / 1 grams ) = 2.6 × 10⁻³ mg
Then, the concentration of iron in ppm will be:
2.6 × 10⁻³ mg / 0.5 L = 5.2 × 10⁻³ ppm
Now, 1 ppm = 1000 ppb
Therefore,
5.2 × 10⁻³ ppm × 10³ = 5.2 ppb
Learn more about concentration here:
brainly.com/question/17206790#:~:text=15%20people%20helped-,Answer%3A,either%20solvent%20or%20total%20solution.
#SPJ4
examine the following order of elution of compounds containing certain functional groups from fastest to slowest, and indicate which mistake has been made.hydrocarbons, olefins, ethers, amines, ketones, aldehydes, esters, alcohols, aromatics, and carboxylic acids
On examining the following order we can say that ethers and esters got switced.
Alkyl halides, saturated hydrocarbons, unsaturated hydrocarbons, ethers, esters, ketones, amines, alcohols, phenols, and acids are typically eluted from columns in the following order. Salts and polymeric substances frequently do not elute. From fastest to slowest elution, the following substances are roughly in order based on polarity: hydrocarbons, olefins, ethers, halocarbons, aromatics, ketones, aldehydes, esters, alcohols, amines, and acids.
Be aware that regardless of the polarity of the compounds, the more polar the solvent, the quicker the chemicals elute. This means that the order in which chemicals elute from a TLC or column cannot be altered by altering the solvent's polarity. So, on examining the following order we can say that ethers and esters got switced.
Learn more about ethers here:
https://brainly.com/question/18270903
#SPJ4