Answer:
1+
Explanation:
Sodium has one valence electron. When it bonds with a nonmetal like sulfur, it gives up that electron to become a positively charged ion (cation) with a charge of 1+.
Which statement is true about this fuel cell?
It is self contained like a battery.
It continually needs to be charged.
It has an electrolyte that acts as a salt bridge.
It does not require the input of fuels from an outside source.
The statement which is true about the fuel cell is that It has an electrolyte that acts as a salt bridge.
What is Fuel cell ?A fuel cell is an electrochemical cell that converts the chemical energy of a fuel (often hydrogen) and an oxidizing agent (often oxygen) into electricity.
The fuel cell has an electrolyte that acts as a salt bridge.
As electrolytes are nothing but the salts which are present at the inner side of the U-Tube considered as Salt bridge present in fuel cell.
In this way, Fuel cell has electrolyte that acts as a salt bridge.
learn more about salt bridge here ;
https://brainly.com/question/14969258
#SPJ1
What change releases energy.
Answer:
When a substance changes states, it requires energy when it goes to a higher energy state and releases energy when it goes to a lower energy state. Gas has a higher energy than liquid and liquid has a higher energy than solid. The three state changes from a lower energy to a higher energy are: solid to liquid: fusion. liquid to gas: vaporization
In this chemical equation which of the following identifies the reactant(s)?
Answer:
2na+o2
Pls mark as brainliest
Answer:
A
Explanation:
2NA + 02
These are your reactants, which are always on the left side of the chemical equation.
hope this helped mark brainliest pls xx
You add 28 grams of carbon. You find the actual yield to be 181.2 grams of CO2. What is the percent yield of CO2?
Answer:
79.14%
Explanation:
Given the equation : 2Fe2O3 + 3C 4Fe + 3C02
The theoretical yield of CO2 ; is 102.6g
Actual yield = 81.2 gram
Percentage yield = (actual yield / theoretical yield) * 100%
Percentage yield = (81.2 / 102.6) * 100%
Percentage yield = 0.7914230 * 100%
Percentage yield = 79.14%
Hence, tbe percentage yield of CO2 is 79.14%
Which is the formula for a binary ionic compound composed of
iodine and sodium?
a Ina
b Either INa or Nal is acceptable.
С
lodine and sodium do not form a binary ionic
compound.
d Nal
Answer:
D. Nal
Explanation:
Took a K12 test and it was correct! :3 Hope this helps!
how many atoms are in 1.6g C? Answer in units of atoms.
(no answer choices were given)
Answer:
6.022 ×10(index 23) / 7.5 = 0.8293 ×10(index 23)
Explanation:
molar mass of C = 12gmol
therefore in 12g of C there is one mole or an amount of 6.022 ×10(index 23)
∴12g/6.02210(index 23) ×1.6g
As the randomness of a system increases, the entropy of the system:
A) decreases
B) increases
C) remains the same
Answer:
it most likely increases
is an example of a solution that contains a dissolved substance
Answer:
An aqueous solution is water that contains one or more dissolved substances. The dissolved substances in an aqueous solution may be solids, gases, or other liquids.
transmutation occurs during which type of radioactive decay
Explanation:
Transmutation, conversion of one chemical element into another. A transmutation entails a change in the structure of atomic nuclei and hence may be induced by a nuclear reaction (q.v.), such as neutron capture, or occur spontaneously by radioactive decay, such as alpha decay and beta decay (qq. v.).
The balanced chemical equation below shows the reaction between nitrogen (N2) and hydrogen (H2) to form ammonia (HN3).
N2 + 3H2 → 2NH3
If 10.0 grams of nitrogen reacts with hydrogen to form 12.0 grams of ammonia, then how many grams of hydrogen were used in this
Answer:
hope u umderstood ! if explanation needed then conta t
Nitrogen and hydrogen react to form ammonia and is a combination reaction. The grams of hydrogen used in the reaction with nitrogen to form ammonia is 2.0 grams.
What is mass in grams?Mass is the weight or the product of the volume and density of the substance. It can be calculated as, [tex]\rm volume \times density.[/tex]
Given,
Mass of nitrogen = 10.0 grams
Mass of ammonia = 12.0 grams
Mass of hydrogen = x gram
Solving for x:
[tex]\begin{aligned}\rm 10 + x &= 12\\\\\rm x &= 12.0 - 10.0\\\\&= 2.0 \;\rm grams\end{aligned}[/tex]
Therefore, 2.0 grams of hydrogen is required to react with 10.0 grams of nitrogen to produce 12.0 grams of ammonia.
Learn more about mass here:
https://brainly.com/question/6699336
i have a quiz yall help
How many moles are in a 18 L tank of nitrogen gas at STP?
Answer:
12
Explanation:
i feel like its 12 because moles are medium sized but are they adult moles or baby moles or growing moles
Mole measure the number of elementary entities of a given substance that are present in a given sample. Therefore, 0.803moles of nitrogen gas are there in a 18 L tank of nitrogen gas at STP.
What is mole?The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number.
Mathematically,
number of moles of any ideal gas =given volume ÷Volume occupied by one mole of a ideal gas at STP
Volume occupied by one mole of a ideal gas at STP=22.4L
given volume of nitrogen gas= 18 L
substituting all the given values in the above equation we get,
number of moles of nitrogen gas =18 L ÷22.4L
number of moles of nitrogen gas =0.803moles
Therefore, 0.803moles of nitrogen gas are there in a 18 L tank of nitrogen gas at STP.
To know more about mole, here:
https://brainly.com/question/15209553
#SPJ2
HELPP asap I’ll mark you as brainlister!!!!!!
What is the mass in grams of 4.8 moles of Calcium Hydroxide?
Answer:
355.2 grams
Explanation:
m = M×n= (40 + 2(16+1))×4.8= 355.2 (g)
Find the final product for: Li + Br and show work.
Lithium is atomic number 3, so it has valency 1
While, Bromine is atomic number 35, and has valency 1
Lithium has an extra electron while Bromine need an electron, since they both need and have one electron, the form
LiBr (Lithium Bromide) where Li is +ve charged and Br is -ve charged
Happy to help :)
What is the state change of a gas to a liquid is called?
Answer:The process in which a gas changes to a liquid is called condensation. Other examples of condensation are shown in Figure below. A gas condenses when it is cooled below its boiling point.
Explanation:
There are 4 phases for h20 solid liquid vapour and gas.
In the vacuum of space there are only 2 phases solid and gaseous, both liquid and vapour cannot exist in the absolute freezing temperature of the vacuum of space and crystalise instantly.
Watch a space shuttle dump water in space and it instantly freezes, and when in direct sunlight instantly turn to its gaseous phase and becomes invisible to the naked eye by the process of sublimation.
When h20 freezes in the shadow of the shuttle to ice crystals they instantly sublimate to the a gaseous state when they come into contact with direct sunlight.
You can see all 4 phases if you place ice cubes [ solid phase ] in a pan on a stove, the Solid beComes liquid [ liquid phase ]and the liquid becomes a gas in the bottom of the pan when the water boils, [ gaseous phase ] the bubbles coming up from the bottom are the instant phase change from liquid to gas, when the gas bubbles break the surface of the water and the gas comes into contact with the cooler air the gas instantly starts to condense to water droplets i.e. the vapour phase
You can see through the bubbles because h20 in its gaseous phase is invisible to the naked eye.
Gaseous h20 is hot dry and invisible
Vaporous h20 is warm wet and visible
Gaseous h20 is known as a condensing gas in physics because it condenses obviously, condensing gases are also known as optically active gases or radiatively active gases.
Hope this helps all the 3 phase numpties who think vapour i.e. water droplets is actually gas, it isnt or it wouldn’t be called vapour it would be called gas.
Liquid water has to reach its boiling point before it will phase change to its gaseous phase.
Vapor has to boil before the water droplets will phase change to a gaseous state, steam is not gas it is condensing gas i.e. vapour at a lower temperature than boiling point.
hope this helps have a nice day
A sample of gas has a volume of 12.0 L and a pressure of 2.00 ATM. If the pressure of gas is increased to6.00 ATM, what is the new volume of the gas
Answer:
4L
Explanation:
What is the molar mass of Mn2Se7 ?
A.) 601.34 g/mol
B.) 542.50 g/mol
C.) 662.60 g/mol
Answer:
C. 662.60
Explanation:
the mass of Mn is about 54 grams/mol, (multiply that by 2 since there are 2 Mn's).
the mass of Se is about 79 grams/mol, so multiply that by 7
if you add them, you get 662.60 (approxamitly)
Answer:
C) 662.60
Explanation:
~~55*2 + 79*7 = 110 + 553 = 663 (~~662.60)
if life had existed during thie won the fossils probably would not have survived because
Answer:
because life would have use fossil for their benefits.
Different substances have....
A.the same properties
B. different properties
C.similar properties
D.all properties
Answer:
Different properties
Explanation:
They are different.
What happens during high tide?
a.The tidal range is at its minimum in a location.
b.The tidal range is at its maximum in a location.
c.The water level in the ocean rises to above average water level.
D.The water level in the ocean drops to below average water level.
Answer: c
Explanation:
Plants and animals need to protect themselves to survive. Select the statement that best describes the adaptions of animals and plants.
Please help!!
The diagram shows the electron configuration of an atom of an element for the electrons in the s and p orbitals.
What is the group number of the element in the periodic table?
A) 1
B) 2
C) 13
D) 15
Answer:
15
Explanation:
because since the outer shell has 5 electron then add 5 and 10 to get 15
What is a dominant trait and a recessive trait
Answer:
Dominant traits are always expressed when the connected allele is dominant, even if only one copy exists. Recessive traits are expressed only if both the connected alleles are recessive.
Explanation:
Freckles, cleft chin and dimples are all examples of a dominant trait.
Write a nuclear equation for each description below.
Stronitum-84 combines with an alpha particle, creating sodium-25 and a daughter nucleus. 4 pts
Answer:
Sr-84 + He-2 -> Na-25 + Pm-61
Explanation:
Because the triple beam balance is zeroed before it is put into use, it measures
A.
volume
B.
weight
C.
the effects of gravity
D.
mass
is Tungsten carbide an elementary substance
or compound?
Answer:
Tungsten carbide (chemical formula: WC) is a chemical compound (specifically, a carbide) containing equal parts of tungsten and carbon atoms.
Answer:compound
Explanation:
Can you build a fire on the moon? Why or why not?
Answer:
No.
Explanation:
We can't build a fire on the moon, because moon's atmosphere lacks oxygen.
[tex] \huge \pink{answer}[/tex]
No lightning of a fire on the surface of the moon is impossible..
[tex] \huge \green {reasons - }[/tex]
surface of the moon lacks oxygen which is important for the formation of fire.Surface of the moon doesn't have wind which disables the fire to burn rapidly.how many periods are there in the modern periodic table of elements?
Answer:
There are seven periods in the modern periodic table.
Answer:
Seven periods
Explanation:
There are seven periods in the periodic table, with each one beginning at the far left. A new period begins when a new principal energy level begins filling with electrons. Period 1 has only two elements (hydrogen and helium), while periods 2 and 3 have 8 elements.
The greater the difference in EN (electronegativity) between the intramolecular bonding of two atoms, the bond will experience more ionic behavior. A. True b. False
Ammonia (NH3) dissolved in water is heated in a beaker. If initially there had been 60 grams dissolved in 100 grams of water, what would happen if the temperature reached 90℃ and why? A. The solution would become supersaturated and the ammonia would all remain dissolved . B. The solution would become saturated but the amount of ammonia dissolved would remain the same . C. about 50 more grams of ammonia would be able to dissolve as the solution has become unsaturated . D. about 50 grams of ammonia would come out of solution as the temperature caused the solubility to decrease .
Answer:
C. About 50 more grams ammonia would be able to dissolve as the solution has become unsaturated
Explanation:
From the question, we have;
The mass of ammonia dissolved in water = 60 grams
The mass of the water solvent which dissolves the ammonia = 100 g
The temperature to which the ammonia water solution is raised = 90°C
Therefore, given that the solubility of a solute in a solvent increases with temperature, when the temperature is raised, we have, that the solution will more unsaturated and will be able to dissolve more ammonia, therefore, option 'C' is the most correct option that corresponds with the relationship of temperature and solubility