What is the density of hydrogen sulfide (H2S) at 0.7 atm and 322 K?

Answers

Answer 1

Answer:

0.9g/L.

Explanation:

To calculate the density of hydrogen sulfide (H2S) at 0.7 atm and 322 K, we can use the ideal gas law:

PV = nRT

where P is the pressure in atmospheres (atm), V is the volume in liters (L), n is the number of moles of gas, R is the universal gas constant (0.08206 L·atm/(mol·K)), and T is the temperature in Kelvin (K).

We can rearrange this equation to solve for the number of moles of gas:

n = PV / RT

Next, we can use the molar mass of H2S (34.08 g/mol) to convert the number of moles to mass:

mass = n × molar mass

Finally, we can divide the mass by the volume to obtain the density:

density = mass/volume

Let's assume a volume of 1 L (since the volume is not given in the question). Then we have:

P = 0.7 atm

T = 322 K

R = 0.08206 L·atm/(mol·K)

molar mass of H2S = 34.08 g/mol

First, we calculate the number of moles of H2S using the ideal gas law:

n = PV / RT

n = (0.7 atm) (1 L) / (0.08206 L·atm/(mol·K) × 322 K)

n = 0.0265 mol

Next, we calculate the mass of H2S using the number of moles and the molar mass:

mass = n × molar mass

mass = 0.0265 mol × 34.08 g/mol

mass = 0.9 g

Finally, we calculate the density of H2S:

density = mass/volume

density = 0.9g/1 L

density = 0.9 g/L

Therefore, the density of hydrogen sulfide (H2S) at 0.7 atm and 322 K is approximately 0.9g/L.

Related Questions

a 1.25 g sample of co2 is contained in a 750. ml flask at 22.5 c. what is the pressure of the gas, in atm?

Answers

The pressure of gas is 1.05 atm when a 1.25 g sample of CO₂ is contained in a 750ml flask at 22.5°C.

Molecular weight of CO₂ is 1.25g ,Volume of CO₂ is 750ml,Temperature of CO₂ is 22.5°C and the gas constant is 0.08206 L atm/mol K.

Using the ideal gas law equation the pressure is found to be 1.05 atm.

To calculate the pressure of the gas, we can use the ideal gas law equation: [tex]PV=nRT[/tex]
Where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
First, we need to convert the volume to liters by dividing by 1000: 750 ml = 0.75 L.
Next, we need to calculate the number of moles of CO₂ present in the flask. We can use the molecular weight of CO₂ to convert from grams to moles:

[tex]1.25 * (1 /44.01 ) = 0.0284 mol[/tex]
Now we can plug in the values into the ideal gas law equation:

[tex]PV=nRT[/tex]
[tex]P * 0.75 L = 0.0284 mol * 0.08206 L*atm/mol*K * (22.5 + 273.15) K[/tex]
Simplifying and solving for P, we get:
[tex]P = (0.0284 * 0.08206 * 295.65) / 0.75 = 1.05 atm[/tex]
Therefore, the pressure of the gas in the flask is 1.05 atm.

Learn more about ideal gas law equation here:

https://brainly.com/question/15379358

#SPJ11

The cloud droplets in a cloud are formed by water vapor molecules and: A) protons. B) ions. C) molecules of air. D) condensation nuclei.

Answers

Answer:

condensation nuclei

Explanation:

PLEASE ANSWER ASAP
1. How many atoms are present in 8.500 mole of chlorine atoms?
2. Determine the mass (g) of 15.50 mole of oxygen.
3. Determine the number of moles of helium in 1.953 x 108 g of helium.
4. Calculate the number of atoms in 147.82 g of sulfur.
5. Determine the molar mass of Co.
6. Determine the formula mass of Ca3(PO4)2.
IT WOULD BE HELPFUL

Answers

1) 5.1167 x 10²⁴atoms of chlorine. 2) 248.00 g. 3) 4.8825 x 10⁷ moles of helium. 4) 2.7757 x 10²⁴ atoms of sulfur. 5) Molar mass of Co (cobalt) is 58.93 g/mol. 6) Formula mass = 310.18 g/mol.

What is meant by formula mass?

Sum of the atomic masses of all the atoms in chemical formula is called formula mass

1.) Number of atoms = 8.500 moles x 6.022 x 10²³ atoms/mole = 5.1167 x 10²⁴ atoms of chlorine.

2.) Molar mass of oxygen is 16.00 g/mol. Therefore:

Mass of 15.50 moles of oxygen = 15.50 moles x 16.00 g/mol = 248.00 g.

3.) Molar mass of helium is 4.00 g/mol. Therefore, the number of moles of helium in 1.953 x 10⁸ g is:

Number of moles = 1.953 x 10⁸ g / 4.00 g/mol = 4.8825 x 10⁷ moles of helium.

4.) Molar mass of sulfur is 32.06 g/mol. Therefore, the number of moles of sulfur in 147.82 g is:

Number of moles = 147.82 g / 32.06 g/mol = 4.6084 moles of sulfur.

To find the number of atoms, we can use Avogadro's number again:

Number of atoms = 4.6084 moles x 6.022 x 10²³ atoms/mole = 2.7757 x 10²⁴ atoms of sulfur.

5.) Molar mass of Co (cobalt) is 58.93 g/mol.

6.) Ca₃(PO₄)₂ contains 3 calcium atoms, 2 phosphorus atoms, and 8 oxygen atoms.

Atomic masses of these elements are:

Calcium (Ca) = 40.08 g/mol

Phosphorus (P) = 30.97 g/mol

Oxygen (O) = 16.00 g/mol

Therefore, formula mass of Ca₃(PO₄)₂ is:

Formula mass = (3 x 40.08 g/mol) + (2 x 30.97 g/mol) + (8 x 16.00 g/mol)

= 120.24 g/mol + 61.94 g/mol + 128.00 g/mol

= 310.18 g/mol.

To know more about formula mass, refer

https://brainly.com/question/21334167

#SPJ1

What is the concentration (in molality) of an aqueous solution of NaCl made by adding
4.56 g of NaCl to enough water to give 20.0 mL of solution. Assume the density of the
solution is 1.03 g/mL

Answers

Answer:

data given

mass of NaCl 4.56

dissolved volume 20ml(0.02l)

density of solution 1.03g/ml

Required molality

Explanation:

molarity=m/mr×v

where

m is mass

mr molar mass

v is volume

now,

molarity=4.56/58.5×0.02

molarity =3.9

: .molarity is 3.9mol/dm^3

According to molal concentration, the concentration (in molality) of an aqueous solution of NaCl is 0.0047 mole/kg.

What is molal concentration?

Molal concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molal concentration is moles/kg.

The molal concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molal concentration is calculated by the formula, molal concentration=mass/ molar mass ×1/mass of solvent in kg.

In terms of moles, it's formula is given as molal concentration= number of moles /mass of solvent in kg.

Substitution in formula gives the answer but first mass of solution is determined which is density×volume= 1.03×20=20.6 g , mass of solvent= 20.6-4.56=16.05, thus molal concentration=4.56/58.5×1/16.05=0.0047 moles/kg.

Learn more about molal concentration,here:

https://brainly.com/question/4580605

#SPJ2

how many moles of naf must be dissolved in 1.00 liter of a saturated solution of pbf2 at 25˚c to reduce the [pb2 ] to 1 x 10–6 molar? (ksp pbf2 at 25˚c = 4.0 x 10–8)

Answers

The moles of NaF that must be dissolved in 1.00 liter of a saturated solution of PbF₂ at 25˚C to reduce the [Pb²⁺] to 1 x 10⁻⁶ molar is 2.0 x 10⁻⁵.

The solubility product expression for PbF₂ is given by:

Ksp = [Pb²⁻][F-]²

At equilibrium, the product of the ion concentrations must be equal to the solubility product constant. We are given that the [Pb²⁺] in the saturated solution is 1 x 10⁻⁶ M. Therefore, we can use the Ksp expression to calculate the concentration of F- in the solution:

Ksp = [Pb²⁺][F⁻]²4.0 x 10⁻⁸ = (1 x 10⁻⁶)([F⁻]²)[F⁻]² = 4.0 x 10⁻²[F⁻] = 2.0 x 10⁻¹

Now, we can calculate the amount of NaF needed to reduce the [F⁻] concentration to 2.0 x 10⁻¹ M. Since NaF is a 1:1 electrolyte, the concentration of F- will be equal to the concentration of NaF added.

Number of moles of NaF = (2.0 x 10⁻¹) mol/L x 1.00 L = 2.0 x 10⁻¹ moles

However, we need to dissolve this amount of NaF in a saturated solution of PbF₂. Therefore, we need to check that the amount of NaF we added will not exceed the maximum amount that can dissolve in the solution at 25˚C.

To learn more about solubility, here

https://brainly.com/question/29661360

#SPJ4

consider the reaction performed in the sn1 lab. what would be the effect on the rate of the reaction if 2-propanol (isopropanol) was used instead of 2-methyl-2-propanol (t-butanol) assuming only an sn1 reaction occurs? group of answer choices the rate of the reaction would decrease, because the secondary carbocation is more difficult to form. the rate of the reaction would increase, because the secondary carbocation is easier to form. there would be no difference in reaction rate. the reaction would not proceed at all.

Answers

The rate of the reaction is directly proportional to the stability of the carbocation intermediate, and any changes in the solvent will affect the rate of the reaction.

In an SN1 reaction, the rate-determining step is the formation of a carbocation intermediate. The stability of the carbocation intermediate affects the rate of the reaction.

In this case, if 2-propanol (isopropanol) was used instead of 2-methyl-2-propanol (t-butanol), the rate of the reaction would decrease. This is because the carbocation intermediate formed in 2-propanol is less stable compared to the one formed in t-butanol.

The carbocation intermediate formed in t-butanol is tertiary, which is more stable than the one formed in isopropanol, which is secondary. This means that the reaction will be slower in isopropanol due to the less stable carbocation intermediate.

To learn more about : reaction

https://brainly.com/question/29470602

#SPJ11

Other Questions

in contrast to skinners more traditional approach, banduras theory maintains that instead of highly predatory behaviors i marketing channel relationships in the 21st-century, value chain relationships are characterized by: Find the area of a rectangle with length 4.3 cm and breadth 3.9 cm a/an ________ profile can be developed when a person registers on or buys something from a website. a. vertical b. statistical c. identified d. anonymous when a person speaks to an audience, they're not only appealing to the audience's mental process but also asking them to: Consider an American Call option with a Strike of $100 and aterm of 6 months at time 0.After 3 months the spot price is 105 and a dividend will be paidamounting to $1. The risk free rate is 5%.Sho uld this option be exercised at time 3 months after time 0?a) Not enough information to answer the questionb) Yesc) Indifferent between early exercise and holding to maturityd) No The sum of a number and three is no more than eight In triangle BC, point D is on AC such that AD = 12 and CD = 12. If angle ABC = angle BDC = 90 degrees, then what is BD? Which of these conditions is a respiratory disease caused by nicotine and tobacco use?leukemiatype 2 diabeteshigh blood pressurechronic obstructive pulmonary disease (COPD)myth Please help and hurry Kubin Companys relevant range of production is 25,000 to 33,500 units. When it produces and sells 29,250 units, its average costs per unit are as follows: Average Cost per Unit Direct materials $ 8. 50 Direct labor $ 5. 50 Variable manufacturing overhead $ 3. 00 Fixed manufacturing overhead $ 6. 50 Fixed selling expense $ 5. 00 Fixed administrative expense $ 4. 00 Sales commissions $ 2. 50 Variable administrative expense $ 2. 00 Required: 1. For financial accounting purposes, what is the total amount of product costs incurred to make 29,250 units? 2. For financial accounting purposes, what is the total amount of period costs incurred to sell 29,250 units? 3. For financial accounting purposes, what is the total amount of product costs incurred to make 33,500 units? 4. For financial accounting purposes, what is the total amount of period costs incurred to sell 25,000 units? (For all requirements, do not round intermediate calculations. )1. Total amount of product costs 2. Total amount of period costs incurred 3. Total amount of product costs 4. Total amount of period costs dylan is in default on her mortgage. she decides to hand over the deed to her property rather than face foreclosure proceedings. this is an example of . Suppose that one fixed and one variable input arc used to produce good X. As the marginal physical product of the variable input increases, the marginal cost. increases. decreases. remains constant. There is not enough information to answer the question. what comparative advantage does bengaluru (bangalore) have that enables it to attract domestic and foreign high-tech companies? The height distributions of two different classes at Dover elementary school are shown below both groups, have the same interquartile range how many times the third quartile range is the difference between the median height of the third grade class in the fourth grade class 1/4 1/2 two or four a magazine that targets specific industries is called a(n) _____ publication. in the acute phase of bipolar disorder, manic episode, which biopsychosocial need is the priority?a) psychologicalb) physicalc) intellectuald) relational what property of oric in e. coli allows the double-stranded dna to be more easily separated than the rest of the genome? select the correct answer. which of the following is a characteristic of pnf stretching? a. holding a stretch at the point of discomfort b. using a bouncing motion while stretching c. having a partner help you stretch by flexing and relaxing the muscle d. stretching by holding a position for 10-30 seconds 2. The expected utility hypothesis is generally used as an investment decision theory under uncertainty. Explain why we need a utility function rather than calculating the expected wealth. 3. Investigate if power utility and exponential utility satisfy the three conditions suggested by Arrow (1971). 4. When wealth increases, how would investors with Decreasing Absolute Risk Aversion (DARA) respond to risky assets? Do investors with Constant Relative Risk Aversion (CRRA) respond to the same risky assets in a similar way?