What is the energy transformation of these street lights with solar panels?

What Is The Energy Transformation Of These Street Lights With Solar Panels?

Answers

Answer 1
Solar LED street lights rely on the photovoltaic effect, which allows the solar cell to convert sunlight into usable electrical energy.

Related Questions

What is the MAIN idea of the section "Green Loses Its Power In Fall"?

Answers

B is the main answe becuase Keith mecruty dies in the American war by being shot

the work of warren washington would be most likely to explain which of the following phenomena

Answers

Answer:

t

Explanation:

A gradual shift of the North Magnetic Pole's position on Earth a steady rise in the planet's average temperature, a reduction in the Moon's light reflection.

What is the work of warren Washington?

Dr. Washington and his team were able to recreate the impacts of physics on several components of weather, such as “how heat energy, water vapor, and chemicals travel between Earth's seas and the atmosphere,”

Through the use of climate models. 3 After that, computers projected atmospheric changes using the information from the climate models.

The 2007 Intergovernmental Panel on Climate Change (IPCC) report, which found that human behavior has a direct impact on the environment, used these models to support its findings.

As a result, Dr. Washington and his team were awarded the 2007 Nobel Peace Prize3.

Therefore, a slow change in the location of Earth’s North Magnetic Pole A gradual increase in Earth’s average temperature A decrease in the light reflection of the Moon

Learn more about warren Washington here:

https://brainly.com/question/16562512

#SPJ2

If you push an 5 N object 2 m and then push a 10 N object 2 m. Which is TRUE?
You do the same amount of work.
You do more work when you move the 10 N object.
You are more powerful when you move the 5 N object
O You use the same amount of force.

Answers

Answer:

Explanation:

You don't do the same amount of work. The work formula is F*d = W

W = work

F = force

d = the distance moved.

So you do more work when you move the 10N object because the Force (F) has doubled.

A tourist stands at the top of the Grand Canyon, holding a rock, overlooking the valley
below. Find the final velocity, and displacement of the rock after 4.0 seconds give the three
initial conditions listed below.

Answers

Answer:

a. Vf = 39.24 [m/s]

b. Vf = 31.24 [m/s]

c. Vf = 47.24 [m/s]

Explanation:

To solve this problem we can use the following equation of kinematics. We have to keep in mind that the gravitational acceleration acts downwards, therefore when the rock falls towards the abyss it has the same direction of the acceleration and that is why the gravitational acceleration has a positive sign in the equation.

[tex]v_{f}=v_{o}+g*t[/tex]

where:

Vf = final velocity [m/s]

Vo = initial velocity = 0 (when the rock is dropped)

g = gravitational acceleration = 9.81 [m/s²]

t = time = 4 [s]

a.

[tex]v_{f}=0+9.81*4\\v_{f}= 39.24 [m/s][/tex]

b.

In this particular situation, the acceleration will be taken as negative because the gravity is pointing in the opposite direction of the movement of the rock.

[tex]v_{f}=8-(9.81*4)\\v_{f}=-31.24[m/s][/tex]

The negative sign in the answer tells us that the rock no longer moves up instead it does downwards when 4 seconds have passed.

c.

[tex]v_{f}=8+(9.81*4)\\v_{f}=47.24[m/s][/tex]

role play pokimon only

Answers

Answer:

huh

Explanation:

im so confused

Answer:

eevee

Explanation:

An object of mass m is traveling in a circle with centripetal force f c. If the velocity of the object is v, what is the radius of the circle?

Answers

Answer:

r = mv^2/ Fc

Explanation:

Got it right

Which of Earth's Layers is solid but still "bendable"?

Answers

Answer:

Mantlee

Explanation:

Which two elements would most likely form an ionic compound?

a
From the Periodic Table of Elements - #6 carbon and #8 oxygen
b
From the Periodic Table of Elements - #3 lithium and #9 fluorine
c
From the Periodic Table of Elements - #1 hydrogen and #7 nitrogen
d
From the Periodic Table of Elements - #5 boron and #10 neon

Answers

Answer:

boron and neon.

Explanation:

two element compounds are usually ionic when one element is a metal and the other is a non-metal. boron is a metal, whereas neon is a non-metal. i might be wrong but hope it helps.

If the magnitude of a vector is√8 .If it's x-component is 2 ,then it's y- component is

Answers

Answer:

The answer is below

Explanation:

A vector quantity is a quantity that has both magnitude and direction. The magnitude of a vector is the length of that vector.

The magnitude of a vector a with a x component of x and y component of y is given by the formula:

[tex]|a|=\sqrt{x^2+y^2}[/tex]

Given that the vector has a magnitude of √8, the x component is 2 and the y component = y. Hence:

[tex]\sqrt{8}=\sqrt{2^2+y^2}\\\\squaring\ both\ sides:\\\\8=4 + y^2\\\\y^2=8-4\\\\y^2=4\\\\square\ root\ of\ both\ sides:\\\\y=\sqrt{4} \\\\y=\pm 2\\\\y=+2\ or\ y=-2[/tex]

Which of the following BEST describes Jupiter's seasons?
O A.
There are no significant seasonal changes.
B.
The seasons are much like Earth's.
OC.
The seasons are much shorter than Earth's.
OD. The seasons are much longer than Earth's.


Answers

Answer:

Jupiter does not have changing seasons like the Earth, but instead is believed to have a constantly stormy atmosphere. This is partly due to its tilt, which is only 3 degrees. The planet has a very turbulent atmosphere and is believed to have a lot of long-term storms.

So the answer is  A : There are no significant seasonal changes.

Explanation:

what is the avarage speed during kick 1

Answers

is there answers to the problem ?

If an object has a weight of 4050 N near the surface of the Earth, what is its mass?

Answers

Answer:

417.5 kg

Explanation:

Since the gravitational for of attraction F, equals the weight of the object W when its close to the earth, F = GMm/R² = W = mg where m = mass of object and g = acceleration due to gravity close to the earth = 9.8 m/s².

g = GM/R² where  g = acceleration due to gravity close to the earth, G = universal gravitational constant = 6.67 × 10⁻¹¹ Nm²/kg², M = mass of earth = 5.927 × 10²⁴ kg and R = radius of earth = 6.4 × 10⁶ m

So, g = GM/R²

= 6.67 × 10⁻¹¹ Nm²/kg² × 5.927 × 10²⁴ kg/(6.4 × 10⁶ m)²

= 39.53 × 10¹³ Nm²/kg ÷ 40.96 × 10¹² m²

= 9.65 N/kg

≅ 9.7 N/kg

= 9.7 m/s²

Since W = 4050 N and W = mg

m = W/g = 4050 N/9.7 m/s²

= 417.53 kg

≅ 417.5 kg

So, the mass of the object is 417.5 kg

A truck weighs 500 N on Earth. What's the mass of the truck?
O 5 Kg
O 50 Kg
500 kg
500 N
PLEASE HURRY

Answers

The answer is 50 kg plz mark as brainliest

Answer:

Solution given:

Wight [W]=500N

gravity [g]=10m/s²

mass[m]=?

we have

W=mg

500=m*10

m=500/10

m=50kg

the mass of the truck is 50kg.

HELP ASAP!!!!!!! PLEASE WILL GIVE BRAINLIEST

Name the three major parts of a cell and their functions

Answers

Answer:

Cell Membrane (Plasma Membrane)

Cytoplasm.

Nucleus.

Explanation:

The cytoplasm is home to many activities of the cell as it contains molecules, enzymes that are crucial in the break down of the waste. The cytoplasm also assists in metabolic activities. Cytoplasm provides shape to the cell. It fills up the cells thus enabling the organelles to remain in their position.

The plasma membrane, or the cell membrane, provides protection for a cell. It also provides a fixed environment inside the cell. And that membrane has several different functions. One is to transport nutrients into the cell and also to transport toxic substances out of the cell.

The nucleus controls and regulates the activities of the cell (e.g., growth and metabolism) and carries the genes, structures that contain the hereditary information. Nucleoli are small bodies often seen within the nucleus.

an object has a weight on the surface of the earth of 370 N. What is the mass

Answers

Explanation:

The mass of the object is 370N / (9.81N/kg) = 37.7kg.

How much force would be needed to
push a 22 kg box across the floor with
an acceleration of 1.9 m/s^2? Assume
that there is a coefficient of friction of.
17 between the box and the floor.
Help me with this!!!!!!!it’s due in 10 minutes

Answers

There would be two forces acting on the box parallel to the floor, with a net force of

F = p - f = m a

where p = magnitude of the push, f = mag. of friction, m = mass of the box, and a = acceleration. To find p, we first need f .

There are also only two forces acting on the box perpendicular to the floor, with net force

F = n - w = 0

where n = mag. of normal force of the floor on the box and w = weight of the box. The net force is 0 because the box is only accelerating parallel to the floor.

w = m g, where g = 9.8 m/s² is the mag. of the acceleration due to gravity, so we can solve for n :

n = w = m g

n = (22 kg) (9.8 m/s²)

n = 215.6 N

The kinetic friction is proportional to the normal force by a factor of the given coefficient of friction, µ = 0.17, such that

f = µ n

f = 0.17 (215.6 N)

f = 36.652 N

Now solve for the required pushing force:

p - 36.652 N = (22 kg) (1.9 m/s²)

p ≈ 78 N

Answer:

0

Explanation:

N in-ground swimming pool has the dimensions shown in the drawing. It is filled with water to a uniform depth of 3.00 m. The density of water = 1.00 × 103 kg/m3. What is the total pressure exerted on the bottom of the swimming pool? 1.97 × 105 Pa 2.49 × 105 Pa 2.94 × 104 Pa 1.80 × 105 Pa 1.31 × 105 Pa

Answers

Answer:

The pressure is  [tex]P = 1.31*10^{5} \ Pa[/tex]

Explanation:

From the question we are told that

    The depth of the swimming pool is  [tex]d = 3.00 \ m[/tex]

     The density of water is  [tex]\rho = 1.00*10^{3} \ kg /m^3[/tex]

Generally the  total pressure exerted on the bottom of the swimming pool is mathematically represented as

          [tex]P = P_o + \rho * g * h[/tex]

Here [tex]P_o[/tex] is the atmospheric pressure with value

        [tex]P_o = 101325 \ Pa[/tex]

So

        [tex]P = 101325 + [1000 * 9.8 * 3][/tex]

=>     [tex]P = 130725 \ Pa[/tex]

=>    [tex]P = 1.31*10^{5} \ Pa[/tex]

     

What is a joule? Pls only answer if you know the answer.

Answers

Answer:

the SI unit of work or energy, equal to the work done by a force of one newton when its point of application moves one meter in the direction of action of the force, equivalent to one 3600th of a watt-hour.

Explanation:

Joule, unit of work or energy in the International System of Units (SI); it is equal to the work done by a force of one newton acting through one metre. Named in honour of the English physicist James Prescott Joule, it equals 107 ergs, or approximately 0.7377 foot-pounds.

Difference between rest and motion?

Answers

Answer:

Rest and motion are relative terms. In simple terms, an object that changes its position is said to be in motion while the opposite action causes an object to be at rest.

Explanation:

how can 23.78 x 10 to the power of negative 6 metre cube per mole changed to meter cube?​

Answers

Answer:

We multiply [tex]x = 23.78\times 10^{-6}\,\frac{m^{3}}{mol}[/tex] by the amount of mole to change units to cubic meters.

Explanation:

Let [tex]x = 23.78\times 10^{-6}\,\frac{m^{3}}{mol}[/tex], we change the unit to cubic meters by multiplying this number by the amount of moles of the sample. For instance, let [tex]n = 1\,mol[/tex], then the obtain the following result:

[tex]m = x\cdot n[/tex] (1)

[tex]m = \left(23.78\times 10^{-6}\,\frac{m^{3}}{mol} \right)\cdot (1\,mol)[/tex]

[tex]m = 23.78\times 10^{-6}\,m^{3}[/tex]

An 800 kHz radio signal is detected at a point 3.2 km distant from a transmitter tower. The electric field amplitude of the signal at that point is 320 mV/m. Assume that the signal power is radiated uniformly in all directions and that radio waves incident upon the ground are completely absorbed. The magnetic field amplitude of the signal at that point, in nT, is closest to:

Answers

Answer:

1.07 nT

Explanation:

We know that E/B = c where E = electric field amplitude = 320 mV/m = 0.32 V/m, B = magnetic field amplitude and c = speed of light = 3 × 10⁸ m/s.

So, B = E/c

Substituting E and c into B, we have

B = E/c

= 0.32 V/m ÷ 3 × 10⁸ m/s

= 0.1067 × 10⁻⁸ T

= 1.067 × 10⁻⁹ T

= 1.067 nT

≅ 1.07 nT

Which of the four spheres is this pictures/scene?

A) hydrosphere
B) biosphere
C) geosphere
D) atmosphere

Answers

Answer:

I Believe the answer is

[tex]D. \: \: atmosphere[/tex]

Explanation:

I hope how this helps!

Explain how the shape of a river's stream bed can affect the river's speed and its power to cause erosion.

Answers

The shape of a river's stream bed affects the speed and eroding power of a river by influencing the amount of friction between the water flowing through the river and the stream bed below. Friction is the force that opposes the motion of one surface as it moves across another surface. In a river, there is friction between the flowing water and the stream bed beneath it. Where a river is deep, less water comes into contact with the stream bed, so there is less friction. The reduced friction means there is less opposition to the water's motion, so the river flows at a greater speed and has more kinetic energy for erosion. On the other hand, where a river is shallow, more water comes into contact with the stream bed, so there is more friction. The increased friction means there is more opposition to the water's motion, so the river flows at a lesser speed and has less kinetic energy for erosion. Also, the roughness of a stream bed covered with boulders and other obstacles causes the water to flow through the river in a turbulent fashion. This could cause the river to move slower in some cases or erode more in other cases.

Answer:

Possiable answer by edge:

The shape of a river’s stream bed affects the speed and eroding power of a river by influencing the amount of friction between the water flowing through the river and the stream bed below. Friction is the force that opposes the motion of one surface as it moves across another surface. In a river, there is friction between the flowing water and the stream bed beneath it. Where a river is deep, less water comes into contact with the stream bed, so there is less friction. The reduced friction means there is less opposition to the water’s motion, so the river flows at a greater speed and has more kinetic energy for erosion. On the other hand, where a river is shallow, more water comes into contact with the stream bed, so there is more friction. The increased friction means there is more opposition to the water’s motion, so the river flows at a lesser speed and has less kinetic energy for erosion. Also, the roughness of a stream bed covered with boulders and other obstacles causes the water to flow through the river in a turbulent fashion. This could cause the river to move slower in some cases or erode more in other cases.

Explanation:

summary of answer:

influencing the amount of friction between the water flowing through the river and the stream bed below.

What voltage is required to move 6A through 20?

Answers

Answer:

120V

Explanation:

Given parameters:

Current  = 6A

Resistance  = 20Ω

Unknown:

Voltage = ?

Solution:

According to ohms law;

           V = IR

Where V is the voltage

            I is the current

            R is the resistance

Now, insert the parameters and solve;

    V  = 6 x 20  = 120V

Mr. Davis is riding his bike at a speed of 5 meters per second for 3600 seconds how far did he ride?

Answers

Answer:18,000 meters

Explanation:3600x5=18,000.

An airplane flies at 40 m/s at an altitude of 50 meters. The pilot drops a heavy package which falls to the ground. Where, approximately, does the package land relative to the plane's new position

Answers

Answer:

128 m

Explanation:

From the question given above, the following data were obtained:

Horizontal velocity (u) = 40 m/s

Height (h) = 50 m

Acceleration due to gravity (g) = 9.8 m/s²

Horizontal distance (s) =?

Next, we shall determine the time taken for the package to get to the ground.

This can be obtained as follow:

Height (h) = 50 m

Acceleration due to gravity (g) = 9.8 m/s²

Time (t) =?

h = ½gt²

50 = ½ × 9.8 × t²

50 = 4.9 × t²

Divide both side by 4.9

t² = 50 / 4.9

t² = 10.2

Take the square root of both side

t = √10.2

t = 3.2 s

Finally, we shall determine where the package lands by calculating the horizontal distance travelled by the package after being dropped from the plane. This can be obtained as follow:

Horizontal velocity (u) = 40 m/s

Time (t) = 3.2 s

Horizontal distance (s) =?

s = ut

s = 40 × 3.2

s = 128 m

Therefore, the package will land at 128 m relative to the plane

PLEASE HELP ASAP!!!

Bradley is installing fencing on a farm. As he is installing the fencing, he moves 65.0 meters directly south, then turns, and goes 44.0 meters at an angle 25.0° east of south, where he finishes his work shift. What is his final displacement vector at the end of his shift??

a. 107m, 10.1°, east of south

b. 107m, 10.1° south of east

c. 121m, 14.1° south of east

d. 121m, 14.1° east of south

Answers

Answer:

The correct option is;

a. 107 m, 10.1°, east of south

Explanation:

The given question can be answered using vectors as follows;

The initial displacement south by Bradley = 65.0 meters

In vector form, we have

The initial displacement south by Bradley = -65·j

The displacement 25.0° east of south = 44.0 meters

In vector form, we have

The displacement 25.0° east of south = 44 × sin(25°)·i - 44 × cos(25°)·j

In vector, form, we have;

The total displacement = The sum of the vectors of the two displacement

∴ The total displacement = -65·j + 44 × sin(25°)·i - 44 × cos(25°)·j

The total displacement = 44 × sin(25°)·i - (44 × cos(25°) + 65)·j

We use the i and j components to find the magnitude and the direction of the total displacement as follows;

The magnitude of the total displacement = √((44 × sin(25°))² + (44 × cos(25°) + 65)²) = 106.5132881 ≈ 107

The magnitude of the total displacement ≈ 107 m

The direction of the total displacement = arctan((44 × sin(25°))/((44 × cos(25°) + 65)) = 10.0542797419° ≈ 10.1° east of south

What current in a solenoid 15-cm long wound with 100 turns would produce a magnetic field equal to that of the Earth, 5 cross times 10 to the power of negative 5 end exponentT ?

Answers

Answer:

The value is  [tex]I= 0.0597\ A[/tex]  

Explanation:

From the question we are told that

    The length of the solenoid is [tex]l = 15 \ cm = 0.15 \ m[/tex]

     The number of turns is  [tex]N = 100[/tex]

      The  magnetic field of the earth is  [tex]B = 5* 10^{-5} \ T[/tex]

Gnerally magnetic field is mathematically represented as

          [tex]B = \frac{\mu_o * N * I }{ l }[/tex]

=>        [tex]I= \frac{Bl}{ \mu_o *N }[/tex]

=>        [tex]I= \frac{ 5 *10^{-5} * 0.15}{4\pi *10^{-7} *100 }[/tex]  

=>        [tex]I= 0.0597\ A[/tex]  

Compare the rate of heat transfer by radiation for two objects, the first one has the temperature Ts1= 25 degree Celsius and the second is kept at temperature Ts2 = 40 degree Celsius. Suppose they are made of identical material (e1=e2) and have the same area participating in radiation (Ar1=Ar2). The Surrounding temperature Tr= 25 degree Celsius.

Answers

Answer:

The rate of heat transfer of the second object is greater than the first object.

Explanation:

[tex]\varepsilon[/tex] = Emissivity of the object

[tex]\sigma[/tex] = Stefan-Boltzmann constant = [tex]5.67\times 10^{-8}\ \text{W/m}^2/\text{K}^4[/tex]

[tex]T_1[/tex] = Temperature of surface 1 = [tex]25^{\circ}\text{C}+273.15=298.15\ \text{K}[/tex]

[tex]T_2[/tex] = Temperature of surface 2 = [tex]40^{\circ}\text{C}+273.15=313.15\ \text{K}[/tex]

[tex]T_0[/tex] = Surrounding temperature = [tex]25^{\circ}\text{C}+273.15=298.15\ \text{K}[/tex]

Rate of heat transfer is given by

[tex]P_1=\varepsilon \sigma (T_1^4-T_0^4)\\\Rightarrow P_1=\varepsilon \sigma A_1(298.15^4-298.15^4)\\\Rightarrow P_1=0\ \text{W}[/tex]

[tex]P_2=\varepsilon \sigma (T_2^4-T_0^4)\\\Rightarrow P_2=\varepsilon 5.67\times10^{-8} A_2(313.15^4-298.15^4)\\\Rightarrow P_2=\varepsilon A_297.2[/tex]

[tex]\varepsilon A_297.2>0[/tex]

So, [tex]P_2>P_1[/tex]

Hence, the rate of heat transfer of the second object is greater than the first object.

1Which of the following components of blood would you expect to see in higher
numbers at a site of infection?
a. Red Blood Cells
b. White Blood Cells
C. Platelets
d. Plasma

Answers

white blood cells(b) :)
Other Questions
What does Kevin Kosar mean when he says, "One of the reasons we're able to get through this is that the post office is still operating"? Based on the passage, what does Reggie's response reveal about Georgia's actions throughout the passage? What is causing the Hot Springs to be so hot? What is causing Hot Springs to be so acidic? Find the resultant vector pf A - B where A = (9, 3) and B = (2, 4). A) (7, 7) B) (7, 1) C) (7, -7) D) (7,-1) which statement is true about figure A and figure A'? which of the following structures help guide the articulating bones?A) Articular cartilage B) menisci C) BursaeD) Ligaments please help me !!!!!!!!!!!!!!!!!!!!!!!! The U.S. President is elected by the electoral college, not by the popular vote. So, a president can be elected when he/she has fewer votes than his/her opponent. Is this consistent with the notion of "government by the people"? Would the space in between 2 transversals be an interior angle? what do you understand by valency electron and valency shell? what is the bill for 10 day rental b = 45.95d + 38.5 If a crocodile encountered a pod of dolphins in the sea, what would happen? Find f(2) If f(x) = (x + 1)2. An automobile assembly line operation has a scheduled mean completion time, , of minutes. The standard deviation of completion times is minutes. It is claimed that, under new management, the mean completion time has decreased. To test this claim, a random sample of completion times under new management was taken. The sample had a mean of minutes. Assume that the population is normally distributed. Can we support, at the level of significance, the claim that the mean completion time has decreased under new management Write a haiku about cold weather Ill MAKE YOU BRANLIEST Which action best demonstrates openness? keeping strong feelings to oneself knowing oneself and what one wantssharing an important experience in ones lifearguing over differences of opinion What is a 'choral octavo ? O A. a music book OB. a Catholic song book Oc. a musical score for many people D. a large roll of sheet music Kayla won 37 super bouncy balls playing hoops at her school's game night Later, she gave two to each of her friends. She only has 7 remaining. How many friends does she have? Read the article "Make a Change: Alternatives to Plastic Straws": Plastic is ruining the environment. Every year, 300 million tons of plastic are discarded in America, more than 8 million tons of which end up in the ocean. Over half of plastic waste is single-use plastic items such as bags, bottles, and food containers. Americans use 35 billion plastic water bottles a year. Similarly, over 1 million plastic bags are used every minute worldwide. These wasteful products are choking landfills and polluting waters. They should be, and can be, replaced with more environmentally friendly alternatives. A good example of a plastic item that should be replaced is the plastic straw. 500 million straws are used and discarded each year in America. That is enough straws to wrap around the whole of the Earth two-and-a-half times! Straws are, for the most part, completely unnecessary. Only a small number of people with certain medical conditions need straws for drinking. The rest of the population does not need straws. They simply have become accustomed to using them. Alternatives are available, but which one is best? Natural Alternatives Materials such as paper, straw, and bamboo are natural and biodegradable. They can also be used to make environmentally friendly drinking straws. Straws made from natural materials will decompose much more easily. They can be thrown in with food waste and composted. They are also relatively easy to find in stores and are inexpensive to buy. However, there are some drawbacks. Paper straws can quickly turn to mush when submerged in liquid. Likewise, drinking straws made from straw are not as strong as plastic and can tear easily. This makes both of these alternatives non-reusable. While bamboo is a more robust material, it too can only be reused a limited number of times. Bamboo must be responsibly sourced, as well, making it a more expensive option. Straw grass is similarly costly to use. Human-Made Alternatives Biodegradable plastics are now available and are used in many products, including straws. These plastics can decompose naturally in as little as 12 weeks. Unlike more natural alternatives, these straws look and feel the same as plastic straws. They are also stronger than natural products and can be easily mass-produced. Similar to natural straw alternatives, though, they are more expensive than plastic. They also must be disposed of properly (with food waste) or they will not fully decompose. Metal straws are another human-made alternative to plastic. Metal is very durable, which means that straws made from this material are long-lasting. They are more expensive to buy, but because they are reusable, they are actually cheaper in the long run. Glass straws are another alternative and offer many of the same benefits as metal straws. Both are dishwasher-safe and highly reusable. Unlike metal, however, glass can break easily, which is something that needs to be taken into account. Nevertheless, glass straws often feature unique designs that can be seen as works of art, which is a plus for some consumers. There are many alternatives to plastic straws currently on the market. While each one has its benefits and drawbacks, any of them would be a better choice than harmful plastic. On the other hand, going straw-less would be even better! How does the author's choice of words or phrases influence what the reader thinks about the topic in the article? The author uses phrases like "same benefits," "some drawbacks," and "many alternatives" to show while there are still positives and negatives to the alternatives, they are still better than plastic. The author uses phrases like "unique designs," "easily mass-produced," and "stronger than natural products" to show that plastic straws have many benefits compared to other materials. The author uses words like "drawbacks," "unlike," and "harmful" to create a negative feeling about the alternatives to making plastic straws, showing plastic is still the better option. The author uses words like "metal," "glass," "plastic," and "bamboo" to show the reader there is hope towards finding the best materials to use when producing straws. (30 points) Ahhhhhhh can someone help me :')) I'm not smart and I don't understand how to solve this problem:Octane, one of the major components of gasoline, burns in air according to this unbalanced equation:CH (l) + O (g) ----> CO (g) +HOThe formula balanced is: 2 CH (l) + 50 O (g) ----> 16 CO (g) + 18 HOa) What volume of O at STP is needed to burn 702g (1.00L) of octane?b) What volume of O at 18C and 0.975 atm is needed to burn 702g of octane?