What is the freezing point of an aqueous solution that boils at 105.9 ∘C? Express your answer using two significant figures.

Answer:

[tex]r_{NH_3,abs} =6.00\frac{M}{s}[/tex]

Explanation:

Hello,

In this case, we can write the law of mass action for the undergoing chemical reaction, based on the rates and the stoichiometric coefficients:

[tex]\frac{1}{-2}r_{NH_3} =\frac{1}{1} r_{N_2}=\frac{1}{3}r_{H_2}[/tex]

In such a way, knowing the rate of formation hydrogen (H₂), we can know the  rate of change of ammonia, that must be negative for consumption:

[tex]r_{NH_3} =\frac{-2}{3}r_{H_2}=\frac{-2}{3}*9.00\frac{M}{s} \\\\r_{NH_3} =-6.00\frac{M}{s}[/tex]

Nevertheless, the absolute magnitude will be positive:

[tex]r_{NH_3,abs} =6.00\frac{M}{s}[/tex]

Best regards.

Answer:

[tex]\Delta _cH=-1328.3kJ/mol[/tex]

Explanation:

Helllo,

In this case, for the given chemical reaction in gaseous state:

[tex]CH_3OCH_3+3O_2\rightarrow 2CO_2+3H_2O[/tex]

We comoute the combustion enthalpy as the reaction enthalpy for one mole of fuel (dimethyl ether) considering the formation enthalpy of each given substance and whether they are reactants (subtracting) or products (adding), therefore we write:

[tex]\Delta _cH=2*\Delta _fH_{CO_2}+3*\Delta _fH_{H_2O}-\Delta _fH_{CH_3OCH_3}-3*\Delta _fH_{O_2}[/tex]

Whereas the formation enthalpies for carbon dioxide, water, dimethyl ether and oxygen are -393.5, -241.8, -184.1 and 0 kJ/mol respectively, thereby, the combustion enthalpy turns out:

[tex]\Delta _cH=2(-393.5)+3*(-241.8)-(-184.1)-3(0)\\\\\Delta _cH=-1328.3kJ/mol[/tex]

Notice that enthalpy of formation of oxygen is zero since forming an element has no chemical sense, it just exists as it has been early demonstrated.

Regards.

Answer:

Edge length of the unit cell is 4.07x10⁻¹⁰m

Explanation:

In a face-centered cubic structure, the edge, a, could be obtained using pythagoras theorem knowing the hypotenuse of the unit cell, b, is equal to 4r:

a² + a² = b² = (4r)²

2a² = 16r²

a = √8 r

That means edge lenght is = √8 r

adius

As radius of Silver is 144pm = 144x10⁻¹²m:

a = √8 r

a = √8 ₓ 144x10⁻¹²m

a = 4.07x10⁻¹⁰m

Answer:

1a. 0.89 gcm¯³

1b. Yes.

1c. Tetrahydrofuran.

2. 0.54 g/mL

Explanation:

1. Data obtained from the question include:

Volume = 0.988 L = 988 cm³

Mass = 879 g

1a. Determination of the density

Density = mass /volume

Density = 879/ 988

Density = 0.89 gcm¯³

Therefore, the density of the liquid is 0.89 gcm¯³

1b. From the given data, it is possible to determine the identity of the liquid.

1c. The density of the liquid is 0.89 gcm¯³. Comparing the density of the liquid obtained with those given in the table, the liquid is tetrahydrofuran

2. Data obtained from the question include:

Mass of empty cylinder = 5.25 g

Mass of cylinder and sodium thiosulfate = 75.82 g

Volume = 130.63 mL

Next, we shall determine the mass of sodium thiosulfate. This can be obtain as follow:

Mass of empty cylinder = 5.25 g

Mass of cylinder and sodium thiosulfate = 75.82 g

Mass of sodium thiosulfate =.?

Mass of sodium thiosulfate = Mass of cylinder and sodium thiosulfate – Mass of empty cylinder

Mass of sodium thiosulfate = 75.82 – 5.25

Mass of sodium thiosulfate = 70.57 g

Finally, we shall determine the concentration of the sodium thiosulfate as follow:

Mass = 70.57 g

Volume = 130.63 mL

Concentration =?

Concentration = mass /volume

Concentration = 70.57/130.63

Concentration = 0.54 g/mL

The concentration of the solution is 0.54 g/mL

Answer:

0.109 mol/tablespoon

Explanation:

6.37 g/ 58.5 mol = 0.10888888 mol (0.109 significantly)

Answer:

A: 0.109

Explanation:

Edge 2020

Answer:

Copper (II) chloride.

Explanation:

Hello,

In this case, considering the described reaction which is also given as:

[tex]2Al + 3CuCl_2 \rightarrow 2AlCl_3 + 3Cu[/tex]

For us to identify the limiting reactant we first compute the available moles of aluminium:

[tex]n_{Al}=512gAl*\frac{1molAl}{27gAl}=19.0molAl[/tex]

Next, we compute the consumed moles of aluminium by the 1147 grams of copper (II) chloride by using their 2:3 molar ratio:

[tex]n_{Al}^{consumed}=1147gCuCl_2*\frac{1molCuCl_2}{134.45gCuCl_2}*\frac{2molAl}{3molCuCl_2} =5.69molAl[/tex]

Thereby, we can infer aluminium is in excess since less moles are consumed than available whereas the copper (II) chloride is the limiting reactant.

Best regards.

Considering the definition of bond and the different type of bonds, valence is not one of  the types of bonds.

A chemical bond is defined as the force by which the atoms of a compound are held together. These are electromagnetic forces that give rise to different types of chemical bonds.

In other words, a chemical bond is the force that joins atoms to form chemical compounds and confers stability to the resulting compound.

The covalent bond is the chemical bond between atoms where electrons are shared, forming a molecule. Covalent bonds are established between non-metallic elements, such as hydrogen H, oxygen O and chlorine Cl. These elements have many electrons in their outermost level (valence electrons) and have a tendency to gain electrons to acquire the stability of the electronic structure of noble gas. The shared electron pair is common to the two atoms and holds them together.

An ionic bond is produced between metallic and non-metallic atoms, where electrons are completely transferred from one atom to another. During this process, one atom loses electrons and another one gains them, forming ions.

Metallic bonds are a type of chemical bond that occurs only between atoms of the same metallic element. In this way, metals achieve extremely compact, solid and resistant molecular structures, since the atoms that share their valence electrons.

In summary, valence is not one of  the types of bonds. The types of bonds are covalent, ionic and metallic.

Learn more about chemical bonds:

https://brainly.com/question/25385832

https://brainly.com/question/13178368

#SPJ1

Answer:

[tex]C_{base}=0.302M[/tex]

Explanation:

Hello,

In this case, we can evidence that when calcium hydroxide solution reacts with hydrochloric acid solution, the balanced neutralization reaction turns out:

[tex]2HCl(aq)+Ca(OH)_2\rightarrow CaCl_2(aq)+2H_2O(l)[/tex]

Moreover, the concentration of neutralized calcium hydroxide can be computed by using the 2:1 mole ratio between the base and the acid:

[tex]C_{acid}V_{acid}=2*C_{base}V_{base}\\\\C_{base}=\frac{C_{acid}V_{acid}}{2*V_{base}} =\frac{0.225M*26.85mL}{2*10.0mL}\\ \\C_{base}=0.302M[/tex]

Regards.

Answer:

i. n = 5

ii. ΔE = 7.61 × [tex]10^{-46}[/tex] KJ/mole

Explanation:

1. ΔE = (1/λ) = -2.178 × [tex]10^{-18}[/tex]([tex]\frac{1}{n^{2}_{final} }[/tex] - [tex]\frac{1}{n^{2}_{initial} }[/tex])

    (1/434 × [tex]10^{-9}[/tex]) = -2.178 × [tex]10^{-18}[/tex] ([tex]\frac{n^{2}_{initial} - n^{2}_{final} }{n^{2}_{final} n^{2}_{initial} }[/tex])

⇒ 434 × [tex]10^{-9}[/tex] = (1/-2.178 × [tex]10^{-18}[/tex])[tex]\frac{n^{2}_{final} *n^{2}_{initial} }{n^{2}_{initial} - n^{2}_{final} }[/tex]

But, [tex]n_{final}[/tex] = 2

434 × [tex]10^{-9}[/tex] = (1/2.178 × [tex]10^{-18}[/tex])[tex]\frac{2^{2} n^{2}_{initial} }{n^{2}_{initial} - 2^{2} }[/tex]

434 × [tex]10^{-9}[/tex]  × 2.178 × [tex]10^{-18}[/tex] = [tex](\frac{4n^{2}_{initial} }{n^{2}_{initial} - 4 })[/tex]

⇒ [tex]n_{initial}[/tex] = 5

Therefore, the initial energy level where transition occurred is from 5.

2. ΔE = hf

     = (hc) ÷ λ

    = (6.626 × 10−34 × 3.0 × [tex]10^{8}[/tex] ) ÷ (434 × [tex]10^{-9}[/tex])

    = (1.9878 × [tex]10^{-25}[/tex]) ÷ (434 × [tex]10^{-9}[/tex])

    = 4.58 × [tex]10^{-19}[/tex] J

    = 4.58 × [tex]10^{-22}[/tex] KJ

But 1 mole = 6.02×[tex]10^{23}[/tex], then;

energy in KJ/mole = (4.58 × [tex]10^{-22}[/tex] KJ) ÷ (6.02×[tex]10^{23}[/tex])

         = 7.61 × [tex]10^{-46}[/tex] KJ/mole

The initial energy level is 5  and the energy of this transition in units of kJ/mole is 7.57 * 10^-43 kJ/mole

We must first calculate ΔE as follows;

ΔE = hc/λ

h = Plank's constant = 6.6 * 10^-34 Js

c = speed of light = 3 * 10^8 m/s

λ = wavelength = 434 * 10^-9

ΔE =  6.6 * 10^-34 * 3 * 10^8/434 * 10^-9

ΔE = 0.0456 * 10^-17 J

ΔE = [tex]ΔE = -2.178 x10^-18 (\frac{1}{n^2final} - \frac{1}{n^2initial}) \\ΔE = -2.178 x10^-18 (\frac{1}{2^2} - \frac{1}{n^2initial} )\\\\4.56 * 10^-19/2.178 x10^-18 = (\frac{1}{2^2} - \frac{1}{n^2initial})\\0.210 = (\frac{1}{2^2} - \frac{1}{n^2initial})\\\frac{1}{n^2initial} = 0.25 - 0.210\\\frac{1}{n^2final} = 0.04\\n = (\sqrt{(0.04)^-1} \\n = 5[/tex]

Energy of this transition in units of kJ/mole = 4.56 * 10^-19/ 6.02 * 10^23

= 7.57 * 10^-43 kJ/mole

Learn more; https://brainly.com/question/5295294

Answer:

Cooking a pot of soup

Explanation:

id say that because when you freeze ice cream, its already frozen, so no heat is being released. melting ice wouldn't be the answer because, once again, it is already frozen, and no heat is being released.

Answer:

the correct answer is freezing ice cream

Explanation:

i took the test & got this question correct. also, heat energy is released when freezing because there is no heat energy involved.

Answer:

The answer to your question is given below

Explanation:

The balanced equation for the reaction is given below:

CaO(s) + CH4(g) + 2H2O(g) <=> CaCO3(s) + 4H2(g)

1. Writing an expression for the equilibrium constant, K.

The equilibrium constant, K for a reaction is simply the ratio of the concentration of the products raised to their coefficient to the concentration of the reactants raised to their coefficient.

Thus, we can write the equilibrium constant, K for the reaction as follow:

CaO(s) + CH4(g) + 2H2O(g) <=> CaCO3(s) + 4H2(g)

K = [CaCO3] [H2]⁴ / [CaO] [CH4] [H2O]²

2. Based on the value of K, more products will be in the equilibrium mixture since the value of K is a positive large number.

Answer:

2. Due to the possession of resonance

Explanation:

In the benzene ring, the electrons that results in the bonds between the carbon atoms are delocalized. That is, they do not belong to a specific carbon atom. It is this unique feature that enables them to have a bond length between single and double bond lengths.

This feature is as a result of resonance.

The correct option is 2.

Answer:

See explanation.

Explanation:

Hello,

In this case, we can show how the empirical formula is found by following the shown below procedure:

1. Compute the moles of carbon in carbon dioxide as the only source of carbon at the products:

[tex]n_C=0.01962molCO_2*\frac{1molC}{1molCO_2} =0.01962molC[/tex]

2. Compute the moles of hydrogen in water as the only source of hydrogen at the products:

[tex]n_H=0.01961molH_2O*\frac{2molH}{1molH_2O}=0.03922molH[/tex]

3. Compute the mass of oxygen by subtracting the mass of both carbon and hydrogen from the 0.4647-g sample:

[tex]m_O=0.4647g-0.01962molC*\frac{12gC}{1molC}-0.03922molH*\frac{1gH}{1molH} =0.1900gO[/tex]

4. Compute the moles of oxygen by using its molar mass:

[tex]n_O=0.1900gO*\frac{1molO}{16gO}=0.01188molO[/tex]

5. Divide the moles of carbon, hydrogen and oxygen by the moles of oxygen (smallest one) to find the subscripts in the empirical formula:

[tex]C=\frac{0.01962}{0.01188}=1.65\\ \\H=\frac{0.03922}{0.01188} =3.3\\\\O=\frac{0.01188}{0.01188} =1[/tex]

6. Search for the closest whole number (in this case multiply by 2):

[tex]C_3H_6O_2[/tex]

Moreover, the empirical formula suggests this compound could be carboxylic acid since it has two oxygen atoms, nevertheless, this is not true since the molar mass is 222.27 g/mol, therefore, we should compute the molar mass of the empirical formula, that is:

[tex]M=12*3+1*6+16*2=74g/mol[/tex]

Which is about three times in the molecular formula, for that reason, the actual formula is:

[tex]C_9H_{18}O_6[/tex]

It suggest that the compound has a highly oxidizing character due to the presence of oxygen, therefore, we cannot predict the distribution of the functional groups as it could contain, carboxyl, carbonyl, hydroxyl or even peroxi.

Best regards.

Answer:

Explanation: M(PCL5)= 31 + 5(35.5)

=208.5g/mol

M(H20)= 18g/mol

n(PCL5) = 75.5÷208.5

= 0.362mol

n(HCl)/n(PCL5)= 5/1

n(HCl)= 5×0.362

=1.81mol of HCl

Answer:

1) R₃CO , H, H₃C, a carbon free radical

2) high temperature, ultraviolet irradiation

Explanation:

1) Homolysis leads to the formation of free radicals (species having a free electron). Thus, answer is :

R₃CO

H

H₃C

a carbon free radical

2) Homolysis require high temperature, ultraviolet irradiation.

Answer:

Option C. Will always.

Explanation:

A spontaneous reaction is a reaction that occurs without an external supply of heat.

This implies that spontaneous reaction will always occur as no external supply of heat is needed.

Answer:

Hope this helps...

Good luck on your assignment...

Answer:

(a)

Explanation:

Hello,

In this case, the temperature required to boil argon, it means, transform it from liquid to gas is -197 °C. In such a way, since the temperature inside the steel sphere is -190 °C, which is greater than the boiling point, we realize argon is gaseous, therefore, the molecules will be spread inside the sphere as they will be moving based on the kinetic theory of gases.

For that reason, answer is scheme (a).

Best regards.

Answer:

the answer is monerans

Explanation:

When Carl Woese developed the modern system of classification, he broke the previous kingdom of Monera into the two kingdoms of Bacteria and Archaea.

Some biologists believed it made sense to classify prokaryotes as belonging to their own kingdom, the Monera. That served as the foundation for Richard Whittaker  and Lynn Margulis's five-kingdom proposal, which enhanced the Haeckel plan by include a kingdom of fungus.

Protists, protozoa, monera, fungi, and viruses have long been proposed as belonging to different kingdoms, but traditional evolutionists during the majority of the 20th century had given none of them any thought.

Later, the Monera kingdom was split into Eubacteria and Archaebacteria by Carl Woese .  Moreover, he divided the five kingdoms into three domains: Eukaryotes, Archaea, and Bacteria.

Find more on Kingdom Monera:

https://brainly.com/question/30621598

#SPJ3

Your question is incomplete. But your complete question is as follows:

When Carl Woese developed the modern system of classification, he broke the previous kingdom of into the two kingdoms of  _____  into  Bacteria and Archaea.

Answer:

483.27 minutes

Explanation:

using second faradays law of electrolysis

Answer:

1.22 × 10³ g

Explanation:

Step 1: Write the balanced equation

P₄O₁₀ + 6 H₂O ⇒ 4 H₃PO₄

Step 2: Calculate the moles of H₃PO₄ produced by 3.10 moles of P₄O₁₀

The molar ratio of P₄O₁₀ to H₃PO₄ is 1:4. The moles of H₃PO₄ produced are 4/1 × 3.10 mol = 12.4 mol

Step 3: Calculate the mass corresponding to 12.4 moles of H₃PO₄

The molar mass of H₃PO₄ is 97.99 g/mol.

[tex]12.4 mol \times \frac{97.99g}{mol} = 1.22 \times 10^{3} g[/tex]

Answer:

pH = 7.29

Explanation:

Ka of butanoic acid is 1.54x10⁻⁵

To obtain the pH of the solution you must use H-H equation for butanoic acid:

pH = pKa + log₁₀ [C₃H₇COO⁻] / [C₃H₇COOH]

Where pKa is defined as -log Ka = 4.81

Now, you need to find [C₃H₇COO⁻] and [C₃H₇COOH] concentrations (Also, you can find moles of each substance and replace them in the equation.

Butanoic acid reacts with LiOH, producing C₃H₇COO⁻, thus:

C₃H₇COOH + LiOH → C₃H₇COO⁻ + H₂O + Li⁺

Moles of both reactants, C₃H₇COOH and LiOH are:

C₃H₇COOH = 0.0300L ₓ (0.1000mol / L) = 0.003000moles of C₃H₇COOH

LiOH = 0.0299L ₓ (0.1000mol / L) = 0.00299 moles of LiOH.

That means moles of C₃H₇COO⁻ produced are 0.00299 moles.

And moles of C₃H₇COOH that remains in solution are:

0.00300 - 0.00299 = 0.00001 moles of C₃H₇COOH

Replacing in H-H equation:

pH = pKa + log₁₀ [C₃H₇COO⁻] / [C₃H₇COOH]

pH = 4.81 + log₁₀ [0.00299moles] / [0.00001moles]

Answer:

the density if vinegar will also be needed

Explanation:

Because this is an experiment of volumetric analysis

D. The name for the set of independent and dependent variables that will be controlled by the scientist.

The statement, that describes the ‘control’ in an experiment is "the name for the set of independent and dependent variables that will be controlled by the scientist."

A control is an element in an experiment that remains intact or unaffected by other variables. An experiment or observation aiming to minimise the influence of variables other than the independent variable is referred to as a scientific control. It serves as a standard or point of reference against which other test findings are measured.

In a scientific experiment, an independent variable is the variable that is modified or manipulated in order to assess the effects on the dependent variable. In a scientific experiment, the dependent variable is the variable that is being tested and measured. The designation given to the set of independent and dependent variables that the scientist will regulate.

Hence the correct option is D.

Learn more about control in an experiment here

https://brainly.in/question/19374703

#SJP3

Answer:

0.025 M

Explanation:

The following data were obtained from the question:

Initial volume (V1) = 5 mL

Initial concentration (C1) = 0.5 M

Final volume (V2) = 100 mL

Final concentration (C2) =..?

Using the dilution formula, we can obtain the final concentration of the diluted solution as follow:

C1V1 = C2V2

0.5 x 5 = C2 x 100

Divide both side by 100

C2 = (0.5 x 5)/100

C2 = 0.025 M

Therefore, the final concentration of the diluted solution is 0.025 M

The concentration of the final diluted solution is 0.025M

The dilution formula is expressed according to the formula:

[tex]C_1V_1=C_2V_2[/tex]

Given the following parameters

[tex]C_1=0.5M\\V_1=5.00mL\\V_2=100.0mL\\C_2=?[/tex]

Substitute the given parameters into the formula:

[tex]C_1V_1=C_2V_2\\0.5(5)=100C_2\\2.5=100C_2\\C_2=\frac{2.5}{100}\\C_2= 0.025M[/tex]

Hence the concentration of the final diluted solution is 0.025M

Learn more here: https://brainly.com/question/6103588

Answer:

2ErF3 + 3Mg → 2Er + 3MgF2

Explanation:

Erbium metal is a member of the lanthaniod series. It reacts with halogens directly to yield erbium III halides such as erbium III chloride, Erbium III fluoride etc.

Erbium metal (Er) can be prepared by reacting erbium(III) fluoride with magnesium; the products are erbium metal and magnesium fluoride. This is a normal redox process in which the Erbium metal is reduced while the magnesium is oxidized. The balanced reaction equation of this process is; 2ErF3 + 3Mg → 2Er + 3MgF2

Answer:

The colour of the orange solution becomes yellow.  

Explanation:

1. Before adding NaOH

Assume the picture showed a beaker of potassium chromate and one of potassium dichromate.

Both solutions are involved in the same equilibrium:

[tex]\rm\underbrace{\hbox{2CrO$_{4}^{2-}$(aq)}}_{\text{yellow}} +2H^{+}(aq) \rightleftharpoons \, \underbrace{\hbox{Cr$_{2}$O$_{7}^{2-}$}}_{\text{orange}} + H_{2}O[/tex]

The first beaker contains mostly chromate ions with a few dichromate ions.

The position of equilibrium lies to the left and the solution is yellow.

The second beaker contains mostly dichromate ions with a few chromate ions.

The position of equilibrium lies to the right and the solution is orange.

2. After adding NaOH

According to Le Châtelier's Principle, when we apply a stress to a system at equilibrium, the system will respond in a way that tends to relieve the stress.

Beaker 1

If you add OH⁻ to the equilibrium solution, it removes the H⁺ (by forming water).

The system responds by having the dichromate react with water to replace the H⁺.  

At the same time, the system forms more of the yellow chromate ion.

The position of equilibrium shifts to the left.

However, the solution is already yellow, so you see no change in colour.

Beaker 2

The reaction is the same as in Beaker 1.

This time, however, as the dichromate ion disappears, do does its orange colour.

Also, the yellow chromate is being formed and its yellow colour appears .

The colour changes from orange to yellow.

Answer:

[tex]n_S=1.076molS[/tex]

Explanation:

Hello,

In this case, given the undergoing chemical reaction, we can see a 4:3 mole ratio between the consumed moles of gallium and sulfur respectively, therefore, the consumed moles of sulfur, from the 100.0 g of gallium (use its atomic mass) turn out:

[tex]n_{S}=100.0gGa*\frac{1molGa}{69.72gGa}*\frac{3molS}{4molS} \\\\n_S=1.076molS[/tex]

Best regards.

Answer:

H₂(g) + Cu²⁺(aq) → 2H⁺(aq) + Cu(s)

Explanation:

In a redox reaction, one half-reaction is the oxidation (where the atom loss electrons) whereas the other reaction is the reduction (Where the atom is gaining electrons.

In the reactions:

H₂(g) → 2H⁺(aq) + 2e⁻ oxidation

Here, the reaction is written as the oxidation because the hydrogen H₂ is in oxidation state 0 and H⁺ in +1. That means each atom is loosing one electron.

Cu²⁺(aq) + 2e⁻ → Cu(s) reduction

And here, the Cu²⁺ is in +2 oxidation state and after the reaction is in Cu(s) 0 state. Thus, each atom is gaining 2 electrons.

The sum of both reactions is:

H₂(g) + Cu²⁺(aq) + 2e⁻ → 2H⁺(aq) + 2e⁻ + Cu(s)

Subtracting the electrons in both sides of the reaction:

Answer:

Q = 1.5 kJ

Explanation:

It is given that,

The specific heat for aluminum is 0.900 J/g°C

Mass of sample, m = 3.8 g

Initial temperature, [tex]T_i=450^{\circ} C[/tex]

Final temperature, [tex]T_f=25^{\circ} C[/tex]

We need to find the heat released. The amount of heat released is given by the formula:

[tex]Q=mc\Delta T\\\\Q=mc(T_f-T_i)\\\\Q=3.8\times 0.9\times (25-450)\\\\Q=1453.5\ J\\\\Q=1.45\ kJ[/tex]

or

[tex]Q=1.5\ kJ[/tex]

So, the correct option is (A) i.e. 1.5 kJ.