what is the percent composition of calcium fluoride

Answer:

Wind energy

Explanation:

An ideal source of energy needs to be reliable, cost effective, safe and must lead to almost zero adverse environmental impact.

Wind energy is energy obtained from air moving at high velocity. This energy is harvested using windmills which convert mechanical energy to electrical energy.

Wind is inexpensive because it occurs naturally. However, a large expanse of land is required in order to mount sufficient number of windmills that will generate enough electrical energy for practical purposes.

This method of electricity generation is safe and does not lead to any environmental hazard unlike the burning of fossil fuels, use of nuclear energy or loss of habitat due to hydroelectric power generation.

V = 3.9 L

Explanation:

Given:

T = 23°C + 273 = 296K

n = 0.16 mol He

P = 101 kPa = 0.997 atm

R = universal gas constant = 0.08205 L-atm/mol-K

V = ?

Using the ideal gas law,

PV = nRT

V = nRT/P

= (0.16 mil He)(0.08205 L-atm/mol-K)(296K)/(0.997 atm)

= 3.9 L

Answer: 2.20 g Pb

They gave us the masses of two reactants and asked us to determine the mass of the product. We will need a chemical equation with masses and molar masses, so, let's gather all the information in one place.

Mᵣ:       239.27   32.00        207.2

           2PbS   +   3O₂   ⟶  2Pb   +   2SO₃

m/g:      2.54        1.88

Answer:

A. As pressure decreases, the concentration of gas molecules in the solution increases.

D. The solubility of nitrogen gas at 2.00 atm is twice the solubility of the gas at 1.00 atm.

F. More gas molecules are soluble as pressure is increased.

The solubility is 188.3 mg of N2 gas/100 g water.

Explanation:

As the pressure on the gas decreases, the volume of gas molecules in the solution increases due to having distance from each other. The solubility of nitrogen gas at 2.00 atm is twice the solubility of the gas at 1.00 atm because there is more pressure on the gas molecules so due to more compression, the gas becomes more soluble. More gas molecules are soluble as pressure is increased. The solubility is 188.3 mg of N2 gas/100 g water if the atmospheric pressure is increases from 3.08 atm to 8.00 atm. This value is calculated with the help of formula i.e. P2/P1 = S2/S1.

Answer:the final mass of copper is  3.84 g. There was an increase in mass of 1.84 g from the initial mass of 2.0 g.

Explanation:

Answer:

9 moles of NaNO3 is obtained

Explanation:

The balanced chemical reaction equation for the reaction is;

Al(NO3)3 + 3NaCl-------> 3NaNO3 + AlCl3

Now, we have to determine the limiting reactant. The limiting reactant yields the least amount of NaNO3.

1 mole of Al(NO3)3 yields 3 moles of NaNO3

4 moles of Al(NO3)3 yields 4 * 3/1 = 12 moles of NaNO3

Also,

3 moles of NaCl yields 3 moles of NaNO3

9 moles of NaCl yields 9 * 3/3 = 9 moles of NaNO3

Hence, NaCl  is the limiting reactant and 9 moles of NaNO3 is obtained.

9 moles of NaNO₃ is obtained.

[tex]Al(NO_3)_3 + 3NaCl-----> 3NaNO_3 + AlCl_3[/tex]

From the reaction, it is seen that the limiting reactant yields the least amount of NaNO₃.

1 mole of Al(NO₃)₃ yields 3 moles of NaNO₃

4 moles of Al(NO₃)₃ yields 4 * 3/1 = 12 moles of NaNO₃

Also,

3 moles of NaCl yields 3 moles of NaNO₃

9 moles of NaCl yields 9 * 3/3 = 9 moles of NaNO₃

Hence, NaCl  is the limiting reactant and 9 moles of NaNO₃ is obtained.

Find more information about Balanced chemical reaction here:

brainly.com/question/15355912

Answer:

Amount of iron fillings in mixture = 60 mg

Explanation:

Given:

Total mass of mixture = 100 mg

Amount of salt in mixture = 10 mg

Amount of sand in mixture = 30 mg

Find:

Amount of iron fillings in mixture

Computation:

Using Law of Conservation of mass;

Total mass of mixture = Amount of salt in mixture + Amount of sand in mixture + Amount of iron fillings in mixture

100 = 10 + 30 + Amount of iron fillings in mixture

100 = 40 + Amount of iron fillings in mixture

Amount of iron fillings in mixture = 100 - 40

Amount of iron fillings in mixture = 60 mg

Answer:

[tex]V_2=27.87L[/tex]

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to solve this problem by using the Charles' law a directly proportional relationship to understand the volume-temperature behavior:

[tex]\frac{V_2}{T_2} =\frac{V_1}{T_1}[/tex]

Thus, we solve for the final volume, V2, and make sure the temperature are in Kelvin as shown below:

[tex]V_2 =\frac{V_1T_2}{T_1} \\\\V_2=\frac{26.42L(92+273.15)K}{(73+273.15)K} \\\\V_2=27.87L[/tex]

Regards!

Answer:

Start your streak by answering any question. You'll get bonus points from day 2.

Answer:

6

Explanation:

lol

[tex]1) \: decomposition[/tex]

[tex]2) \:hydrocarbon \: combustion[/tex]

[tex]3) \: formation[/tex]

[tex]4) \: double - replacement[/tex]

[tex]5 \: double - replacement[/tex]

[tex]6) \: formation[/tex]

[tex]7)double \: - replacement[/tex]

[tex]8) \: double - replacement[/tex]

Answer:

2-pentanone.

Explanation:

Hello there!

In this case, for the given compound and, in agreement with the octet rule, it is possible to realize that the CO is actually C=O as shown below:

CH3  -  C  -  CH2  -  CH2  -  CH3

            ||

           O

Thus, since the C=O stands for the carbonyl group within the parent chain, we infer this is a ketone and more specifically 2-pentanone as it has five carbon atoms.

Regards!

Answer:

What is

the volume of the balloon when the temperature is 310K?

Explanation:

2x²=8

x²=8/2

x=√4

x=2

hope it helps.

Answer:

[tex]\huge \fbox \pink {A}\huge \fbox \green {n}\huge \fbox \blue {s}\huge \fbox \red {w}\huge \fbox \purple {e}\huge \fbox \orange {r}[/tex]

[tex] {2x}^{2} = 8 \\ {x}^{2} = \frac{8}{2} \\ {x}^{2} = 4 \\ x = \sqrt{4} \\ x = 2[/tex]

ʰᵒᵖᵉ ⁱᵗ ʰᵉˡᵖˢ

[tex] \huge\purple{ \mid{ \underline{ \overline{ \tt ꧁❣ ʀᴀɪɴʙᴏᴡˢᵃˡᵗ2²2² ࿐ }} \mid}}[/tex]

Answer:

C

Explanation:

increasing the temperature will favour the forward reaction therefore the reaction system will try to counteract that by producing more heat and NO2 therefore increases the amount of products produced

increasing the pressure will favour the forward reaction as it has more moles of substance therefore if the forward reaction is favored, more product will be produced

Answer:

C.) lV and V

Explanation:

I got it correct on founders edtell

Answer:

[tex]T_2=400.73K[/tex]

Explanation:

From the question we are told that:

Activation energy [tex]E_a= 51.02 kJ/mol.=>51.02*10^3J/mol[/tex]

Reaction Ratio [tex]\triangle K=4.50[/tex]

Initial Temperature [tex]T_1=365K[/tex]

Generally the equation for Final Temperature [tex]T_2[/tex] is mathematically given by

 [tex]log \triangle K=\frac{E_a}{2.303R}*(\frac{T_2-T_1}{T_1T_2})[/tex]

Where

 [tex]R=Gas constant[/tex]

 [tex]R =8.3143[/tex]

Therefore

 [tex]log 4.50=\frac{51.2*10^3}{2.303*8.31432}*(\frac{T_2-365}{365*T_2})[/tex]

 [tex]log 4.50=7.328*\frac{T_2-365}{T_2}[/tex]

 [tex]0.0892=\frac{T_2-365}{T_2}[/tex]

 [tex]0.0892T_2=T_2-365[/tex]

 [tex]365=T_2-0.0892T_2[/tex]

 [tex]365=0.91T_2[/tex]

 [tex]T_2=\frac{365}{0.91}[/tex]

 [tex]T_2=400.73K[/tex]

Answer:

2. Full

Explanation:

A lunar eclipse occurs at a full moon when Earth is directly between the moon and the sun. During a lunar eclipse, Earth blocks sunlight from reaching the moon.

Hope this helps!!

Answer:

The answer is B

Brainliest please!

Answer:

Option a. Benzenecarbonitrile

Explanation:

You are not providing the picture of the compound. However, I manage to find the picture of it, so I'm gonna answer this with the picture. Its attached here at the end.

As for the IUPAC name of this compound, it would be Benzenecarbonitrile, or simply, benzonitrile.

This compound has the molecular formula C₆H₅CN. It receives this name over the other ones, because this is a aromatic cyanide, and aromatic cyanide has nitriles behavior, (Strength of the nitrogen over the carbon), therefore, this group has priority over the whole molecule. As the principal chain is the benzene, the carbonitrile is the radical of the group, and when cyano groups are as radical and not as principal chains, it has a behavior of nitrile, and it's named as nitrile. therefore, option b, cannot be the name.

phenylcyanide is naming the phenyl as radical, but the benzene is the principal group in this compound, and the cyanide is the radical. It happens the same thing with cyanophenyl.

Hope this helps

Answer:

0.0123 mol

Explanation:

Step 1: Convert 34.0 °C to Kelvin

We will use the following expression.

K = °C + 273.15 = 34.0 + 273.15 = 307.2 K

Step 2: Convert 148 cm³ to L

We will use the conversion factors:

[tex]148cm^{3} \times \frac{1mL}{1cm^{3}} \times \frac{1L}{1000mL} = 0.148L[/tex]

Step 3: Convert 212 kPa to atm

We will use the conversion factor 1 atm = 101.325 kPa.

212 kPa × 1 atm / 101.325 kPa = 2.09 atm

Step 4: Calculate the moles of nitrogen gas

We will use the ideal gas equation.

P × V = n × R × T

n = P × V / R × T

n = 2.09 atm × 0.148 L / (0.0821 atm.L/mol.K) × 307.2 K = 0.0123 mol

Answer:

B. It undergoes a physical change.

Explanation:

Hello there!

In this case, since we know that chemical changes lead to the formation of new atoms and/or compounds due to the bonds rearrangement of the initial substances and the physical changes occur without changing the composition of the initial substances, we can infer that, since melting is a process that changes the phase of matter from solid to liquid without changing the identity of the initial substance, the answer to this question would be B. It undergoes a physical change. because the other options describe chemical changes.

Best regards!

Answer:

B. It undergoes a physical change.

Explanation:

At room temperature, the iron atoms are in an unusual loosely packed open arrangement; as iron is heated past 912 degrees Celsius, the atoms become more closely packed before loosening again at 1,394 degrees Celsius and ultimately melting at 1,538 degrees Celsius.

Answer:

B. The mass is greater after the reaction because the number of

atoms increases.

Answer:

The answer is "2%"

Explanation:

Equation:

[tex]HNO_2\ (aq) \leftrightharpoons H^{+} \ (aq) + NO_2^{-}\ (aq) \\\\\ K_a = 4.0\times \ 10^{-4}[/tex]

[tex]H^{+}=?[/tex]

Formula:

[tex]Ka = \frac{[H^{+}][NO_2^{-}]}{[HNO_2]}[/tex]

Let

[tex][H^{+}] = [NO_2^{-}] = x[/tex] at equilibrium

[tex]x^2 = (4.0\times 10^{-4})\times 1.0\\\\x = ((4.0\times 10^{-4})\times 1.0)^{0.5} = 2.0 \times 10^{-2} \ M\\\\[/tex]

therefore,

[tex][H^{+}] = 2.0\times 10^{-2} \ M = 0.02 \ M[/tex]

Calculating the % ionization:

[tex]= \frac{([H^{+}]}{[HNO_2])} \times 100 \\\\= \frac{0.02}{1}\times 100 \\\\= 2\%\\\\[/tex]

The approximate percent ionization of HNO₂ in a 1.0 M HNO₂ (aq) solution is 2%.

% ionization of any compound will be calculated as follow:

% ionization = ([ion]/[acid or base]) ₓ 100

Given chemical reaction with ICE table will be represented as:

                           HNO₂(aq) → H⁺(aq) + NO₂⁻(aq)

initial                          1                0             0

change                      -x               +x           +x

equilibrium              1-x                x             x

Equilibrium constant will be represented as:
Ka = [H⁺][NO₂⁻] / [HNO₂]

Acid dissociation constant for HNO₂ = 4×10⁻⁴

Putting all values in the above equation, we get

4×10⁻⁴ = x² / 1-x

Value of changeable quantity is very less, so we neglect from the concentration of HNO₂.

4×10⁻⁴ = x²

x = 2 × 10⁻²

So, the concentration of H⁺ ion = 2 × 10⁻²M

Now we put all these values in the % ionization equation, we get

% ionization = (0.02/1) × 100 = 2%

Hence , % ionization is 2%.

To know more about % ionization, visit the below link:
https://brainly.com/question/12198017

Answer:

3

Explanation:

Increasing concentration

Explanation:

a)

[tex]k _{sp} = [Ag {}^{ + } ][Cl {}^{ - } ] \\ but \: [Ag {}^{ + } ] = [Cl {}^{ - } ] \\ k _{sp} = [Ag {}^{ + } ] {}^{2} \\ [Ag {}^{ + } ] = \sqrt{k _{sp}} \\ = \sqrt{1.8 \times {10}^{ - 10} } \\ = 1.34 \times {10}^{ - 5} mol {dm}^{ - 3} [/tex]

b)

It has not reached equilibrium because the silver concentration is not yet equal to the value of Ksp.

c)

Yes it will dissolve in order to establish the equilibrium.

Answer:

2.35x10²³ molecules of C2Cl4 are present

Explanation:

To solve this question we must convert, as first, the mass of C2Cl4 to moles using its molar mass (C2Cl4 = 165.83g/mol). Then, using Avogadro's number we can find the number of molecules:

Moles C2Cl4:

73.1g * (1mol / 165.83g) = 0.441 moles C2Cl4

Molecules:

0.441 moles C2Cl4 * (6.022x10²³molecules / 1mol) =

Answer:

Meaning, Advantages & Disadvantages of - Osmosis, Multiflash Distillatiob

Explanation:

Advantages - It assists equalising concentration of solute on two sides of membrane. Reverse Osmosis is used for efficient water softening, it is easy to maintain.

Disadvantages - It needs a lot of energy. A lot of pressure is required for deionisation. Water acidity level increases, as minerals get deionised.

Advantages - Its Cost efficient , distillation uses waste heat. It has High gain output ratio. Quality of feedwater is less significant, compared to reverse osmosis.

Disadvantages - It has high operating cost in case of waste heat unavailability. High temperature imply high corrosion & scale formation.