What is the receiving body of the force?

Cause: Human population grows worldwide.

Effect: Fossil fuels burn, cities become more industrialized, glaciers melt, climates change, and rain falls in unusual amounts.

Global warming refers to the long-term increase in Earth's average surface temperature, primarily due to the increasing levels of greenhouse gases, such as carbon dioxide, in the atmosphere. These gases trap heat from the sun, preventing it from radiating back into space and causing the Earth's temperature to rise.

Global warming has a range of potential impacts, including rising sea levels, more frequent and severe heat waves, changes in precipitation patterns, and more intense storms. It is considered one of the most significant and pressing environmental challenges facing the planet today.

Find out more on global warming here: https://brainly.com/question/3553382

#SPJ1

The proton experiences an acceleration of [tex]$6.60\times10^{10} \text{m/s}^2$[/tex] in a uniform electric field of 691 N/C, and it takes [tex]$3.48\times10^{-5}$[/tex] s to reach a velocity of [tex]$2.30\times10^{6}$[/tex] m/s. During this time, the proton travels a distance of [tex]$4.36\times10^{-10}$[/tex] m and has a kinetic energy of [tex]$3.07\times10^{-12}$[/tex] J.

(a) The magnitude of the acceleration experienced by the proton can be determined by using the equation for the force on a charged particle in an electric field, which is F = qE, where F is the force, q is the charge of the particle, and E is the electric field strength. For a proton, the charge is equal to the fundamental charge, which is [tex]$1.602\times10^{-19} \text{C}$[/tex]. Therefore, the force on the proton is [tex]$F = (1.602\times10^{-19} \text{C})(691 \text{N/C}) = 1.106\times10^{-16} \text{N}$[/tex]

The acceleration of the proton can be determined using the equation F = ma, where m is the mass of the proton. Thus, [tex]$a = F/m = \dfrac{1.106\times10^{-16} \text{N}}{1.6726\times10^{-27} \text{kg}} = 6.60\times10^{10} \text{m/s}^2$[/tex].

(b) To find the time it takes for the proton to reach the given speed, we can use the kinematic equation v = u + at, where u is the initial velocity (which is 0 m/s), v is the final velocity ([tex]$2.30\times10^{6} \text{m/s}$[/tex]), a is the acceleration ([tex]$6.60\times10^{10} \text{m/s}^2$[/tex]), and t is the time. Rearranging this equation gives [tex]$t = \dfrac{v-u}{a} = \dfrac{2.30\times10^{6} \text{m/s}}{6.60\times10^{10} \text{m/s}^2} = 3.48\times10^{-5} \text{s}$[/tex].

(c) The distance the proton has moved in this time interval can be calculated using the kinematic equation [tex]$s = ut + \dfrac{1}{2}at^2$[/tex], where s is the distance traveled. Substituting the known values, we get [tex]$s = \dfrac{1}{2}(6.60\times10^{10} \text{m/s}^2)(3.48\times10^{-5} \text{s})^2 = 4.36\times10^{-10} \text{m}$[/tex]

(d) The kinetic energy of the proton can be calculated using the equation [tex]$KE = \dfrac{1}{2}mv^2$[/tex], where KE is the kinetic energy, m is the mass of the proton, and v is the velocity of the proton. Substituting the known values, we get [tex]$KE = \dfrac{1}{2}(1.6726\times10^{-27} \text{kg})(2.30\times10^{6} \text{m/s})^2 = 3.07\times10^{-12} \text{J}$[/tex].

To learn more about acceleration

https://brainly.com/question/12550364

#SPJ4

The distribution of cones at the point of image formation is crucial in resolving two point sources

To resolve two point sources, a distribution of cones must occur where the image strikes the retina. Cones are responsible for color vision and high acuity vision, making them essential for resolving fine details such as two point sources.

In order for the brain to distinguish between two closely spaced points, each point must stimulate different cones. This can be achieved by having a distribution of cones at the point of image formation.

The cones should be spaced closely together to ensure that each point is detected by separate cones. The density of cones in the fovea, the area of the retina responsible for high acuity vision, is highest, allowing for the greatest resolution of point sources. .

To learn more about : distribution

https://brainly.com/question/28027633

#SPJ11

The amount of energy that must be removed from 0.811 kg of water to cool it from 91°C to 15°C is approximately 61.636 kcal.

To calculate the change in energy for this process, we will use the specific heat capacity of water and the equation:

[tex]Q = m . c .[/tex]ΔT

where:
Q = change in energy (in kcal).
m = mass of water (in kg).
c = specific heat capacity of water (in kcal/kg°C).
ΔT = change in temperature (in °C).

The specific heat capacity of water is approximately 1 kcal/kg°C.

Therefore, 61.636 kcal of energy must be removed from 0.811 kg of water to cool it from 91°C to 15°C.

Learn more about the amount of energy that must be absorbed or lost to raise or lower the temperature, at: https://brainly.com/question/29418076

#SPJ11

In the illustration, a gas from I to F. The energy contributed to the gas through heat is 474 J when the gas moves along the diagonal line from I to F.

In physics, what is heat?

In thermodynamics, heat is energy that, in some way besides through labor or the movement of matter, spontaneously flows between a system and the surroundings. Heat transfers naturally from a warmer to a cooler body when an appropriate physical pathway is present.

What category does heat fit into?

Based on this, heat is divided into two categories: hot and cold. We encounter heat energy everywhere, including in icebergs, earthquakes, and our own bodies. There is heat energy in all matter. Heat energy is the only thing that results from the movement of microscopic particles called as atoms, atoms, or ions in fluids, solids, and gases.

To know more about heat visit:

https://brainly.com/question/30909810

#SPJ1

Maxwell's equations are a complete description of electric and magnetic fields. There are four equations in Maxwell's equations. These four equations are:

1. Gauss's Law for Electric Fields: Describes the relationship between electric charges and the electric field produced by them.
2. Gauss's Law for Magnetic Fields: States that there are no magnetic monopoles, and the magnetic field lines are always closed loops.
3. Faraday's Law of Electromagnetic Induction: Describes the induced electromotive force (EMF) in a closed circuit produced by a changing magnetic field.
4. Ampere's Law with Maxwell's Addition: Relates the magnetic field around a closed loop to the electric current passing through the loop and the rate of change of the electric field.

These four equations collectively provide a comprehensive description of electric and magnetic fields and their interactions.

To know more about Ampere's Law with Maxwell's Addition:

https://brainly.com/question/29831953

#SPJ11

Roadblock advertising".refers to a method for scheduling media in which the airwaves (both cable and network tv channels) are flooded to make it virtually impossible to miss the ads.

The term you are looking for is "roadblock advertising". It is a method of scheduling media where an advertisement is broadcasted on multiple channels simultaneously, aiming to reach a large audience in a short period.

This strategy can create a "roadblock" effect, as the ads dominate all available time slots across different channels, making it difficult for viewers to avoid them. While it can be an effective way to ensure a high frequency of exposure, it can also be seen as intrusive and annoying to some viewers, leading to a backlash against the advertiser.

Learn more about Roadblock advertising

https://brainly.com/question/29842268

#SPJ4

Roadblocking refers to a method for scheduling media in which the airwaves (both cable and network TV channels) are flooded to make it virtually impossible to miss the ads.

Roadblocking is a technique used in advertising where a particular advertisement is broadcast simultaneously across all available media channels, such as television, radio, and the Internet, in order to reach the maximum possible audience.

In the context of television advertising, roadblocking involves buying up all available ad slots across multiple networks or channels at the same time, so that viewers are exposed to the same ad multiple times in a short period of time. This can be an effective way to create a sense of urgency and increase the impact of an advertising campaign.

However, roadblocking can also be seen as a controversial tactic, as it can be perceived as intrusive and annoying to viewers who feel bombarded by the same ad repeatedly. It can also be expensive for advertisers, as they must pay a premium to secure all available ad slots at the same time.

To learn more about broadcast, refer:-

https://brainly.com/question/7352892

#SPJ11

The largest x-ray wavelength that can be diffracted by crystal planes with a separation of 0.316 nm is 0.632 nm.

To find the largest X-ray wavelength that can be diffracted by crystal planes with a separation of 0.316 nm, we can use Bragg's Law:

nλ = 2d sinθ

where n is an integer representing the order of diffraction, λ is the wavelength, d is the separation between crystal planes (0.316 nm), and θ is the angle of incidence. To find the largest possible wavelength, we need to consider the lowest order of diffraction (n = 1) and the maximum angle of incidence (θ = 90°).

Now we can plug in the values and solve for λ:

1λ = 2(0.316 nm) sin(90°)

λ = 2(0.316 nm) * 1

λ = 0.632 nm

The largest X-ray wavelength that can be diffracted by crystal planes is 0.632 nm.

Learn more about Bragg's Law:

https://brainly.com/question/14617319

#SPJ11

False. Staleness and burnout are often associated with overtraining, which occurs when an individual exceeds their capacity to recover from intense physical training or activity.

Overtraining can lead to physical and psychological symptoms, including decreased performance, fatigue, irritability, and decreased motivation. It is important for individuals to listen to their bodies and take rest and recovery periods to prevent overtraining and associated symptoms.

To know more about Overtraining, please click:

brainly.com/question/5430690

#SPJ11

where

m is the mass

c is the specific heat capacity

ΔT is the change in temperature

In your problem,

m=2.5 kg

c=2.60 kJ⋅°C-1kg-1

Δ

∴ q=2.5kg×2.60 kJ⋅°C-1⋅kg-1×60°C=390 kJ

False. Here is a step-by-step explanation:

1) Relative dating methods and absolute dating methods are two types of techniques used by geologists to determine the age of rocks and fossils.

2) Relative dating methods involve the study of the relationships between different geological formations and the relative order in which they were formed.

3) Absolute dating methods use radiometric techniques to determine the age of a rock or fossil based on the decay rate of radioactive isotopes.

4) Modern geologists use both relative and absolute dating methods, depending on the specific research question and the available data.

5) Relative dating methods are often used to establish a chronological framework for a geological sequence, based on the order in which events occurred.

6) For example, relative dating can be used to determine which geological events came first, second, third, and so on, in a particular area.

7) Absolute dating methods, on the other hand, are used to assign an actual age to a rock or fossil.

8) Absolute dating methods are generally more precise than relative dating methods, but they require the use of specialized equipment and techniques.

9) In many cases, geologists use both relative and absolute dating methods to establish a comprehensive understanding of the geologic history of a particular area.

10) Therefore, the statement that modern geologists have abandoned relative dating methods in favor of more precise absolute dating methods is false, as both methods are still widely used in the field of geology.

To know more about Modern geologists :

https://brainly.com/question/28274168

#SPJ11

Lower employment-to-population ratios in Europe than in the United States. Frequent holidays may decrease the total number of working days, resulting in lower employment rates. Thus the correct option is B.

Europe has lower employment-to-population ratios than the US. While more frequent holidays may enhance work-life balance in Europe, they might also reduce the overall number of working days, which would lead to lower employment rates.

However, given that working hours can differ greatly between industries, job kinds, and nations, this does not necessarily imply that individuals in Europe work fewer hours per year than those in the United States. Workplace regulations and cultural perspectives on work can also have an impact on employment rates and working hours.

Learn more about employment:

https://brainly.com/question/28183134

#SPJ4

B) Lower employment-to-population ratios in Europe than in the United States.

Answer - While European workers may have more frequent holidays, this does not necessarily mean they work fewer hours overall or that there are more jobs available. In fact, European countries often have stricter labor laws and regulations which can make it harder for employers to hire new workers. As a result, the employment-to-population ratio tends to be lower in Europe than in the United States, meaning a smaller percentage of the population is employed.

To learn more about employment , click on this -

brainly.com/question/1361941

#SPJ11

The total force exerted by the strings on the neck is 3061 N

We must determine the tension in each string and add it together to determine the overall force the strings are applying on the neck.

The wave speed equation may be used to determine the tension in a string:

v = fλ

where v is the speed of the wave (which is the same as the speed of the string), f is the frequency of the note, and λ is the wavelength of the wave (which is twice the length of the string).

For the g and d strings:

λ = 2(0.865 m) = 1.73 m

v = fλ

v_g = (98 Hz)(1.73 m) = 169.5 m/s

v_d = (73.4 Hz)(1.73 m) = 127.0 m/s

The tension in each string can be found using the wave equation:

T = [tex]μv^2/λ[/tex]

where T is the tension in the string, μ is the linear mass density of the string (mass per unit length), and v and λ are the speed and wavelength of the wave on the string.

For the g and d strings:

[tex]T_g = (5.8 g/m)(169.5 m/s)^2/1.73 m = 320 N[/tex]

[tex]T_d = (5.8 g/m)(127.0 m/s)^2/1.73 m = 196 N[/tex]

For the a and e strings

λ = 2(0.865 m) = 1.73 mv = fλ

v_a = (55 Hz)(1.73 m) = 95.2 m/sv_e = (41.2 Hz)(1.73 m) = 71.2 m/s

[tex]T_a = (26.8 g/m)(95.2 m/s)^2/1.73 m = 1643 N[/tex]

[tex]T_e = (26.8 g/m)(71.2 m/s)^2/1.73 m = 902 N[/tex]

The total force exerted by the strings on the neck is:

F_total = T_g + T_d + T_a + T_e

F_total = 320 N + 196 N + 1643 N + 902 N

F_total = 3061 N

Learn more about total force

https://brainly.com/question/30149537

#SPJ4

To calculate the power, in diopters, of eyeglasses that will correct vision when held 1.50 cm from the eyes, you need to know the individual's refractive error in diopters.

Refractive error refers to the degree of near sightedness (myopia), farsightedness (hyperopia), or astigmatism that an individual has. This value is typically measured by an optometrist or ophthalmologist using a phoropter.

Once the refractive error is known, the power of the corrective eyeglasses can be determined by dividing the refractive error by the distance (in meters) between the glasses and the eyes. In this case, since the glasses are held 1.50 cm from the eyes, the distance in meters would be 0.015 meters.

For example, if the individual has a refractive error of -2.00 diopters, the power of the corrective eyeglasses when held 1.50 cm from the eyes would be -2.00 / 0.015 = -133.33 diopters.

To know more about Refractive error:

https://brainly.com/question/30162760

#SPJ11

As the object distance becomes larger, the image distance approaches the focal length of the lens, while the object distance approaches infinity.

In optics, the relationship between object distance (u), image distance (v), and focal length (f) is given by the lens equation, 1/f = 1/v + 1/u. When the object distance becomes much larger than the focal length, i.e., u >> f, the image distance v approaches the focal length f. This means that the image is formed at a distance from the lens that is approximately equal to the focal length. On the other hand, as the object distance approaches infinity, the image distance approaches the same value as the focal length. This phenomenon is known as the "far point" of the lens and is used to correct for certain types of vision problems, such as nearsightedness.

Therefore, As the object distance becomes larger, the image distance approaches the focal length of the lens, while the object distance approaches infinity.

Learn more about focal length

brainly.com/question/29870264

#SPJ11

Increasing the pressure inside the extruder barrel is not a function of the screen pack and breaker plate.

The screen pack and breaker plate have several functions, including:
1. Filtering out contaminants and impurities from the molten plastic.
2. Creating uniform melt flow.
3. Reducing pressure fluctuations.
However, they do not serve to increase the pressure inside the extruder barrel.

Learn more about extruder barrels here: https://brainly.com/question/20344049

#SPJ11

The circled vector on the diagram below represents the tension on the rope.

The option C is correct

Tension is described as  the force transmitted through a string, rope, cable or wire when it is pulled tight by forces acting from opposite ends.

T = mg + ma

We know that the force of tension is calculated using the formula T = mg + ma.

In other terms, the pulling force that runs the length of a flexible connector, such a rope or cable, is known as tension. It is always pointed away from the force-applying object and along the length of the connector.

Learn more about tension at: https://brainly.com/question/24994188

#SPJ1

The crater on the moon will be more well-preserved than the crater on the Earth.

The main reason for this is the lack of atmosphere on the moon. On Earth, the atmosphere absorbs some of the energy from the impact, reducing the severity of the crater. Additionally, erosion from wind and water can also affect the appearance of the crater on Earth. On the moon, however, there is no atmosphere to absorb the energy from the impact, so the crater will retain its original shape and size for a longer period of time.

The moon also lacks the same degree of erosion processes as Earth. As a result, the craters formed on the moon are often well-preserved and can be used to study the history of impacts on the lunar surface.

To learn more about crater on the moon, here

https://brainly.com/question/24409142
#SPJ4

We can use the formula for Newton's second law (F = ma) to find the mass of the merry-go-round, given the force and assuming that it accelerates uniformly.

The angular acceleration of the merry-go-round can be found using the formula:

angular acceleration = (final angular speed - initial angular speed) / time

angular acceleration = [tex](0.5250 rev/s - 0 rev/s) / 5.00 s = 0.105 rev/s^2[/tex]

Then, using the formula for torque (τ = Iα) and the moment of inertia of a solid disk (I = 0.5MR^2), we can find the torque exerted on the merry-go-round. Assuming that the torque comes from a person pushing on the edge of the disk, we can estimate the force exerted as F = τ / R, where R is the radius of the disk.

To know more about Newton's second law, here

brainly.com/question/13447525

#SPJ4

Answer: The apple is lifted approximately 0.1232 m (rounded to four decimal places).

Explanation: To find the distance the apple is lifted, we can use the formula for work: work = force x distance.

The force required to lift the apple is equal to the weight of the apple, which can be calculated using the formula:

weight = mass x acceleration due to gravity.

we have work = weight x distance, 5.4 J = (0.178 kg x 9.81 m/s^2) x distance.

Solving for distance, we get a distance ≈ of 0.1232 m (rounded to four decimal places).

Here is an article on work, force, and distance in physics: https://byjus.com/physics/work-energy-power/#:~:text=The%20work%20done%20by%20a,only%20magnitude%20and%20no%20direction.

Answer:

Explanation: honestly i don’t speak spanish so please explain with english

If its mass is 500 kg and the acceleration due to gravity is 10 m/s^2, the weight of the elevator would be 5000 N (Newtons) .

To calculate the weight of the elevator, we can use the formula:

weight = mass * acceleration due to gravity

Given that the mass of the elevator is 500 kg and the acceleration due to gravity is 10 m/s^2, we can substitute these values into the formula and calculate the weight:

weight = 500 kg * 10 m/s^2

= 5000 N

Therefore, the weight of the elevator would be 5000 N (Newtons) if its mass is 500 kg and the acceleration due to gravity is 10 m/s^2.

To know more about acceleration due to gravity, here

brainly.com/question/13860566

#SPJ4

--The complete Question is, What would be the weight of the elevator if its mass is 500 kg, assuming that the acceleration due to gravity is 10 m/s^2? --

Answer:

Speed of Skater = 8.16 m/s

Explanation:

Using kinetic energy:

[tex]M_{t} = M_{skater} + m_{ball}\\\frac{1}{2}M_{t}V_{i}^2 = \frac{1}{2}*M*V_{s} ^2+\frac{1}{2}*m*V_{b}^2\\ M_{t}V_{i}^2 = M_{s}*V_{s} ^2+m_{b}*V_{b}^2\\M_{t}V_{i}^2-m_{b}*V_{b}^2 = M_{s}*V_{s} ^2\\(M_{t}V_{i}^2-m_{b}*V_{b}^2)/M_{s} = V_{s} ^2\\V_{s} = \sqrt{\frac{(M_{t}V_{i}^2-m_{b}*V_{b}^2)}{M_{s}} } \\[/tex]

This gives the skater a velocity of 8.16 m/s after throwing the ball

The observed value of the total radiant energy flux density at the earth from the sun, integrated over all emission wavelengths and referred to the mean earth-sun distance, is approximately 1,366 watts per square meter.

This value is known as the solar constant and is an important factor in understanding the earth's climate and energy balance. It represents the amount of solar energy that is received per unit area at the top of the earth's atmosphere and is a key input for models of global climate change.

Learn more about energy flux

https://brainly.com/question/30480603

#SPJ4

Weight is defined as the force on an object that results from acceleration or gravity.

It can be calculated as:

W=mg

W= weight of an object (Newtons)

m = mass of the object (kilograms)

g = gravity (m/s^2)

given the information we can rearrange for m:

[tex]m=\frac{3920N}{9.8m/s^2}[/tex]

[tex]m=400 kg[/tex]

After switch S is closed, the capacitors in the circuit start to discharge.

The initial stored energy in the capacitors is given by [tex]1/2*C*V^2[/tex],

where C is the capacitance of the capacitors and V is the initial voltage across them.

As the capacitors discharge, the voltage across them decreases and so does the stored energy.

When the capacitors have lost 80.0% of their initial stored energy, the voltage across them will be 0.447 times the initial voltage.

At this point, the current in the circuit can be calculated using Ohm's law, which states that the current is equal to the voltage divided by the total resistance of the circuit.

Therefore, the current in the circuit at this point can be calculated as I = V/R, where V is the voltage across the capacitors and R is the total resistance of the circuit.

For more such answers on Capacitance
https://brainly.com/question/16998502

#SPJ11

The molecules in the Earth's atmosphere scatter blue wavelengths of light, making the sky appear blue during the day. The correct answer is a.

This phenomenon is known as Rayleigh scattering, which occurs when sunlight enters the Earth's atmosphere and interacts with the gas molecules in the air. The shorter, blue wavelengths of light are more easily scattered by the molecules in the atmosphere, while the longer, red wavelengths are less affected and continue to travel in a more direct path.

As a result, when we look up at the sky during the day, we see a blue color because the blue light is being scattered in all directions by the atmosphere. At sunrise and sunset, the sky appears more orange or red because the sun's light has to travel through more of the atmosphere, causing more scattering of the shorter, blue wavelengths and leaving more of the longer, red wavelengths to reach our eyes.

Learn more about  Earth's atmosphere

https://brainly.com/question/13154099

#SPJ4

This is a very large amount of time, approximately [tex]3.6 x 10^5[/tex] years, which is not feasible for the astronauts.

We can use the conservation of momentum to solve this problem. Initially, the system (two astronauts and the laser) is at rest, so the total momentum is zero. When the laser is fired and the astronaut is propelled towards the shuttle, she gains some momentum in the direction of the shuttle, and the system as a whole gains an equal and opposite momentum.

First, we need to find the momentum gained by the astronaut. We can use the formula for the momentum of a photon:

p = h / λ

where p is the momentum, h is the Planck constant, and λ is the wavelength of the laser light. We are given the power of the laser (121.0 W), but we also need to know the energy of each photon. We can use the formula:

E = hc / λ

where E is the energy of a photon, c is the speed of light, and λ is the wavelength of the laser light. Rearranging this formula, we get:

λ = hc / E

Substituting the values and converting to SI units, we get:

[tex]λ = (6.626 x 10^-34 J s)(3.00 x 10^8 m/s) / (6.63 x 10^-19 J) = 3.13 x 10^-7 m[/tex]

Using this wavelength, we can find the momentum gained by the astronaut:

[tex]p = h / λ = (6.626 x 10^-34 J s) / (3.13 x 10^-7 m) = 2.12 x 10^-27 kg m/s[/tex]

This is the momentum gained by the astronaut in one photon.

To find the time it takes for the astronaut to reach the shuttle, we can use the impulse-momentum theorem:FΔt = Δp

where F is the force exerted by the laser, Δt is the time for which the force is applied, and Δp is the change in momentum of the astronaut. We can rearrange this formula to solve for Δt:

Δt = Δp / FThe force exerted by the laser can be found by dividing the power by the speed of light:

[tex]F = P / c = 121.0 W / 3.00 x 10^8 m/s = 4.03 x 10^-7 N[/tex]

Substituting the values, we get:

[tex]Δt = Δp / F = (2.12 x 10^-27 kg m/s) / (4.03 x 10^-7 N) = 5.27 x 10^-21 s[/tex]

This is the time it takes for the astronaut to gain the momentum needed to reach the shuttle. However, this time does not include the time it takes for the astronaut to travel the distance to the shuttle. We can use the average velocity of the astronaut to find this time:

v_avg = Δx / Δtwhere Δx is the distance to the shuttle. Substituting the values, we get:

[tex]v_avg = (39.4 m - 19.7 m) / (5.27 x 10^-21 s) = 3.80 x 10^22 m/s[/tex]

Learn more about the astronauts.

https://brainly.com/question/11244838

#SPJ4

The type of bar optic you are describing is commonly known as a "free flow pourer" or "free pour spout."

These types of pourers do not have a specific amount they dispense but instead rely on the bartender's skill to regulate the flow of liquid by applying and releasing pressure on the bottle. The flow of liquid stops when pressure is released, allowing for precise and controlled pouring.

Free flow pourers are commonly used in bars and restaurants to pour spirits, mixers, and other liquids into cocktails and drinks. They can come in a variety of sizes and materials, including plastic, metal, and silicone, and are easily replaceable when worn or damaged.

Learn more about bar optic

https://brainly.com/question/30694096

#SPJ4

The magnitude of the average angular acceleration of the fan is 2.24 rad/s2 . So the correct answer is option: b.

The average angular acceleration can be calculated using the formula:

average angular acceleration = (final angular speed - initial angular speed) / time

Plugging in the given values, we get:

average angular acceleration = (4.4 rad/s - 10 rad/s) / 2.50 s

average angular acceleration = -2.56 rad/s2

Note that the negative sign indicates that the angular acceleration is in the opposite direction to the initial angular velocity.

|average angular acceleration| = 2.56 rad/s2 ≈ 2.24 rad/s2 .

Therefore, the correct answer is (b).

To know more about magnitude, here

brainly.com/question/14452091

#SPJ4