Empirical formula for S3O9
Answer:
* The empirical formula of a compound shows the ratio of elements present in a compound
* The molecular formula of a compound shows how many atoms of each element are present in a molecule of a compound.
Example: the compound butene has a molecular formula of C4H8. The empirical formula
of butene is CH2 because there is a 1:2 ratio of carbon atoms to hydrogen atoms.
Titanium(IV) chloride decomposes to form titanium and chlorine, like this:
TiCl4(l) → Ti(s)+ 2Cl2(g)
At a certain temperature, a chemist finds that a reaction vessel containing a mixture of titanium(IV) chloride, titanium, and chlorine at equilibrium has the following composition:
Compound Amount
TiCl4 4.18g
Ti 1.32g
Cl2 1.08g
Required:
Calculate the value of the equilibrium constant for this reaction.
The full question is shown in the image attached to this answer
Answer:
6.2 * 10^-3
Explanation:
The reaction at equilibrium is as follows;
TiCl4(l) → Ti(s)+ 2Cl2(g)
We have to obtain the concentration of chlorine gas as follows;
[Cl2] = 1.08/70.91 g/mol × 5.2 L
[Cl2] = 0.079 M
Kc = [Cl2]^2
Kc = [ 0.079]^2
Kc = 6.2 * 10^-3
Is snow organic or inorganic?
Answer:
snow is made up of a variety of mostly organic matter, including dead or dying animals and phytoplankton, protists, fecal matter, sand, and other inorganic dust.
Explanation:
I hope I helped!!
Plz mark me brainliest it would really make my day!
Answer:
I think its organic unless we are talking about this snow storm then no
the Rockies and the Appalachians are two major mountain ranges in the United States. Which type of plate movement caused these mountain ranges to form
Answer:
Convergent
Explanation:
I don't know whether this is one of your answers but It is convergent because convergent boundaries are when two plates collide against each other which can create mountains and volcanos.
Put the following elements in order of increasing atomic number:
1. Strontium
2. Fluorine
3. Terbium
4. Zirconium
5. Iodine
6. Europium
7. Gallium
8. Aluminum
Answer:
Here is the answer ⬆️⬆️⬆️⬆️⬆️⬆️⬆️
The order of the given elements in increasing atomic number is given as F (9), Al (13), Ga (31), Sr (38), Zr (40), I(53) and Terbium (65).
What is atomic number?The atomic number of an element in periodic table is the number of electrons in its neutral atom. Elements are arranged in periodic table in an increasing order of atomic number from left to right.
An atom is composed of electrons, protons and neutrons. Protons are positively charged and electrons are negatively charged particles and they are equal in an atom. Thus, the total negative charge is neutralised by the negative charges.
The order for the given elements in periodic table in an increasing atomic number is F (9), Al (13), Ga (31), Sr (38), Zr (40), I(53) and Terbium (65).
To find more on atomic number, refer here:
https://brainly.com/question/14190064
#SPJ2
3. Which state of matter has a defined shape?
HELP FAST
Answer:
Solid state of matter has a definite shapeThe answer to this is solids!
does a mole of hydrogen have the same mass as a mole of oxygen? explain your answer
What type of reaction
the following chemical reaction?
2C2H4O2 → C4H6O3 + H2O
When a chemical reaction is run in aqueous solution inside a calorimeter, the temperature change of the water (and Ccal) can be used to calculate the enthalpy change for the reaction. Here, we will study the reaction of hydrochloric acid with sodium hydroxide in the calorimeter from problem 3. Equal volumes (50.0 mL) of 1.00 M sodium hydroxide and 1.00 M hydrochloric acid are mixed.
HCl+NaOH→NaCl+H2O
1. What is the total change in enthalpy (in Joules) for the reaction?
2. Where initial temperature is 21.2 °C and final temperature is 28.0 °C. Ccal is 1234.28 j
Answer:
The total change in enthalpy for the reaction is - 81533.6 J/mol
Explanation:
Given the data in the question;
Reaction;
HCl + NaOH → NaCl + H₂O
Where initial temperature is 21.2 °C and final temperature is 28.0 °C. Ccal is 1234.28 J
Moles of NaOH = 50.mL × 1.00 M = 50.0 mmol = 0.0500 mol
Moles of HCl = 50.mL × 1.00 M = 50.0 mmol = 0.0500 mol
so, 0.0500 moles of H₂O produced
Volume of solution = 50.mL + 50.mL = 100.0 mL
Mass of solution m = volume × density = 100.0mL × 1.0 g/mL = 100 g
now ,
Heat energy of Solution q= (mass × specific heat capacity × temp Δ) + Cal
we know that; The specific heat of water(H₂O) is 4.18 J/g°C.
so we substitute
q_soln = (100g × 4.18 × ( 28.0 °C - 21.2 °C) ) + 1234.28
q_soln = 2842.4 + 1234.28
q_soln = 4076.68 J
Enthalpy change for the neutralization is ΔH[tex]_{neutralization}[/tex]
ΔH[tex]_{neutralization}[/tex] = -q_soln / mole of water produced
so we substitute
ΔH[tex]_{neutralization}[/tex] = -( 4076.68 J ) / 0.0500 mol
ΔH[tex]_{neutralization}[/tex] = - 81533.6 J/mol
Therefore, the total change in enthalpy for the reaction is - 81533.6 J/mol
What are the main sources of outdoor air pollution and how do they cause smog?
Answer:
The common sources of outdoor air pollution are emissions caused by combustion processes from motor vehicles, solid fuel burning and industry. Other pollution sources include smoke from bushfires, windblown dust, and biogenic emissions from vegetation (pollen and mold spores).
smog is produced when sunlight reacts with nitrogen oxides in the atmosphere. Nitrogen oxides come from car exhaust, coal power plants, and factory emissions. When sunlight hits these chemicals, they form airborne particles and ground-level ozone—or smog.
. Which state of matter has a defined volume but no defined shape?
HELPPPP PLEASE FAST
Answer:
liquid
Explanation:
it's not plasma, solid, or gas
so I think liquid
The molecular-orbital model for Ge shows it to be:_______.
A) a conductor, because all the lower energy band orbitals are filled and the gap between the lower and higher bands is large.
B) an insulator, because all the lower energy band orbitals are filled and the gap between the lower and higher bands is large.
C) a semiconductor, because the gap between the filled lower and empty higher energy bands is relatively small.
D) a semiconductor, because the gap between the filled lower and empty higher energy bands is large.
E) a conductor, because its lower energy band orbitals are only partially filled.
Answer:
Option C
Explanation:
Pure germanium is a bad conductors of electricity. It is so because its valence band is full and its outer electrons are attached through covalent bond is a diamond like framework. In metallic sense, it is neither a conductor nor an insulator but a semiconductor. It has a small band gap of 0.7eV.
Hence, option C is correct
Indicate whether each structure is aromatic, nonaromatic, or antiaromatic. Assume planarity. Compound A is a 5 membered heterocyclic ring containing two pi bonds. On one of the pi bonds is a sulfur with one lone pair and a positive charge. There is an N H group between the two pi bonds with one lone pair. Compound B is a 6 membered ring with three pi bonds. One of the ring atoms is a protonated oxygen with one lone pair. Compound C is an 8 membered ring with a double bond between carbons 2 and 3, between carbons 5 and 6 and between carbons 7 and 8. There is a positive charge on carbon 4 and a negative charge and lone pair on carbon 1. Compound D is a 7 membered ring with three pi bonds. In between two alkenes is a boron attached to a hydrogen. Comppound E is a 7 membered ring with three pi bonds. In between two alkenes is a negative charge with a lone pair.
Answer:
this some next level stuff homie
Explanation:
imma just guess 7?
The thing being described is shaped like a ring with five parts. Inside the ring, there are two special types of bonds. This has a sulfur that is positively charged and has one unshared pair, also it has an NH group with one unshared pair.
What is the structureCompound B is a substance that is made up of two or more different elements or molecules.
The thing being described has a ring with six members and three pi bonds. It has an oxygen atom with an extra proton and one extra electron. This substance is not aromatic.
Read more about aromatic here:
https://brainly.com/question/30624539
#SPJ6
How many CaF are in a 1.7x10^25 please I need help fast!!
28 mol CaF
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Atomic Structure
Avogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Stoichiometry
Using Dimensional AnalysisExplanation:Step 1: Define
[Given] 1.7 × 10²⁵ molecules CaF
[Solve] moles CaF
Step 2: Identify Conversions
Avogadro's Number
Step 3: Convert
[DA] Set up: [tex]\displaystyle 1.7 \cdot 10^{25} \ molecules \ CaF(\frac{1 \ mol \ CaF}{6.022 \cdot 10^{23} \ molecules \ CaF})[/tex][DA] Multiply/Divide [Cancel out units]: [tex]\displaystyle 28.2298 \ moles \ CaF[/tex]Step 4: Check
Follow sig fig rules and round. We are given 2 sig figs.
28.2298 mol CaF ≈ 28 mol CaF
who is the father of phycis
Galileo Galilei
hope it helps you
Answer:
Galileo Galilei is the father of Physics
I hope it helps ❤❤
Iron-59 which is used to diagnose anaemia has a half life of 45days, what fraction of it is left in 90 days
Answer:
0.25 of the original
Explanation:
(0.5)^(90/45)
The fraction of iron-59 after 90 days is 0.25.
Iron-59 decays following first-order kinetics. Given the half-life ([tex]t_{1/2}[/tex]) of 45 days, we can calculate the rate constant (k) using the following expression.
[tex]k = \frac{ln2}{t_{1/2}} =\frac{ln2}{45day} = 0.015 d^{-1}[/tex]
For first-order kinetics, we can find the fraction of Fe ([Fe]/[Fe]₀) after and an elapsed time (t) of 90 days, using the following equation.
[tex]\frac{[Fe]}{[Fe]_0} =e^{-k \times t } = e^{-0.015 d^{-1} \times 90 d } \approx 0,25[/tex]
The fraction of iron-59 after 90 days is 0.25.
You can learn more about kinetics here:
https://brainly.com/question/2284525
Father, I come to you worn and weary from the hard times I have walked through recently. I come to you seeking your shelter where I know I can find security and rest in your shadow. Father, you are mighty. I know my circumstances are no match for Your great power. Father I place a healing of these people that they feel a conviction in there heart that they would turn from there wicked way and turn to you father. IN JESUS NAME AMEN
Answer:
Fact: There’s only one letter that doesn’t appear in any U.S. state name
And that is Q
Explanation:
What is the main FUNCTION of the digestive system?
What are some of the main organs of the digestive system?
Help! I’ll give brainliest if u get it right!
Answer:
That is the Atomic mass
Explanation:
The element symbol is S, Element name is sulfur, and
Atomic number is 16
3. Una piedra que se tira verticalmente hacia arriba se mueve según la
leys = 64y - 8t^2, si "s" se mide en pies (ft) y t en segundos, hallar:
a) SU posición y velocidad después de dos segundos y después de tres
segundos.
b) ¿Qué altura alcanzará?
c) ¿A qué distancia se moverá al cabo del cuarto segundo?
Answer:
Explanation:
Para mejor entendimiento, reeescribiremos la ley que pusiste:
S = 64t - 8t² (1)
De acuerdo al enunciado del problema, S tiene unidades de pie y t en segundos, por lo tanto, S, que se refiere a la posición o altura alcanza de la piedra, puede ser determinado usando esa expresión a tiempos específicos.
Para el calculo de velocidad usamos la siguiente expresión:
V = -g * t (2) g: 32.16 ft/s
Tomando en cuenta estas expresiones, veamos los valores de posición y velocidad:
a) Para t = 2 s
S = 64(2) - 8(2)²
S = 96 ft
V = -32.16 * 2
V = -64.32 ft/s
Para t = 3 s
S = 64(3) - 8(3)²
S = 120 ft
V = -32.16 * 3
V = -96.48 ft/s
b) Para saber la altura que alcanzará, usamos la expresión de altura máxima que es la siguiente:
Smáx = -V₀² / 2g (3)
Para el valor de la velocidad inicial, podemos asumir el valor de la velocidad dada por la formula de la ley S, que es 64. Esto porque al ser multiplicado por el valor del tiempo, queda en unidades de distancia, asi que este valor debe tener unidades de velocidad. Reemplazando este valor en la expresión:
Smáx = -(64)² / 2 * 32.16
Smáx = 63.68 ft
c) Para esta parte, usamos nuevamente la formula de la ley S, usando t = 4 s y listo:
S = 64(4) - 8(16)
S = 128 ft
Espero te sirva
By definition, a(n) _______acid is any species that can donate a proton. Ammonia has a proton bonded to nitrogen, so ammonia can be an base (although a very weak one). A(n)___________ base is a proton acceptor, that is, it must have a pair of electrons to share with a proton. In theory, any atom with an unshared electron pair can be a________ pair so ammonia is a_______ proton; instead, it acts as a base and pulls a proton from water to a small extent. base The nitrogen in ammonia has an unshared electron In water, ammonia is too weak an ______-to give up its
Answer:
A Brønsted-Lowry acid.
A Brønsted-Lowry base.
Ammonia is an acceptor of proton.
Explanation:
A Brønsted-Lowry acid is any atom that can donate a proton (H +) to another atom or molecule whereas Brønsted-Lowry base is any species that can accept a proton from another atom or molecule or in other words, a Brønsted-Lowry acid is a proton donor, while on the other hand, a Brønsted-Lowry base is a proton acceptor. The ammonia molecule accepts the hydrogen ion is considered as the Brønsted-Lowry base.
At room temperature, CsF is expected to be:______.
a. a soft solid.
b. a conducting solid.
c. a gas.
d. a brittle solid.
e. a liquid.
Answer:
d. a brittle solid.
Explanation:
Hello!
In this case, since cesium fluoride is widely known as an ionic compound due to the large electronegativity difference, it is possible to discard a. due to its crystalline structure, b. because conducting solids are metals, c. because ionic compounds are not likely to be gases and e. because even when it is soluble in water, the problem is not referring to an aqueous solution; therefore, the answer is d. a brittle solid.
Best regards!
How many atoms are in phosgene
Answer:
3 atoms
Explanation:
there is one calcium and two chlorine
A cough syrup has a density of 1.20 g/mL. A doctor orders 48.0 of the syrup for a sick child. How many teaspoons will you administer to the child
Answer:
because I want to save life
What mass of Iron (III) acetate will be produced when 1.50 grams of iron reacts in acetic acid?
Fe + H(C2H3O2) ® Fe(C2H3O2)3 + H2
Answer:
Fe + H(C2H3O2) ........
Both amines and amides are derivatives of
acetic acid
sodium hydroxide
ammonia
sodium chloride
Answer:
Ammonia
Explanation:
Both amines and amides are structurally similar to ammonia, the difference is the introduction of a carbon into the structure.
Prokaryotic cell division is a___________process involving onc chromosom.
A. simple
B. complex
C. unusual
Answer:
It’s is a simple
Explanation:the prokaryotic cell involves a simple process which intern involves one chromosom
You dissolve 0.64 g of potassium chloride (KCl) in 725 ml of water.
What is the molarity of the solution?
(From the periodic table: 1 mol K = 39.10 g; 1 mol Cl = 35.453 g)
Enter the value rounded to three decimal places with no units
Will give BRAINLEST
Answer:
0.012 M
Explanation:
Step 1: Given and required data
Mass of KCl (m): 0.64 gVolume of water (V): 725 mL (We will assume it is equal to the volume of the solution)Molar mass of KCl (M): 74.553 g/molStep 2: Calculate the moles (n) of solute (KCl)
We will use the following expression.
n = m/M = 0.64 g / (74.553 g/mol) = 8.6 × 10⁻³ mol
Step 3: Calculate the molar concentration (C) of the solution
The molarity is equal to the moles of solute divided by the liters of solution.
C = 8.6 × 10⁻³ mol/0.725 L = 0.012 M
Based on the following equation, how many moles of hydrochloric acid (HCl)are needed to react with 0.44 moles of potassium
permanganate (KMnO4)?
2KMnO4 + 8HCI - 3Cl2 + 2MnO2 + 4H2O + 2KCI
Answer:
1.76 moles of HCl.
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
2KMnO₄ + 8HCl —> 3Cl₂ + 2MnO₂ + 4H₂O + 2KCl
From the balanced equation above,
2 moles of KMnO₄ reacted with 8 moles of HCl.
Finally, we shall determine the number of mole of HCl needed to react with 0.44 moles of KMnO₄. This can be obtained as follow:
From the balanced equation above,
2 moles of KMnO₄ reacted with 8 moles of HCl.
Therefore, 0.44 moles of KMnO₄ will react with = (0.44 × 8)/2 = 1.76 moles of HCl.
Thus, 1.76 moles of HCl is needed for the reaction.
Look at sample problem 19.5 in the 8th ed Silberberg book. Write the ion-product expression at equilibrium for each compound: How to enter the correct answer: e.g. silver sulfate (Ag2SO4) enter this: {Ag+}2{SO42-} don't enter spaces, use square brackets [] not{}or () for concentration and don't worry about subscripting or superscripting
(1) magnesium carbonate
(2) calcium phosphate
(3) silver sulfide
Answer:
See explanation
Explanation:
The term ion product is an expression that does not necessarily reflect equilibrium conditions which can be used to determine the concentration of ions in a solution of the stated substance. As a matter of fact, the ion product is different from the solubility product which reflects equilibrium conditions.
The ion product of the following substances are shown below;
magnesium carbonate - MgCO3
MgCO3(aq) -------> [Mg^2+] [CO3^2-]
calcium phosphate - Ca3(PO4)2
Ca3(PO4)2(aq) --------> [Ca^2+]^3 [PO4^3-]^2
silver sulfide - Ag2S
Ag2S(aq) --------> [Ag^+]^2 [S^2-]