Answer:
0.995*c= 2.98*10^8m/s
Explanation:
Using
E= mc²
10.5 mc² = mc²/√1-v²/c²
So
1-v²/c²=( 1/10.5)²
V= √1-0.009c
V= 0.995 x 3E8m/s
= 2.98*10^8m/s
"If we increase the frequency of transverse waves on a string, what happens to the period of oscillation of any given point on the string?"
Answer:
Period will decrease
Explanation:
Because from the relationship
T = K/f
Period inversely proportional to frequency so as frequency increase period decrease and vice versa
How many electrons flow through a point in a wire in 7.00 s if there is a constant current of I = 4.35 A?
Answer:
1.90×10²⁰ Electrons
Explanation:
From the question,
Q = It.................... Equation 1
Where Q = charge flowing through the wire, I = current, t = time
Given: I = 4.35 A, t = 7.00 s
Substitute these values into equation 1
Q = 4.35(7.00)
Q = 30.45 C.
But,
1 electron contains 1.6×10⁻¹⁹ C
therefore,
30.45 C = 30.45/1.6×10⁻¹⁹ electrons
= 1.90×10²⁰ Electrons
Light of wavelength 500 nm illuminates a round 0.50-mm diameter hole. A screen is placed 6.0 m behind the slit.. Find the width of the central maximum on the screen.
A) 6.0 mm.
B) 12 mm.
C) 260 mm.
D) 7.3 mm.
E) 15 mm.
Answer:
15mm
Explanation:
We know that for circular holes first dark spot is given by
sin စ = 1.22 λ/D
Also we know that at the same time
tan စ = r/L
So
r = L tanစ = 6 x tan( arcsin(1.22x 500 x10^9/0.50 x 10^ 3))
= 0.0073 m = 7.3 mm
However since the size is twice that so 14.6 mm which is approx 15mm
a 900 w microwave generator in an oven generates energy quantra of frquenecy 2560 mhz how many energy
Answer:
1.6E-32J
Explanation:
Using
Energy= power x time
And E= hf
hf= Pt
t = hf/p= 6.6*10^-34x 2560*10^-3/900
= 18.7*10^-37s
So E = pt
= 900 x 1.8E-37
1.6x10^-32J
What approximately is the percent uncertainty for a measurement given as 1.57 m^2?
Answer:
The value is [tex]u = 0.64[/tex]%
Explanation:
From the question we are told that
The measurement is [tex]A = 1.57 \ m^2[/tex]
The percent uncertainty is mathematically evaluated as
[tex]u = \frac{0.01 * 100}{A}[/tex]
Here 0.01 is uesd due to the fact that the value given is in three decimal places
[tex]u = 0.64[/tex]%
The approximately percent uncertainty for the measurement is 0.64%.
The given parameters:
Area of the measurement, A = 1.57 m²The uncertainty in the measurement of the area = ±0.01 m²
The approximately percent uncertainty for the measurement is calculated as follows;
[tex]Uncertainty = \frac{0.01}{1.57} \times 100\%\\\\Uncertainty = 0.64 \ \%[/tex]
Thus, the approximately percent uncertainty for the measurement is 0.64%.
Learn more about percent uncertainty here: https://brainly.com/question/5493941
PLEASE HELP DUE BEFORE 11:30 TODAY!!!!
Which of the following quantities is NOT a vector quantity?
A. 926 m to the north
B. 5.2 m/s to the west
C. 46 m down
D. 12.3 m/s faster
Answer:
D is not the a vector quantities
A car is traveling at a speed of 80 ft/s when the brakes are suddenly applied, causing a constant deceleration of 10 ft/s2. Determine the time required to stop the car and the distance traveled before stopping.
Answer:
Time taken = 8 second
Distance traveled = 320 ft
Explanation:
Given:
Initial velocity (u) = 80 ft/s
Acceleration (a) = (-)10 ft/s²
Final velocity (v) = 0 ft/s
Find:
Time taken
Distance traveled
Computation:
v = u + at
0 = 80 + (-10)(t)
t = 8 second
Time taken = 8 second
s = ut + (1/2)(a)(t)²
s = (80)(8) + (1/2)(-10)(8)²
s = 320 ft
Distance traveled = 320 ft
Place these bodies of our solar system in the proper order of formation
Answer:
solar nebula, the sun, planetesimals, inner planets, and last but not least outer planets
Answer:
Solar nebula, The sun, planetesimals , inner planets, outer planets
Explanation:
White light is shining on the surface of a soap bubble, which has the same index of refraction as water. Find the minimum thickness, in nanometers, of a soap bubble which appears red (a wavelength of 725 nm) when the light is perpendicular to its surface.
Answer:
The minimum thickness is [tex]t = 1.363 *10^{-7} \ m[/tex]
Explanation:
From the question we are told that
The index of refraction of the bubble is [tex]n = 1.33[/tex] = index of refraction of water
The wavelength is [tex]\lambda =725nm = 725 *10^{-9} \ m[/tex]
Generally the condition for constructive interference is mathematically represented as
[tex]2 * t = [m + \frac{1}{2} ] * \frac{\lambda }{n}[/tex]
Now t is the thickness and at minimum t, m(order of maximum ) = 0
So
[tex]2 * t = [0 + \frac{1}{2} ] * \frac{ 725 *10^{-9} }{ 1.33}[/tex]
=> [tex]t = 1.363 *10^{-7} \ m[/tex]
mass is tied to spring and begins periodically . the distance between its highest and its lowest position is 48cm. what is the amplitude of the vibration
Answer:24cm
Explanation:
As astronaut visiting Planet X, you’re assigned to measure the free-fall acceleration. Getting out your meter stick and stopwatch, you time the fall of a heavy ball from several Heights. You data is as follows:
Height (m) Fall Time (s)
0.0 0.00
1.0 0.54
2.0 0.72
3.0 0.91
4.0 1.01
5.0 1.17
a.) Analyze these data to determine the free-fall acceleration on Planet X. Your analysis should involve fitting a straight lie to an appropriate graph. Place the graph here. (Hint Kinematics)
b.) Determine the uncertainty in the free-fall acceleration.
Answer:
g = (0.13 + - 0.05) m / s²
Explanation:
a) The equations of physics are valid in all inertial systems, therefore the kinematic relationships on this planet are the same as on Earth.
y = v₀ t - ½ g t²
From the statement it follows that the body is released, so its initial velocity is zero
y = 1/2 g t²
where we take the downward direction as positive
With this expression to make a linear graph we must graph t² vs y, see attached. Observe that the controlled variable is the height, so this is the independent variable and must go on the x axis, the values of the slope and point of cut can be obtained from this graph by lineal regretion
y ’= m x + b
y ’= 0.2668 x + 0.00406
If we compare this equation of the line with the equation of free fall
y ’= t2
x = y
m = 0.2668
b = 0.00406
Since the value of b is very small, we can say that our assumption that the initial velocity is zero is correct.
Now we can compare the expressions of free fall and the equation of the line obtained
y = ½ g t2
y ’= m x
to be functionally equivalent
x = 1 / m y '
now we can see the slope
1 / m = ½ g
g = 2 / m
g = 2 / 0.2668
g = 7.496 m / s²
b) the uncertainty of the acceleration is
Δg = dg/dm Δm
the uncertainty of m is given by the fit of the linear regression of the program Δm = 0.025
dg / dm = 1 / 2m
Δg = 1 /2m Δm
Δg = 1 / (2 0.2668) 0.025
Δg = 0.047
The result of this exercise with the correct significant figures
g = (0.13 + - 0.05) m / s²
10m= (5.0) + (.5)(9.8)(5.0)
explain the different methods that can be used to model the motion of an object.
In physics, motion is the phenomenon in which an object changes its position over time. Motion is mathematically described in terms of displacement, distance, velocity, acceleration, speed, and time. The motion of a body is observed by attaching a frame of reference to an observer and measuring the change in position of the body relative to that frame with change in time. The branch of physics describing the motion of objects without reference to its cause is kinematics; the branch studying forces and their effect on motion is dynamics.
Answer:
You can describe the motion of an object by its position, speed, direction, and acceleration. An object is moving if its position relative to a fixed point is changing. idk if this helps.
Explanation:
You are throwing a stone straight-up in the absence of air friction. The stone is caught at the same height from which it was thrown. the speed of the stone when thrown is equal to the speed when caught.A. TrueB. False
Answer:
A. True
Explanation:
When a stone is thrown straight-up, it has an initial velocity which decreases gradually as the stone move to maximum height due to constant acceleration due to gravity acting downward on the stone, at the maximum height the final velocity of the stone is zero. As the stone descends the velocity starts to increase and becomes maximum before it hits the ground.
Height of the motion is given by;
[tex]H = \frac{u^2}{2g}[/tex]
g is acceleration due to gravity which is constant
H is height traveled
u is the speed of throw, which determines the value of height traveled.
Therefore, when the stone is caught at the same height from which it was thrown in the absence of air resistance, the speed of the stone when thrown will be equal to the speed when caught.
Which best describes those that can pass through? They are concentrated. They are soluble. They are diluted. They are heated.
Answer:
B
Explanation:
SmARt
The term “solubility” describes a property that describes a substance's capacity to dissolve in a solvent. It is calculated as the highest solute concentration that can be dissolved in a solvent at equilibrium. A saturated solution is the term used to describe the outcome. Thus, option B is correct.
What best describes those that can pass through?The solute is the substance that dissolves. The solvent is the material that dissolves it. Solvents and solutes can exist in any material state. Water is a strongly polar substance, making it a very good solvent for many solutes.
Because they share chemical characteristics with the plasma membrane, some substances can pass through it. Which definition best sums up those who can pass through? They focus intensely. They dissolve easily.
Therefore, The maximum amount of a chemical that will dissolve in a given amount of solvent at a given temperature is referred to as its solubility.
Learn more about pass here:
https://brainly.com/question/28424764
#SPJ2
2. The higher the temperature of water, the faster the egg will cook. What
is the dependent variable? *
A. the stove
B. the egg
C.temperature of water
D. the person stirring
Answer:
The dependent variable is the cook time of the egg
The higher the temperature of the water, the faster the egg will cook, then the dependent variable is the temperature of the water, therefore the correct answer is the option C
What is thermal energy?It can be defined as the form of the energy in which heat is transferred from one body to another body due to their molecular movements, thermal energy is also known as heat energy.
Thermal energy can be produced with help of various means such as by burning fossil fuels, with the help of solar energy.
The correct direction for heat flow is from hot to cold because heat always moves naturally from a higher thermal potential to a lower thermal potential unless additional work is provided by an external machine.
Thus, The dependent variable is the water's temperature, and since the egg will cook more quickly at higher water temperatures, option C is the best choice.
Learn more about thermal energy from here
brainly.com/question/3022807
#SPJ2
A man has a total of 200 apples divided evenly among 5 boxes. How many apples are in each box?
. What are the units for your answer?
/
Answer:
40 units
Explanation:
200 divided evenly by 5 is 40. Therefore there are 40 units
(200 apples) / (5 boxes) = 40 apple/box
As a free falling object rises, the velocity is directed?
Answer:The acceleration of all free-falling objects is directed downwards. A rising object slows down due to the downward gravity force
Explanation:
As a free falling object rises, velocity is directed downwards.
Freely fall:Free fall is a special case of projectile motion. In a free fall direction is always downward and initial velocity of the object is null.
The zero initial velocity of the object signifies that falling object was dropped rather than thrown downwards. Freefall is a special case of motion with constant acceleration.
Free fall is a state of body which moves freely in any manner in presence of gravity. Freely falling objects do not have air resistance. A freely falling object accelerate at a rate of 9.8 m/s2.
There are different formulas for freefall such as:
v2= 2ghv= gth= 1/2 gt2Therefore, As a free falling object rises, velocity is directed downwards.
To learn more about free fall, refer to the link:
https://brainly.com/question/13299152
#SPJ2
What is the magnitude of the force of a +25 microCoulomb charge exerts on a +2.5 miliCoulomb charge 28 cm away?
Answer:
7.175 N
Explanation:
From coulomb's law of electrostatics,
F = kQq/r²........................... Equation 1
Where F = magnitude of the force, M = first Charge, q = second Charge, r = distance between the charges and k = coulomb's constant
Given: Q = +25 micro-Coulomb = + 25×10⁻⁶ C, q = +2.5 micro-coulomb = +2.5×10⁻⁶ C, r = 28 cm = 0.28 m.
Constant: k = 9×10⁹ Nm²/C²
Substitute these values into equation 1
F = 9×10⁹(25×10⁻⁶)(2.5×10⁻⁶)/ 0.28²
F = 562.5×10⁻³/0.0784
F = 7.175 N
If three forces are equal and their resultant force is zero, then measure of its internal angle is: a)0° b)90° c)60° d)45°
Answer:
60
Explanation:
As the forces are equal and resultant force is 0 , it forms an equilateral triangle and equilateral triangle has an angle of 60 degrees
Hope this Helps U...,
thank u
A light plane must reach a speed of 33 m/s for takeoff. How long a runway is needed if the constant acceleration is 3.0 m/s2
Answer:
181.5 m
Explanation:
From the question,
Applying the equation of motion,
v² = u²+2as................. Equation 1
Where a = acceleration of the light plane, v = final velocity of the light plane, u = initial velocity of the light plane, s = length of the runway.
make s the subject of formula in equation 1
s = (v²-u²)/2a.............. Equation 2
Given: v = 33 m/s, u = 0 m/s(from rest), a = 3.0 m/s²
Substitute these values into equation 2
s = (33²-0²)/(2×3)
s = 1089/6
s = 181.5 m
Momentum of 0.5 kg moving ball with the velocity of 5 m / s
Answer:
2.5
Explanation:
Momentum = Mass × Velocity
Answer:
[tex] \boxed{ \bold{ \huge{\boxed{ \sf{2.5 \: kg \: m \: / \: s}}}}}[/tex]
Explanation:
Mass ( m ) = 0.5 kg
Velocity ( v ) = 5 m / s
Momentum ( p ) = ?
Finding the momentum
[tex] \boxed{ \sf{momentum \: ( \: p \: ) \: = \: mass \: \times \: velocity}}[/tex]
⇒[tex] \sf{momentum \: = \: 0.5 kg \times 5 \: meter \: \: per \: second}[/tex]
⇒[tex] \sf{momentum = 2.5 \: kg \: m \: / \: s}[/tex]
Hope I helped!
Best regards! :D
El tubo de entrada que suministra presión de aire para operar un gato hidráulico tiene 2 cm de diámetro. El pistón de salida es de 32 cm de diámetro. ¿Qué presión de aire se tendrá de aire se tendrá que usar para levantar un automóvil de 17,640 N?`
Answer:
P₁ = 219.3 Pa
Explanation:
This fluid mechanics problem, we can use that the pressure is distributed with the same value throughout the system, which is Pascal's principle.
Let's use the subinidce1 for the small diameter and the subscript 2 for the larger diameter.
P₁ = P₂
pressure is defined by
P = F / A
we subtitute
F₁ / A₁ = F₂ / A₂
F₁ = F₂ A₁ / A₂
the area in a circle is
A = π r² = π d² / 4
we substitute
F₁ = F₂ (d₁ / d₂)²
we calculate
F₁ = 17640 (2/32)²
F₁ = 68.9 N
Having the force to be applied we can find the air pressure on the small plunger
P₁ = F₁ / A₁
P₁ = F₁ 4 / π d₁²
let's calculate
P₁ = 68.9 4 / (π 0.02²)
P₁ = 219.3 Pa
How is the radiating electric field (or electromagnetic signal) produced when radio stations broadcast
Answer:
Radio stations have dipole type antennas
this field increases in intensity and propagates outwards,
Explanation:
Radio stations have dipole type antennas, that is, all sides are isolated from each other, when the AC signal from the radio station arrives, the lcharge begins at times and by the Lens law a field appears that opposes this movement, this field increases in intensity and propagates outwards, when the voltage reaches a maximum, the generated wave also reaches the maximum, now the incident wave begins to decrease, an electric hand appears to oppose this prisoner, and in this way a cap is created. electric .
For physics show-and-tell, you want to impress the class by sipping water through a long straw. If you hold the straw vertically, determine the length of the longest straw that you could, in principle, drink from in this manner._____ mAdditional Materials Show My Work (Optional)
Answer:
10.31 m
Explanation:
To find the result you have to use the formula: h = p / eg.
Where: e = 1000Kg/m^3 g=9.8m/s^2 p= 1.01 * 10^5 Pa
The calculation will be:
h= 1.01 * 10^5 / (1000kg/m^2) * (9.8m/s^2)
h= 10.31 m
What voltage battery would you need to send 2.5A of current through a light bulb of resistance 3.6 ohm
Current flow light bulb = 2.5[tex]\sf{A}[/tex]
Resistance of light bulb = 3.6Ω
To Find :We have to find voltage of battery[tex].[/tex]
Solution :➠ As per ohm's law, current flow through a conductor is directly proportional to the applied potential difference.
➝ V ∝ I
➝ V = I × R
Where, R is the resistance of conductor.
⇒ V = I × R
⇒ V = 2.5 × 3.6
⇒ V = 9 volt
A cheetah can run at a top speed of 85 mi/h . What is the distance it runs in half an hour?
Answer:
42.5 miles
Explanation:
To find the answer we need to know the formula:
Distance = speed x time
85 x 0.5 = 42.5 miles
Hope this helps!
what is force magnifier
Answer:
It is an instrument which increases the amount of force available to a single hypothetical person.
Examples;
Levers, pulleys are force magnifiers.
A wooden artifact is found in an ancient tomb. Its carbon-14 14 6 C activity is measured to be 55.0% of that in a fresh sample of wood from the same region. Assuming the same amount of 14C was initially present in the artifact as is now contained in the fresh sample, determine the age of the artifact (in years)
Answer:
[tex] t = 4.942\times10^{3}[/tex]
Explanation:
we know that
[tex]t =-\frac{ln\frac{R}{R_0} }{\lambda}[/tex]
the symbols have their usual meaning
Also,
[tex]t=-T_{1/2}\frac{ln\frac{R}{R_0} }{ln2}[/tex]
now plugging the values we get
[tex]t=-5730\frac{ln(0.55) }{ln(2)}[/tex]
[tex] t = 4.942\times10^{3}[/tex] years
A proton is located at <3 x 10^-10> m. What is r, the vector from the origin to the location of the proton
Complete Question
A proton is located at <3 x 10^{-10}, -5*10^{-10} , -5*10^{-10}> m. What is r, the vector from the origin to the location of the proton
Answer:
The vector position is [tex]\=r=<3*10^{-10}i-5*10^{-10}j -5*10^{-10}k>[/tex]
Explanation:
From the question we are told that
The position of the proton is [tex]<3 * 10^{-10}, -5*10^{-10} , -5*10^{-10}> m[/tex]
Generally the vector location of the proton is mathematically represented as
[tex]\= r = <xi + yj + zk>[/tex]
So substituting values
[tex]\=r=<3*10^{-10}i-5*10^{-10}j -5*10^{-10}k>[/tex]