What is the value of h?
Opposite=15cm
Sin(31°
Give your answer correct to one decimal place.

The equation for total cost is The Total cost = (10s + 5m + 8l + 0.5n)  

First, we can  calculate  the total cost plus the both the shipping and the handling charge:

The Small shirts is  10 x $5.00 = $50.00

Medium shirts is  5 x $7.50 = $37.50

Large shirts is 8 x $12.00 = $96.

Lets add  three amounts plus also the  shipping and  the handling charge to the over all total cost:

The Total cost  is  (10 x $5.00) + (5 x $7.50) + (8 x $12.00) + (23 x $0.50)

Total cost = 195.00

Therefore, the equation of  total cost is

The Total cost = (10s + 5m + 8l + 0.5n)  s, m, and l refer to the  prices of small, medium, and large shirts, respectively,  n is the total number of shirts.

let now substitute the  values of s, m, l, and n.

The Total cost = 10 x 5.00 + 5 x 7.50 + 8 x 12.00 + 23 x 0.50)  in  dollars

Therefore, the Total cost = $195.00

Learn more about total cost below.

https://brainly.com/question/25109150

#SPJ1

No, line m and line n are not parallel.

We have,

Two lines are parallel if and only if they have the same slope.

The slope of a line is a measure of how steep the line is, and it is given by the ratio of the change in the y-coordinate to the change in the x-coordinate as we move along the line.

The slopes of two parallel lines are equal, so if line m has a slope of -5/8, any parallel line would also have a slope of -5/8.

However, line n has a slope of 8/5, which is not equal to -5/8.

Therefore,

Line m and line n cannot be parallel.

Learn more about equation of a line here:

https://brainly.com/question/23087740

#SPJ1

The ordered pair (0, -5) is a solution of the given inequality.

To check if the ordered pair is a solution we need to replace the values of the ordered point in the inequality and check if it is true or not.

The inequality is:

x + y < -4

And the ordered pair is (0, -5)

Replacing that we will get:

0 - 5 < -4

-5 < -4

This is true, then the ordered pair is a solution.

LEarn more about inequalities at:

https://brainly.com/question/24372553

#SPJ1

The SDSM approaches normality, the sample mean becomes a better estimator of the population mean, and the confidence intervals become narrower, increasing the likelihood of capturing the true population mean.

a. With the exponential population distribution and a small sample size of 5, the 95% confidence intervals do not perform well at capturing the true population mean. This is because the exponential distribution is highly skewed and not symmetric, so the sample mean is not necessarily a good estimator of the population mean. Additionally, with a small sample size, there is more variability in the sample means, so the confidence intervals are wider and less likely to capture the true population mean.

b. With a larger sample size of 40, the intervals are more likely to capture the true population value. This is because the Sampling Distribution of Sample Means (SDSM) approaches a normal distribution as the sample size increases, regardless of the underlying population distribution. This is known as the Central Limit Theorem. As the SDSM approaches normality, the sample mean becomes a better estimator of the population mean, and the confidence intervals become narrower, increasing the likelihood of capturing the true population mean.

To learn more about population visit:

https://brainly.com/question/31544819

#SPJ11

The given series, Σ x^n/n, converges absolutely for x ∈ (-1,1] and diverges for x ≤ -1 or x > 1. The series converges conditionally at x = -1 and x = 1.

For the absolute convergence, we need to check whether Σ |x^n/n| converges or not. So, we have Σ |x^n/n| = Σ (|x|/n)^n. By applying the root test, we get lim (|x|/n) = 1, and hence, the series converges absolutely for |x| < 1. For x ≤ -1 or x > 1, the series diverges, since the terms of the series do not approach zero as n approaches infinity.

Now, for the conditional convergence, we need to check whether the series converges but the absolute value of the terms diverges. Since the series converges absolutely for |x| < 1, we only need to check the endpoints x = -1 and x = 1. For x = -1, we have the alternating harmonic series, which converges by the alternating series test. For x = 1, we have the harmonic series, which diverges. Therefore, the series converges conditionally at x = -1 and x = 1.

In conclusion, the given series converges absolutely for x ∈ (-1,1] and diverges for x ≤ -1 or x > 1. The series converges conditionally at x = -1 and x = 1.

Learn more about Series:

brainly.com/question/31583448

#SPJ11

Melody can make 9 gift bags, each containing 2 stickers, 3 candy bars, and 5 tangerines. This uses up all of the stickers, candy bars, and tangerines she has, and each gift bag is filled in the same way.

To find the largest number of gift bags Melody can make, we need to find the greatest common factor of 18, 27, and 45.

First, we can simplify each number by finding its prime factorization:

18 = 2 x 3 x 3
27 = 3 x 3 x 3
45 = 3 x 3 x 5

Next, we can identify the common factors:

- Both 18 and 27 have two factors of 3 in common
- 27 and 45 have one factor of 3 in common

The greatest common factor is the product of these common factors, which is 3 x 3 = 9.

Therefore, Melody can make 9 gift bags, each containing 2 stickers, 3 candy bars, and 5 tangerines. This uses up all of the stickers, candy bars, and tangerines she has, and each gift bag is filled in the same way.

To know more about the calculation of prime factorization visit:

https://brainly.com/question/29775157

#SPJ11

If we generate a large number of random points within the square, we can estimate the value of pi by counting the number of points that fall within the circle and dividing by the total number of points generated, then multiplying by 4. This is known as the Monte Carlo method for estimating pi.

To generate a random point within the square and check if it falls within the circle, follow these steps:

1. Generate random x and y coordinates: Choose a random number between 0 and 1 for both x and y coordinates. This can be done using a random number generator in programming languages, like Python or JavaScript.

To generate a random point in a square with vertices (0,0), (0,1), (1,0), (1,1), we need to randomly generate two coordinates, one for the x-axis and one for the y-axis. The x-coordinate must fall between 0 and 1, while the y-coordinate must also fall between 0 and 1. This can be done using a random number generator.

2. Calculate the distance from the origin: Use the distance formula to find the distance between the random point (x,y) and the origin (0,0). The formula is:

  Distance = √((x-0)² + (y-0)²) = √(x² + y²)
If this distance is less than or equal to 1, then the point falls within the circle centered at the origin with a  radius 1.
In other words, we can think of the circle as inscribed within the square. If a randomly generated point falls within the square, then it may or may not fall within the circle as well. The probability that a point falls within the circle is the ratio of the area of the circle to the area of the square. This probability is approximately equal to pi/4.

3. Check if the point is within the circle: If the distance calculated in step 2 is less than or equal to the radius of the circle (1 in this case), then the random point is within the circle. If the distance is greater than 1, the point lies outside the circle. We can generate a random point within the square and determine if it falls within the circle centered at the origin with a radius of 1.

Learn more about Square:

brainly.com/question/28776767

#SPJ11

Answer:

0.4 or 40%

Step-by-step explanation:

The sectors that are factors of 8 are 1, 2, 4, and 8 itself. Therefore, out of 10 equally sized sectors, 4 are factors of 8.

The probability of selecting a sector that is a factor of 8 is the ratio of the number of favorable outcomes to the total number of possible outcomes

So, the probability of selecting a sector that is a factor of 8 is:

4 (number of favorable outcomes) / 10 (total number of possible outcomes)

which simplifies to:

2/5 or 0.4

Therefore, the probability that the randomly selected point lies in a sector that is a factor of 8 is 0.4 or 40%.

Answer:

2/10 meaning 20%

Step-by-step explanation:

The researcher's fixed effects regression can provide reliable estimates of the effects of age, education, union status, and previous year's earnings on earnings if the data is accurate, the model accounts for unobservable individual characteristics, and there is no endogeneity issue between the regressors and earnings.

A fixed effects regression can provide reliable estimates of the effects of the regressors (age, education, union status, and previous year's earnings) on earnings if the following conditions are met:

1. The regressors are accurately measured, and there is enough variation in the data to capture their effects on earnings.
2. The fixed effects model accounts for all unobservable, time-invariant individual characteristics that may affect earnings. This helps control for omitted variable bias, which could otherwise lead to biased estimates.
3. There is no issue of endogeneity, such as reverse causality or simultaneity, between the regressors and the dependent variable (earnings). If this condition is not met, the estimates will be biased and inconsistent.

To learn more about fixed effects regression models visit : https://brainly.com/question/29563847

#SPJ11

The probability that a person owns a Chevy, given that the truck has four-wheel drive, can be found using conditional probability. The formula for conditional probability is: P(A | B) = P(A ∩ B) / P(B)

To determine the probability that the person owns a Chevy given that the truck has four-wheel drive, we need to use Bayes' Theorem. Let A be the event that the person owns a Chevy and B be the event that the truck has four-wheel drive.

Bayes' Theorem states that:

P(A | B) = P(B | A) * P(A) / P(B)

- P(A | B) is the probability that the person owns a Chevy given that the truck has four-wheel drive (what we want to find).
- P(B | A) is the probability that the truck has four-wheel drive given that the person owns a Chevy. This information is not given, so we cannot determine this probability directly.
- P(A) is the prior probability that the person owns a Chevy (i.e., the probability before we know anything about the truck). This information is also not given, so we cannot determine this probability directly.
- P(B) is the probability that the truck has four-wheel drive.

Without any additional information, we cannot calculate P(A) or P(B | A). However, we can make some assumptions to simplify the problem. Let's assume that:

- There are only two brands of trucks: Chevy and Ford.
- Each brand is equally likely to have four-wheel drive.
- The person is equally likely to own a Chevy or a Ford.

Under these assumptions, we can calculate P(B) as follows:

P(B) = P(B | A) * P(A) + P(B | not A) * P(not A)
    = 0.5 * 0.5 + 0.5 * 0.5
    = 0.5

Here, P(B | not A) is the probability that the truck has four-wheel drive given that the person does not own a Chevy. Since there are only two brands of trucks and each is equally likely, P(B | not A) = 0.5. P(not A) is the probability that the person does not own a Chevy, which is also 0.5 under our assumptions.

Now we can use Bayes' Theorem to calculate P(A | B):

P(A | B) = P(B | A) * P(A) / P(B)
        = P(B | A) * P(A) / (P(B | A) * P(A) + P(B | not A) * P(not A))
        = P(B | A) * P(A) / 0.5

We still don't know P(A) or P(B | A), but we can see that they cancel out in the equation. Therefore, under our assumptions, the probability that the person owns a Chevy given that the truck has four-wheel drive is simply the probability that the person owns a Chevy:

P(A | B) = P(A) = 0.5

So if we assume that Chevy and Ford are equally likely to have four-wheel drive, and the person is equally likely to own a Chevy or a Ford, then the probability that the person owns a Chevy given that the truck has four-wheel drive is 0.5.

To learn more about probability, click here:

brainly.com/question/30034780

#SPJ11

The equation of the line in this problem can be given as follows:

The point-slope equation of a line is given as follows:

y - y* = m(x - x*).

In which:

From the graph, we have that when x increases by 3, y decays by 6, hence the slope m is given as follows:

m = -6/3

m = -2.

Hence the point-slope equation is given as follows:

y - 4 = -2(x + 2).

The slope-intercept equation can be obtained as follows:

y = -2x - 4 + 4

y = -2x.

More can be learned about linear functions at brainly.com/question/15602982

#SPJ1

Answer:

26 units

Step-by-step explanation:

The distance between two points with coordinates

The correct answer is A. The sampling distribution of x is approximately normal with mean µx = 40 and standard error σx = $0.95.

From the central limit theorem, we know that the sampling distribution of the sample mean (x) will be approximately normal, regardless of the underlying distribution of the population, as long as the sample size is large enough (n ≥ 30). In this case, n = 40, which is large enough, so we can assume that the sampling distribution of x will be approximately normal.

The mean of the sampling distribution of x will be the same as the mean of the population distribution, which is $40. The standard deviation of the sampling distribution of x (also known as the standard error) can be calculated as σ/√n, where σ is the standard deviation of the population distribution. In this case, σ = $6 and n = 40, so the standard error is $6/√40 ≈ $0.95.

Therefore, the correct answer is (A): The sampling distribution of x is approximately normal with mean x = 40 and standard error x = $0.95.

To learn more about mean, click here:

brainly.com/question/31101410

#SPJ11

δ²f/δx² = 1/3 (x^2 + y^2 + z^2)^(-7/6) * (1 - 7x^2/(x^2 + y^2 + z^2))

δ²f/δy² = 1/3 (x^2 + y^2 + z^2)^(-7/6) * (1 - 7y^2/(x^2 + y^2 + z^2))

δ²f/δz² = 1/3 (x^2 + y^2 + z^2

To show that the function f(x,y,z) = (x^2 + y^2 + z^2)^(-1/6) satisfies the three-dimensional Laplace equation, we need to calculate its second-order partial derivatives with respect to x, y, and z and verify that their sum is zero:

δ²f/δx² = δ/δx (δf/δx) = δ/δx [-1/6 (x^2 + y^2 + z^2)^(-7/6) * 2x]

= 1/3 (x^2 + y^2 + z^2)^(-7/6) * (1 - 7x^2/(x^2 + y^2 + z^2))

δ²f/δy² = δ/δy (δf/δy) = δ/δy [-1/6 (x^2 + y^2 + z^2)^(-7/6) * 2y]

= 1/3 (x^2 + y^2 + z^2)^(-7/6) * (1 - 7y^2/(x^2 + y^2 + z^2))

δ²f/δz² = δ/δz (δf/δz) = δ/δz [-1/6 (x^2 + y^2 + z^2)^(-7/6) * 2z]

= 1/3 (x^2 + y^2 + z^2)^(-7/6) * (1 - 7z^2/(x^2 + y^2 + z^2))

Now we can verify that their sum is indeed zero:

δ²f/δx² + δ²f/δy² + δ²f/δz²

= 1/3 (x^2 + y^2 + z^2)^(-7/6) * [(1 - 7x^2/(x^2 + y^2 + z^2)) + (1 - 7y^2/(x^2 + y^2 + z^2)) + (1 - 7z^2/(x^2 + y^2 + z^2))]

= 1/3 (x^2 + y^2 + z^2)^(-7/6) * [3 - 7(x^2 + y^2 + z^2)/(x^2 + y^2 + z^2)]

= 1/3 (x^2 + y^2 + z^2)^(-7/6) * [-4]

= 0

Therefore, the function f(x,y,z) = (x^2 + y^2 + z^2)^(-1/6) satisfies the three-dimensional Laplace equation.

To find the second-order partial derivatives of f(x,y,z) with respect to x, y, and z, we can use the expressions derived earlier:

δ²f/δx² = 1/3 (x^2 + y^2 + z^2)^(-7/6) * (1 - 7x^2/(x^2 + y^2 + z^2))

δ²f/δy² = 1/3 (x^2 + y^2 + z^2)^(-7/6) * (1 - 7y^2/(x^2 + y^2 + z^2))

δ²f/δz² = 1/3 (x^2 + y^2 + z^2

To learn more about derivatives visit:

https://brainly.com/question/8791755

#SPJ11

(a) The eigenvalues of the rotation matrix T by π/3 are (1/4) + √3/4 and (1/4) - √3/4 with corresponding eigenvectors [-√3/2, 1/2] and [√3/2, 1/2].

(b) The eigenvalue 1 is always present for any rotation matrix T in R3 around an axis L, with the corresponding eigenspace being the subspace of R3 spanned by all vectors parallel to L.

(a) The matrix representation of the linear transformation T: R2 → R2, rotation by π/3 is:

T = [tex]\begin{bmatrix} \cos(\pi/3) & -\sin(\pi/3) \\ \sin(\pi/3) & \cos(\pi/3) \end{bmatrix}$[/tex]

The characteristic polynomial of T is given by:

det(T - λI) = [tex]$\begin{bmatrix} \cos(\pi/3)-\lambda & -\sin(\pi/3) \\ \sin(\pi/3) & \cos(\pi/3)-\lambda \end{bmatrix}$[/tex]

Expanding the determinant, we get:

det(T - λI) = λ² - cos(π/3)λ - sin²(π/3)

= λ² - (1/2)λ - (3/4)

Using the quadratic formula, we can solve for the eigenvalues:

λ = (1/4) ± √3/4

Therefore, the eigenvalues of T are (1/4) + √3/4 and (1/4) - √3/4.

To find the corresponding eigenvectors, we can solve the system (T - λI)x = 0 for each eigenvalue.

For λ = (1/4) + √3/4, we have:

(T - λI)x = [tex]$\begin{bmatrix} \cos(\pi/3) - (1/4+\sqrt{3}/4) & -\sin(\pi/3) \\ \sin(\pi/3) & \cos(\pi/3) - (1/4+\sqrt{3}/4) \end{bmatrix}$[/tex]

Row reducing the augmented matrix [T - λI | 0], we get:

[tex]$\begin{bmatrix} -\sqrt{3}/2 & -1/2 & | & 0 \\ 1/2 & -\sqrt{3}/2 & | & 0 \\ 0 & 0 & | & 0 \end{bmatrix}$[/tex]

Solving for the free variable, we get:

x = [tex]$t\begin{bmatrix} -\sqrt{3}/2 \\ 1/2 \end{bmatrix}$[/tex]

Therefore, the eigenvector corresponding to λ = (1/4) + √3/4 is [-√3/2, 1/2].

Similarly, for λ = (1/4) - √3/4, we have:

(T - λI)x = [cos(π/3) - (1/4 - √3/4) -sin(π/3)]

[sin(π/3) cos(π/3) - (1/4 - √3/4)]

Row reducing the augmented matrix [T - λI | 0], we get:

[tex]$\begin{bmatrix} \sqrt{3}/2 & -1/2 \\ 1/2 & \sqrt{3}/2 \end{bmatrix} \begin{bmatrix} x \ y \end{bmatrix} = \begin{bmatrix} 0 \ 0 \end{bmatrix}$[/tex]

Solving for the free variable, we get:

x = [tex]$t\begin{bmatrix} -\sqrt{3}/2 \\ 1/2 \end{bmatrix}$[/tex]

Therefore, the eigenvector corresponding to λ = (1/4) - √3/4 is [√3/2, 1/2].

(b) The axis L is an invariant subspace of T, which means that any vector parallel to L is an eigenvector of T with eigenvalue 1. This is because rotation around an axis does not change the direction of vectors parallel to the axis.

Therefore, λ = 1 is always an eigenvalue of T. The corresponding eigenspace is the subspace of R3 that is spanned by all vectors parallel to L.

Learn more about the matrix at

https://brainly.com/question/31391960

#SPJ4

The simplified answer after Simplification of (1/2 - 1/3)(4/5 - 3/4) / (1/2 + 2/3 + 3/4) is 7/36.

To solve this expression, we need to follow the order of operations, which is parentheses, multiplication/division, and addition/subtraction.

First, we simplify the expression inside the parentheses:

(1/2 - 1/3)(4/5 - 3/4) = (1/6)(1/5) = 1/30

Next, we add up the denominators in the denominator of the entire expression:

1/2 + 2/3 + 3/4 = 6/12 + 8/12 + 9/12 = 23/12

Finally, we divide the simplified expression inside the parentheses by the fraction in the denominator:

(1/30) / (23/12) = (1/30) x (12/23) = 4/230 = 2/115 = 7/36

Therefore, the simplified answer is 7/36.

Learn more about Simplification

https://brainly.com/question/28008382

#SPJ4

Step-by-step explanation:

remember, a negative exponent means 1/...

so,

3^-3 = 1/3³ = 1/27

Answer:

1/27

Step-by-step explanation:

(a) The number of ways that the event can occur is 6.

(b) Probabilities are :

1) 1/2, 2) 1/6 and 3) 1/3.

(a) Given a bag of different shapes.

Total number of shapes = 6

So, if we select one shape from random,

total number of ways that the event can occur = 6

(b) Number of squares in the bag = 3

Probability of choosing a square = 3/6 = 1/2

Number of circles in the bag = 1

Probability of choosing a circle = 1/6

Number of stars in the bag = 2

Probability of choosing a star = 2/6 = 1/3

Hence the required probabilities are found.

Learn more about Probability here :

https://brainly.com/question/14210034

#SPJ1

Answer:a to b is 21 and b to c is 6 so I think you would need 21+6 divided by 2 i don't know for sure.

Step-by-step explanation:

Yes, you can use an objective function for tabulated data (x and y) to find the minimum value of y. Here's an example:

Step 1: Obtain the tabulated data. Let's consider the following data points:

x: 1, 2, 3, 4, 5
y: 3, 1, 4, 2, 5

Step 2: Define an objective function, such as the least squares method, which minimizes the difference between the observed values and the values predicted by a model. In this case, let's use a simple linear model: y = mx + b, where m is the slope and b is the y-intercept.

Step 3: Compute the error between the observed values and the predicted values using the model for each data point, and then square and sum these errors. The objective function will be:

E(m, b) = Σ[(y_observed - (mx + b))^2]

Step 4: Use an optimization algorithm, like gradient descent, to find the optimal values of m and b that minimize the objective function E(m, b).

Step 5: Once you have found the optimal m and b, you can use the linear model to predict y values for any given x value. To find the minimum value of y in the observed data, simply identify the smallest y value in the dataset.

In this example, the minimum value of y is 1, which corresponds to x = 2.

learn more about "minimum value":-https://brainly.com/question/26100401

#SPJ11

The probability that the subject actually has an IQ below 150 given that they are labeled as having an IQ over 150 is approximately 0.00073276, or 0.07328% when rounded to five decimal places.

Let's use Bayes' theorem to solve the problem. Let A be the event that the subject has an IQ over 150, and B be the event that the subject actually has an IQ below 150. We want to find P(B|A), the probability that the subject has an IQ below 150 given that they are labeled as having an IQ over 150.

From the problem, we know that P(A) = 1/1100, the probability that a random person has an IQ over 150. We also know that P(A|B') = 0.0008, the probability that someone with an IQ below 150 is labeled as having an IQ over 150 due to lucky guessing.

To find P(B|A), we need to find P(A|B), the probability that someone with an IQ below 150 is labeled as having an IQ over 150. We can use Bayes' theorem to find this probability:

P(A|B) = P(B|A) * P(A) / P(B)

We know that P(B) = 1 - P(B'), the probability that someone with an IQ below 150 is not labeled as having an IQ over 150. Since everyone with an IQ over 150 is labeled as such, we have:

P(B) = 1 - P(A')

where P(A') is the probability that a random person has an IQ below 150 or, equivalently, 1 - P(A).

Plugging in the given values, we have:

P(A|B) = P(B|A) * P(A) / (1 - P(A))

P(A|B) = P(B|A) * 1/1100 / (1 - 1/1100)

P(A|B) = 0.0008 * 1/1100 / (1 - 1/1100)

P(A|B) ≈ 0.00073276

Therefore, the probability that the subject actually has an IQ below 150 given that they are labeled as having an IQ over 150 is approximately 0.00073276, or 0.07328% when rounded to five decimal places.

To learn more about probability visit:

https://brainly.com/question/30034780

#SPJ11

The inequality that shows the values of w that will not exceed the weight of an elevator is: w ≤ 357.

The inequality that shows the values of w that will not exceed the weight of Let's call the weight of the crate "w" in pounds.

The total weight of the elevator with the delivery man and the crate will be:

1400 + 243 + w = 1643 + w

To make sure the weight of the elevator doesn't exceed the maximum load of 2000 pounds, we need to set up an inequality:

1643 + w ≤ 2000

To solve for w, we can start by subtracting 1643 from both sides:

w ≤ 357

So the weight of the crate cannot exceed 357 pounds in order to ensure that the elevator doesn't exceed its maximum load capacity.

Therefore, the inequality that shows the values of w that will not exceed the weight of an elevator is:

w ≤ 357.an elevator is: w ≤ 357.

To know more about  weight, here

https://brainly.com/question/86444

#SPJ4

The measure of the missing side is given as follows:

D. 22.2

The three trigonometric ratios are the sine, the cosine and the tangent, and they are defined as follows:

The parameters for this problem are given as follows:

Hence the missing side length is obtained as follows:

sin(59º) = 19/x.

x = 19/sine of 59 degrees

x = 22.2.

More can be learned about trigonometric ratios at brainly.com/question/24349828

#SPJ1

Answer:

3.8

Step-by-step explanation:

The value of circumferences of both circles to the nearest hundredth are 28.27 ft and 44ft.

Since, We know that;

The circumference of a form is the space surrounding its edge. Find the circumference of various forms by summing the lengths of their sides.

Given two coincide circles, the Radius of the smaller circle is 4.5ft.

Since the diameter is 9 ft.

Since, the bigger circle is 2.5 ft wider than the smaller circle,

Thus, the radius of the bigger circle = 4.5 + 2.5

Hence, the radius of the bigger circle = 7

From the formula for the circumference of a circle:

Circumference = 2π × radius

Thus,

The circumference of the yellow(bigger) circle is about = 2 x pi x 7

The circumference of the yellow(bigger)  circle is about = 44 ft

The circumference of the purple(smaller) circle is about = 2 x pi x 4.5

The circumference of the purple(smaller) circle is about = 28.274 ft

therefore, The circumference of the yellow circle is about 44 ft. The circumference of the purple circle is about 28.27ft.

Learn more about circumference here:

brainly.com/question/6465134

#SPJ1

The Circumference of the yellow circle is about 44 ft.

The circumference of the purple circle is about 28.27ft.

We have,

Radius of the smaller circle is 4.5ft

and radius of the bigger circle = 4.5 + 2.5 = 7 ft

Now, Circumference of Bigger circle (yellow) = 2 x π x r

= 2(3.14)(7)

= 44 ft

and, Circumference of Smaller circle (Purple) = 2 x π x r

= 2(3.14)(4.5)

= 28.274 ft

Learn more about circumference here:

brainly.com/question/6465134

#SPJ1

The dimension of this subspace is 4 because any invertible matrix can be written as a linear combination of the matrices:

[1 0] [0 1]

[0 0] [0 0]

[0 0] [0 0]

[0 1] [1 0]

a) Not a subspace, reason: the collection does not contain the zero matrix, which is a requirement for any subset to be a subspace.

b) Subspace, dimension = 4. This collection satisfies the three properties of being a subspace:

Contains the zero matrix: Since the determinant of the zero matrix is 0, it is not invertible. Therefore, it is not in the collection.

Closed under addition: If A and B are invertible matrices, then (A + B) is also invertible. Thus, (A + B) belongs to the collection.

Closed under scalar multiplication: If A is an invertible matrix and c is a scalar, then cA is invertible. Therefore, cA belongs to the collection.

The dimension of this subspace is 4 because any invertible matrix can be written as a linear combination of the matrices:

[1 0] [0 1]

[0 0] [0 0]

[0 0] [0 0]

[0 1] [1 0]

To learn more about multiplication visit:

https://brainly.com/question/14059007

#SPJ11

The particle is momentarily at rest at t = 6 seconds. Thus, the correct answer choice is :

(b) 6 s

To find the time t when the particle is momentarily at rest, we need to determine when its velocity is equal to zero. The given position function is x(t) = 36t - 3.0t^2. The velocity function can be found by taking the derivative of x(t) with respect to time t:

v(t) = dx(t)/dt = 36 - 6.0t

To find when the particle is momentarily at rest, set v(t) equal to zero:

0 = 36 - 6.0t

Now, solve for t:

6.0t = 36
t = 6 seconds

So, the particle is momentarily at rest at t = 6 seconds, which corresponds to answer choice B) 6 s.

To learn more about velocity visit : https://brainly.com/question/80295?source=archive

#SPJ11