Answer:
Dipole induced dipole force of attraction.
Explanation:
This is because dipole induced dipole attraction is a weak force of attraction or london force that occur when a polar molecule causes a form induction in a dipole in an atom or in a nonpolar molecule by altering the arrangement non polar electrons.
4. Write the chemical formula for each of the following:
Calcium oxide - Copper (II) nitrate - Ammonium chloride-
Magnesium sulphate - Copper (1) oxide - Calcium chloride.
Answer:
Calcium oxide: CaO
Copper (II) nitrate: Cu(NO₃)₂
Ammonium chloride: NH₄Cl
Magnesium sulfate: MgSO₄
Copper (I) oxide: Cu₂O
Calcium chloride: CaCl₂
Explanation:
Hello there!
In this case, according the IUPAC rules for naming this inorganic salts, whereas calcium, copper (II), ammonium, magnesium and copper (I) are the cations and oxide, nitrate, chloride and sulfate are the anions, we proceed as follows:
Calcium oxide: CaO
Copper (II) nitrate: Cu(NO₃)₂
Ammonium chloride: NH₄Cl
Magnesium sulfate: MgSO₄
Copper (I) oxide: Cu₂O
Calcium chloride: CaCl₂
Best regards!
Which type of formula shows an element symbol for each atom and a line for each bond between atoms?
structural
molecular
empirical
ionic
Answer: structural
Explanation:
When metals and non metals combine in fixed proportion then a chemical compound is formed. Structural formula shows an element symbol for each atom and a line for each bond between atoms. The correct option is option A.
What is chemical formula?Chemical formula is a formula where cation and anion combine to form a molecule in fixed proportion. Metals combine in form of cation and non metals combine in form of anion.
Cation is the species that give electron and attain positive charge while anion is a species which gain electron and attains negative charge so when anion and cation combine in fixed ration the the overall charge of the molecule is zero that is molecule is neutral.
Out of given structural is a 3D representation of any chemical formula, in which symbol of each element is shown .Along with symbol line for each bond between atoms is also shown.
Therefore, the correct option is option A.
To learn more about Chemical formula, here:
https://brainly.com/question/28522480
#SPJ2
1120 KG car is traveling with a speed of 40 M/S find its energy
Answer:
252 Joules
Explanation:
I thin k this is right, im so sorry if not!! :)
How are compositional layers distinguished?
Explanation:
The Earth has different compositional and mechanical layers. Compositional layers are determined by their components, while mechanical layers are determined by their physical properties.
The Earth has different compositional and mechanical layers. Compositional layers are determined by their components, while mechanical layers are determined by their physical properties.Information about the compositional layers
The Earth has different compositional and mechanical layers. Compositional layers are determined by their components, while mechanical layers are determined by their physical properties.Information about the compositional layersLayer Definition Depth
The Earth has different compositional and mechanical layers. Compositional layers are determined by their components, while mechanical layers are determined by their physical properties.Information about the compositional layersLayer Definition DepthCrust :The outermost solid layer of a rocky planet or natural satellite. Chemically distinct from the underlying mantle. 0-100km silicates
The Earth has different compositional and mechanical layers. Compositional layers are determined by their components, while mechanical layers are determined by their physical properties.Information about the compositional layersLayer Definition DepthCrust :The outermost solid layer of a rocky planet or natural satellite. Chemically distinct from the underlying mantle. 0-100km silicatesMantle :A layer of the Earth (or any planet large enough to support internal stratification) between the crust and the outer core. It is chemically distinct from the crust and the outer core. The mantle is not liquid. It is, however, ductile, or plastic, which means that on very long time scales and under pressure it can flow. The mantle is mainly composed of aluminum and silicates. 100-2900km iron and magnesium silicates
The Earth has different compositional and mechanical layers. Compositional layers are determined by their components, while mechanical layers are determined by their physical properties.Information about the compositional layersLayer Definition DepthCrust :The outermost solid layer of a rocky planet or natural satellite. Chemically distinct from the underlying mantle. 0-100km silicatesMantle :A layer of the Earth (or any planet large enough to support internal stratification) between the crust and the outer core. It is chemically distinct from the crust and the outer core. The mantle is not liquid. It is, however, ductile, or plastic, which means that on very long time scales and under pressure it can flow. The mantle is mainly composed of aluminum and silicates. 100-2900km iron and magnesium silicatesCore: The innermost layers of the Earth. The Earth has an outer core (liquid) and an inner core (solid). They are not chemically distinct from each other, but they are chemically distinct from the mantle. The core is mainly composed of nickel and iron. 2900-6370km meta
A ball of ice, rock, dust, and gas that orbits the Sun is called a(n) comet. asteroid. meteor. meteorite.
Answer: comet
Explanation: :)
What is the air pressure on top of the mountain?
Explanation:
At sea level, the atmospheric pressure would be a little over 100 kPa (one atmosphere or 760 mm Hg). If we climb to the top of Mount Everest (the highest mountain in the world at 29,029 feet or 8848 meters), the atmospheric pressure will drop to slightly over 30 kPa (about 0.30 atmospheres or 228 mm Hg).
Hope it is helpful for you
The psalm which begins the lord is my shepherd is the ______. (what number ?)
Answer:
Psalm 23Explanation:
Psalm 23 vs 1 : The Lord is my Shepherd, I shall not want.
Answer:
Psalms 23:1The LORD is my shepherd ; i shall not want.Hope it helps#CarryOnLearning
What is the total number of atoms in ammonium hydroxide?
I will give Brainliest! :)
Answer:Ammonia is a compound that contains one nitrogen atom and three hydrogen atoms. Ordinarily having a characteristic of a pungent and gaseous compound.
Elemet: Hydrogen, Symbol: H, # of Atoms:5
Elemet:Nitrogen, Symbol: N, # of Atoms:1
Elemet:Oxygen, Symbol: O, #of Atoms:1
Explanation:
The number of atoms presennt in one mole of ammonium hydroxide is 6.02 * 10^23 atoms.
What is the mole?The mole refers to the amount of a substance that can be used as a reference. According to Avogadro, one mole of a substance contains 6.02 * 10^23 atoms, molecules, ions etc.
In that case, we can say that the number of atoms presennt in one mole of ammonium hydroxide is 6.02 * 10^23 atoms.
Learn more about mole: https://brainly.com/question/3393755?
How much water would I need to add to 700 mL of a 2.7 M KCl solution to make a 1.0 M solution?
Answer:
[tex]1190\ \text{mL}[/tex]
Explanation:
[tex]M_1[/tex] = Initial Concentration of KCl = 2.7 M
[tex]V_1[/tex] = Volume of KCl = 1 M
[tex]M_2[/tex] = Final concentration of KCl = 1 M
[tex]V_2[/tex] = Amount of water
We have the relation
[tex]M_1V_1=M_2V_2\\\Rightarrow V_2=\dfrac{M_1V_1}{M_2}\\\Rightarrow V_2=\dfrac{2.7\times 700}{1}\\\Rightarrow V_2=1890\ \text{mL}[/tex]
The amount of water that is to be added is [tex]1890-700=1190\ \text{mL}[/tex].
Why is it expensive to bring electricity into urban areas?
Answer:
Power plants are not located in cities. Power has to travel a long distance over power lines to reach cities.
Explanation:
a 55g block of metal has a specific heat of 0.45 J/g°C. What will be the temperature change of this metal if 450 J of heat energy are added
Answer:
Change in temperature (Δt) = 18.18°C (Approx.)
Explanation:
Given:
Mass of metal block (M) = 55g
Specific heat of metal (c) = 0.45 J/g°C
Amount of energy added (Q) = 450 J
Find:
Change in temperature (Δt)
Computation:
Using Specific Heat Energy formula
Q = McΔt
450 = (55)(0.45)(Δt)
450 = (24.75)(Δt)
Change in temperature (Δt) = 450 / 24.75
Change in temperature (Δt) = 18.18°C (Approx.)
How can flame color identify an unknown metal?
How can a spectrum positively identify an element?
How can astronomers tell which elements a star contains without a sample of it?
3 attempts left
Check my work
Enter your answer in the provided box.
The pressure inside a 1.0 L balloon at 25°C was 750 mm Hg. What is the pressure (in mmHg) inside the
balloon when it is cooled to -65°C and expands to 3.3 L in volume?
mm Hg
Answer:
shhsss×<×>×××<××××
Explanation:
4×738×8<#329×
Franklin was performing an experiment by combining hydrochloric acid and sodium hydroxide. He measured the mass of his reactant materials to be 35g. The reaction resulted in the production of salt and water. He reported that his products weighed 32g. Which best describes the results of Franklin’s experiment? No error occurred, some of the products are always lost as heat. An error occurred, the mass of the reactants should equal the mass of the products. An error occurred, the products should weigh more than the reactants. No error occurred, water is not weighed when determining the weight of the products.
Answer:
B) an error occurred, the mass of the reactants should equal the mass of the products.
Explanation:
The answer choices are:
A) no error occurred, some of the products are always lost as heat.
B) an error occurred, the mass of the reactants should equal the mass of the products.
C) an error occurred, the products should weigh more than the reactants.
D) no error occurred, water is not weighed when determining the weight of the products.
SolutionThe basis to answer this question is the law of conservation of mass.
Any chemical reaction satisfies the law of conservation of mass: mass cannot be either created nor destroyed, so, always, the mass of the reactants equal the mass of the products.
Thus, since he measured the mass of his reactant materials to be 35g and he reported that his products weighed 32g, his data are in clear contradiction of the law of conservation of mass. So, there is an error in his results: the mass of the reactants should equal the mass of the products.
An error occurred, the mass of the reactants should equal the mass of the products according to law of conservation of mass for the given experiment. Therefore, the correct option is option B.
The mass of the reactants and products in a chemical reaction should be equal, in accordance with the law of conservation of mass. This implies that there is no net change in mass during the chemical process. The mass of the reactants and products in a chemical reaction should be equal, in accordance with the law of conservation of mass. This implies that there is no net change in mass during the chemical process.
Franklin determined the mass of the reactant components in this instance to be 35g, and the products of the reaction weighed 32g. An error occurred because the mass of the reactants should equal the mass of the products, but the mass of the products is less than the mass of the reactants.
Therefore, the correct option is option B.
To know more about law of conservation of mass, here:
https://brainly.com/question/28711001
#SPJ7
Which is an application of genetic engineering?
A.
destroying all bacteria
B.
creating synthetic insulin
C.
producing cells from nonliving material
D.
preventing weeds from spreading to farmland
Answer:
B. Creating synthetic insulin
Explanation:
In medicine, genetic engineering has been used to mass-produce insulin, human growth hormones, Follistim (for treating infertility), human albumin, monoclonal antibodies, antihemophilic factors, vaccines, and many other drugs. In research, organisms are genetically engineered to discover the functions of certain genes.
It’s due in 3 minutes please help
Answer:
The Answer is gonna be Indroduction of non-native plant species
Phosphorus reacts with oxygen to produce different kinds
of oxides. One of these oxides is formed when 1.347 g of
phosphorus reacts with 1.744 g of oxygen. What is the
simplest formula of this oxide?
Answer:
check below
Explanation:
You can find the empirical formula of phosphorus oxide
P O
____ ____
1.347g 1.744
1.347/ 31 1.744/ 16
0.043 0.109
0.043/ 0.043 0.109/ 0.043
1 : 2.5
2 : 5
P2O5
The product(s) of a heated reaction of N,N-ethylmethylpentanamide with sodium hydroxide would be __________. View Available Hint(s) The product(s) of a heated reaction of N,N-ethylmethylpentanamide with sodium hydroxide would be __________. sodium pentanoic acid and ethylmethylamine pentanoic acid and ethylmethylamine sodium propanoate and pentylamine sodium pentanoate and ethylmethylamine
Answer:
sodium pentanoate and ethylmethylamine
Explanation:
The reaction of N,N-ethylmethylpentanamide with sodium hydroxide involves an amide and an inorganic hydroxide.
The CO-N bond is highly polar hence the -N(C2H5) (CH3) moiety is easily lost and replaced by the -ONa leading to the formation of sodium pentanoate.
The H^+ combines with -N(C2H5) (CH3) to yield ethylmethylamine
5.36 liters of nitrogen gas are at STP. What would be the new volume if we increased the moles from 3.5 moles to 6.0 moles?
Answer:
[tex]V_2=9.20L[/tex]
Explanation:
Hello there!
In this case, according to the given STP (standard pressure and temperature), it is possible for us to realize that the equation to use here is the Avogadro's law as a directly proportional relationship between moles and volume:
[tex]\frac{V_2}{n_2}= \frac{V_1}{n_1}[/tex]
In such a way, given the initial volume and both initial and final moles, we can easily compute the final volume as shown below:
[tex]V_2= \frac{V_1n_2}{n_1} \\\\V_2=\frac{5.36L*6.0mol}{3.5mol}\\\\V_2=9.20L[/tex]
Best regards!
When 3.52 g of bismuth oxide (molar mass - 465.96 g/ml) reacts with excess carbon to form 2.91 g of bismuth metal (molar mass-208.98) according to the equation:
Bi2O3(s) + 3C(s) = 2 Bi(s) + 3 CO(g)
24
What is the percent yield of the reaction?
(Answer to 1 decimal place)
25
Calculate the number of moles in 40g of Al(OH)3
Answer:
oo it's from chemistry
Explanation:
I am little week in chemistry so sorry
Which resources are unevenly distributed throughout Earth?
Select all that apply.
oil
soil
iron
oxygen
Answer:
Some natural resources like sunlight and wind are found everywhere, but other natural resources are unevenly distributed. Resources like oil, coal, and natural gas are only found where conditions were favorable to grow and preserve large quantities of animal or plant matter.
Explanation:
help me to solve this
Answer: The average atomic mass of nitrogen is 14.0066 amu
Explanation:
Mass of isotope N-14 = 14.00307 amu
% abundance of isotope N-14= 99.64% = [tex]\frac{99.64}{100}[/tex]
Mass of isotope N-13 = 15.0001 amu
% abundance of isotope N-13= (0.36)% = [tex]\frac{0.36}{100}[/tex]
Formula used for average atomic mass of an element :
[tex]\text{ Average atomic mass of an element}=\sum(\text{atomic mass of an isotopes}\times {{\text { fractional abundance}})[/tex]
[tex]A=\sum[(14.00307)\times \frac{99.64}{100})+(15.0001)\times \frac{0.36}{100}]][/tex]
[tex]A=14.0066amu[/tex]
Therefore, the average atomic mass of nitrogen is 14.0066 amu
how many grams of Na2SO4, (molar mass =142.0 g/mol) are there in 15 mL of 0.50 m Na2SO4 solution?
Answer:
1.1 g Na2SO4
Explanation:
First convert mL to L. Then multiply by the Molarity to get moles, then multiply by the molar mass to get grams.
15 mL x 1 L x 0.50 mol Na2SO4 x 142 g = 1.1 g
10^3 mL 1 L mol Na2SO4
In a formula unit, there are 48 gram of Na2SO4 atoms of each element. In terms of molar mass (gram mass unit): 45.98 g Na2SO4 in total 142.04 g sodium sulphate
How many moles of Na2SO4 are there?A mole of sodium sulphate is created when two moles of sodium (45.98 g), one mole of sulphur (32.06 g), and four moles of oxygen (64.00 g) are combined (142.04 g).
The atomic mass of sodium sulphite is equal to 10 moles times the molecular mass, or 1260 grams. Consequently, 1260 grams are the mass of 10 moles of sodium sulphite (Na2SO4).
We first obtain the atomic weights of the different elements in a periodic table in order to compute the molar mass of a molecule. Then, we multiply the total number of atoms by each one's atomic mass. Finally, we calculate the molar mass by combining all the atomic masses.
To learn more about Na2SO4 refer to:
https://brainly.com/question/3047839
#SPJ2
2. Water is an excellent solvent. With water being a polar
molecule, it can be an especially strong solvent for other
polar molecules. Give an example of how water acting as a
solvent is important for living organisms.
NO LINKS PLZ HELP
Answer:
Water acts as a solvent of carbon dioxide excreted from tissues, in blood and helps in regulating pH (because it forms carbonic acid that lowers pH when it tends to get higher). Blood pH should be maintained at about 7.4. One major reason is that the structure of protein is dependent ton pH because pH determines its ionization hence also affecting the charges and interaction between side groups of amino acids. A change in pH may, therefore, denature proteins and negatively affect cellular functions.
Explanation:
To get more on how water acts as a universal solvent check out brainly.com/question/7007192
HELP PLZ
Carbon readily makes these bonds with other elements, primarily..?
Explanation:
Carbon has the ability to form long chains of carbon atoms as well as ringed compounds by continuously bonding to itself. This covalent bonds may be single, double, or triple. Carbon forms covalent bonds easily with other elements, especially hydrogen, oxygen, nitrogen, halogens, and a variety of nonmetals.
Which of these affects the motion of an object
A. the position of nearby objects
B. the force acting on the object
C the object's length
D. the age of the object
Answer:
B
Explanation:
If an object is acted upon by another force this will cause it to change the direction and velocity of where it is going.
A gas has a volume of 0.50 L, a pressure of 0.5 atm, and a temperature of 40°C. What will be the new temperature if the gas is expanded to 5.0 L and a pressure of 0.10 atm?
Answer:
4.90
Explanation:
10- 5.0
Is vinegar and rubbing alcohol soluble or insoluble?
Pls help I’ll brainlest and add extra points