The bumper cars crash into each other and stop. Explain why both bumper cars stop after the crash. [4marks]
Answer:
The collision is inelastic
Explanation:
There are two kinds of collision; elastic collision and inelastic collision. In an elastic collision, both momentum and kinetic energy are conserved.
However, in an inelastic collision, kinetic energy is not conserved. So, when the bumper of two cars collide, the cars come to a stop because the collision is inelastic.
Suppose your class invites a person to give a speech. When you test out the sound system in the gym you find there are so many echoes the speaker cannot be understood. What needs to be done to fix this problem?
Answer:
You either need to lower the volume so the sounds intensity is lessened. Or you can pad the walls to absorb the sound rather than defect.
Explanation:
Sound intensity allows it to be heard further, but in an enclosed room it will start returning. Sound will deflect off of hard objects do to its interactions with solids. A softer and foamy material can dampen it.
is a
The wire in a simple circuit
which forms an
unbroken pathway, allowing the
electric charges to flow.
A. switch
B. insulator
C. resistor
D. conductor
Answer:
I believe the answer is D: Conductor.
As an electric current flows through the copper sulfate solution, copper settles on the negative electrode. How will the mass of the copper covering this electrode change if we increase the current by 4 times and halve its flow time?
Answer:
Ține ogaru ca să o lingă pe măta în cur să nu mai facă alt prost ca tine
How many snowmen do you think this sled can destroy? Explain your answer.
Answer:
342,690
Explanation:
I think, given 342,690 snowmen down a giant hill, that sled could destroy every single snowman :)
When 120 V is applied across a 20 m long wire, the magnitude of the current density was found to be 2 * 10 ^ 8 * A / (m ^ 2) . The resistivity of this wire is
Answer:
[tex]\rho=3\times 10^{-8}\ \Omega-m[/tex]
Explanation:
Given that,
Voltage, V = 120 V
The length of the wire, l = 20 m
The current density of the wire, [tex]\dfrac{I}{A}=2\times 10^8\ A/m^2[/tex]
We need to find the resistivity of this wire. We know that,
[tex]R=\rho \dfrac{l}{A}[/tex]
Where
[tex]\rho[/tex] is the resistivity of wire
Also, [tex]R=\dfrac{V}{I}[/tex]
So,
[tex]\dfrac{V}{I}=\rho \dfrac{l}{A}\\\\\rho=\dfrac{V}{l\dfrac{I}{A}}[/tex]
Put all the values,
[tex]\rho=\dfrac{120}{20\times 2\times 10^8}\\\\=3\times 10^{-8}\ \Omega-m[/tex]
So, the resistivity of this wire is equal to [tex]3\times 10^{-8}\ \Omega-m[/tex].
can someone help? i don’t need 14
Answer:
Explanation:
11.) d
12.) f
13.) c
15.) i
pls give me brainliest
A solid metal ball with a mass of 10.0 kg is placed on a smooth floor what force would be needed to accelerate the ball at a rate of 2.0 m/s2.
40 N
20 N
5 N
0.2 N
c) Explain the following.
Keftles, cooking pans and iron boxes have polished surfaces
Answer:
Polished surfaces reduce heat loss
What is the difference between the spectrum of an incandescent solid and the spectrum of an incandescent gas?
Incandescent solids emit bright-line spectra; incandescent gases emit continuous spectra.
Incandescent solids emit one wavelength; incandescent gases emit several wavelengths.
Incandescent solids emit continuous spectra; incandescent gases emit bright-line spectra.
Incandescent solids emit scattered spectra; incandescent gases emit continuous spectra.
Answer:
ncandescent solids emit continuous spectra; incandescent gases emit bright-line spectra.
Explanation:
Materials when heated emit a continuous spectrum with all wavelengths.
Hot gas gases emit a spectrum that depends on the transitions between atomic states, therefore it is a discrete spectrum.
When reviewing the answers, the correct one is:
ncandescent solids emit continuous spectra; incandescent gases emit bright-line spectra.
can someone please help me please I will mark brainlist and give you 5 stars pleasee
Answer:
If I did my calculations correctly then the answer is 11 but I may be weong
Answer:
it's 11
gkccgkxcgikvxxkg
POSSIBLE 1. Which of the following are examples of a physical reactions: (1) ice melting, (2) pencil breaking, (3) iron rusting, (4) wood burning? a. 1.4 b. 3,4 c. 2.3 d. 1,2
Answer:
D) 1 & 2
Explanation:
Ice melting can be refrozen and although the pencil breaks, it doesn't change the chemical formula of the pencil
All electric charge is based on the what in Atoms
Answer:
c. Protons and electrons
Explanation:
electrons carry out negative charge
protons carry out positive charges
the spring constant for each of these springs 100 000 N m-1. Calculate the distance that each of these rear springs is compressed by this vehicle as shown in the diagram above
Answer:
sorry
Explanation:
What is a disadvantage of using nuclear power to produce electricity?
Answer:
The further implementations of nuclear power are limited because although nuclear energy does not produce CO2 the way fossil fuels do, there is still a toxic byproduct produced from uranium-fueled nuclear cycles: radioactive fission waste.
Explanation:
Answer:
Disadvantages of Nuclear Power
The further implementations of nuclear power are limited because although nuclear energy does not produce CO2 the way fossil fuels do, there is still a toxic byproduct produced from uranium-fueled nuclear cycles: radioactive fission waste.
Explanation:
what does thermal energy do
Answer:
Thermal energy can be transferred to one object to another in the form of heat. It causes molecules and atoms to collide with each other because of the rising of heat.
Explanation: Well thermal energy is a example of kinetic energy. It is heated by motion. It is heat that can be measured
What is the intensity of sound produced by an elephant's call if it has a power of 0.45 W and you are standing 32.5 m away from the lumbering beast
Answer:
I = 1.36 x 10⁻⁴ W/m²
Explanation:
The intensity of the sound produced by the Elephant can be calculated by using the following formula:
[tex]I = \frac{P}{A} \\\\[/tex]
where,
I = Intensity of sound = ?
P = power of sound = 0.45 W
A = area = πr² = π(32.5 m)² = 3318.3 m²
Therefore,
[tex]I = \frac{0.45\ W}{3318.3\ m^2} \\\\[/tex]
I = 1.36 x 10⁻⁴ W/m²
Use the drop-down menu to answer the question.
According to "Take a Closer Look", what type of lens is used to correct nearsightedness?
Answer: A.) concave lens
Explanation: i hope this helps shawtay :)
In general, a concave lens (also known as a diverging lens) is used to correct nearsightedness, as stated in "Take a Closer Look." Option C is correct.
What is the lens?A lens is an optical component that is used to refract (bend) and focus light. It is typically made of a transparent material, such as glass or plastic, and has a specific shape that allows it to alter the path of light as it passes through.
Here,
In general, a concave lens (also known as a diverging lens) is used to correct nearsightedness, as stated in "Take a Closer Look."
A concave lens is thinnest at the center and thicker at the edges, which causes light rays passing through the lens to diverge or spread out. By placing a concave lens in front of a nearsighted eye, the lens causes incoming light rays to diverge more before they reach the eye's lens, which then focuses them properly on the retina, resulting in clearer vision.
Learn more about the lens here:
https://brainly.com/question/2919483
#SPJ6
Which kind of wave is generated by a plucked guitar string as the molecules
of air around it begin to vibrate?
O A. Transverse
O B. Surface
O C. Electromagnetic
O D. Longitudinal
PLEASE HELP
Answer:
longitudinal
Explanation:
Heat is the measurement of energy from all the particles that are in a substance.
Please select the best answer from the choices provided : T/F
Explanation:
the correct answer is (true) if am not mistaking incase am wrong sorry
An area experiences thunderstorms with high winds and a drop in temperature. Which weather event most likely occurred? A. A stationary front moved through the area. B. A fast-moving warm front moved trough the area. C a fast-moving cold front moved through the area. D. A slow-moving warm front followed a fast-moving cold front through the area
Answer:
C a fast-moving cold front moved through the area.
Explanation:
This is because, since there is a there is a thunderstorm and high winds in the area, this can only be caused by a fast moving front. Also there is a temperature drop, this can only be caused by the fast moving cold front since a cold front has a low temperature.
Thus, for the area to experience thunderstorms with high winds and a drop in temperature, a fast-moving cold front moved through the area.
9. Bryce drove his car 10 km from his house to Belle Plaine. It took him 8 minutes. He got stopped at a long
traffic light on the return home and so he took 2 minutes longer on the return trip. What was Bryce's average
speed in km per minute? (3 pt)
Answer:
2 km/minuteExplanation:
Here, we are asked to calculate the average speed in km/minute.
As we know that,
Average speed = Total distance ÷ Total time takenHere,
→ Total distance = 10 km + 10 km
Because, he first drove 10 km from his house to Belle Plaine and then he again came back to his house.→ Total distance = 20 km
→ Total time = 8 minutes + 2 minutes
→ Total time = 10 minutes
Substitute the values in the formula of average speed,
→ Average speed = Total distance ÷ Total time taken
→ Average speed = 20km ÷ 10 minutes
→ Average speed = 2 km per minuteAccording to the graph, how many atoms would remain after two half-lives?
20 atoms
80 atoms
40 atoms
50 atoms
Answer:
Let No be initial no of atoms
N = N0 / 2 after 1 half-life
N = N0 / 4 after 2 half-lives
So after 2 half-lives 20 of the 80 atoms remain
true or false? rocks have organic materials and fossil remains in them
Answer:
trueeeee
Explanation:
Madeline is measuring wavelengths. Look at her notes above. What mistakes has she made in her measurement? What should she do differently to obtain the correct wavelength?
A wire lying along a y axis form y=0 to y=0.25 m carries a current of 2.0 mA in the negative direction of the axis. the wire fully lies in a magnetic field given by (0.3y)i + (0.4y)j Tesla. what is The magnetic force on the wire
A: (0.15i+0.2j) N
B: (0.0015i+0.002j) N
C: (-6.25E-5 k) N
D:(6.25E-5 k) N
E: None of the above
Answer:
E: None of the above
Explanation:
Since the force on the wire F = ∫idL × B where i = current in wire = 2.0 mA = 2.0 × 10⁻³ A, dL = vector length of wire = dyj and we integrate from y₁ = 0 m and y₂ = 0.25 m, and B = magnetic field = (0.3y)i + (0.4y)j
So, F = ∫idL × B
and we integrate from y₁ = 0 m and y₂ = 0.25 m
F = 2.0 × 10⁻³ A∫₀⁰°²⁵[dyj m × (0.3y)i + (0.4y)j]
F = 2.0 × 10⁻³ A∫₀⁰°²⁵[dyj m × (0.3y)i + dyj m × (0.4y)j]
F = 2.0 × 10⁻³ A∫₀⁰°²⁵[(0.3y) × dy(j × i) + 0.25 × (0.4y)(j × j)]
F = 2.0 × 10⁻³ A∫₀⁰°²°⁵[(0.3ydy(-k) + 0.1y)(0)]
F = 2.0 × 10⁻³ A∫₀⁰°²⁵(-0.3ydy)k
F = 2.0 × 10⁻³ A[-0.3y²/2]₀⁰°²⁵k
F = -2.0 × 10⁻³ A[0.3(0.25)²/2 - 0.3(0)²/2]k
F = -2.0 × 10⁻³ A[0.3(0.0625)/2 - 0]k
F = -2.0 × 10⁻³ A[0.3(0.0625)/2]k
F = -1 × 10⁻³[0.01875]k N
F = -[0.01875 × 10⁻³]k N
F = -[1.875 × 10⁻⁵]k N
Since the answer is not contained in the options, the answer is E.
The diagram below shows a periodic wave. Which two points on the wave are 180 degrees out of phase?
Please explain as well, thanks so much
Answer:
A and C are 180 deg out of phase (opposite points on a 360 deg wave)
The two points on the periodic wave which are 180 degrees out of phase are point A and Point C.
When two points of wave are out of phase?The two points of a wave is said to be out of phase when they show up or down motion at different times.
If a point on the wave, say (X) is reached to the maximum or minimum point before the other point. Then these two points are said to be out of phase.
Also, when the points are 180 degree apart from each other. Which means if a point is in the crest of the wave and other is on the through.
The diagram below shows a periodic wave. In this diagram,
A and I are the end points of the periodic wave.B,C,D,E,F and G are the other points on the periodic wave.Here, the point A and C are opposite point of each other. So they are 180 degrees out of phase.Hence, the two points on the periodic wave which are 180 degrees out of phase are point A and Point C.
Learn more about the periodic wave here;
https://brainly.com/question/16749356
how can a sound of a different note be produced in a guitar without changing the length of wire?
Answer:
how tightly strung the wire is
-- Make the string tighter or looser.
-- Keep the same length, but make the string thicker or thinner.
-- Touch the string at a point exactly 1/2, 1/3, 1/4, or 1/5 of its length from one end.
What element is formed in the following nuclear reaction
Answer:
Oxygen or more precisely, the O-15 isotope.
calculate the heat required to change 2.0kg of ice at 0°C to water at 0°C
Answer:
160000 calories or 669440 Joules
Explanation:
Using the formula as follows;
Q = L × m
Where;
Q = amount of heat (J)
L = specific latent heat
m = mass (g)
* Latent heat (L) required for melting of ice is 80 calories/grams.
* Mass of ice in grams = 2kg × 1000 = 2000g.
Hence, Q = 80 × 2000
= 160000 Calories
1 calorie = 4.184J
160000 calorie = 160000 × 4.184
= 669440J