Answer:
Covalent bonds
Explanation:
Covalent bonding
Covalent bond refers to mutual sharing of electrons between two atoms
____ occurs when the vapor pressure of a liquid is equal to the external atmospheric pressure.
Answer:
c
Explanation:
boiling
1.
Events in which molten rock spews out of
the mantle as ash, lava, and gases
Answer:
Landslides, Volcanoes, Earthquakes, and Floods. A opening in the Earth's surface through which melted rock, gases, and ash escape. Events in which molten rock spews out from the mantle to the surface of Earth as ash, lava, and gases
Explanation:
are the bonds of OCl2 polar?
Answer: OCl2 is polar because the two O-Cl bond dipoles don't cancel each other.
3C6H206
How many atoms are there? Help ASAP!
Answer:
the answer to this is 74 :)
Explain how the iron pipes change into rust?
How many moles of calcium oxide are formed when 3 moles of calcium react with oxygen?
Answer:
3 moles of calcium oxide are formed
Explanation:
Based on the reaction of Calcium Ca, with oxygen, O₂, to produce calcium oxide, CaO is:
2Ca + O₂ → 2CaO
where 2 moles of calcium produce 2 moles of Calcium oxide.
That means, if 3 moles of Ca react in presence of oxygen:
3 moles of calcium oxide are formed
HELP WILL GIVE BRAINLIEST NO WEIRD ANSWERS PLSS
Answer:
Solid
Explanation:
The reason is because the liquid aspirin has a plastic cover with a liquid inside and it doesn't take long for out stomach acid to dissolve the cover unlike the Solid aspirin where is slowly dissolves.
which do you think will warm up the plate more quickly?
A. Direct sunlight
B.Indirect sunlight
Answer: B
your welcome Bsbssnsnsmsllqql
How many kilojoules of heat must be transferred to a 480-g aluminum pizza pan to raise its temperature from 22°C to 234°C? The specific heat of aluminum in this temperature range is 0.96 J/g.°С. Show your work.
Answer:
97.7 kJ
Explanation:
We'll use the formula for specifc heat: Q=mcΔT
Q= heat/energy (Joules), m= mass (grams), c= specific heat (different for each substance and is usually given)
ΔT= final temperature - initial temperature
Let's check our given units and see if they're the correct, here they all are. Let's plug in what we know.
Q=mcΔT
Q=(480)(0.96)(234 - 22)
Q=(480)(0.96)(212)
Q= 97,690 J
Before we submit an answer, let's check out units. We have our answer in Joules, but we want it it kilojoules, so we'll convert it knowing that:
1000 Joules = 1 kilojoule
97,690J x [tex]\frac{1 kJ}{1000J}[/tex] = 97.7kJ
Explanation:
the answer and the working out is shown above.
The pH of a solution with a Hydronium (H30+) ion concentration of 0.001M is
Answer:
The pH of a solution with a Hydronium (H₃O⁺) ion concentration of 0.001 M is 3.
Explanation:
pH, short for Hydrogen Potential, is a measure used to establish the level of acidity or alkalinity of a solution.
pH indicates the amount of hydrogen ions present in a solution or substance. Mathematically the pH is the negative logarithm of the molar concentration of hydrogen ions or protons (H⁺) or hydronium ions (H₃O⁺).
pH= - log [H⁺]= - log [H₃O⁺]
The pH scale goes from 0 to 14. Values less than 7 indicate the range of acidity and those greater than 7 indicate alkalinity or basicity. The value 7 is considered neutral.
In this case, [H₃O⁺]= 0.001 M.
Replacing in the definition of pH:
pH= - log (0.001 M)
Solving:
pH= 3
The pH of a solution with a Hydronium (H₃O⁺) ion concentration of 0.001 M is 3.
It takes a season to create a hybrid, and about 15 years to create a_____.
•It takes a season to create a hybrid, and about 15 years to create a Plant variety.
may this helps you
hope it's correct
bye
An aqueous solution has a hydroxide-ion concentration of 1.0x10^-3M. What is the pH of the solution?
a.11
b.3
c.-3
d.7
Put these events in order.
= Your phone contacts a base station in a cell.
= Once connected, a duplex system allows you to talk to the other person at the same time.
= You dial a number on your cell phone.
The MTSO then connects you to the other device.
= A base station contacts the Mobile Telephone Switching Office (MTSO).
Answer:
You dial a number on your phone
Your phone contacts a base station
The base station contacts the MTSO
The MTSO connects you to the other device
You talk to the person on the other device.
A type of symbiosis where one organism benefits, while the other organism is neutral.
Mutualism
Parasitism
Commensalism
Predation
Answer:
Commensalism is a symbiotic relationship in which one species benefits while the other species is not affected. One species typically uses the other for a purpose other than food.
thermal conductors what
What is the difference between an imprint and an impression?
Answer:
As nouns the difference between impression and imprint
is that impression is the indentation or depression made by the pressure of one object on or into another while imprint is an impression; the mark left behind by printing something.
The term imprint is defined as to mark by or as if by pressure and the term impression is defined as the effect produced by impressing.
What is the difference between an imprint and an impression?The difference between an imprint and an impression is that the imprint is the mark left behind when anything is printed, whereas the impression is the indentation or depression caused by the pressure of one object against or into another.
While a shoe won't make an impression in loose sand, it will on a hard surface like concrete or linoleum. These imprints or impressions might be contrasted with the shoe of a suspect or the tire of a car to see if they belong to the same object.
Thus, The term imprint is defined as to mark by or as if by pressure and the term impression is defined as the effect produced by impressing.
To learn more about the imprint and the impression, follow the link;
https://brainly.com/question/20410964
#SPJ2
Why is there an attraction between the two ions in this chemical bond?
Answer:
A metallic bond is a force of attraction between charged metal ions and the electrons that are in the delocalized bond, which covers the assembly of ions. A covalent bond is the force of attraction between the nuclei of atoms, and the electrons shared between them.
Explanation:
A chemical bond is a lasting attraction between atoms, ions or molecules that enables the formation of chemical compounds. The bond can be generated by electrostatic attraction between charged ions (for example, ionic bonds) or by electron sharing (for example, covalent bonds).
I hope this helps you :)
Students in a science class prepared flash cards so that they could quiz one another about the
arrangement of the periodic table. One of the flash cards contained information about two
elements, Element L and Element M.
Qualities:
-Atom of element M has two more balances electrons than element atoms of L
- atoms of element L are more reactive than atoms of element M
-both elements are metals
The students had to use the information on n the flash cards to determine possible positions of the two elements on a blank periodic table. Which periodic table has the elements placed in the locations that match the information on the flash cards?
Answer:
the periodic table is G.
The periodic table has the elements placed in the locations that match the information on the flash cards is F.
What is periodic table?The term "periodic table" refers to an arrangement of all known elements in order of increasing atomic number and recurrent chemical attributes. The periodic table is organized into 118 elements.
The term "periodic table" can also refer to a table that lists all known chemical elements in rows and columns.
In the F table, L is found in alkaline earth metals while M is found in transition metals. M has more valence electrons than L, while L is more reactive than M.
Thus, the periodic table has the elements placed in the locations that match the information on the flash cards is F.
To learn more about periodic table, refer to the link below:
https://brainly.com/question/11155928
#SPJ5
One of the main components of an airbag is the gas that fills it. As part of the design process, you need to determine the exact amount of nitrogen that should be produced. Calculate the number of moles of nitrogen required to fill the airbag. Show your work. Assume that the nitrogen produced by the chemical reaction is at a temperature of 495°C and that nitrogen gas behaves like an ideal gas. Use this fact sheet to review the ideal gas law.
The number of moles of the gas is 0.016 moles
What is the airbag reaction?We know that in the airbag, nitrogen gas is obtained by the decomposition of sodium azide as follows; 2NaN3 -----> 2Na + 3N2
Since it is under ideal conditions;
P = 1 atm
V = 1 L
T = 495°C or 768 K
n = ?
R = 0.082 atm LK-1mol-1
From;
PV= nRT
n = PV/RT
n = 1 atm * 1 L/ 0.082 atm LK-1mol-1 * 768 K
n = 0.016 moles
Learn more about ideal gas law;https://brainly.com/question/13821925
#SPJ1
What is the molarity of a solution with 2 moles of HCl in 2000 mL?
Answer:
"1 M" will be the right solution.
Explanation:
The given values are:
Number of moles,
= 2 moles
Volume of solution,
= 2000 mL
or,
= 2 L
Now,
The molarity of the solution will be:
= [tex]\frac{Moles}{Liters}[/tex]
On substituting the values, we get
= [tex]\frac{2}{2}[/tex]
= [tex]1 \ M[/tex]
In P plants the gene for the color of the sea has two alleys in the punnets square show me love the dominant alley Y represents yellow and recessive alley Y represents green based on the punnets square what percentage of offspring would be expected to have a green seeds
Answer:
25%.
Explanation:
In the F1 generation, the yellow colour is dominant so 75% of the seeds are yellow colour while on the other hand, 25% seeds are green in colour due to recessive allele. In the F1 generation, the ratio of dominant to recessive allele is 3:1. So on the basis of this 3:1 ratio we can say that there is 75% of yellow colour seeds and 25% of green colour seeds in the population of F1 generation.
Convert 15.75 grams of Magnesium to atoms.
Answer: [tex]3.903\times 10^{23}[/tex]
Explanation:
Given
Mass of magnesium is [tex]m=15.75\ gm[/tex]
The molar mass of magnesium [tex]M=24.3\ g/mol[/tex]
No of moles in 15.75 g of magnesium is
[tex]\Rightarrow n=\dfrac{15.75}{24.3}\\\\\Rightarrow n=0.648\ \text{moles}[/tex]
1 mole contains [tex]6.022\times 10^{23}[/tex] atoms
So, 0.648 moles contain [tex]0.648\times 6.022\times 10^{23}[/tex]
[tex]=3.903\times 10^{23}\ \text{atoms}[/tex]
A scientist wants to test the effectiveness of a medicine in treating
headaches. He puts the medicine into cookies and then tells his subjects to
lie down and have a cookie when they have a headache. He asks them to give
him feedback about how well these relaxation techniques work to cure their
headaches. What rule of ethics does this experiment break?
O A. The subjects are not informed that they are taking a medicine.
B. It is likely to harm his subjects.
C. The scientist is taking the work of others by reviewing the
subjects' feedback.
D. It is testing more than one variable at the same time.
How many grams of sucrose will I add to the water (0.100 L) in order to make the 3 molal solution.
Answer:
mass = 102.69 g of sucrose
Explanation:
First, you need to use the correct expression of molality (m) which is the following:
m = moles / kg solvent (1)
According to the exercise, we need to get the grams, in other words, the mass of the sucrose. To get the mass, we need the moles and molecular weight of sucrose and use the following expression:
moles = mass / MM (2)
Now, if we replace (2) in (1) we have:
m = mass / MM * kg solvent (3)
From here, we solve for the mass and then:
mass = m * MM * kg solvent (4)
Now, then density of water is 1 kg/L, so, the volume of the water will be the same as it's mass, and the molality is 3 m. The molecular weight of the sucrose is (according to several sources) 342.3 g/mol. Replacing all the data in (4) we have:
mass = 3 mol/kg * 0.1 kg * 342.3 g/mol
mass = 102.69 g of sucroseHope this helps
The extraction of zinc from zinc blend and explain how the zinc oxide be reduced using Carbon monoxide Electrolysis
Answer:
Zinc blend is Zinc sulphide, ZnS.
ZnS is roasted in air producing ZnO and Sulphur dioxide.
ZnO is reduced to Zn by CO.
Further purification is done by electrolysis.
Describe what is wrong with this sentence:
"When you kick a soccer ball, you create new
kinetic energy!"
Answer:
You transfer kinetic energy from you foot to the ball.
Explanation:
Energy cannot be created or destroyed.
Answer:
hi..,......
.....hsjnsgzgkskshbs
El carbono de calcio se descompone por la acción del calor en óxido de calcio y dióxido de carbono. a). Escribe la ecuación química ajustada. b). Calcula qué cantidad de dióxido de carbona se forma si reaccionan 150g de carbonato de calcio.
Respuesta:
1.50 moles
Explicación:
Paso 1: Escribir la ecuación química ajustada para la descomposición del carbonato de calcio
CaCO₃ ⇒ CaO + CO₂
Paso 2: Calcular los moles correspondientes a 150 g de CaCO₃
La masa molar de CaCO₃ es 100.09 g/mol.
150 g × 1 mol/100.09 g = 1.50 mol
Paso 3: Calcular los moles de CO₂ producidos a partir de 1.50 moles de CaCO₃
La relación molar de CaCO₃ a CO₂ es 1:1.
1.50 mol CaCO₃ × 1 mol CO₂/1 mol CaCO₃ = 1.50 mol CO₂
If I have 0.044 mol Ammonia (NH3) molecules, how many atoms of hydrogen do I have?
Answer:
1 Answer. Before you use log you have to multiply the answer of 8.66 mol by 6.02⋅1023 by 3 because the answer of 8.66 mol by 6.02⋅1023 gives you the number of ammonia molecules and in each molecules there are 3 hydrogen atoms present.
Explanation:
Calculate the percentage composition of SrBr2
Answer:
64.6% of Br and 35.4% of Sr
Explanation:
The percentage composition is obtained defining the percentage in mass of each atom in a molecule.
To solve this question we must find the mass of each atom in 1 mole:
Molar mass Br: 79.904g/mol
Molar mass Sr: 87.62g/mol
The molar mass of SrBr2 is:
79.904g/mol*2 + 87.62g/mol =
159.808g/mol + 87.62g/mol =
247.428g/mol
The percentage of Br is:
79.904g/mol*2 = 159.808g/mol / 247.428g/mol * 100
= 64.6% of Br
And percentage of Sr is:
87.62g/mol / 247.428g/mol * 100
= 35.4% of Sr
Speed is the rate of change of position expressed as _____ traveled per unit of time. A. direction B. meter C. displacement D. distance... Help!!!
Answer:
Distance
Explanation: