What should you do before inserting a wire into an outlet box?
A. Place a bushing inline.
B. Remove a foot of the outer covering.
C. Clean the terminals.
D. Strip at least three inches and re-twist the strands to retighten.

Answers

Answer 1

The first thing that you should do before inserting a wire into an outlet box is to remove a foot of the outer covering.

What is an outlet box?

The outlet box is sometimes called the junction box. It is from this point that  power is distributed to appliances in the home. Its main function is to protect against short circuits.

The first thing that you should do before inserting a wire into an outlet box is to remove a foot of the outer covering.

Learn more about the outlet box:https://brainly.com/question/13958361?

#SPJ1


Related Questions

A multi-dimensional being reaches down to Earth and pulls you out of the universe. You are then thrown back into the universe at a place and time of the being's choosing, and you are permitted to leave only after you have identified your surroundings. This process is repeated several times. Through a scientifically unexplainable miracle, you are able to survive in every one of the places that you find yourself. In each scenario below, identify your surroundings (and potentially your cosmic era) from among the choices given. You find yourself in a place that is unimaginably hot and dense. A rapidly changing gravitational field randomly warps space and time. Gripped by these huge fluctuations, you notice that there is but a single, unified force governing the universe.

Required:
Where are you?

Answers

You are in an early universe.

In the study of the evolution of the universe, it has been determined before Plank time (before the big bang and right after it), the early universe had the following characteristics:

There was only one single force acting over all that existed.The early universe was very hot and dense because all matter had contracted before the big bang.Space and time were wrapped.

These characteristics match the ones described, based on this, we can conclude you are in an early universe.

Learn more about universe in: https://brainly.com/question/9724831

Energy stores in food would be considered what

Answers

Answer:

Energy stored in food is consider as carbohydrate,protein,fats,etc.

write down 4 situations where magnets are used in our daily life​

Answers

Answer:

Magnets are used to make a tight seal on the doors to refrigerators and freezers

They power speakers in stereos, earphones, and televisions

Magnets are used to store data in computer's

magnets are used in the compass


A mass is pulled to the right while on a table.
A. Label the forces.
5 kg
B. Calculate the
object's weight.

Answers

Answer:

weight in 49N

I hope it's correct

How charged objects can affect other objects without touching them. ?

Answers

By gravity as well as electrostatic and magnetic attraction and repulsion
Example forces being exerted by one object on another without them being in contact with each other

A plane flies from New York to LA at a constant speed of 800 km an hour how long will it take the plane to fly to 4,200 kilometers

Answers

Answer:

3.5 hours

Explanation:

a new planet is discovered that has twice the earth’s mass and twice the earth’s radius. on the surface of this new planet, a person who weighs 500 n on earth would experience a gravitational force of

Answers

Answer: 250n

Explanation:

The formula for gravitational force is: F = (gMm)/r^2

There are two factors at play here:

1) The mass of the planet 'M'

2) The radius 'r'

We can ignore the small M and the g, they are constants that do not alter the outcome of this question.

You can see that both M and r are double that of earth. So lets say earth has M=1 and r=1. Then, new planet would have M=2 and r=2. Let's sub these two sets into the equation:

Earth. F =  M/r^2 = 1/1

New planet. F = M/r^2 = 2/4 = 1/2

So you can see that the force on the new planet is half of that felt on Earth.

The question tells us that the force on earth is 500n for this person, so then on the new planet it would be half! So, 250n!

pls help it's due today​

Answers

Answer:

Breh seriously. Ugh fine.

1.B

2.D

3.C

4.C

5.D,A and B

6.A,C and D

Which of the following is true for gravitational force?

Group of answer choices
Decreases with decrease in distance

Increases with increase in distance

Decreases with increase in mass

Increases with increase in mass

Answers

Answer:

The gravitational force b) Increases with increase in mass.

Explanation:

The gravitational force between two objects is given by

F=G\frac{m_1 m_2}{r^2}F=Gr2m1m2

where

G is the gravitational constant

m1, m2 are the masses of the two objects

r is the separation between the objects

From the equation, we notice that:

- The force is proportional to the masses, m1 and m2: so, if the masses increase, the force will increase, and if the masses decrease, the force will decrease

- The force is inversely proportional to the distance between the masses, r: so, if the distance increases,  the force will decreases, and if the distance decreases , the force will increases

Therefore, the correct options is only:

Increases with increase in mass

Answer: The answer is b increases in increase of mass because the heavier the object is the more gravitional pull it will have.

Explanation: Which of the following is true for gravitational force?

Group of answer choices

Decreases with decrease in distance

Increases with increase in distance

Decreases with increase in mass

Increases with increase in mass

I'll give brainlest
*the first pic is for Alberto and second for the mouse*
Question 1
Alberto created a graph to illustrate his trip. Answer the questions below.
A. How does Alberto's motion change at point B?
B. What is Alberto's speed from point C to point D?
C. What happens at point D? (1 point)

Question 2
Answer the question below about Smokey The Mouse.
A. Use inertia to explain how a balanced force will affect his motion. (Newton's 1st Law)
B. What are two ways Smoky can increase his speed? (Use Newton's 2nd Law to help you)
C. What is an example of an action and reaction at work in this picture? (Use Newton's 3rd Law to help you)

Answers

Answer:

The mouse exerts a force on the ground and the ground exerts an equal and opposite reaction force on the mouse.

At point B, Alberto's distance covered increases with time, equal distance is covered in equal time interval. The speed increases uniformly. At the point C to D, the distance covered with time remains the same. At the point D, equal distance is no longer covered in equal time intervals.

According to the law of inertia, an object will remain at rest or in a state of uniform motion unless it is acted upon by an unbalanced force. This means that smokey mouse will continue moving uniformly unless a force acts on it.

From Newton's second law; F = ma and a = F/m. F = force , m= mass, a = acceleration. This implies that smokey mouse can increase its speed by;

Increasing the force acting on the mouse

Decreasing the mass of the mouse

Action and reaction is encountered as the mouse is walking. The mouse exerts a force on the ground and the ground exerts an equal and opposite reaction force on the mouse.

Explanation:

What is the equivalent resistance of a 12-ohm resistor wired in parallel with a 4-ohm resistor?
А
0.06 ohms
B
0.33 ohms
С
3.0 ohms
D
16.0 ohms

Answers

[tex]R=\frac{R1.R2}{R1+R2} = \frac{12.4}{12+4}=\frac{48}{16}=3<ohms>[/tex]

The answer is : C. 3.0 ohms

Ok done. Thank to me :>

how does the function of the parts of the system contribute to its function as a whole


plsss help i need it rn i’ll give brainliest

Answers

Answer and explanation: Just as the organs in an organ system work together to accomplish their task, so the different organ systems also cooperate to keep the body running. For example, the respiratory system and the circulatory system work closely together to deliver oxygen to cells and to get rid of the carbon dioxide the cells produce.

Solve the science problem

Answers

Answer:

1.hydrogen

2.helium

3. lithium

4.beryllium

5.boron

6.carbon

7.nitrogen

8.oxygen

9.fluorine

10.neon

Help please!

3. A 75 kg linebacker moving at 6 m/s is running towards an 80 kg tackle moving 4 m/s. If they collide and stick together, how fast will they be moving after the collision?

5. A 6 kg bowling ball and a 4 kg bowling ball are rolled toward each other. The 6 kg ball is initially moving at 5.1 m/s and the 4 kg ball is moving in the opposite direction at 1.3 m/s. If the 6 kg ball slows to 1.5 m/s, what is the final speed of the 4 kg ball?

Answers

3. The sum of the players' momenta is equal to the momentum of the players when they're stuck together:

(75 kg) (6 m/s) + (80 kg) (-4 m/s) = (75 kg + 80 kg) v

where v is the velocity of the combined players. Solve for v :

450 kg•m/s - 320 kg•m/s = (155 kg) v

v = (130 kg•m/s) / (155 kg)

v ≈ 0.84 m/s

4. The total momentum of the bowling balls prior to collision is conserved and is the same after their collision, so that

(6 kg) (5.1 m/s) + (4 kg) (-1.3 m/s) = (6 kg) (1.5 m/s) + (4 kg) v

where v is the new velocity of the 4-kg ball. Solve for v :

30.6 kg•m/s - 5.2 kg•m/s = 9 kg•m/s + (4 kg) v

v = (16.4 kg•m/s) / (4 kg)

v = 4.1 m/s

What process primes a molecule to change in a way that increases its activity, produces motion, or does work

Answers

Answer:

cellular respiration.

explanation: cellular respiration, the process by which organisms combine oxygen with foodstuff molecules, diverting the chemical energy in these substances into life-sustaining activities and discarding, as waste products, carbon dioxide and water.

Imagine that you are going to visit your friend. Before you get there, you decide to stop at the variety store. If you walk 200 m (N) from your home to the store, and then travel 600 m [S] to your friend's house, what is your total displacement?​

Answers

Answer:

400m

Explanation:

Brainliest? :))

Let your initial displacement from your home to the store be

Dd

>

1 and your displacement from the store to your friend’s house

be Dd

>

2.

Given: Dd

>

1 = 200 m [N]; Dd

>

2 = 600 m [S]

Required: Dd

>

T

Analysis: Dd

>

T 5 Dd

>

1 1 Dd

>

2

Solution: Figure 6 shows the given vectors, with the tip of Dd

>

1

joined to the tail of Dd

>

2. The resultant vector Dd

>

T is drawn in red,

from the tail of Dd

>

1 to the tip of Dd

>

2. The direction of Dd

>

T is [S].

Dd

>

T measures 4 cm in length in Figure 6, so using the scale of

1 cm : 100 m, the actual magnitude of Dd

>

T is 400 m.

Statement: Relative to your starting point at your home, your

total displacement is 400 m [S].

Calculate the Work done if the force is 2000 Newtons
and the distance is 5 km.

Answers

Answer:

10 million joules or 10,000 KJ

Explanation:

Work= Force x Displacement

convert 5km into meters -5km=5000m

W= 2000N x 5000m

w=10,000,000 Joules

or 10,000KJ

If astronomers discovered a new planet and found its period of rotation around the Sun to be 105 years, how long would its semi-major axis length be as it orbited the Sun in AU?

Answers

From Kepler's third law, its semi-major axis length will be 22.2 AU approximately as it orbited the Sun in AU. The closest option is option C

Given that an astronomers discovered a new planet and found its period of rotation around the Sun to be 105 years.

According to Kepler's third law,

[tex]T^{2} \alpha r^{3}[/tex]

Where

T = Period ( in earth years) = time to complete one orbit

r = Length of the semi major axis in Astronomical unit.

[tex]T^{2}[/tex] = [tex]\frac{4\pi ^{2} }{GM} * r^{3}[/tex]

convert years to seconds

105 x 365 day x 24 hours x 3600 s

T = 3311280000 seconds

Mass of the sun M = 1.989 × 10^30 kg

G = 6.67 x [tex]10^{-11}[/tex]N m^2/kg^2

Substitute all the parameters into the formula

[tex]T^{2}[/tex] = 1.096 x [tex]10^{19}[/tex] = [tex]\frac{4\pi ^{2} }{6.67 * 10^{-11} * 1.989 * 10^{30} } * r^{3}[/tex]

1.096 x [tex]10^{19}[/tex] = 2.976 x [tex]10^{-19}[/tex] [tex]r^{3}[/tex]

[tex]r^{3}[/tex] = 1.096 x [tex]10^{19}[/tex] / 2.976 x [tex]10^{-19}[/tex]

[tex]r^{3}[/tex] = 3.68 x [tex]10^{37}[/tex]

r = [tex]\sqrt[3]{3.68 * 10^{37} }[/tex]

r = 3.33 x [tex]10^{12}[/tex] m

1 AU = 1.5 x [tex]10^{11}[/tex] m

r = 3.33 x [tex]10^{12}[/tex] / 1.5 x [tex]10^{11}[/tex]

r = 22.18 AU

Therefore, its semi-major axis length will be 22.2 AU approximately as it orbited the Sun in AU. The closest option is option C

Learn more about Kepler's laws here: https://brainly.com/question/4639131

Answer:

C. 22.3 AU

Explanation:

Not only is the above an unnecessarily complicated answer, it's not even fully correct, and definitely not what they want you to do.

T^2 = s^3, where T = orbital period and s = semi-major axis length.

Substitute T and you get 105^2 = s^3. Solve for s.

11025 = s^3

3√11025 = s

22.25663649 = s

Therefore, the answer is C. 22.3 AU

Explain how energy changes in the spring toy below when it goes downstairs.

Answers

Given what we know, we can confirm that the spring toy uses the transfer of potential gravitational energy into kinetic energy of motion in order to fall down the stairs.

How does the toy do this?The toy stores potential energy. It does this using gravity. Once it begins to fall, it uses the momentum from each fall to continue to do so. With each fall, its stored potential energy is transferred to kinetic energy.

Therefore, we can confirm that the spring toy uses its position at the top of each stair as a source of potential energy, which using the momentum from the last fall, it transfers into the kinetic energy of motion as it falls, all through the help of gravity.

To learn more about energy visit:

https://brainly.com/question/999862?referrer=searchResults

define Newton's law of motion​

Answers

By definition, Newton's First Law, also called the Law of inertia, indicates that "Every body perseveres in its state of rest or of uniform rectilinear motion unless it is forced to change its state by forces impressed on it."

This means that for a body to come out of its state of rest or of uniform rectilinear motion, it is necessary for a force to act on it.

Definition of inertia

So, in other words, all bodies are opposed to changing their state of rest or motion and this opposition is called inertia.

Body in equilibrium

In this way, a body is in equilibrium when the resultant of the forces acting on it is zero. That is, it is not possible for a body to change its initial state (be it rest or motion) unless one or more forces intervene.

Learn more about Newton's Laws:

https://brainly.com/question/13230056?referrer=searchResults

A young diver is practicing his skills before an important team competition. Use the diagram below in order to analyze the energies of the diver and complete the statements below.

Where m = mass (kg), g = 9.8 m/s2, v = velocity (m/s), h = height (m), KE = kinetic energy (J), and GPE = gravitational potential energy (J).
Use the equations above to answer the following questions.

A diver with a mass of 90 kg is at a height of 10 m, and he has not jumped off of the board yet (v = 0 m/s). When the diver reaches a height of 5 m (Point C), his gravitational potential energy is

A. 1350 J

B. 8820 J

C. 4410 J

D. 0 J

and his velocity is

E. 4.5 m/s

F. 0 m/s

G. 3.2 m/s

H. 9.9 m/s

Please help will mark brainliest

Answers

h=10m-5m=5mm=90Kgg=9.8m/s^2

[tex]\\ \sf\longmapsto GPE=mgh[/tex]

[tex]\\ \sf\longmapsto GPE=90(5)(9.8)[/tex]

[tex]\\ \sf\longmapsto G PE=4410J[/tex]

Now

It's converted to kinetic energy while reaching ground.

[tex]\\ \sf\longmapsto K.E=4410[/tex]

[tex]\\ \sf\longmapsto \dfrac{1}{2}mv^2=4410[/tex]

[tex]\\ \sf\longmapsto 90v^2=8820[/tex]

[tex]\\ \sf\longmapsto v^2=98[/tex]

[tex]\\ \sf\longmapsto v=9.9m/s[/tex]

Done

Answer:

Hope it will help you a lot.

Why does the size of a white dwarf affect its visual luminosity?

Answers

Answer:

A typical white dwarf has a carbon and oxygen mass similar to the Sun, but is much smaller in size (similar to the Earth). It is much hotter (25,000 K), but because of its small size its luminosity is low. ... Some very nearby white dwarf stars can be observed directly through telescopes, though they are extremely faint.

Explanation:

when is atmospheric pressure 1x10 to the power of 5 and when is it pgh

Answers

Answer:

1 atmospheris pressure is equal to10.33 meter under water

Explanation:

right ??

A 30 g mass is attached to one end of a 10-cm-long spring.
The other end of the spring is connected to a frictionless pivot on
a frictionless, horizontal surface. Spinning the mass around in a
circle at 90 rpm causes the spring to stretch to a length of 12 cm.
What is the value of the spring constant?

Answers

The value of the spring constant of the spring is 14.7 N/m.

The given parameters;

mass attached to the spring, m = 30 glength of the spring, L₀ = 10 cmangular speed of the mass = 90 rpmfinal length of the spring, L₁ = 12 cm

The extension of the spring is calculated as follows;

[tex]\Delta x = L_1 - L_0\\\\\Delta x = 12 \ cm - \ 10 \ cm\\\\\Delta x = 2 \ cm = 0.02 \ m[/tex]

The value of the spring constant of the spring is calculated by applying Hooke's law;

[tex]F = mg = k\Delta x\\\\k = \frac{mg}{\Delta x } \\\\k = \frac{0.03 \times 9.8}{0.02} \\\\k = 14.7 \ N/m[/tex]

Learn more about Hooke's law here:https://brainly.com/question/4404276

A pendulum has a mass of 3 kg and is lifted to a height of 0.3 m. What is the maximum speed of the pendulum

Answers

The Energy of the pendulum is

mass*gravity*heigh--> 3kg*0.3m*9.81N/kg=8.829

And so the maximum speed is :

Energy=0.5*mass*speed*speed

reshape to speed:

Speed = 2.426 meters per secound

What is the minimum number of overload units such as heaters, trip coils, or thermal cutouts allowed for a three-phase AC motor's protection

Answers

The minimum number of overload units for a three-phase AC motor's protection is THREE (3). It is a polyphase motor.

Three-phase motors are polyphase motors, which can be induction motors or synchronous motors.

A three-phase motor is organized to run on three-phase alternating current (AC) electrical power, which is required for diverse industrial devices that use a lot of electrical energy.

These motors (three-phase motor) are composed of a stator (the outer part), a rotor (rotating part), and the enclosure (the external skeleton).

Learn more about three-phase motors here:

https://brainly.com/question/14329442

An object accelerates from rest to 93 m/s over a distance of 49 m. What acceleration did it experience?

Answers

Answer:

[tex]88.3ms {}^{ - 2} [/tex]

or 88.3m/s^2

Explanation:

Using suvat where we list everything that we are given

s=49m

u=0m/s

v=93m/s

a=?

t=we are not given this value, so we don't use

using a formula that doesn't involve time:

[tex]v {}^{2} = u {}^{2} + 2as[/tex]

rearranging to find acceleration by subtracting u^2 on both sides

[tex]v {}^{2} - u {}^{2} = 2as[/tex]

then dividing 2s on both sides

[tex] \frac{v {}^{2} - u {}^{2} }{2s} = a[/tex]

[tex] \frac{(93) {}^{2} - (0) {}^{2} }{2 \times(49) } = 88.3ms {}^{ - 2} [/tex]

so the acceleration is 88.3ms^-2 (1dp)

Change in inherited characteristics over time is called what?

Answers

Answer:

characteristics

Explanation:

Change in inherited characteristics over time is called what?Change in inherited characteristics over time is called what?Change iChange in inherited characteristics over time is called what?n inherited characteristics over time is called what?Change in inherited characteristics over time is called what?

Change in inherited characteristics over time is called what?Change in inherited characteristics over time is called what?Change in inherited characteristics over time is called what?

[tex] \color{blue}{ \sf lololololololol}[/tex]

Which of these ALL require direction? Force, Time, Acceleration Displacement, Velocity, Force Mass, Time, Speed Speed, Velocity, Distance



PLS ANSWER QUICK!!!!

Answers

Answer:

force, acceleration, displacement, velocity requires direction

a measure of change in velocity in a measure of time is

Answers

[tex]\\ \sf\Rrightarrow Acceleration=\dfrac{\Delta V}{t}[)tex]

In simplified form

[tex]\\ \sf\Rrightarrow Acceleration=\dfrac{dv}{dt}[/tex]

The rate of change of velocity with respect to time period is called acceleration.SI units-m/s^2
Other Questions
Which kind of symmetry does the word TOOT have?A. both vertical and horizontal line symmetryB. vertical line symmetry, onlyC. neither horizontal nor vertical line symmetryD. horizontal line symmetry, only Can someone plz help me? :) Read the excerpt from "The Return of a Private." Highlight the sentence that explains that Private Smith is the most physically weakened of the four veterans. A car travels 120 miles in 12 hours. What isthe car's speed?Select one:O a. 10 m/sb. 10 mphc. 1200 mphO d. 0.1 m/s what does research suggest about gender diversity and team productivity? Bigger beaks are dominant to smaller beaks. If a bird with a large beak (Bb) is blown to an island that requires smaller beaks, what is a possible genotype of its mate needed in order to produce an ospring with a smaller beak? show work! giving brainly! my teacher told me this was wrong, what's the correct answer? Disk scheduling algorithms in operating systems consider only seek distances because. Which statements best characterize communist beliefs? Select three answers Edge test i need help with this pleaseeeeeeee In the typing World 120 words in 3 minutes is average how many words could they type in 2 hours Find the sum of 12.351 and 0.5362 A visual piece of information is called a ___ source. Write an equation of the line that passes through the points (3,6) and (4,9) What was the most important factor that allowed the Minoans to become a great seagoing power?1. They had many natural harbors.2. They had shipbuilding expertise.3. They had the resources to build many ships.4. They had many allies in the region for support. Need help with how to write the standard form of a slope in general.Please explain, thank you! at one point in her career, lady gaga teamed up with the famous jazz singer tony bennet to produce an entire jazz album. Plsssssssss helppppppp can u answer this question? What is the quotient? 2 1/5/1-/10