Two nonnegative real numbers with a sum of 46 that have the largest possible product is 23 and 23.
Explanation
Any no's half when multiplied by itself gives the larges possible outcome also being the sum of the given no. as 46
Some trials
23 + 23 = 46 , 23 × 23 = 529
22 + 24 = 46 , 22 × 24 = 528
21 + 25 = 46 , 21 × 25 = 525
Hence, proven that Any no's half when multiplied by itself gives the larges possible outcome also being the sum of the given number.
What are real numbers?Any number that exists in the physical universe is a real number. Everywhere we look, we see numbers. Natural numbers are used to count things, while rational numbers are used to represent fractions,
irrational numbers are used to calculate a number's square root, integers are used to measure temperature, and so on. A group of real numbers is created by these various kinds of numbers.
Learn more about real number
https://brainly.com/question/17201233
#SPJ4
describe one tool or instrument, other than a thermometer, that works using the principle of thermal expansion.
The instrument, other than a thermometer, that works using the principle of thermal expansion is thermostat.
Thermostat is made up of two metals with differing expansion coefficients, Inver and Brass.
We employ it in an electrical device, it is straight at room temperature, if there is a short-circuit or any other issue and the circuit temperature suddenly rises, the thermostat's temperature will rise as well.
Thermal expansion, which typically excludes phase transitions, is the tendency of matter to change its area, volume, shape and density in response to a change in temperature. The material's coefficient of linear thermal expansion typically fluctuates with temperature and is calculated as the relative expansion divided by the change in temperature.
To learn more about thermal expansion, refer this link
https://brainly.com/question/15320204
#SPJ4
What is the potential difference between the plates of a 2.9-f capacitor that stores sufficient energy to operate a 75.0-w light bulb for one minute?
Answer:
Q = I t charge * time where I = charge / time
Q = V * C where Q is the charge stored on capacitor C
V C = I t
V = I t / C = 75 C/s * 60 sec / 2.9 farad = 1552 Volts
Note: farad = Coul / (J / Coul) = Coul^2 / J
The average distance between a planet and the sun is given by the ________ of its elliptical orbit.
The average distance between a planet and the sun is given by the Semimajor axis of its elliptical orbit.
All the planets present in our Solar System travel around the Sun in an elliptical orbits. Semimajor axis of its elliptical orbit is the longest semidiameter or one half of the major axis of the elliptical orbit.
The distance between the Sun and the planets can be easily calculated using the Equation of Motion. The average distance between Earth and the Sun, which is about 150 million kilometers. The average distance between a planet and the sun is given by the Semimajor axis of its elliptical orbit.
To Know more about Equation of Motion refer to the link:
https://brainly.com/question/25951773
#SPJ4
What phrase describes radioactivite decay
the splitting of a large nucleus into smaller nuclei is the phrase that describes radioactive decay
The process through which an unstable atomic nucleus loses energy through radiation is known as radioactive decay, also known as nuclear decay, radioactivity, radioactive disintegration, or nuclear disintegration. A substance with unstable nuclei is regarded as radioactive decay
The complete question is
Which phrase describes radioactive decay? (1 point)
the triggering of one reaction by the products of another
the joining of small nuclei into a laroid nucleus
o the splitting of a large nucleus into smaller nuclei
o the spontaneous emission of radiation
To learn more about radioactive decay:
https://brainly.com/question/23743292
#SPJ9
a ball is dropped from an upper floor, some unknown distance above your apartment. as you look out of your window, which is 1.50 m tall, you observe that it takes the ball 0.240 s to traverse the length of the window.
Height above the top of Tom's window the ball was dropped= 1.31m
Given that,
The height of window (s) = 1.50m
Time(t) = 0.240s
We have to find the height, and for this, we have to find the velocity using the equation of motion:
s = ut + 1/2 g[tex]t^{2}[/tex]
By putting the value of h and t in the equation
1.50 = u × 0.240 + 1/2 × 9.8 × [tex]0.240^{2}[/tex]
1.50 = u × 0.240 + 0.28224
u = (1.50 - 0.28224) / 0.240
u= 1.21776 / 0.240
u= 5.074
Now we have to calculate height by using the formula
[tex]v^{2}[/tex] = [tex]u^{2}[/tex] + 2gh
By putting the value of u and v we get
[tex]5.074^{2}[/tex] = 0 + 2 × 9.8 × h
h = [tex](5.074)^{2}[/tex]/ 2 × 9.8
h = 1.31 m
Therefore the height is 1.31 m above the window.
To know more about the equation of motion refer to the link given below:
https://brainly.com/question/18152494
#SPJ4
The complete question is:
A ball is dropped from an upper floor, some unknown distance above Tom's apartment. As he looks out of his window, which is 1..50 m tall, Tom observes that it takes the ball 0.240 s to traverse the length of the window. Determine how high ℎ above the top of Tom's window the ball was dropped. Ignore the effects of air resistance.
which of the following astronomers introduced the most widely accepted hypothesis regarding the origin of the solar system?
Astronomer who introduced the most widely accepted hypothesis regarding the origin of the solar system was Immanuel Kant in 1755.
What is solar system?The Solar System is gravitationally bound system of the Sun and objects that orbit it. It formed 4.6 billion years ago from gravitational collapse of a giant interstellar molecular cloud. The vast majority (99.86%) of system's mass is in the Sun, with most of the remaining mass contained in the planet Jupiter. Four inner system planets—Mercury, Venus, Earth and Mars—are terrestrial planets, being composed primarily of rock and metal. Four giant planets of the outer system are substantially larger and more massive than the terrestrials.
The two largest, Jupiter and Saturn, are gas giants, being composed mainly of hydrogen and helium; next two, Uranus and Neptune, are ice giants, being composed mostly of volatile substances with the relatively high melting points compared with hydrogen and helium, such as water, ammonia, and methane. All eight planets have nearly circular orbits that lie near the plane of the Earth's orbit, called the ecliptic.
There are an unknown number of smaller dwarf planets and the innumerable small Solar System bodies orbiting the Sun. Six of the major planets, six largest possible dwarf planets, and many of the smaller bodies are orbited by natural satellites, commonly called "moons" after Earth's Moon.
Two natural satellites, Jupiter's moon Ganymede and Saturn's moon Titan, are larger but not more massive than Mercury, smallest terrestrial planet, and Jupiter's moon Callisto is nearly as large. Each of the giant planets and some smaller bodies are encircled by the planetary rings of ice, dust and moonlets. The asteroid belt, which lies between orbits of Mars and Jupiter, contains objects composed of rock, metal and ice. Beyond Neptune's orbit lie Kuiper belt and scattered disc, which are populations of objects composed mostly of ice and rock.
To know more about orbit visit: brainly.com/question/18914648
#SPJ4
Can any word in this language be interpreted as a string of elements from s in two different ways?
No, the words can be interpreted in one way only:
* If the word is consisting of only a's, it can be factored in one way as groups of (aa).
* If there is a single b (or the first b), then
if there is an even number of a's (including 0) before the b, this b is denoted as the start of (baa) and the a's before it is factored in one way as groups of (aa).
if there is an odd number of a's before the b, this b is a part of (aba) and the a's before it is factored in one way as groups of (aa).
* If there is a second b, then if the first b was denoted as a part of (baa), then if there is an even calculated numbers of a's between the b's, then
the second b is part of (baa), and the a's in between are factored in just one way as groups of (aa).
if there is an odd number present that is a's between the b's, then
this second b is denoted as a part of aba, and the a's in between are factored to be in one way as groups of (aa).
if the first b was part of (aba), then
if there is taken to be an even number of a's between the b's, then
the second b is part of (aba), and the a's in between are factored in one way as groups of (aa).
if there is an odd number of a's between the b's, then
the second b is a part of (baa), and then the a's in between are factored in a one way denoted as groups of (aa).
The same argument can be used for words containing more than 2 b's.
To know more about string of elements, visit:
https://brainly.com/question/13615356
#SPJ4
Newton’s second law relates an object’s acceleration to its mass and the net force acting on it. Does newton’s second law apply to a situation in which there is no net force? select the best explanation.
Newton's second law does apply to a situation in which there is no net force as having a net force of zero will produce an acceleration having 0.
According to Newton's second law, the acceleration of an object depends upon two variables- the mass of the object and the net force acting on the object. Here, the acceleration of an object is directly proportional to the force acting on it and inversely proportional to the mass of that object. The net force applied is equal to the sum of all the forces acting on an object.
In a situation where the net force applied is zero, the object having a mass would have zero acceleration. This means that the object would have zero velocity and would be constant.
This depicts that Newton's second law can be applied to every situation where there is a net force applied, or not. Even if there is no net force, this law can still be applied.
To know more about acceleration, refer to the following link:
https://brainly.com/question/460763
#SPJ4
A metal bowl with a weight of 1.05 n is placed in a larger kitchen container filled with soybean oil. how much soybean oil must the bowl displace in order to float? for reference, the mass density of soybean oil is about 917 g/liter and its weight density is about 8,99 n/liter. please give your answer in liters
The volume of soybean oil displaced by the boat to float is 0.00011 liters or 1.1 x 10^-4 liters.
An object floating in a liquid follows Archimedes’ Principle.
According to the Archimedes Principle, the amount of fluid displaced by the body is equal to its weight.
So, the buoyant force applied by the liquid should be equal to the weight of the bowl.
Hence
Weight of bowl = Buoyant Force of Soybean Oil
Mg = V(ρ)(g)
Here V = volume of soybean oil
ρ = density of soybean oil
1.05 = V x 917 x 9.8
The volume(V) comes out to be 0.00011 liters.
Thus, the volume of soybean oil displaced by the bowl to float is 0.00011 liters or 1.1 x 10^-4 liters.
To know more about "buoyant force", refer to the following link:
brainly.com/question/21990136?referrer=searchResults
#SPJ4
calculate the moment of inertia of a skater given the following information. the 58.0–kg skater is approximated as a cylinder that has a 0.102–m radius.
The Moment of Inertia of skater of mass 58 Kg with approximated radius of 0.102 m will be 0.301 kg m².will be 0.301 kg m².
We have a 58 kg skater who is approximated as a cylinder that has a radius of 0.102 m.
We have to determine the Moment of Inertia of the of the skater.
What is Moment of Inertia? What is its general formula?Moment of inertia is the property of the body by which it resists angular acceleration. The general formula of Moment of Inertia is given by -
I = Σ m[i] r[i]².
According to the question -
Mass of skater = 58 Kg
Radius = 0.102 m
Now, the moment of inertia of the cylinder about the axis of cylinder is -
I = 1/2 MR²
I = 0.5 x 58 x 58 x 0.102 x 0.102
I = 1682 x 0.010404
I = 0.301 kg m²
Hence, the Moment of Inertia of skater of mass 58 Kg with approximated radius of 0.102 m will be 0.301 kg m².
To solve more questions on Moment of Inertia, visit the link below-
https://brainly.com/question/14220040
#SPJ4
Were both sides of the single magnet attracted to the metal surface? use your results to support your answer.
YES both sides of the single magnet attracted to the metal surface because metals are not paramagnetic magnets, temporary magnetism can be induced in metal by bringing a magnet close to it . The pole of metal surface will be such that it is attracted by the magnet.
From result: A1 and A2 both side of magnet attract to metal surface.
when one magnet is removed from stack, magnetic poles of stack will not change because stack consist of many mgnet , after removing one magnet from stack pole strength of stack will reduce but pole of stack will remain same.
From result:
When A side of To know more about standard light intensity visit : https://brainly.com/question/13003361
#SPJ4interact with stack , they attract each other and after removal of one magnet from stack, stack repel with other side A2 of magnet. hence stack pole has not changed after removal of one magnet from it.
Initial most propble speed Vi= [tex]\sqrt 2RT/M[/tex]
To know more about magnet visit : https://brainly.com/question/2841288
#SPJ4
a rigid tank contains an ideal gas at 40°c that is being stirred by a paddle wheel. the paddle wheel does 200 kj of work on the ideal gas. it is observed that the temperature of the ideal gas remains constant during this process as a result of heat transfer between th
The total entropy generation is 0.67 kJ/K
CalculationSince there is no increase in the temperature of the gas, so according to the 1st law of thermodynamics
δQ=dU+δW
⇒ δQ=δW=200KJ
Then here dU is zero because the temperature is constant.
Now, S2−S1=∫[tex]\frac{δQ}{T}[/tex]+ Sgen
Here as it can be seen, there is no increase in the temperature of the gas. So, here we apply the first law of thermodynamics.
∴ S2−S1=0
⇒ Sgen= [tex]-\frac{(-200)}{(27+273)}[/tex] = [tex]\frac{200}{300}[/tex] = 0.67kJ/K
What is the first law of thermodynamics?The first law of thermodynamics expresses that the entire energy of the universe remains the same. Even though the energy can be exchanged between the system and its surroundings, it can never be created not destroyed.
To know more about thermodynamics, visit:
https://brainly.com/question/1604031
#SPJ4
a 1550 kg car located at 275, 0, 0 m has a momentum of 46000, 0, 0 kg · m/s. what is its location 11 s later? (express your answer in vector form.) rf
The location of the car after 11 seconds will be 445.05 m.
Mass of the car = 1550 kg
The momentum of the car = 46000
Distance of the car = 275 m
The velocity of the car is,
Momentum = Mass × Velocity
M = m × v
[tex]v = \frac{M }{m}[/tex]
[tex] = \frac{46000}{1550} [/tex]
= 29.67 m/s
The velocity of the car is 29.67 m/s.
The location of the car after 11 seconds will be,
[tex]Velocity = \frac{ Distance}{ Time}[/tex]
[tex]v = \frac{d}{t} [/tex]
d = v × t
= 29.67 × 15
= 445.05 m
Therefore, the location of the car after 11 seconds will be 445.05 m.
To know more about momentum, refer to the below link:
https://brainly.com/question/904448
#SPJ4
Modifying games is one way to level the playing field for individuals of varying abilities provide four examples of how you could modify the game of baseball
It has been demonstrated that modified sports, in which the equipment and rules are altered to improve skill performance, foster skill learning and may even boost participation.
The sport is replicated in a modified game, although some of the regulations are altered. Limited touches or time with the ball, a smaller field or court, different-sized balls or goals, or the obligation to defend repeatedly are some examples of modified rules. Like any other sport you may have played, such as basketball or football, modified sports feature regulations that have been modified to take into account the talents and abilities of older or less mobile participants. Depending on the skills of the participants who want to participate, modified sports can be altered.
Learn more about sport here-
https://brainly.com/question/14947479
#SPJ9
A transverse wave travels along a string. where are the points of maximum kinetic energy? at the points of zero displacement at the points of extreme displacement
A transverse wave travels along a string. where are the points of maximum kinetic energy.
At instantaneous t=T/4 and t=3T/4, the incident wave travels a distance threeλ/4 to the right and the pondered wave travels the equal distance at the string to the left. transverse The equal path difference some of the waves is lambda/2 or threeλ/2. therefore, crest of 1 wave falls on trough of the opposite and vice-versa. the resultant displacement at all factors is 0 and is represented via thick horizontal line in determine. transverse, all of the particles are passing simultaneously via their suggest position, however in a route opposite to the path at t=T/four.what's the temperature you want in Kelvin to start fusing hydrogen to heliumas the protostar profits mass, its middle receives hotter and extra dense. in some unspecified time in the future, transverse it's miles going to be hot sufficient and dense enough for hydrogen to begin fusing into helium. It needs to be 15 million Kelvin within the middle for fusion to start.Learn more about transverse https://brainly.com/question/13618693
#SPJ4
calculate the deceleration of a snowboarder going up 5° slope assuming to go fission affection for waxed wet on wet snow
The deceleration of a snowboarder going up is 1.8 m / s²
We know that,
F = m * a
[tex]f_{k}[/tex] = μ[tex]_{k}[/tex] * [tex]F_{N}[/tex]
F = Force
m = Mass
a = Acceleration
[tex]f_{k}[/tex] = Kinetic frictional force
μ[tex]_{k}[/tex] = Co-efficient of kinetic friction
[tex]F_{N}[/tex] = Normal force
θ = 5°
μ[tex]_{k}[/tex] = 0.1
Since the snowboarder is going up the hill at an angle of 5°, the weight of the snowboarder does not align with the traditional y-axis direction. So resolving the weight into horizontal and vertical components.
sin 5° = - [tex]W_{x}[/tex] / W
[tex]W_{x}[/tex] = - W sin 5°
cos 5° = - [tex]W_{y}[/tex] / W
[tex]W_{y}[/tex] = - W cos 5°
[tex]f_{k}[/tex] = 0.1 ( [tex]W_{y}[/tex] )
[tex]f_{k}[/tex] = - 0.1 ( W cos 5° )
Σ [tex]F_{x}[/tex] = m [tex]a_{x}[/tex]
[tex]W_{x}[/tex] + [tex]f_{k}[/tex] = m [tex]a_{x}[/tex]
- W sin 5° - 0.1 ( W cos 5° ) = m [tex]a_{x}[/tex]
- W ( sin 5° + 0.1 cos 5° ) = m [tex]a_{x}[/tex]
- m g ( sin 5° + 0.1 cos 5° ) = m [tex]a_{x}[/tex]
- 9.8 ( sin 5° + 0.1 cos 5° ) = [tex]a_{x}[/tex]
[tex]a_{x}[/tex] = - 1.8 m / s²
Deceleration is the negative acceleration. When an object slows down it has deceleration. Kinetic friction is the frictional force created due to an object's motion.
Therefore, the deceleration of a snowboarder going up is 1.8 m / s²
To know more about deceleration
https://brainly.com/question/4403243
#SPJ1
chanice drives her scooter 7 kilometres north. she stops for lunch and then drives 5 kilometres east. what distance did she cover? what was her displacement?/8
By using vector
a. the distance traveled is 12 kilometres
b. the resultant displacement is (7 i + 5 j) kilometres
We need to know about vectors to solve this problem. Vector has magnitude and also direction. Displacement is included in vector. It can be written as
s = sx i + sy j + sz k
where s is displacement, sx is displacement on x-axis, sy is displacement on y-axis and sz us displacement on z-axis.
From the question above, we know that
east = positive x
south = negative y
west = negative x
north = positive y
s1 = 7 j
s2 = 5 j
The distance traveled is
s = s1 + s2
s = 7 + 5
s = 12 kilometres
The resultant displacement is
s = s1 + s2
s = 7 i + 5 j
s = (7 i + 5 j) kilometres
Find more on vector at: https://brainly.com/question/25811261
#SPJ4
the particle travels with a constant speed of 300 mm>s along the curve. determine the particle’s acceleration when it is located at point (200 mm, 100 mm) and sketch this vector on the curve.
The correct answer 322mm/s^2.
The growing x-axis, symbolised by i shows the direction of the velocity. Since integration and differentiation can be used to solve problems of this nature, it is recommended for students to study and comprehend their fundamental processes.
v=300mm/s
a_t=dv/dt=0
y=20(10^3)/x ____(1)
For x=200
dy/dx|x=200 = - 20(10^3)/(200)^2
dy/dx|x=200=-0.5
Now differentiating equation (1) with respect to x again
d^2y/dx^2|(x=200)=40(10^3)/(200)^3
d^2y/dx^2|(x=200)=5(10^-3)
Write the expression of ρ.
ρ=(1+(dy/dx)^2)^3/2/|d^2y/dx^2|
substitute the values,
ρ=(1+(0.5)^2)^3/2/5(10^-3)
ρ=279.5mm
Write the expression of the radial acceleration.
a_n=v^2/ρ
a_n=(300mm/s)^/279.5mm
a_n=322mm/s^2
Understand that the tangential acceleration is zero. Thus, write the expression of the net acceleration.
a=√a_t^2+a_n^2
a=√((0mmm/s^2)^2+(322mm/s^2)^2
a=322mm/s^2
Understand that the given information,
dy/dx=-0.5
tanθ=-0.5
θ=26.6(anticlockwise)
Draw the calculated vector on the curve.
To learn more about particle’s acceleration refer the link:
https://brainly.com/question/3929017
#SPJ4
a spring-loaded gun can fire a projectile to a height h if it is fired straight up. if the same gun is pointed at an angle of 45° from the vertical, what maximum height can now be reached by the projectile?
Answer
1/2 m v^2 = m g H by conservation of energy for an object fired straight up or
H = v^2 / (2 * g)
For an object traveling at 45 deg then
Vy = V sin 45 = 2^1/2 / 2 * V
So now
H = 1/2 * v^2 / (2 * g) = v^2 / (4 * g)
and the projectile will travel H / 2 instead of H
Is the magnetic field inside the loop increasing in strength, decreasing in strength, or steady?
There is a induced current in the conducting loop shown in the figure. According to the Lenz law, the magnetic field inside the loop is decreasing in strength.
State Lenz law.
The induced electromotive force (emf) with different polarities induces a current whose magnetic field opposes the change in magnetic flux through the loop in to ensure that the original flux is maintained throughout the loop when the current flows in it.
How is Lenz’s law conservation of energy?
Lenz’s law is based on the law of conservation of energy. The induced current is always opposed by the cause that produces it. Hence, there is extra work done against the opposing force. The work done against the opposing force results in the change in the magnetic flux and hence the current is induced. Hence the law of conservation of energy is satisfied.
To learn more about Lenz Law, refer to:
brainly.com/question/12876458
#SPJ4
Sodium is a metal and chlorine is a gas. Is sodium chloride (table salt) is there a gas or a metal like the elements it's made of?
A. Yes
B. No, it has completely different properties
Answer:
B. No, it has completely different properties
Explanation:
Sodium Chloride itself is not an element, but an ionic compound composed of two different elements.
Scientists are trying to create plasma in
An ionized plasma can be created in cyclotron with the help of superimposition of static magnetic field and electromagnetic field.
What is Plasma?Plasma is superheated matter. It is so hot that the electrons are ripped away from the atoms forming an ionized gas. It comprises over 99% of the visible universe.
Given in the question is about Plasma, which is also fourth state of matter.
Scientists are trying to create Plasma in cyclotrons. Cyclotron is a device that propels a beam of charged particles in a circular path. It is also called particle accelerator. Electron cyclotron resonance (ECR) occurs when the natural frequency of the rotating electrons coincides with the frequency of incident radiation. One method to produce ionized plasma is to superimpose a static magnetic field with the high frequency Electromagnetic field at the electron cyclotron resonance frequency.
Therefore, an ionized plasma can be created in cyclotron with the help of superimposition of static magnetic field and electromagnetic field.
To solve more questions on Plasma, visit the link below-
https://brainly.com/question/950535
#SPJ1
What do i observe if i take my largest plastic shopping bag square between the light source and the wall
The take my largest plastic shopping bag square between the light source and the wall
The shadow is typically smaller.absolutely no shadowThe shadow is either clear or hardly there.Rays of light can travel through the cardboard when I hold my largest cardboard square between the light source and the wall, but because the cardboard is not very thick, the light can still pass through and create a shadow.
Do cardboard sheets block light?
Based on the precise materials and light sources that were employed, the results of the cardboard experiment frequently differ.
Keep in mind that it is generally expected that reflective materials, such aluminium foil and mirrors, would reflect the specified or given light.
Since the cardboard is not very thick, light rays do penetrate when I hold my largest cardboard square between the light source and the wall. As a result, the cardboard tends to cast a shadow when held in this position.
To learn more about cardboard refer the link:
https://brainly.com/question/9697402
#SPJ4
3. If the current is 6 A and the voltage is 420 V, calculate the resistance
If the current is 6A and the voltage is 420 V, the resistance is 70ohms.
How to calculate resistance?Resistance is the opposition offered by an electrical conductor to the flow of a current through itself, resulting in a conversion of electrical energy into heat and radiation.
The resistance of a current can be calculated using the following formula;
V = IR
Where;
V = voltage R = resistanceI = currentAccording to this question, a current of 6 A and the voltage of 420V is given. The resistance is as follows:
420 = 6 × R
R = 420/6
R = 70 ohms
Therefore, If the current is 6A and the voltage is 420 V, the resistance is 70ohms.
Learn more about resistance at: https://brainly.com/question/4289257
#SPJ1
Which of the following elements is likely to form an ionic bond with potassium?
Chlorine is likely to form an ionic bond with potassium.
A chemical bond is a strong bond that can be formed between atoms, ions, or molecules to generate chemical compounds. The bond may be created by the sharing of electrons in covalent bonds or by the electrostatic attraction of two oppositely charged ions, as in ionic bonds.
The main interaction in ionic compounds is ionic bonding, a type of chemical bonding that involves the electrostatic attraction between two atoms or ions with dramatically differing electronegativities.
When a metal and a non-metal react, an ionic bond is created.
To establish an ionic bond, the metal loses electrons (donates them), whereas non-metals receive electrons (accept them).
Chlorine (Cl) is a non-metal, whereas potassium is a metal. As they interact to create an ionic bond, potassium donates one electron while chlorine accepts one.
The correct option is (A).
Learn more about ionic bond here:
https://brainly.com/question/13526463
#SPJ9
If the dark adapted eye has a pupil diameter of 7.0 mmmm , how many photons per second enter the eye from the star? assume the starlight has a wavelength of 550 nmnm .
1562.2 photons per second enter the dark adapted eye has a pupil from the star.
What is wavelength?A waveform signal's wavelength, which is the distance between two identical locations (adjacent crests) in the succeeding cycles, determines whether it is sent over space or via a wire. In wireless systems, this length is frequently specified in metres (m), centimetres (cm), or millimetres (mm) .
energy of each photon
E = hc/ lamda
E = 3.61 * 10 to power -19J
N, the number of photons that enter each second
NE = P
N = P/E
N = 1562.2 photons/sec
to learn more about wavelength go to -
https://brainly.com/question/10728818
#SPJ4
15. The speed of light is very close to 300,000 km/s. The planet Jupiter is around
741 million km from the Sun. How long does it take for light from the Sun to reach
Jupiter?
Answer:it take light sun jupitor bang ding ow 3 seconds beofre bang bing boom
Explanation:
The average atomic mass of 6li and 7li are 6.0151 amu and 7.0160 amu, respectively. calculate the natural abundances of 6li. the average atomic mass of li is 6.941 amu.
Average atomic mass = f1M1 + f2M2 +… + fnMn
where f is the fraction representing the natural abundance of the isotope and M is the mass number (weight) of the isotope.
let x be the fraction of ^6li ,
then fraction abundance of [tex]^7li[/tex] will be (1-x)
now applying above equation:
6.941 = x × 6.0151 +(1-x) 7.0160
1.0009x = 0.075
x = 0.0749
so % of [tex]^6li[/tex]= 7.49%
% of [tex]^7li[/tex]= 92.50%
Average Atomic Mass is the average mass of an element based on the percent abundance of each isotope of that element. (atoms with different number of neutrons, but same number of protons).To know more about Average Atomic Mass visit : https://brainly.com/question/13753702
#SPJ4
A car, travelling at 25 m/s, starts to accelerate uniformly at 3 m/s2 for 80 m.
A car, travelling at 25 m/s, starts to accelerate uniformly at [tex]3m/s^2[/tex]for 80 m.
The final velocity will be:
[tex]\sqrt{1105} m/s[/tex]
How to find the final velocity?
We will use Newton's third law.
[tex]v^2-u^2=2as[/tex]
where,
v = final velocity
u = initial velocity
a = acceleration
s = distance
Substituting the values, we get:
[tex]v^2=480+625=1105\\v=\sqrt{1105}[/tex]
To learn more about newton's third law of motion, refer to:
brainly.com/question/15507
#SPJ4
High temperature and pressure tend to favor flow rather than breakage, so it is surprising that large, very deep earthquakes are sometimes observed, occurring in warm places where the pressure is high. What is accurate about these rare, deep earthquakes?.
They happen at subduction zones, where shifting mineral assemblages appear to "implode" as a result of increased pressure on the rock as it is subducted deeper.
The notion that is currently preferred is "Implosion." The building blocks often reorganize to take up less space as subduction zones move rocks deeper where pressure is stronger, moving from, say, a one-on-top-of-another pattern to a fit-in-the-gap-between-those-below pattern. This might sometimes seem to happen gradually before happening abruptly (I can't move till my neighbor does...), resulting in an implosion. Where temperatures and pressures are just so high that we don't imagine rocks can break, the largest, deepest earthquakes occur. Nowhere near as deep as the earthquakes, humans have never dug a hole. Atomic bomb testing has mostly ended. A large earthquake is also much larger than a large atomic weapon.)
To know more about earthquake refer to https://brainly.com/question/18947658
#SPJ4