Answer:
Combustion
Explanation:
The reaction involves the synthesis of water and carbon dioxide.
Is this balanced ?2 Fe(NO3)3 + 3 MgSO4 → 3 Mg(NO3)2 + 2 Fez(SO4)3
it shoudl be : 2Fe(NO3)3 + 3MgSO4 → 3Mg(NO3)2 + Fe2(SO4)3
(the difference is Fe2(SO4)3 has no coefficient)
A mole of oxygen and a mole of hydrogen (at STP) have all of the following in common EXCEPT
Answer:
Root mean squared velocity is different.
Explanation:
Hello!
In this case, since we have a mixture of oxygen and nitrogen at STP, which is defined as a condition whereas T = 298 K and P = 1 atm, we can infer that these gases have the same temperature, pressure, volume and moles but a different root mean squared velocity according to the following formula:
[tex]v_{rms}=\sqrt{\frac{3RT}{MM} }[/tex]
Since they both have a different molar mass (MM), nitrogen (28.02 g/mol) and oxygen (32.02 g/mol), thus we infer that nitrogen would have a higher root mean squared velocity as its molar mass is less than that of oxygen.
Best regards!
A mole of oxygen and a mole of hydrogen (at STP) don't have common root mean square velocity.
What is root mean square velocity?Root mean square velocity of any gas is calculated as:
Vr = √3RT / M, where
R = universal gas constant
T = temperature,
M = molar mass
As in the question it is given that amount of gases are taken in standard condition i.e. 273 K temperature and 1 atm pressure, but mass of hydrogen and oxygen is different. So the resultant root mean square velocity of hydrogen and oxygen gas is different.
Hence, root mean square velocity of hydrogen and oxygen gas is different at STP.
To know more about root mean square velocity, visit the below link:
https://brainly.com/question/15995507
An ore is a combination of a metal and another element. TRUE OR FALSE
Answer:
Explanation:
ℎ ℎ
If you divided one regtangle into ten smaller regtangles and then each of those into ten each of the smallest regtangles is?
Answer:
0.01.
Explanation:
This is because, if you divided one rectangle by ten, it will give 0.1
That is 1/10 = 0.1
If each of the smaller rectangles is divided by 10.
It will be 0.1/10 which will be equal to 0.01.
The rectangles will be 0.01 each.
Earth
Moon
SUN
Based on the diagram above, what moon phase would most likely be occurring?
What are ancient plants and animal formed into rocks called it is a 7 letter word that starts with f
Answer:
Fossils
Explanation:
Ancient plants and animal formed into rocks called fossils.
A fossil can be defined as the mineral impression or remains of living organisms such as plants and animals that are prehistoric in nature.
A geologic column can be defined as a collection of rock layers that are typically grouped based on their relative ages in a descending order i.e from oldest to the youngest.
Generally, the layers of the rock that are found in various parts of the world are known to be different because they all comprises of distinct Earth's geological history (fossils).
11.
Which of these statements is true about the two graphed parallelograms?
A
B
8
6
A
4
B'
D
C
2
D
C'
-6
2
4
6
-2.
-2
-4
-6
-8 +
A
They are similar, because one can be obtained by dilating the other about the origin with a scale factor of
Answer:
Explanation:
dfghyuiop[]5565677dam u baddie no comparing
A sample of a pure element has a mass of 45.6g and contains 4.19 x 10 23 atoms. Identify the element.
ZINC
Explanation:To identify the element based on the informartion given, we have to find the molar mass since this mass is unique to each element.
Molar mass = mass ÷ moles
We already know the mass based on the question, as such we now need to find the # of moles.
Since 1 mole contains 6.02214 × 10²³ atoms
then let x moles contain 4.19 × 10²³ atoms (given in the question)
⇒ x = (4.19 × 10²³ atoms × 1 mol) ÷ 6.02214 × 10²³ atoms
x = 0.69577 mol
Now that we have the moles we can substitute it into the molar mass equation and solve for the molar mass.
⇒ molar mass = 45.6 g ÷ 0.69577 mol
⇒ molar mass ≈ 65.54 g/mol
This molar mass is closest to that of ZINC.
(I ONLY HAVE 15 MIN LEFT IN MY TEST PLEASE HELP ME!!)
If 107 g of a substance reacts with 76 g of another substance, what will be the mass of the products after the reaction
Answer:
183g
Explanation:
mass can't be created or destroyed so i think you just add up the total amounts of matter
1. Which of the five types of reactions is taking place in the whoosh bottle? Justify your answer with evidence from the video.
Answer:
Other times I place a candle in water and cover it with a glass jar .
Explanation:
only to ... Many of you may already know this as the Whoosh Bottle demo due ... I have used this demo in the past for topics like exothermic reactions, combustion reactions, ... This adds to the evidence of a partial vacuum created in the bottle
The freezing point of pure water is 0 °C (32 °F). How do you think adding salt to water affects its freezing point?
Mechanism of aspirin by salicyclic acid reacts with acetic acid ? Mechanism of benzoic acid from benzamide?
Answer:
See explanation
Explanation:
The synthesis of aspirin is shown in the reaction scheme attached to this answer. The production of aspirin involves the reaction of acetyl salicyclic acid and acetic anhydride. HA in the reaction mechanism refers to an acid that is used in the reaction
Similarly benzamide, is converted to the carbonyl carbocation by reaction with acid. The -NH2 group is protonated and subsequently departs as a leaving group. An OH^- completes the mechanism forming a carboxylic acid. The movement of electrons is shown in the image attached.
Again, the diazotization of benzamide using sodium nitrate and concentrated HCl yields benzene diazonium chloride. Addition of water to benzene diazonium chloride yields the benzoic acid and nitrogen gas.
please help, i will give brainlist, I'm desperate
Answer:
hydrogen
Explanation:
this is a reaction between to elements your other element would consist of deuterium but since you pick one you pick the only elemnt that creates this newclear fusion.
Number 2 plsssssssssssss
True or false: Sometimes older rocks end up on top of younger rocks.
Answer:
true
downstream to the riverbed. However, the most common mechanism to produce older rocks on top of younger is by thrust faulting. Thrust faults form where rocks are being compressed, usually by plate tectonic mechanisms. Thrust faults rip up older strata and pile it on top of younger rocks.
Explanation:
What is the independent
variable in this lab?
temperature
distance
thermal conductivity
time
specific heat
Answer:
time
Explanation:
time can be controlled and set while all the others can't be necessarily controlled
helpppppp plssssssss does anyone know this ? what type of structure is shown in the diagram?
Answer:
the structure of atom which discovered by Thomson the describe on how the sub-atomic particles are arranged in an atom
What type of reaction takes place in the equation below:
C2H5OH + O2 CO2 + H2O
Answer:
Im pretty sure its Combustion
A closed gas system initially has volume and pressure of 6400mL and 1.49atm with the temperature unknown. If the same closed system has values of 657 torrs, 9660mL, and 2450C, what was the initial temperature in K?
Answer: The initial temperature was 588 Kelvin
Explanation:
The combined gas equation is,
[tex]\frac{P_1V_1}{T_1}=\frac{P_2V_2}{T_2}[/tex]
where,
[tex]P_1[/tex] = initial pressure of gas = 1.49 atm
[tex]P_2[/tex] = final pressure of gas = 657 torr = 0.864 atm (760 torr = 1atm)
[tex]V_1[/tex] = initial volume of gas = 6400 ml
[tex]V_2[/tex] = final volume of gas = 9660 ml
[tex]T_1[/tex] = initial temperature of gas = ?
[tex]T_2[/tex] = final temperature of gas = [tex]245^0C=(245+273)K=515K[/tex]
Now put all the given values in the above equation, we get:
[tex]\frac{1.49\times 6400}{T_1}=\frac{0.864\times 9660}{515}[/tex]
[tex]T_1=588K[/tex]
The initial temperature was 588 Kelvin
Did the evidence produced by Thomson's investigations with the cathode ray tube
support Dalton's atomic theory?
Answer:
maybe maybe maybe maybe
Which of the following is the chemical formula for an acid?
- NHO3 (aq)
- NaOH (aq)
- NH3 (g)
- HCl (g)
- SCl2 (g)
Why?
Answer:
NH3 and HCl
Explanation:
NH3 and HCl are acids because of their hydrogen ions. NHO3 and NaOH are bases (you can tell because they have an OH). I don't believe SCl2 is an acid or a base
How does the concentration of reactants affect the rate
of Chemical reaction? explain in short
Answer:
The increase in the concentration of reactants increases the frequency of effective collisions.
Explanation:
The concentration of reactants determines the rate of reaction by providing the number of reactants available to yield an effective collision. There is a direct relationship between the concentration of reactants and rate of reaction.
A friend insists that using an electric drill in his flooded basement is safe because, he says, “Water doesn’t conduct electricity.” What would you say to your friend?
Answer:
I will say to my friend that
pure or distilled water does not conduct electricity
but instead of this.
water conduct electricity
be aware of it
Water conservation is important for which of the following reasons?
A. Demand for water is increasing.
B. Water treatment is expensive.
C. Pollution is likely to decrease water supply in the future.
D. All of the above
D
all of above becuase it's all conservation
Answer:
The answer is c which is pollution is likely to decrease water supply in the future
In a few sentences describe what this weather map tells you about the weather pls answer this it’s due at 10 pm tonight
Answer:
I dont know im very sorry
A sample of hydrogen gas has an initial temperature of 50° C. When the temperature is lowered to -5° C, the volume of hydrogen becomes 212 cm^3. What was the initial volume of the hydrogen in cm^3 when the pressure is kept constant?
Answer:
255.51 cm³
Explanation:
From the question given above, the following data were obtained:
Initial temperature (T₁) = 50° C
Final temperature (T₂) = –5° C
Final volume (V₂) = 212 cm³
Initial volume (V₁) =?
Next, we shall convert celsius temperature to Kelvin. This can be obtained as follow:
T(K) = T(°C) + 273
Initial temperature (T₁) = 50° C
Initial temperature (T₁) = 50° C + 273
Initial temperature (T₁) = 323 K
Final temperature (T₂) = –5° C
Final temperature (T₂) = –5° C + 273
Final temperature (T₂) = 268 K
Finally, we shall determine the initial volume of the hydrogen gas. This can be obtained as follow:
Initial temperature (T₁) = 323 K
Final temperature (T₂) = 268 K
Final volume (V₂) = 212 cm³
Initial volume (V₁) =?
V₁/T₁ = V₂/T₂
V₁ / 323 = 212 / 268
Cross multiply
V₁ × 268 = 323 × 212
V₁ × 268 = 68476
Divide both side by 268
V₁ = 68476 / 268
V₁= 255.51 cm³
Therefore, the initial volume of the hydrogen gas 255.51 cm³
When a 8 gram slice of bread is burned under a beaker of 4500 grams of water, it heats up the water by 1.3 degrees Celsius. The specific heat of water is 1 cal/g degree C. How many calories does this slice of bread contain
Answer:
[tex]5850\ \text{cal}[/tex]
Explanation:
m = Mass of water = 4500 g
c = Specific heat of water = [tex]1\ \text{cal/g}^{\circ}\text{C}[/tex]
[tex]\Delta T[/tex] = Change in temperature of water = [tex]1.3^{\circ}\text{C}[/tex]
Heat is given by
[tex]q=mc\Delta T\\\Rightarrow q=4500\times 1\times 1.3\\\Rightarrow q=5850\ \text{cal}[/tex]
A slice of the bread contains [tex]5850\ \text{cal}[/tex].
Science question: Which beat summarized the scientific process that led to our current understanding of DNA?
1 each scientist made an important but unrelated contribution
2. Scientists built on the previous work of other scientists to make new discoveries
3 and 4 are too long
Answer:
2
Explanation:
in terms of cells, it exists from previous existing cells, that means scientist are built up by the work of other scientist
Answer:
the answer is B
Explanation:
write the electronic configuration of an Na+ and CL-1
Answer:
Na+ lost one electron: 1s2 2s2 2p6
Cl- gained an electron: 1s2 2s2 2p6 3s2 3p6
Explanation:
Using the reaction C12H22O11 + 12 O2 ->12CO2 + 11H2O (e). How many grams of carbon dioxide can be produced from 456.7g sucrose
Answer:
704.6 g CO2
Explanation:
MM sucrose = 342.3 g/mol
MM CO2 = 44.01 g/mol
g CO2 = 456.7 g sucrose x (1 mol sucrose/MM sucrose) x (12 moles CO2/1 mol sucrose) x (MM CO2/1mol CO2) = 704.6 g CO2